Toshiba e-Studio 400P
Рейтинг
Модули
Cabling diagrams 2
High-capacity feeder 5
Paper feed-alignment
Printhead
Cabling diagrams 3
250-sheet paper tray
COVERS
Electronics-shields
StapleSmart finisher 3
Drives-Main drive and developer drive
Electronics-power supplies
High-capacity feeder 2
StapleSmart finisher 2
Paper feed-autocompensator
StapleSmart finisher 4
Cabling diagrams 1
Electronics-card assemblies
500-sheet paper tray 2
Frame 2
Paper feed-multipurpose feeder
Transfer/charging
High capacity feeder 4
Frame 1
Hot roll fuser
StapleSmart finisher I
Duplex option
500-sheet paper tray
High-capacity feeder
Kiosk-vertical paper adapter
Kiosk-horizontal paper adapter
Envelope feeder
250-sheet paper tray 2
High-capacity feeder 3
Integrated paper tray-500-sheet
Детали 250-sheet paper tray
| Деталь: | Switch, cover closed w/cable assembly |
| Парткод: | 56P1394 |
| Деталь: | Cable, front harness (HVPS/input sensor/toner sensor) |
| Парткод: | 56P1385 |
| Деталь: | Switch, cover closed |
| Парткод: | 56P1395 |
| Деталь: | Sensor, MPF cable |
| Парткод: | 56P1398 |
| Деталь: | MPF solenoid w/cable |
| Парткод: | 99A2438 |
| Деталь: | Smart contact assembly w/cable |
| Парткод: | 56P1399 |
| Деталь: | Cable, deflector |
| Парткод: | 56P1389 |
| Деталь: | Parts packet, screw (auto comp assembly mounting) |
| Парткод: | 99A0263 |
| Деталь: | Arm assembly, pick 2000 |
| Парткод: | 99A1055 |
| Деталь: | Roll assembly, pick |
| Парткод: | 99A0070 |
| Деталь: | Base, 2000 option |
| Парткод: | 99A0692 |
| Деталь: | Parts packet, screw (deflector mounting) |
| Парткод: | 99A0263 |
| Деталь: | Cable, paper low switch |
| Парткод: | 99A0717 |
| Деталь: | Cable, lower limit switch |
| Парткод: | 99A0720 |
| Деталь: | Deflector, base |
| Парткод: | 99A0678 |
| Деталь: | Sensor, pass thru |
| Парткод: | 99A0288 |
| Деталь: | Label, tray option number |
| Парткод: | 99A1812 |
| Деталь: | Label, options |
| Парткод: | 99A1666 |
| Деталь: | Parts packet, washer (bracket 250-sheet frame retention mounting) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, screw (bracket 250-sheet frame retention mounting) |
| Парткод: | 99A0263 |
| Деталь: | Bracket, 250-sheet frame retention |
| Парткод: | 99A0679 |
| Деталь: | Alignment assembly paper feed |
| Парткод: | 56P1327 |
| Деталь: | Parts packet, screw (clip ref ground mounting) |
| Парткод: | 99A0263 |
| Деталь: | Clip, reference ground |
| Парткод: | 99A2066 |
| Деталь: | Parts packet |
| Парткод: | 56P1346 |
| Деталь: | Parts packet, screw (alignment asm mounting) |
| Парткод: | 99A0263 |
| Деталь: | CABLE, LASER |
| Парткод: | 56P1386 |
| Деталь: | Parts packet, screw (printhead mounting) |
| Парткод: | 99A0263 |
| Деталь: | Printhead assembly (includes all cables), 200/210 |
| Парткод: | 56P1443 |
| Деталь: | Cable, HSYNC |
| Парткод: | 56P1387 |
| Деталь: | CABLE, LASER |
| Парткод: | 56P1386 |
| Деталь: | Cable, HSYNC |
| Парткод: | 56P1387 |
| Деталь: | Cable, system board to fuser board |
| Парткод: | 56P1390 |
| Деталь: | EXIT SENSOR |
| Парткод: | 56P1403 |
| Деталь: | Narrow media sensor |
| Парткод: | 56P1402 |
| Деталь: | Cable, AC fuser lamp to LVPS |
| Парткод: | 56P1405 |
| Деталь: | Parts packet, screw (option board) |
| Парткод: | 99A0263 |
| Деталь: | Board, option tray |
| Парткод: | 56P0557 |
| Деталь: | Jumper, pin |
| Парткод: | 99A0627 |
| Деталь: | Parts packet, screw (switch spring) |
| Парткод: | 99A0263 |
| Деталь: | Spring, switch activate |
| Парткод: | 99A0063 |
| Деталь: | Stud assembly, 250-sheet frame |
| Парткод: | 99A0445 |
| Деталь: | Arm, paper out 250-sheet |
| Парткод: | 99A0448 |
| Деталь: | Parts packet, screw (auto comp mounting) |
| Парткод: | 99A0263 |
| Деталь: | Pick arm assembly |
| Парткод: | 99A1054 |
| Деталь: | Wear plate, pass thru |
| Парткод: | 99A0277 |
| Деталь: | Parts packet, screw (wear plate mounting) |
| Парткод: | 99A0263 |
| Деталь: | 500 Drive roll assembly |
| Парткод: | 99A0276 |
| Деталь: | Roll, skewed backup |
| Парткод: | 99A0451 |
| Деталь: | Cable, 250-sheet autoconnect |
| Парткод: | 99A0282 |
| Деталь: | RETAINER, ROLLER |
| Парткод: | 99A0450 |
| Деталь: | Sensor, paper low |
| Парткод: | 99A0350 |
| Деталь: | Bracket, 250-sheet frame retention |
| Парткод: | 99A0679 |
| Деталь: | Parts packet, washer |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0263 |
| Деталь: | Pick roll assembly |
| Парткод: | 99A0070 |
| Деталь: | Base, 250-sheet option |
| Парткод: | 99A1638 |
| Деталь: | Tray bias arm assembly |
| Парткод: | 99A0026 |
| Деталь: | Spring, tray bias |
| Парткод: | 99A0419 |
| Деталь: | Pad, machine mounting |
| Парткод: | 99A0058 |
| Деталь: | Sensor, option pass thru |
| Парткод: | 99A0288 |
| Деталь: | Label, tray options |
| Парткод: | 99A1666 |
| Деталь: | Shaft, 250-sheet drive |
| Парткод: | 99A0272 |
| Деталь: | Spring, power takeoff |
| Парткод: | 99A0275 |
| Деталь: | Bushing, drive shaft low |
| Парткод: | 99A0280 |
| Деталь: | Gear, feed roll |
| Парткод: | 99A0274 |
| Деталь: | Gear, bevel |
| Парткод: | 99A0273 |
| Деталь: | Bearing, drive shaft |
| Парткод: | 99A0279 |
| Деталь: | Cable, 250-sheet autoconnect |
| Парткод: | 99A0281 |
| Деталь: | Cover, fuser wick assembly |
| Парткод: | 56P1300 |
| Деталь: | Cover assembly, redrive cap |
| Парткод: | 99A2074 |
| Деталь: | Cover assembly, laser assembly, 500-sheet output |
| Парткод: | 56P1302 |
| Деталь: | Support, paper |
| Парткод: | 99A1587 |
| Деталь: | Hinge, upper front cover |
| Парткод: | 56P1305 |
| Деталь: | Cover, right side 500-sheet output, 200/210 |
| Парткод: | 56P1307 |
| Деталь: | Label, TLI/ID/serial number - blank |
| Парткод: | 99A0007 |
| Деталь: | Upper front cover with Toshiba Logo e-STUDIO 400P |
| Парткод: | 12G9259 |
| Деталь: | Latch, upper cover |
| Парткод: | 56P1308 |
| Деталь: | Cover assembly, lower front |
| Парткод: | 56P1309 |
| Деталь: | Spring, latch |
| Парткод: | 99A0004 |
| Деталь: | Cover, clear bezel, 200/210 |
| Парткод: | 56P1358 |
| Деталь: | Kit, operator panel overlay - English, Brazilian Portuguese, French, and Spanish |
| Парткод: | 56P1753 |
| Деталь: | Kit, operator panel overlay - Dutch, French, German, and Italian |
| Парткод: | 56P1754 |
| Деталь: | Kit, operator panel overlay - Czech and Hungarian |
| Парткод: | 56P1755 |
| Деталь: | Kit, operator panel overlay - Danish, Finnish, Norwegian, and Swedish |
| Парткод: | 56P1756 |
| Деталь: | Kit, operator panel overlay - Polish, Russian, and Turkish |
| Парткод: | 56P1757 |
| Деталь: | Kit, operator panel overlay - WW English and Spanish |
| Парткод: | 56P1758 |
| Деталь: | Kit, operator panel overlay - WW English, Simplified Chinese, Traditional Chinese, and Japanese |
| Парткод: | 56P1759 |
| Деталь: | Operator panel assembly 110V |
| Парткод: | 56P1310 |
| Деталь: | Operator panel assembly 220V |
| Парткод: | 56P1311 |
| Деталь: | Cartridge load spring |
| Парткод: | 99A1524 |
| Деталь: | Switch, cover closed w/cable assembly |
| Парткод: | 56P1394 |
| Деталь: | Cover, left door, 500 2-slot, 200/210 |
| Парткод: | 56P1312 |
| Деталь: | Parts packet, cable ties (10 each) |
| Парткод: | 99A0577 |
| Деталь: | Retainer, cable |
| Парткод: | 99A1594 |
| Деталь: | Parts packet, screw (left side cover mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (right side cover mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (laser cover) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (upper front cover mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (INA cover mounting) |
