Samsung CLX-6220FX
Рейтинг
Снят с производства
Тип устройства
МФУ
Макс. формат
A4
Число страниц в месяц
65000
Скорость печати
A4
20
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип |
лазерный/светодиодный |
Число страниц в месяц |
65 000 |
Факс |
|
Сканер |
|
Копир |
|
Тип устройства |
МФУ |
Цветность печати |
цветная |
Макс. формат |
A4 |
Телефон |
|
Размещение |
настольный |
Печать фотографий |
|
Область применения |
средний офис |
Принтер |
|
Пигментные чернила |
|
Печать без полей |
|
Система непрерывной подачи чернил |
|
Прямая печать |
|
Двусторонняя печать |
|
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 20 |
Макс, разрешение для цветной печати |
|
| По X | 9 600 |
Время выхода первого отпечатка |
|
| Ч/б | 24 |
| Цветн, | 24 |
Копир |
|
Время выхода первой копии |
27 |
Макс, количество копий за цикл |
99 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По Y | 300 |
| По X | 300 |
| По X | 1 200 |
| По Y | 600 |
Сканер |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Емкость устройства автоподачи оригиналов |
50 |
Тип сканера |
планшетный/протяжный |
Разрешение сканера |
|
| По Х (улучшенное) | 4 800 |
| По Y (улучшенное) | 4 800 |
| По Х | 600 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
2 500 |
Ресурс цветного картриджа/тонера |
2 000 |
Количество картриджей |
4 |
Печать на: |
|
| CD/DVD |
|
| Фотобумаге |
|
| Рулоне |
|
| Глянцевой бумаге |
|
| Конвертах |
|
| Карточках |
|
| Пленках |
|
| Этикетках |
|
| Матовой бумаге |
|
Факс |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
PC Fax |
|
Цветной |
|
Телефон |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
Языки управления |
|
| PCL 5e |
|
| PostScript 2 |
|
| PPDS |
|
|
|
|
| PostScript 3 |
|
| PCL 5c |
|
| PCL 6 |
|
| PostScript |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 350 |
Вывод бумаги |
|
| Стандартный | 170 |
Финишер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Электронная сортировка |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Bluetooth |
|
Wi-Fi 802.11n |
|
Инфракрасный порт |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
LPT |
|
AirPrint |
|
USB |
|
Ethernet (RJ-45) |
|
Память/Процессор |
|
Макс, объем памяти |
512 |
Объем памяти |
256 |
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| DOS |
|
| Linux |
|
| Windows |
|
| Mac OS |
|
Уровень шума |
|
| В режиме ожидания | 32 |
| При работе | 54 |
Габариты |
|
Глубина |
498 |
Высота |
651 |
Ширина |
468 |
Вес |
36 |
Модули
PLATEN
Fuser
ELA UNIT-REVERSE
PLATEN-UPPER
COVER-MP
ADF 1
COVER-MIDDLE ASSY
CASSETTE ASSEMBLY
ELA UNIT-MOTOR BRKT
DADF-COVER OPEN
Frame Bottom
CASSETTE
DRIVE FEED
COVER-MIDDLE REAR ASSY
COVER-FRONT ASSY
DADF-UPPER
DADF STACKER-TX
FRAME
COVER
MAIN
PLATEN-LOWER
DADF
DRIVE FUSER-BRACKET
SCANNER
DADF-LOWER
ELA UNIT-FRAME REV
Frame Left
Frame Right
OPE
DADF-COVER PLATEN
MEA UNIT-COVER TOP
Детали MAIN
| Деталь: | PLATEN |
| Парткод: | JC97-03761A |
| Деталь: | PLATEN-LOWER |
| Парткод: | JC97-03758A |
| Деталь: | PLATEN-UPPER |
| Парткод: | JC97-03757A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | Fuser |
| Парткод: | JC91-00970A |
| Деталь: | Fuser |
| Парткод: | JC91-00971A |
| Цена: | 13 700 ₽ |
| Деталь: | Fuser |
| Парткод: | JC91-00968A |
| Деталь: | Fuser |
| Парткод: | JC91-00969A |
| Деталь: | FRAME-LOWER FUSER |
| Парткод: | JC61-02724A |
| Деталь: | LEVER-JAM |
| Парткод: | JC66-02023A |
| Деталь: | LEVER-RELEASE |
| Парткод: | JC66-02024A |
| Деталь: | GROUND-PR_SUB |
| Парткод: | JC63-02504A |
| Деталь: | PLATE-GROUND SUB |
| Парткод: | JC61-02738A |
| Деталь: | PLATE-GROUND FUSER PR |
| Парткод: | JC61-02727A |
| Деталь: | HOLDER-RELEASE |
| Парткод: | JC61-03507A |
| Деталь: | ACTUATOR-FUSER |
| Парткод: | JC66-01404A |
| Деталь: | Spring ETC-Actuator |
| Парткод: | JC61-70903A |
| Деталь: | GUIDE-ACTUATOR |
| Парткод: | JC61-02731A |
| Деталь: | BRACKET-FUSER MAIN |
| Парткод: | JC61-02718A |
| Деталь: | BRACKET-BUSH |
| Парткод: | JC61-03494A |
| Деталь: | GUIDE-PLATE |
| Парткод: | JC61-02732A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001835 |
| Деталь: | BRACKET-SUPPORT |
| Парткод: | JC61-02723A |
| Деталь: | Roller-Pressure |
| Парткод: | JC66-02433A |
| Цена: | 3 500 ₽ |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-001341 |
| Деталь: | GEAR-PR |
| Парткод: | JC66-02022A |
| Деталь: | DRUM-FUSER_BELT |
| Парткод: | JC66-02037A |
| Деталь: | BRACKET-NIP SUB |
| Парткод: | JC61-02722A |
| Деталь: | HOLDER-INNER |
| Парткод: | JC61-02735A |
| Деталь: | BRACKET-GAP |
| Парткод: | JC61-02662A |
| Деталь: | BRACKET-NIP |
| Парткод: | JC61-02721A |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001284 |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001285 |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001272 |
| Деталь: | LAMP-HALOGEN |
| Парткод: | 4713-001273 |
| Деталь: | BRACKET-INNER BELT PI30 |
| Парткод: | JC61-02720A |
| Деталь: | BUSH-BELT |
| Парткод: | JC61-02737A |
| Деталь: | HOLDER-LAMP |
| Парткод: | JC61-02739A |
| Деталь: | GUIDE-INPUT_P |
| Парткод: | JC61-03705A |
| Деталь: | BRACKET-BELT |
| Парткод: | JC61-02713A |
| Деталь: | BRACKET-THERMISTOR |
| Парткод: | JC61-02769A |
| Деталь: | HOLDER-HARNESS |
| Парткод: | JC61-02734A |
| Деталь: | THERMOSTAT |
| Парткод: | 4712-001050 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000282 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000267 |
| Деталь: | FRAME-UPPER FUSER |
| Парткод: | JC61-02725A |
| Деталь: | COVER-THERMOSTAT |
| Парткод: | JC63-02572A |
| Деталь: | GROUND-LOWER |
| Парткод: | JC63-02503A |
| Деталь: | HOLDER-CONNECTOR |
| Парткод: | JC61-01929A |
| Деталь: | HOLDER-THERMISTOR |
| Парткод: | JC61-02657A |
| Деталь: | GROUND-UPPER |
| Парткод: | JC63-01309A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | HANDLE-FUSER_LC |
| Парткод: | JC64-00525A |
| Деталь: | LOCKER-FUSER_L |
| Парткод: | JC64-00310A |
| Деталь: | SPRING ETC-DEVE REAR |
| Парткод: | JC61-00550A |
| Деталь: | HANDLE-FUSER_RC |
| Парткод: | JC64-00524A |
| Деталь: | LOCKER-FUSER_R |
| Парткод: | JC64-00309A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | COVER-GEAR FUSER |
| Парткод: | JC63-02445A |
| Деталь: | GEAR-IDLE PR |
| Парткод: | JC66-02025A |
| Деталь: | GEAR-IDLE SUB |
| Парткод: | JC66-02026A |
| Деталь: | BRACKET-DRIVE FUSER |
| Парткод: | JC61-02717A |
| Деталь: | GUIDE-OUTPUT FUSER |
| Парткод: | JC61-02728A |
| Деталь: | ROLLER-EXIT IDLE |
| Парткод: | JC66-00608A |
| Деталь: | GROUND-EXIT |
| Парткод: | JC63-01310A |