| Парткод: | 99A0263 |
| Деталь: | Cover, INA flat (blank) |
| Парткод: | 56P1341 |
| Деталь: | Parts packet, screw (outer shield mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (inner shield mounting) |
| Парткод: | 99A0263 |
| Деталь: | Shield, outer 2 slot, 200/210 |
| Парткод: | 56P1344 |
| Деталь: | Shield, inner assembly, 2 slot, 200/210 |
| Парткод: | 56P1342 |
| Деталь: | Shield, Ethernet (blank) |
| Парткод: | 99A1611 |
| Деталь: | Parts packet, screws |
| Парткод: | 99A0263 |
| Деталь: | System card assembly, stapler option |
| Парткод: | 56P1747 |
| Деталь: | Switch assembly, top cover open |
| Парткод: | 99A2531 |
| Деталь: | FLANGE, PULLEY |
| Парткод: | 99A2539 |
| Деталь: | Spring, upper diverter |
| Парткод: | 99A0104 |
| Деталь: | Bearing, redrive |
| Парткод: | 99A2540 |
| Деталь: | Shaft assembly, upper exit |
| Парткод: | 99A2517 |
| Деталь: | DEFLECTOR, UPPER |
| Парткод: | 99A2516 |
| Деталь: | PULLEY, DRIVE |
| Парткод: | 99A0363 |
| Деталь: | Shaft assembly, lower |
| Парткод: | 99A0368 |
| Деталь: | Shaft assembly, 40T middle stacker |
| Парткод: | 99A0913 |
| Деталь: | Shaft assembly, upper drive |
| Парткод: | 99A2515 |
| Деталь: | Shaft assembly, lower exit |
| Парткод: | 99A2518 |
| Деталь: | Belt, FHT 86T |
| Парткод: | 99A2538 |
| Деталь: | Cover, optical sensor |
| Парткод: | 99A2543 |
| Деталь: | Guide, inner bias |
| Парткод: | 99A2529 |
| Деталь: | Frame assembly, left |
| Парткод: | 99A2527 |
| Деталь: | Bar, upper output tray |
| Парткод: | 99A2533 |
| Деталь: | Spring, output tray |
| Парткод: | 99A2523 |
| Деталь: | Bumper, output tray |
| Парткод: | 99A2548 |
| Деталь: | Card assembly, left stapler bin level |
| Парткод: | 99A2549 |
| Деталь: | Gear, drive |
| Парткод: | 99A1717 |
| Деталь: | Motor assembly, drive |
| Парткод: | 99A2513 |
| Деталь: | Clutch assembly, stapler option |
| Парткод: | 99A2551 |
| Деталь: | Pulley, belt idler |
| Парткод: | 99A2547 |
| Деталь: | Bushing, tensioner CBM |
| Парткод: | 99A2552 |
| Деталь: | Gearbox, w/motor, 200/210 |
| Парткод: | 56P1332 |
| Деталь: | Shaft, power takeoff 500, 200/210 |
| Парткод: | 99A1569 |
| Деталь: | Spring, power takeoff shaft |
| Парткод: | 99A0275 |
| Деталь: | Gear, bevel with grease packet |
| Парткод: | 99A2080 |
| Деталь: | Developer drive assembly |
| Парткод: | 99A1544 |
| Деталь: | Parts packet, developer drive shaft, coupler gear 55 |
| Парткод: | 99A2081 |
| Деталь: | Parts packet, screw (developer drive ground) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (gearbox mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (motor mounting) |
| Парткод: | 99A0263 |
| Деталь: | CLIP, CABLE |
| Парткод: | 99A0260 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1371 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1374 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1365 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1367 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1366 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1364 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1342514 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339535 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339538 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1342536 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339537 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339539 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339540 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339541 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1342534 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339543 |
| Деталь: | Main PCB Assembly |
| Парткод: | 11A0330 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339545 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339546 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1342530 |
| Деталь: | Main PCB Assembly |
| Парткод: | 43H5546 |
| Деталь: | Main PCB Assembly |
| Парткод: | 1339549 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1375 |
| Деталь: | Main PCB Assembly |
| Парткод: | 99A0263 |
| Деталь: | Main PCB Assembly |
| Парткод: | 56P1385 |
| Деталь: | Guide, rear paper, use with 99A0219 |
| Парткод: | 99A0188 |
| Деталь: | Parts packet, screw (top frame mounting) |
| Парткод: | 99A0675 |
| Деталь: | Frame assembly, top with labels |
| Парткод: | 99A0219 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0675 |
| Деталь: | Parts packet, washer (top frame clamp) |
| Парткод: | 99A0677 |
| Деталь: | Clamp, top frame mounting |
| Парткод: | 99A0719 |
| Деталь: | Parts packet, nut (base mounting) |
| Парткод: | 99A0676 |
| Деталь: | Parts packet, washer (base mounting) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, screw (base mounting) |
| Парткод: | 99A0675 |
| Деталь: | PULLEY, IDLER |
| Парткод: | 99A0663 |
| Деталь: | BELT, DRIVE |
| Парткод: | 99A0664 |
| Деталь: | Cable, AC internal wiring |
| Парткод: | 99A1807 |
| Деталь: | Parts packet, nut (2-56 switch mounting) |
| Парткод: | 99A0676 |
| Деталь: | Switch, lower limit microswitch |
| Парткод: | 99A0653 |
| Деталь: | Parts packet, nut (power supply ground) |
| Парткод: | 99A0676 |
| Деталь: | Parts packet, washer (motor plate mtg) |
| Парткод: | 99A0677 |
| Деталь: | Cord, AC external jumper |
| Парткод: | 99A1808 |
| Деталь: | Parts packet, nut (power supply cover) |
| Парткод: | 99A0676 |
| Деталь: | COVER, POWER SUPPLY |
| Парткод: | 99A0714 |
| Деталь: | Parts packet, screw (power supply board mtg) |
| Парткод: | 99A0675 |
| Деталь: | Parts packet, washer (power supply board) |
| Парткод: | 99A0677 |
| Деталь: | POWER SUPPLY BOARD |
| Парткод: | 99A0667 |
| Деталь: | Cable, low voltage power supply |
| Парткод: | 99A0715 |
| Деталь: | BUSHING |
| Парткод: | 99A0685 |
| Деталь: | Parts packet, nut - 2-56 |
| Парткод: | 99A0676 |
| Деталь: | Switch, paper low |
| Парткод: | 99A0654 |
| Деталь: | Sensor assembly, paper out/upper limit |
| Парткод: | 99A0651 |
| Деталь: | Parts packet, screw (support 1 frame mtg) |
| Парткод: | 99A0675 |
| Деталь: | Frame, printer support 1 |
| Парткод: | 99A0659 |
| Деталь: | Parts kit, paper size switch assembly |
| Парткод: | 99A0695 |
| Деталь: | Parts packet, washer (sensor bracket mtg) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, screw (sensor bracket mtg) |
| Парткод: | 99A0675 |
| Деталь: | Stapler cartridge holder 321-C |
| Парткод: | 99A2575 |
| Деталь: | Stapler assembly |
| Парткод: | 99A2526 |
| Деталь: | Bracket, attach |
| Парткод: | 99A2556 |
| Деталь: | Parts packet, screws |
| Парткод: | 99A0263 |
| Деталь: | Belt, 185G |
| Парткод: | 99A1820 |
| Деталь: | Card assembly, right stapler bin level |
| Парткод: | 99A2544 |
| Деталь: | Arm assembly, belt idler |
| Парткод: | 99A0362 |
| Деталь: | Spring, swing arm |
| Парткод: | 99A2545 |
| Деталь: | Bumper, output tray |
| Парткод: | 99A2548 |
| Деталь: | Bar, upper output tray |
| Парткод: | 99A2533 |
| Деталь: | Spring, output tray |
| Парткод: | 99A2523 |
| Деталь: | Cover, optical sensor |
| Парткод: | 99A2543 |
| Деталь: | Frame assembly, right |
| Парткод: | 99A2528 |
| Деталь: | Clip, static ground |
| Парткод: | 99A2557 |
| Деталь: | Pick arm assembly (500-sheet) 200/210 |
| Парткод: | 56P1325 |
| Деталь: | Parts packet, bellcrank and spring for 500 tray, 200/210 |
| Парткод: | 56P1331 |
| Деталь: | Pick roll assembly |
| Парткод: | 99A0070 |
| Деталь: | Flag, paper out 500-sheet tray, 200/210 |
| Парткод: | 56P1323 |
| Деталь: | Parts packet, screw (hanger) |
| Парткод: | 99A0263 |
| Деталь: | Card asm, paper wt/paper low/out sensor |
| Парткод: | 56P1406 |
| Деталь: | Int. card/autocomp card cable (paper low/out sensors) |
| Парткод: | 56P1382 |
| Деталь: | Paper alignment wheel |
| Парткод: | 99A2559 |
| Деталь: | Kit, maintenance StapleSmart wheels |
| Парткод: | 99A2480 |
| Деталь: | Sensor, stapler pass thru |
| Парткод: | 99A2525 |
| Деталь: | Cable assembly, right stapler bin level |
| Парткод: | 99A2530 |
| Деталь: | Ground cable, stapler tray bar |
| Парткод: | 99A2534 |
| Деталь: | Cable, stapler |
| Парткод: | 99A2524 |
| Деталь: | Cable, Ground |
| Парткод: | 99A2532 |
| Деталь: | Cable assembly, left stapler bin level |
| Парткод: | 99A2504 |
| Деталь: | Label, pinch point |
| Парткод: | 99A2546 |
| Деталь: | TIE, CABLE |
| Парткод: | 99A0548 |
| Деталь: | Cartridge fan |
| Парткод: | 56P1408 |
| Деталь: | Fan, main w/cable |
| Парткод: | 56P1360 |
| Деталь: | Sensor, standard bin level with cable |
| Парткод: | 56P1391 |
| Деталь: | Int. card/autocomp card cable (paper low/out sensors) |
| Парткод: | 56P1382 |
| Деталь: | Pick arm assembly (500-sheet) 200/210 |
| Парткод: | 56P1325 |
| Деталь: | Cable, autoconnect bottom |
| Парткод: | 56P1383 |
| Деталь: | Autoconnect top, 200/210 |
| Парткод: | 56P1401 |
| Деталь: | Cable, main drive motor |
| Парткод: | 56P1384 |
| Деталь: | System board assembly (network), e-STUDIO 400P Includes 56P1445 |
| Парткод: | 12G9260 |
| Деталь: | Interconnect board assembly 2 slot, 200/210 |
| Парткод: | 56P1339 |
| Деталь: | Card assembly, Bar code |
| Парткод: | 56P1420 |
| Деталь: | Card assembly, IPDS and SC5/TNE |
| Парткод: | 56P1740 |
| Деталь: | Card assembly, ImageQuick |
| Парткод: | 56P1422 |
| Деталь: | Card assembly, communications, network |
| Парткод: | 56P1445 |
| Деталь: | Card assembly, communications, non-network |
| Парткод: | 56P1444 |
| Деталь: | Screws, parallel connector mounting |
| Парткод: | 99A0426 |
| Деталь: | Spring, backup roller |
| Парткод: | 99A0286 |
| Деталь: | Bellcrank, roller release |
| Парткод: | 99A1664 |
| Деталь: | Gear, bevel |
| Парткод: | 99A0273 |
| Деталь: | Bearing, drive shaft |
| Парткод: | 99A0279 |
| Деталь: | Cable, 250-sheet autoconnect |
| Парткод: | 99A0281 |
| Деталь: | Stud assembly, 500 frame |
| Парткод: | 99A1702 |
| Деталь: | Arm, paper out 500 |
| Парткод: | 99A1645 |
| Деталь: | Washer, frame mounting |
| Парткод: | 99A0452 |
| Деталь: | Deflector, base 500 |
| Парткод: | 99A1665 |
| Деталь: | Bracket, 500-sheet tray retention |
| Парткод: | 99A1667 |
| Деталь: | Spring, bellcrank 500-sheet option tray |
| Парткод: | 99A1929 |
| Деталь: | Upper redrive deflector |
| Парткод: | 99A1857 |
| Деталь: | Upper diverter spring |
| Парткод: | 99A0104 |
| Деталь: | Redrive assembly, 500 in/500 out, 200/210 |
| Парткод: | 56P1328 |
| Деталь: | Duct, main cap |
| Парткод: | 56P1318 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0263 |
| Деталь: | Support, right stacker plate, 200/210 |
| Парткод: | 56P1319 |
| Деталь: | Transfer plate assembly |
| Парткод: | 99A2020 |
| Деталь: | Pad, machine mounting |
| Парткод: | 99A2077 |
| Деталь: | Smart cartridge contact assembly |
| Парткод: | 99A2087 |
| Деталь: | Cartridge fan |
| Парткод: | 56P1408 |
| Деталь: | Toner sensor assembly |
| Парткод: | 56P1361 |
| Деталь: | Parts packet, contact kit |
| Парткод: | 99A0585 |
| Деталь: | Spring, tray bias |
| Парткод: | 99A0028 |
| Деталь: | Spring, cartridge hold down |
| Парткод: | 99A2019 |
| Деталь: | Tray bias arm assembly |
| Парткод: | 99A0026 |
| Деталь: | Roller, developer support |
| Парткод: | 99A0039 |
| Деталь: | Deflector, upper PF |
| Парткод: | 99A1525 |
| Деталь: | Deflector, inner, 200/210 |
| Парткод: | 56P1336 |
| Деталь: | Sensor, input |
| Парткод: | 99A0053 |
| Деталь: | Shield, gear 60/MPF |
| Парткод: | 99A1546 |
| Деталь: | Shield, ESD assembly with label |
| Парткод: | 99A0549 |
| Деталь: | Guard, gear |
| Парткод: | 99A1896 |
| Деталь: | Pan, motor drip |
| Парткод: | 99A2078 |
| Деталь: | Board, input tray (ITC) |
| Парткод: | 56P1139 |
| Деталь: | Pan, drip ITC |
| Парткод: | 99A2076 |
| Деталь: | Paper switch activate |
| Парткод: | 99A0063 |
| Деталь: | LINK, GEAR RELEASE |
| Парткод: | 99A0567 |
| Деталь: | Spring, counterbalance |
| Парткод: | 99A0556 |
| Деталь: | Shroud, fan, 200/210 |
| Парткод: | 56P1315 |
| Деталь: | Sensor, standard bin level with cable |
| Парткод: | 56P1391 |
| Деталь: | Bracket, level sensor |
| Парткод: | 99A0062 |
| Деталь: | Fan, main w/cable |
| Парткод: | 56P1360 |
| Деталь: | Support, left lower stacker |
| Парткод: | 99A2018 |
| Деталь: | Contact, LSF ground |
| Парткод: | 99A1596 |
| Деталь: | Duct, left stacker, 500-sheet |
| Парткод: | 99A2016 |
| Деталь: | Door assembly, redrive 250 sheet |
| Парткод: | 99A1644 |
| Деталь: | Flag, output paper level, 200/210 |
| Парткод: | 56P1316 |
| Деталь: | Guide, extension |
| Парткод: | 99A2017 |
| Деталь: | Spring, duplex ground |
| Парткод: | 99A1541 |
| Деталь: | Screw, socket set M4X5 mm |
| Парткод: | 99A0075 |
| Деталь: | Arm assembly, MPF |
| Парткод: | 99A0071 |
| Деталь: | Pick roll assembly |
| Парткод: | 99A0076 |
| Деталь: | Flag, MPT paper out |
| Парткод: | 99A0084 |
| Деталь: | MPF pad/separator arm assembly |
| Парткод: | 56P1352 |
| Деталь: | MPF lower deflector |
| Парткод: | 99A1531 |
| Деталь: | Parts packet, screw (lower deflector mounting 8 mm) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (lower deflector mounting 12 mm) |
| Парткод: | 99A0263 |
| Деталь: | Sensor, MPF paper out |
| Парткод: | 99A2071 |
| Деталь: | Spring assembly, separator |
| Парткод: | 99A0081 |
| Деталь: | Parts packet, screw (frame mounting) |
| Парткод: | 99A0263 |
| Деталь: | Screw, damper |
| Парткод: | 99A0073 |
| Деталь: | Bushing, pick roll shaft |
| Парткод: | 99A0074 |
| Деталь: | MPF frame assembly |
| Парткод: | 99A2027 |
| Деталь: | Parts packet, clip (pick roll shaft) |
| Парткод: | 99A0267 |
| Деталь: | Parts kit, charge roll link asm, left side |
| Парткод: | 99A0512 |
| Деталь: | Roll assembly, charge |
| Парткод: | 99A1017 |
| Деталь: | Bushing, charge roll |
| Парткод: | 99A1555 |
| Деталь: | Parts kit, charge roll link asm, right side |
| Парткод: | 99A0513 |
| Деталь: | Transfer roll assembly |
| Парткод: | 56P1357 |
| Деталь: | Arm, transfer roll assembly right |
| Парткод: | 99A0349 |
| Деталь: | Spring, transfer roll right |
| Парткод: | 99A0184 |
| Деталь: | Shaft, transfer pivot |
| Парткод: | 99A0185 |
| Деталь: | Spring, transfer roll left |
| Парткод: | 99A0181 |
| Деталь: | Arm, transfer roll left |
| Парткод: | 99A1578 |
| Деталь: | Parts packet, screw (charge roll) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, retainer (pivot shaft) |
| Парткод: | 99A0267 |
| Деталь: | Parts packet, retainer (aligner assembly) |
| Парткод: | 99A0267 |
| Деталь: | Gear, feed roll |
| Парткод: | 99A0274 |
| Деталь: | Bellcrank, roller release |
| Парткод: | 99A0278 |
| Деталь: | Card assembly, 2000 tray option |
| Парткод: | 56P0556 |
| Деталь: | Parts packet, screw (tray option card mtg) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, screw (door to door frame mounting) |