| Деталь: | Spring Etc-Exit Roll FD |
| Парткод: | JC61-70911A |
| Деталь: | HOLDER-EXIT(MC) |
| Парткод: | JC61-00547A |
| Деталь: | ROLLER FD R |
| Парткод: | JC66-01233A |
| Деталь: | PMO-Roller FD F |
| Парткод: | JC72-41007A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-02558A |
| Деталь: | BUSH-6_D(L) |
| Парткод: | JC61-00884A |
| Деталь: | BUSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | GEAR-_M_EXIT |
| Парткод: | JC66-00782A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | GUIDE-DUPLEX |
| Парткод: | JC61-01935A |
| Деталь: | LABEL-CAUTION |
| Парткод: | JC68-01581A |
| Деталь: | HOLDER_RIB |
| Парткод: | JC61-03752A |
| Деталь: | WASHER-PLAN |
| Парткод: | 6031-000023 |
| Деталь: | THERMISTOR-NTC ASSY |
| Парткод: | 1404-001538 |
| Деталь: | THERMISTOR-NTC ASSY |
| Парткод: | 1404-001486 |
| Деталь: | HARNESS-FUSER DRAW_F |
| Парткод: | JC39-00668A |
| Деталь: | LABEL(R)-PPID(DEVE) |
| Парткод: | JC68-01381A |
| Деталь: | ELA UNIT-REVERSE |
| Парткод: | JC96-04800A |
| Деталь: | MEA UNIT-COVER TOP |
| Парткод: | JC97-03056A |
| Деталь: | ELA UNIT-FRAME REV |
| Парткод: | JC96-04822A |
| Деталь: | MEA-GEAR REVERSE |
| Парткод: | JC97-03146A |
| Деталь: | ELA UNIT-MOTOR BRKT |
| Парткод: | JC96-04814A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | PLATEN-UPPER |
| Парткод: | JC97-03757A |
| Деталь: | COVER-SCAN UPPER |
| Парткод: | JC63-01506C |
| Деталь: | PLATEN-DUMMY UPPER |
| Парткод: | JC97-03765A |
| Деталь: | GLASS-SCAN |
| Парткод: | JC01-00001A |
| Деталь: | LEVER-LINK LOCKER |
| Парткод: | JC66-02546A |
| Деталь: | BRACKET-LOCKER |
| Парткод: | JC61-01987A |
| Деталь: | IPR-HOLDER GLASS |
| Парткод: | JB70-00148A |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000440 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-01991B |
| Деталь: | TAPE-DOUBLE FACE |
| Парткод: | 0203-001267 |
| Деталь: | COVER-MP |
| Парткод: | JC95-01154A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000264 |
| Деталь: | GUIDE-SIDE MP R |
| Парткод: | JC61-01042D |
| Деталь: | GUIDE-SIDE MP L |
| Парткод: | JC61-01043D |
| Деталь: | COVER-MP_TRAY |
| Парткод: | JC63-01287B |
| Деталь: | TRAY-ASF INPUT |
| Парткод: | JC63-01293B |
| Деталь: | BADGE-COLOR MIDDLE |
| Парткод: | JC64-00428A |
| Деталь: | LINK-TRAY_MP_L |
| Парткод: | JC66-01349A |
| Деталь: | LINK-TRAY_MP_R |
| Парткод: | JC66-01350A |
| Деталь: | LABEL(R)-HEIGHT MP |
| Парткод: | JC68-01528A |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | Ролик подачи бумаги в автоподатчике документов, в сборе |
| Парткод: | JB75-00299A |
| Цена: | 330 ₽ |
| Деталь: | Ролик захвата бумаги в автоподатчике документов, в сборе |
| Парткод: | JB75-00300A |
| Цена: | 220 ₽ |
| Деталь: | Соленоид автоподатчика с двухсторонней печатью |
| Парткод: | JC33-00030A |
| Цена: | 650 ₽ |
| Деталь: | COVER-MIDDLE ASSY |
| Парткод: | JC95-01168A |
| Деталь: | Cover-Middle |
| Парткод: | JC63-01543C |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | LATCH-MIDDLE A |
| Парткод: | JC66-01616A |
| Деталь: | LATCH-MIDDLE B |
| Парткод: | JC66-01617A |
| Деталь: | HOLDER-LSU |
| Парткод: | JC61-01983A |
| Деталь: | SPRING ETC-LOCKER |
| Парткод: | JC61-02512A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001194 |