| Парткод: | 99A0675 |
| Деталь: | Parts packet, nut support frame 1 hex, support frame 2, hex |
| Парткод: | 99A0676 |
| Деталь: | Parts packet, washer (support frame 1 star, support frame 2 star) |
| Парткод: | 99A0677 |
| Деталь: | Cable, HCIT-14 pin flex |
| Парткод: | 99A0684 |
| Деталь: | Spring, backup roller |
| Парткод: | 99A0286 |
| Деталь: | Frame, EP module, 200/210 |
| Парткод: | 56P1347 |
| Деталь: | Right side frame assembly |
| Парткод: | 56P1320 |
| Деталь: | Nut plate, frame extension, 200/210 |
| Парткод: | 99A1540 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0263 |
| Деталь: | Contact, RSF ground |
| Парткод: | 99A1538 |
| Деталь: | Frame extension, left, 200/210 |
| Парткод: | 99A1517 |
| Деталь: | Left side frame |
| Парткод: | 56P1321 |
| Деталь: | Fuser assembly w/115V lamp |
| Парткод: | 56P1333 |
| Деталь: | Fuser assembly w/100V lamp |
| Парткод: | 56P1338 |
| Деталь: | Fuser assembly w/220V lamp |
| Парткод: | 56P1335 |
| Деталь: | Cover, fuser wiper cavity |
| Парткод: | 99A1658 |
| Деталь: | Wiper assembly, wet |
| Парткод: | 56P1415 |
| Деталь: | Kit, fuser cover assembly with thermistor, thermal fuse, and L & R fuser lamp contact assemblies, w/ fuser cover control card |
| Парткод: | 56P1348 |
| Деталь: | Parts packet |
| Парткод: | 99A0263 |
| Деталь: | Lamp, 115V |
| Парткод: | 56P1362 |
| Деталь: | Lamp, 220V |
| Парткод: | 56P1363 |
| Деталь: | Sensor, exit |
| Парткод: | 56P1403 |
| Деталь: | Sensor, narrow media |
| Парткод: | 56P1402 |
| Деталь: | Cover, top assembly |
| Парткод: | 99A2505 |
| Деталь: | Clip, brush ground |
| Парткод: | 99A2510 |
| Деталь: | Top cover bail/plate, right side |
| Парткод: | 99A2506 |
| Деталь: | Door, rear access |
| Парткод: | 99A2512 |
| Деталь: | Latch, rear access door |
| Парткод: | 99A1785 |
| Деталь: | Cover, right base assembly |
| Парткод: | 99A2501 |
| Деталь: | Cover, stapler access |
| Парткод: | 99A2503 |
| Деталь: | Switch, stapler access door assembly |
| Парткод: | 99A2502 |
| Деталь: | Cover, accumulator assembly |
| Парткод: | 99A2519 |
| Деталь: | Tray, output assembly |
| Парткод: | 99A2520 |
| Деталь: | Tray, output |
| Парткод: | 99A2542 |
| Деталь: | Label, tray options |
| Парткод: | 99A1666 |
| Деталь: | Sensor, stapler bin empty |
| Парткод: | 99A2521 |
| Деталь: | Sensor cover, stapler bin empty |
| Парткод: | 99A2541 |
| Деталь: | Bail, center stapler |
| Парткод: | 99A2511 |
| Деталь: | Kit, stacking bail |
| Парткод: | 99A2508 |
| Деталь: | Cover, left base assembly |
| Парткод: | 99A2500 |
| Деталь: | Top cover bail/plate, left side |
| Парткод: | 99A2507 |
| Деталь: | Tray assembly, jam removal 250 duplex |
| Парткод: | 56P1414 |
| Деталь: | Tray assembly, jam removal 500 duplex |
| Парткод: | 56P1416 |
| Деталь: | Sensor, paper low |
| Парткод: | 99A0350 |
| Деталь: | Parts packet, screw (auto comp mounting) |
| Парткод: | 99A0263 |
| Деталь: | Pick arm assembly |
| Парткод: | 99A0405 |
| Деталь: | Pick roll assembly |
| Парткод: | 99A0070 |
| Деталь: | Base, 500-sheet tray |
| Парткод: | 99A1636 |
| Деталь: | Pad, base 500-sheet |
| Парткод: | 99A0058 |
| Деталь: | Spring, tray bias |
| Парткод: | 99A0419 |
| Деталь: | Tray bias arm assembly |
| Парткод: | 99A0026 |
| Деталь: | Sensor, option pass thru |
| Парткод: | 99A0288 |
| Деталь: | Restraint, side 500-sheet tray |
| Парткод: | 99A0895 |
| Деталь: | Wear strips |
| Парткод: | 99A0292 |
| Деталь: | Label, tray option number |
| Парткод: | 99A1829 |
| Деталь: | Plate, 500-sheet tray wear |
| Парткод: | 99A1583 |
| Деталь: | Finger, autosize |
| Парткод: | 99A0126 |
| Деталь: | Plate, snap-in |
| Парткод: | 99A0124 |
| Деталь: | LABEL, PAPER SIZE |
| Парткод: | 99A1952 |
| Деталь: | Slider, autosize 500-sheet |
| Парткод: | 99A1582 |
| Деталь: | Restraint pad |
| Парткод: | 99A0120 |
| Деталь: | Tray assembly, 500-sheet |
| Парткод: | 99A1576 |
| Деталь: | Knob, Paper Size |
| Парткод: | 99A1537 |
| Деталь: | Restraint, back 500-sheet tray |
| Парткод: | 99A1602 |
| Деталь: | Latch, back restraint |
| Парткод: | 99A1601 |
| Деталь: | Label, options |
| Парткод: | 99A1666 |
| Деталь: | Board, option tray |
| Парткод: | 56P0557 |
| Деталь: | Shaft, 500-sheet drive |
| Парткод: | 99A0447 |
| Деталь: | Cable, 250 autoconnect |
| Парткод: | 99A0282 |
| Деталь: | Wear plate, pass thru |
| Парткод: | 99A1750 |
| Деталь: | 500 Drive roll assembly |
| Парткод: | 99A0276 |
| Деталь: | Parts packet, screw (wear plate mounting) |
| Парткод: | 99A0263 |
| Деталь: | RETAINER, ROLLER |
| Парткод: | 99A0450 |
| Деталь: | Roller, skewed backup |
| Парткод: | 99A0451 |
| Деталь: | Bushing, drive roll |
| Парткод: | 99A0438 |
| Деталь: | Spring, power takeoff |
| Парткод: | 99A0275 |
| Деталь: | Parts packet, screw (board mounting) |
| Парткод: | 99A0263 |
| Деталь: | Parts packet, retainer (aligner assembly) |
| Парткод: | 99A0267 |
| Деталь: | Bearing, drive shaft low |
| Парткод: | 99A0280 |
| Деталь: | Aligner assembly, paper |
| Парткод: | 99A0446 |
| Деталь: | Gear, feed roll |
| Парткод: | 99A0274 |
| Деталь: | Spring, switch activate |
| Парткод: | 99A0063 |
| Деталь: | Frame, printer support frame 2 |
| Парткод: | 99A0660 |
| Деталь: | Parts packet, screw (printer support 2 frame mounting) |
| Парткод: | 99A0675 |
| Деталь: | Clamp, feed frame |
| Парткод: | 99A0698 |
| Деталь: | Parts packet, screw (feed frame clamp) |
| Парткод: | 99A0675 |
| Деталь: | Bearing, Nyliner leadscrew top |
| Парткод: | 99A0691 |
| Деталь: | Cover, left side |
| Парткод: | 99A0656 |
| Деталь: | Strip, wear |
| Парткод: | 99A0681 |
| Деталь: | Strip, wear dimple |
| Парткод: | 99A1818 |
| Деталь: | Parts packet, screw (deflector mt 8-18 x 7/8 inch) |
| Парткод: | 99A0675 |
| Деталь: | Label, tray option number |
| Парткод: | 99A1829 |
| Деталь: | Transfer leadscrew assembly |
| Парткод: | 99A0662 |
| Деталь: | Bearing, leadscrew bottom |
| Парткод: | 99A0716 |
| Деталь: | Parts packet, nut (6-32 hinge mounting) |
| Парткод: | 99A0676 |
| Деталь: | Parts packet, washer (hinge mounting flat) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, washer (hinge mounting star) |
| Парткод: | 99A0677 |
| Деталь: | HINGE, DOOR |
| Парткод: | 99A0657 |
| Деталь: | DOOR ASSEMBLY, FRONT |
| Парткод: | 99A0655 |
| Деталь: | Magnet, door |
| Парткод: | 99A0658 |
| Деталь: | Frame assembly |
| Парткод: | 99A0650 |
| Деталь: | Tray assembly, elevator |
| Парткод: | 99A0661 |
| Деталь: | Card assembly, 2000 option control |
| Парткод: | 99A1806 |
| Деталь: | Parts packet, washer (card asm. mounting) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, screw (card asm. mounting) |
| Парткод: | 99A0675 |
| Деталь: | Kit, door switch spring and bumper |
| Парткод: | 99A0392 |
| Деталь: | Parts packet, washer (door switch spring mounting) |
| Парткод: | 99A0677 |
| Деталь: | Parts packet, nut (door switch spring mounting) |
| Парткод: | 99A0676 |
| Деталь: | Cable, optical sensor |
| Парткод: | 99A0690 |
| Деталь: | Bail, support |
| Парткод: | 99A0231 |
| Деталь: | Arm assembly, pivot |
| Парткод: | 99A1646 |
| Деталь: | Mounting, frame assembly |
| Парткод: | 99A1819 |
| Деталь: | Parts packet, retainer |
| Парткод: | 99A0240 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0234 |
| Деталь: | GEAR, IDLER |
| Парткод: | 99A1705 |
| Деталь: | GEAR, IDLER |
| Парткод: | 99A1704 |
| Деталь: | Shaft, drive rear |
| Парткод: | 99A0197 |
| Деталь: | Tray assembly, backup roller |
| Парткод: | 99A0079 |
| Деталь: | Parts packet, pulley |
| Парткод: | 99A0208 |
| Деталь: | Spring, backup roller |
| Парткод: | 99A0087 |
| Деталь: | ROLLER, BACKUP |
| Парткод: | 99A0086 |
| Деталь: | Tray assembly, drive roller |
| Парткод: | 99A1706 |
| Деталь: | Frame assembly, right side |
| Парткод: | 99A0125 |
| Деталь: | COVER, RIGHT |
| Парткод: | 99A0232 |
| Деталь: | Belt, 185G |
| Парткод: | 99A1820 |
| Деталь: | Guide, Paper Exit |
| Парткод: | 99A0226 |
| Деталь: | Shaft assembly, drive roller |
| Парткод: | 99A0122 |
| Деталь: | Frame assembly, left side |
| Парткод: | 99A0137 |
| Деталь: | Cover, backup tray |
| Парткод: | 99A0088 |
| Деталь: | Tray, backup roller |
| Парткод: | 99A0085 |
| Деталь: | Bail, support |
| Парткод: | 99A0231 |
| Деталь: | Arm assembly, pivot |
| Парткод: | 99A1646 |
| Деталь: | Mounting, frame assembly |
| Парткод: | 99A1819 |
| Деталь: | Parts packet, retainer |
| Парткод: | 99A2409 |
| Деталь: | Parts packet, screw |
| Парткод: | 99A0234 |
| Деталь: | GEAR, IDLER |
| Парткод: | 99A1705 |
| Деталь: | GEAR, IDLER |
| Парткод: | 99A1704 |
| Деталь: | Shaft, drive rear |
| Парткод: | 99A0197 |
| Деталь: | Tray assembly, backup roller |
| Парткод: | 99A0079 |
| Деталь: | Parts packet, pulley |
| Парткод: | 99A0208 |
| Деталь: | Spring, backup roller |
| Парткод: | 99A0087 |
| Деталь: | ROLLER, BACKUP |
| Парткод: | 99A0086 |
| Деталь: | Tray assembly, drive roller |
| Парткод: | 99A1707 |
| Деталь: | Frame assembly, right side |
| Парткод: | 99A0907 |
| Деталь: | COVER, RIGHT |
| Парткод: | 99A0232 |
| Деталь: | Belt, 185G |
| Парткод: | 99A1820 |
| Деталь: | Shaft assembly, drive roller |
| Парткод: | 99A0122 |
| Деталь: | Frame assembly, left side |
| Парткод: | 99A0906 |
| Деталь: | Cover, backup tray |
| Парткод: | 99A0088 |
| Деталь: | Tray, backup roller |
| Парткод: | 99A0085 |
| Деталь: | Paper weight assembly |
| Парткод: | 99A0389 |
| Деталь: | Guide, edge |
| Парткод: | 99A1694 |
| Деталь: | COVER, TOP |
| Парткод: | 99A1696 |
| Деталь: | Sensor, envelope pass thru |
| Парткод: | 99A0485 |
| Деталь: | Clutch, restraint/gear |
| Парткод: | 99A0393 |
| Деталь: | Cover, right side |
| Парткод: | 99A1697 |
| Деталь: | Support, slide out |
| Парткод: | 99A0390 |
| Деталь: | ROLLER, SUPPORT |
| Парткод: | 99A0488 |
| Деталь: | Motor, stepper DC |
| Парткод: | 99A0382 |
| Деталь: | Label, options |
| Парткод: | 99A1666 |
| Деталь: | Switch, envelope out |
| Парткод: | 99A0388 |
| Деталь: | Board assembly, electronic control |
| Парткод: | 99A1700 |
| Деталь: | Parts packet, gear kit |
| Парткод: | 99A0271 |
| Деталь: | Cover, left side |
| Парткод: | 99A1698 |
| Деталь: | Parts packet, retainer (4 mm PP) |
| Парткод: | 99A0404 |
| Деталь: | Parts packet, retainer (clip 5 mm shaft) |
| Парткод: | 99A0404 |
| Деталь: | Parts packet, retainer (6 mm) |
| Парткод: | 99A0404 |
| Деталь: | Parts packet, retainer (7 mm shaft) |
| Парткод: | 99A0404 |
| Деталь: | Shaft, drive pressure roller |
| Парткод: | 99A0384 |
| Деталь: | Cable, auto connect front |
| Парткод: | 99A0385 |
| Деталь: | Spring, cam clutch |
| Парткод: | 99A0494 |
| Деталь: | Label, envelope orientation icon |
| Парткод: | 99A0427 |
| Деталь: | Deflector guide |
| Парткод: | 99A0469 |
| Деталь: | Guard, pass thru sensor |
| Парткод: | 99A1699 |
| Деталь: | Screw, top/motor/board |
| Парткод: | 99A0413 |
| Деталь: | Belt, gear drive |
| Парткод: | 99A0484 |
| Деталь: | Bracket, stack limiter |
| Парткод: | 99A0491 |
| Деталь: | Spring, restraint roll shaft |
| Парткод: | 99A0400 |
| Деталь: | Spring, latch return |
| Парткод: | 99A0489 |
| Деталь: | Flag, envelope out sensor |
| Парткод: | 99A0487 |
| Деталь: | Tray assembly, 250-sheet option |
| Парткод: | 99A1536 |
| Деталь: | Restraint, side 250-sheet tray |
| Парткод: | 99A0892 |
| Деталь: | Wear strips |
| Парткод: | 99A0119 |
| Деталь: | Label, tray option number |
| Парткод: | 99A1829 |
| Деталь: | Clip, 250-sheet tray wear |
| Парткод: | 99A0121 |
| Деталь: | Finger, autosize |
| Парткод: | 99A0126 |
| Деталь: | Slider, autosize 250-sheet |
| Парткод: | 99A0127 |
| Деталь: | Plate, snap-in |
| Парткод: | 99A0124 |
| Деталь: | LABEL, PAPER SIZE |
| Парткод: | 99A1952 |
| Деталь: | Knob, Paper Size |
| Парткод: | 99A1537 |
| Деталь: | Restraint pad |
| Парткод: | 99A0120 |
| Деталь: | Restraint, back 250-sheet tray |
| Парткод: | 99A0893 |
| Деталь: | Latch, back restraint |
| Парткод: | 99A1601 |
| Деталь: | Spring, backup roller |
| Парткод: | 99A0286 |
| Деталь: | Spring, bellcrank 250-sheet tray option |
| Парткод: | 99A1928 |
| Деталь: | Bushing, drive roll |
| Парткод: | 99A0438 |
| Деталь: | Bellcrank, roller release |
| Парткод: | 99A0278 |
| Деталь: | Parts packet, screw w/washer (motor mt) |
| Парткод: | 99A1793 |
| Деталь: | Parts packet, nut and washer (drive pulley plate) |
| Парткод: | 99A1794 |
| Деталь: | Motor assembly, DC |
| Парткод: | 99A1795 |
| Деталь: | Parts packet, foot (stabilizer) |
| Парткод: | 99A0672 |
| Деталь: | Parts packet, mounting feet |
| Парткод: | 99A0687 |
| Деталь: | Belt, DC motor drive |
| Парткод: | 99A1796 |
| Деталь: | Idler pulley, belt tension |
| Парткод: | 99A1797 |
| Деталь: | Plate, drive pulley |
| Парткод: | 99A1798 |
| Деталь: | AC receptacle, lower AC |
| Парткод: | 99A1799 |
| Деталь: | PULLEY, DRIVE |
| Парткод: | 99A1800 |
| Деталь: | Retainer, C-clip |
| Парткод: | 99A1801 |
| Деталь: | AC receptacle, upper AC |
| Парткод: | 99A1802 |
| Деталь: | Cover, top LVPS |
| Парткод: | 99A1803 |
| Деталь: | Nut w/lock washer, top LVPS cover mounting |
| Парткод: | 99A1804 |
| Деталь: | Grommet, top LVPS cover |
| Парткод: | 99A1805 |
| Деталь: | Cable, 250-sheet autoconnect |
| Парткод: | 99A0281 |
| Деталь: | Bearing, drive shaft |
| Парткод: | 99A0279 |
| Деталь: | Gear, bevel |
| Парткод: | 99A0273 |
| Деталь: | 500 Drive roll assembly |
| Парткод: | 99A0276 |
| Деталь: | Parts packet, screw (frame mounting) |
| Парткод: | 99A0263 |
| Деталь: | Roll, skewed backup |
| Парткод: | 99A0451 |
| Деталь: | Parts packet, retainer (roller) |
| Парткод: | 99A0267 |
| Деталь: | Parts packet, screw (wear plate mounting) |
| Парткод: | 99A0675 |
| Деталь: | Wear plate wear, pass thru |
| Парткод: | 99A0277 |
| Деталь: | Stud assembly, 250-sheet frame |
| Парткод: | 99A0445 |
| Деталь: | Bearing, drive shaft low |
| Парткод: | 99A0280 |
| Деталь: | Spring, power takeoff |
| Парткод: | 99A0275 |
| Деталь: | Shaft, 250-sheet drive |
| Парткод: | 99A0272 |
| Деталь: | Aligner assembly, paper |
| Парткод: | 99A0446 |
| Деталь: | Tray assembly 500-sheet |
| Парткод: | 99A1576 |
| Деталь: | Restraint, side |
| Парткод: | 99A1895 |
| Деталь: | Strip, wear |
| Парткод: | 99A0292 |
| Деталь: | Label, tray option number |
| Парткод: | 99A1812 |
| Деталь: | Plate, 500-sheet tray wear |
| Парткод: | 99A1583 |
| Деталь: | Finger, autosize |
| Парткод: | 99A0126 |
| Деталь: | Plate, snap-in |
| Парткод: | 99A0124 |
| Деталь: | Slider, autosize 500-sheet |
| Парткод: | 99A1582 |
| Деталь: | Restraint pad |
| Парткод: | 99A0120 |
| Деталь: | Restraint, back |
| Парткод: | 99A2093 |
| Деталь: | Latch, back restraint |
| Парткод: | 99A1601 |
Коды ошибок
900
901
902
903
904
905
906
910
911
912
913
914
917
920
921
922
923
924
925
927
929
930
931 ... 935
936 ... 937
939
940
948
949
950
951
953
954
955
956, 957, 959
958
960
961
962
964
975 ... 979
980
981
982
983
984
990
991
Описание
| Error code: | 900 |
| Description: | RIP Software |
| Remedy: | 1 Printer POR Turn the printer off and on several times. If Error Code 900 continues to display, go to step 2. 2 System board Turn the machine off and on several times, waiting a few minutes between power on and power off. If Error Code 900 continues to display, go to step 3. 3 Factory defaults Restore factory defaults. See “EP Defaults”. This resets the non-critical areas of the user NVRAM. If Error Code 900 continues to display, go to step 4. 4 Sub error codes With Error Code 900 displayed, press and 2. Record the complete list of Sub Error Codes on the display, then call your next level of support or call Toshba. |
| Error code: | 901 |
| Display: | Power OFF/ON 901:Error |
| Description: | Engine flash error |
| Causes: | Indicates that the flash which the system board code is programmed into is bad. Replace the system board. |
| Remedy: | Replace the system board. |
| Error code: | 902 |
| Display: | Power OFF/ON 902:Error |
| Description: | Engine software error |
| Causes: | These errors indicate an unrecoverable system software error. |
| Remedy: | Replace the system board. |
| Error code: | 903 |
| Display: | Power OFF/ON 903:Error |
| Description: | Paperport link driver error |
| Causes: | These errors indicate an unrecoverable system software error. |
| Remedy: | Replace the system board. |
| Error code: | 904 |
| Display: | Power OFF/ON 904:Error |
| Description: | Interface violation by RIP |
| Causes: | These errors indicate an unrecoverable system software error. |
| Remedy: | Replace the system board. |
| Error code: | 905 |
| Display: | Service call 905:Error |
| Description: | Interface violation by Paperport device |
| Causes: | These errors indicate an unrecoverable system software error. |
| Remedy: | Replace the system board. |
| Error code: | 906 |
| Display: | Service call 906:Error |
| Description: | RIP interface driver error |
| Causes: | These errors indicate an unrecoverable system software error. |
| Remedy: | Replace the system board. |
| Error code: | 910 |
| Display: | SYSTEM HALT (*) 910 : DEVICE CONST |
| Description: | Tray 2 Lift Motor Failure Code 910: The Tray 2 Lift Motor is not rotating. |
| Causes: | • Tray 2 Lift Motor, PL4.1.23 • Motor Driver Board, PL2.1.10 • LVPS, PL3.1.1 |
| Remedy: | 1 Test the Lift Motor. 1. Close the Interlock Switches for test. 2. Run the Service Diagnostics Tray 2 Lift Motor test. Does the motor operate? Complete. Replace the motor. If the error persists, go to Step 2. 2 Check for +24 V to the Lift Motor. Is there +24 V across GDDC-1 <=> ground? Go to Step 5. Go to Step 3. 3 Check Motor Driver Board POW24 connector for 24 V. 1. Disconnect POW24. Is there +24 V across POW24 pins 1 and 2? Replace the Motor Driver Board. Go to Step 4. 4 Check for 24 V at the LVPS 1. Disconnect CN2 on the LVPS. Is there +24 V across pins 1 and 2? Replace the POW24 Harness. Replace the LVPS. 5 Check all pins of the DRV1 harness for continuity. Disconnect the DRV1 ribbon cable. Is the cable conductive? Replace the Engine Control Board. Replace the DRV1 Harness. |
| Error code: | 911 |
| Display: | ERROR 911 ENVIRONMENT TEMP(HI) |
| Description: | DC pick motor excessive PWM |
| Remedy: | • Check system board • Check autocompensator motor |
| Error code: | 912 |
| Description: | DC pick motor underspeed error |
| Remedy: | • Check system board • Check autocompensator |
| Error code: | 913 |
| Description: | DC pick motor overspeed error |
| Remedy: | • Check system board • Check autocompensator |
| Error code: | 914 |
| Description: | DC pick motor no encoder feedback |
| Remedy: | Check autocompensator assembly |
| Error code: | 917 |
| Display: | Power Off/on 917: Error |
| Description: | Error in the Transfer Unit Belt Applicable Status Code: Code 917: The Transfer Belt Rotation Sensor indicates a belt error. |
| Causes: | • Transfer Unit, PL1.1.20 • Transfer Unit Motor, PL2.1.86 • Belt Rotation Sensor, PL2.1.146 |
| Remedy: | 1 Test the Belt Rotation Sensor. Run the Service Diagnostics Belt Hole IC test. Does the sensor function correctly? Go to Step 2. Replace the sensor (8-91). If the error persists, go to Step 3. 2 Test the Transfer Unit Motor. 1. Close the Interlock Switches for test. 2. Run the Service Diagnostics Transfer Belt Motor test. Does the motor operate? Replace the Transfer Unit. If the error persists, go to Step 3. Replace the motor. If the error persists, go to Step 3. 3 Check all pins on the HALL1 Harness for continuity. Disconnect HALL1 and P/J310 Is the harness conductive? Replace the Motor Driver Board.If the error persists, go to Step 4. Replace the HALL1 Harness. 4 Check all pins of the DRV0 harness for continuity. Disconnect the DRV0 ribbon cable. Is the cable conductive? Replace the Engine Control Board. Replace the DRV0 Harness. |
| Error code: | 920 |
| Display: | Power Off/on 920: Error |
| Description: | Fuser Error |
| Causes: | • Software defective • Turn the machine power off/on, or change the controller firmware • Insufficient memory |
| Remedy: | Indicates that the fuser is below temperature when printing. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 921 |
| Display: | Power Off/on 921: Error |
| Description: | Fuser Error |
| Causes: | • The font is not on the SD card |
| Remedy: | Indicates that the fuser is below standby temperature when the printer is idle. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 922 |
| Display: | Power Off/on 922: Error |
| Description: | Fuser Error |
| Causes: | • IMB defective • BiCU defective • Poor connection between BiCU and IMB |
| Remedy: | Fuser failed to reach standby temperature. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 923 |
| Display: | Power Off/on 923: Error |
| Description: | Fuser Error |
| Remedy: | Fuser is too hot during printing or when printer is idle. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 924 |
| Display: | Power Off/on 924: Error |
| Description: | Fuser Error |
| Causes: | • Non-supported DRAM connected • Poor connection between IMB and optional DRAM • Optional DRAM defective • IMB defective • BiCU defective |
| Remedy: | An open circuit has been detected in the Fuser Thermistor Circuit. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 925 |
| Display: | Power Off/on 925: Error |
| Description: | Fuser Error |
| Causes: | Defective HDD. Hard disk data inconsistencies due to power interruption during writing to the hard disk. Defective software. |
| Remedy: | Wrong fuser lamp installed. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 927 |
| Display: | Power Off/on 927: Error |
| Description: | Fan stalled |
| Causes: | 24 V of power is not supplied to tray 5 properly. |
| Remedy: | This is an indication that a printer fan has stalled. 1 Main fan Manually spin the fan and check that it rotates freely. Check the cable connection to the system board, J7 for correct installation. 2 Main fan to system board cable Check the continuity of the cable. If incorrect, replace the cable. 3 Error code 927 (fan runs) Check the voltage at J7-1 on the system board. The voltage measures +5 V dc (static) 0 V dc (fan running). If incorrect, replace the main fan. If this does not fix the problem, replace the system board. 4 Error code 927 (fan not running) Check the voltage at J7-3 on the system board. The voltages are: • +22 V dc to +24 V dc (printer and fan running) • +12 V dc to +15 V dc (printer not running—fan running about half speed). If incorrect, replace the system board. If this does not fix the problem, replace the main fan. |
| Error code: | 929 |
| Display: | Power Off/on 929: Error |
| Description: | Failure in the Waste Toner Motor The Waste Toner Motor has stopped rotating. Applicable Status Code: Code 929: The Waste Toner Motor has failed. |
| Causes: | • Waste Toner Motor, PL7.1.3 • Motor Driver Board, PL2.1.10 • Engine Control Boar d, PL1.1.4 |
| Remedy: | 1 Test the Waste Toner Motor. 1. Close the Interlock Switches for test. 2. Run the Service Diagnostics Waste Toner Motor test. Does the motor operate? Complete. Replace the motor. If the error persists, go to Step 2. 2 Check for +24 V to the Waste Toner Motor. Is the +24 V across WTDC- 3 <=> ground? Go to Step 5. Go to Step 3. 3 Check Motor Driver Board POW24 connector for 24 V. 1. Disconnect POW24. Is the +24 V across POW24 pins 1 and 2? Replace the Motor Driver Board. Go to Step 4. 4 Check for 24 V at the LVPS 1. Disconnect CN2 on the LVPS. Is the +24 V across pins 1 and 2? Replace the POW24 Harness. Replace the LVPS. 5 Check all pins of the DRV1 harness for continuity. Disconnect the DRV1 ribbon cable. Is the cable conductive? Replace the Engine Control Board. Replace the DRV1 Harness. |
| Error code: | 930 |
| Display: | Power Off/on 930: Error |
| Description: | Motor Driver Board Clock Frequency Error The Sub-CPU clock frequency on the Motor Driver Board is inaccurate. Applicable Status Code: Code 930: The Sub-CPU clock frequency is inaccurate. |
| Causes: | • Motor Driver Board, PL2.1.10 • Engine Control Board, PL1.1.4 |
| Remedy: | 1 Check the Motor Driver Board connection. Is DRV0 harness damaged or disconnected or? Replace the harness. Go to Step 2. 2 Check all pins of the DRV0 harness for continuity. Disconnect the DRV1 ribbon cable. Is the cable conductive? Replace the Motor Driver Board. If the error persists, replace the Engine Control Board. Replace the DRV1 Harness. |
| Error code: | 931 ... 935 |
| Description: | Printhead Error 932 - Printhead: Lost Hsync 933 - Mirror Motor Locks/Lost Hsync 934 - Mirror Motor Lost Lock 935 - Mirror Motor unable to reach operating speed. |
| Remedy: | These errors represent a problem with the printhead. 1 Error code 931 No first HYSNC Signal Error Code 932 Lost HYSNC These errors usually indicate a failure in the HYSNC signal to the printhead. Check the continuity of the cables connected to J5 and J4 on the system board. If incorrect, replace the defective cable. The voltage at J4-1 measures approximately +5 V dc. If incorrect, replace the system board. The voltage at J5-7 measures approximately +24 V dc. If incorrect, replace the system board. If correct, replace the printhead assembly. 2 Error Code 934 Mirror motor lost lock Error Code 935 Mirror motor unable to reach operating speed These error codes indicate a problem with the mirror motor circuit in the printhead assembly or the mirror motor cable to the system board cable or system board assembly. Check the continuity of the mirror motor cable connected to J5 on the system board. If incorrect, replace the cable. The voltage at J5-7 measures approximately +24 V dc. If incorrect, replace the system board. If correct, replace the FRUs in the following order: • System board • Printhead assembly |
| Error code: | 936 ... 937 |
| Description: | 936 - Main Drive Motor initial lock failure 937 - Main Drive Motor lost lock |
| Remedy: | Indicates a problem with the main drive motor. 1 Main drive assembly (excessive noise or vibration) Remove the controller board and run a Diagnostic Print Test in the continuous mode. Check the main drive assembly for any excessive noise or vibration. Determine if the noise is in the main drive, toner cartridge, fuser, or main drive gearbox. Look for any loose or worn parts in the developer drive assembly, main drive gearbox, or fuser. Repair as necessary. 2 Main drive motor assembly (excessive noise, gears ratcheting and so on) A service error code 936 - Transport Motor may be displayed. Check the voltage at J24-6 on the system board. It measures approximately +5 V dc when the motor is not running and goes to 0 V dc when the motor is running. If incorrect, replace the system board. If this does not fix the problem, replace the main drive motor. 3 Main drive motor cable Check the continuity of the main drive motor cable. If incorrect, replace the cable. 4 Motor does not turn, no gear error code 936 or user message 201 Paper Jam displays. Check the voltages at J24 on the system board. If the voltage is incorrect, replace the FRUs in the following order: • Main drive motor assembly • System board |
| Error code: | 939 |
| Description: | RIP -Engine Communications Error |
| Causes: | The engine board has not responded correctly to a command from the RIP board after several tries. Check the connection between the engine and RIP boards. If connection is good, replace the engine board. If problem persists, replace the RIP board. |
| Remedy: | The RIP processor and the engine processor cannot communicate with one another. Check the system board for correct installation and secure ground. If no problem is found, replace the FRUs in the following order: • System board • Interconnect board Note: The controller software also can cause a 939 error code. Contact your next level for software support. |
| Error code: | 940 |
| Display: | Power Off/on 940: Error |
| Description: | Waste Toner Transfer Error The Waste Toner Auger Rotation Sensor indicates that the Waste Toner Auger has stopped rotating. Applicable Status Code: Code 940: The Waste Toner Auger has failed. |
| Causes: | • Waste Toner Auger Rotation Sensor • Waste Toner Auger Assembly • Waste Toner Motor |
| Remedy: | 1 Check the following for evidence of fault or damage: • Waste Toner Manifold • Waste Toner Auger Rotation Sensor • HALLDCT Harness Is there any damage or debris? Replace any damaged parts. Go to Step 2. 2 Test the Waste Toner Auger Rotation Sensor. Run the Service Diagnostics Waste Toner Hole IC test using a magnetic source to actuate the Hall-effect sensor. Does the sensor function correctly? Go to Step 3. Replace the sensor. If the error persists, go to Step 6. 3 Check the Waste Toner Manifold Auger drive. With the Basket Assembly closed, rotate the Waste Toner Motor. Does the Auger rotate? Go to Step 4. Replace the Waste Toner Gear Assembly PL2.1.41. 4 Test the Waste Toner Motor. Run the Service Diagnostics Waste Motor test. Does the motor rotate? Go to Step 7. Replace the motor. If the error persists, go to Step 5. 5 Check all pins of the WTDC Harness for continuity. Disconnect WTDC and P/J50. Is the harness conductive? Replace the Motor Driver Board. Replace the harness. 6 Check all pins of the HALLDCT Harness for continuity. Disconnect HALLDCT and P/J320. Is the harness conductive? Replace the Motor Driver Board. Replace the harness. 7 Check all pins of the DRV0 Harness for continuity. Disconnect DRV0. Is the harness conductive? Replace the Motor Driver Board. If the error persists, replace the Engine Control Board. Replace the harness. |
| Error code: | 948 |
| Description: | PEL Clock Error |
| Remedy: | Indicates the pel clock check failed. Replace the system board. |
| Error code: | 949 |
| Description: | Delay Line Calibration Failure |
| Remedy: | Indicates a delay line calibration failure. Replace the system board. |
| Error code: | 950 |
| Description: | NVRAM Mismatch |
| Remedy: | 950 Error displayed on the printer and you are not sure if the printer had the interconnect or system boards previously replaced: 1 Interconnect board Note: Before replacing the interconnect board, make absolutely sure you have the correct FRU number for the interconnect board that should go into your printer. Warning: Any time the interconnect board assembly is replaced, the Configuration ID must be reset in NVRAM on the interconnect board. See “Setting configuration ID”. Unplug the machine and replace the interconnect board assembly. Turn the printer on. If a 950 error still displays, replace the system board assembly. 950 Error after replacing the system board: 1 System board Note: Make sure you have the correct system board FRU number before installing the board in the printer. Replace the system board. 950 Error after replacing interconnect board: 1 Interconnect board Note: Before replacing the interconnect board, make absolutely sure you have the correct FRU number for the interconnect board that should go into your printer. Warning: Any time the interconnect board assembly is replaced, the Configuration ID must be reset in NVRAM on the interconnect board. Go to“Setting configuration ID”. Replace the interconnect board. |
| Error code: | 951 |
| Description: | NVRAM Secure NVRAM Missing |
| Causes: | • Software defective • BICU defective |
| Remedy: | Replace the system board. |
| Error code: | 953 |
| Description: | NVRAM Chip Failure |
| Causes: | • Firmware bug • Update the scanner firmware • IPU defective |
| Remedy: | Indicates the NVRAM chip on the interconnect board has failed. Replace the interconnect board. |
| Error code: | 954 |
| Description: | NVRAM CRC Failure |
| Causes: | • Firmware bug • IPU defective |
| Remedy: | Indicates the NVRAM experienced a CRC failure. Replace the interconnect board. |
| Error code: | 955 |
| Description: | Code CRC <loc> |
| Causes: | • Firmware bug • Hard disk unit defective • Controller defective • MCU defective • IPU defective |
| Remedy: | Replace the system board. Where <loc> = CRC Failure or ECC Failure on the system board. |
| Error code: | 956, 957, 959 |
| Description: | System Board |
| Remedy: | Error codes 956 thru 959 are system board failures. Perform a power on reset (POR). If this does not fix the problem, replace the system board. • 956 = Processor failure • 957 = ASIC failure • 959 = SRAM failure |
| Error code: | 958 |
| Description: | NAND Failure |
| Causes: | The printer has performed more than 100 "shift and re-flash" operations as a result of Error Correction Code bit corrections. It is an indication that the NAND on the RIP board is failing. Replace the RIP board. |
| Remedy: | Before proceeding when a 958 NAND failure displays, perform a power on reset (POR) to see if the ECC error correction code can reflash NAND. If this does not fix the problem, replace the system board. |
| Error code: | 960 |
| Display: | Inspection is required. 980:Error |
| Description: | RAM Memory Error |
| Remedy: | Indicates a DRAM Memory Error on the system board. Replace the system board. |
| Error code: | 961 |
| Description: | RAM in Slot 2 is Bad |
| Causes: | The RAM in slot 1 on the RIP board is bad. Replace the failing RAM card. |
| Remedy: | If another SDRAM memory DIMM is installed in slot 1, turn the power off, switch the DIMM in slot 1 to slot 2. If the memory in slot 2 now works correctly, replace the failing DIMM that was in slot 2. If this does not fix the problem, replace the system board. If another DIMM is not available, replace the memory option. If this does not fix the problem, replace the system board. |
| Error code: | 962 |
| Description: | RAM in Slot 1 is Bad |
| Causes: | The RAM in slot 2 on the RIP board is bad. Replace the failing RAM card. |
| Remedy: | If another SDRAM memory DIMM is installed in slot 2, turn the power off, switch the DIMM in slot 2 to slot 1. If the memory in slot 1 now works correctly, replace the failing DIMM that was in slot 1. If this does not fix the problem, replace the system board. If another DIMM is not available, replace the memory option. If this does not fix the problem, replace the system board. |
| Error code: | 964 |
| Description: | Emulation Error |
| Causes: | • Software defective |
| Remedy: | Indicates a failure within the Download Emulation which is programmed into the code overlay card. The specific error is as follows: 964 - Download Emulation CRC Failure. Checksum Failure. |
| Error code: | 975 ... 979 |
| Description: | Network Card x |
| Remedy: | The following errors indicate a failure with the network card in the specified slot. (x=any card installed in slots 1 or 2.) • 975 - Unrecognizable Network Card x. Replace network card x. • 976 - Unrecoverable software error in network card x. • 978 - Bad checksum while programming network card x. Replace network card x. • 979 - Flash parts failed while programming network card x. If the printer is a network model, replace the system board. |
| Error code: | 980 |
| Display: | Contact the Service center. 980: Error |
| Description: | <device> Comm |
| Causes: | • See description below this table. |
| Remedy: | The engine is experiencing unreliable communications to the specified device. |
| Error code: | 981 |
| Display: | Service call 981: Error |
| Description: | <device> |
| Causes: | • Defective NVRAM • Loose connection between the BICU and the NVRAM • Incorrect installation of the NVRAM • Defective BICU |
| Remedy: | The engine protocol violation detected by the specified device. |
| Error code: | 982 |
| Display: | Service call 982: Error |
| Description: | <device> Comm |
| Causes: | • Localization setting not specified (The main power switch is turned on for the first time after the NVRAM is replaced.) • Incorrect localization setting • Defective NVRAM |
| Remedy: | Communications error detected by the specified device. |
| Error code: | 983 |
| Display: | Power Off/on 983: Error |
| Description: | <device> |
| Causes: | Is more than one toner cartridge of the same color installed? |
| Remedy: | Invalid command received by the specified device. |
| Error code: | 984 |
| Display: | Service call 984: Error. |
| Description: | <device> |
| Causes: | • Controller (SIMAC) board defective • BICU defective • BICU/controller disconnected |
| Remedy: | Invalid command parameter received by the specified device. Note: Service errors 980 thru 984 <device> can be one of the following: system board, duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
| Error code: | 990 |
| Display: | Inspection is required. 990 : Error |
| Description: | <device> |
| Causes: | • Firmware defective: re-boot • Update firmware |
| Remedy: | Indicates an equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. Note: <device> can be one of the following: duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
| Error code: | 991 |
| Description: | <device> Card |
| Causes: | Software defective, re-boot |
| Remedy: | The specified device has detected an equipment check in its system card. Note: <device> can be one of the following: duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