| Деталь: | BRACKET-MID LOCK |
| Парткод: | JC61-02210A |
| Деталь: | COVER-LOCKER FRONT |
| Парткод: | JC63-01567C |
| Деталь: | TRAY-ASF FOLDER |
| Парткод: | JC63-02056C |
| Деталь: | TRAY-ASF OUTPUT |
| Парткод: | JC63-01560D |
| Деталь: | ACTUATOR-SW_OPEN |
| Парткод: | JC66-01623A |
| Деталь: | Ring-E |
| Парткод: | 6044-000231 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001363 |
| Деталь: | PBA-USB HOST |
| Парткод: | JC92-01964A |
| Деталь: | HARNESS-SCANNER OPEN |
| Парткод: | JC39-00847A |
| Деталь: | SPEAKER |
| Парткод: | 3001-002207 |
| Деталь: | PBA-REVERSE |
| Парткод: | JC92-01953A |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-000132 |
| Деталь: | COVER-MIDDLE EXIT |
| Парткод: | JC63-01550A |
| Деталь: | COVER-MIDDLE OPEN |
| Парткод: | JC63-01547C |
| Деталь: | SUPPORT-MIDDLE |
| Парткод: | JC61-02410A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000152 |
| Деталь: | HARNESS-USB HOST |
| Парткод: | JC39-00839A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000282 |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-01760A |
| Деталь: | BRACKET-LOCKER |
| Парткод: | JC61-02213A |
| Деталь: | CBF HARNESS-LSU_GND |
| Парткод: | JC39-00496A |
| Деталь: | HARNESS-FAN EXTENSION |
| Парткод: | JC39-00893A |
| Деталь: | TRAY-ASF LEGAL |
| Парткод: | JC63-02049C |
| Деталь: | Датчик наличия бумаги |
| Парткод: | 0604-001415 |
| Цена: | 240 ₽ |
| Деталь: | Резиновый элемент на ролик захвата бумаги из кассеты |
| Парткод: | JC66-01168A |
| Деталь: | Ролик захвата бумаги из из кассеты |
| Парткод: | JC61-01601B |
| Цена: | 290 ₽ |
| Деталь: | ELA UNIT-MOTOR BRKT |
| Парткод: | JC96-04814A |
| Деталь: | MOTOR STEP |
| Парткод: | JC31-00106A |
| Деталь: | BRACKET-GEAR REV |
| Парткод: | JC61-02208A |
| Деталь: | GEAR-REV 39/19 |
| Парткод: | JC66-01611A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | GEAR-REV 31 |
| Парткод: | JC66-01609A |
| Деталь: | GEAR-REV 37 |
| Парткод: | JC66-01613A |
| Деталь: | GEAR-REV 26/39 |
| Парткод: | JC66-01630A |
| Деталь: | GEAR-REV 39/23 |
| Парткод: | JC66-01612A |
| Деталь: | GEAR-REV 23 |
| Парткод: | JC66-01610A |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000269 |
| Деталь: | DADF-COVER OPEN |
| Парткод: | JC97-03755A |
| Деталь: | MEA UNIT-PICK UP DADF |
| Парткод: | JC97-03070A |
| Цена: | 600 ₽ |
| Деталь: | PMO-BUSH |
| Парткод: | JB72-00819A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | MEA UNIT-STOPPER |
| Парткод: | JC97-03060A |
| Деталь: | Cover-Open |
| Парткод: | JC63-02171C |
| Деталь: | GUIDE-M_DOC SENSOR |
| Парткод: | JC61-00788A |
| Деталь: | SPRING ETC-PICKUP |
| Парткод: | JC61-02489A |
| Деталь: | DAMPER-DADF UPPER |
| Парткод: | JC66-01876A |
| Деталь: | FRAME-BOTTOM |
| Парткод: | JC93-00146A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000282 |
| Деталь: | Spring-TS |
| Парткод: | 6107-001165 |
| Цена: | 500 ₽ |
| Деталь: | FRAME-BOTTOM |
| Парткод: | JC61-01871A |
| Деталь: | GUIDE-PICKUP |
| Парткод: | JC61-01878A |
| Деталь: | FRAME-PICKUP_GUIDE |
| Парткод: | JC61-03333A |
| Деталь: | SEAL-FILM SCATTERING |
| Парткод: | JC62-00364A |
| Деталь: | ACTUATOR-REGI_DALI |
| Парткод: | JC66-02294A |
| Деталь: | BRUSH-ANTISTATIC |
| Парткод: | JC67-00295A |
| Деталь: | ELA Unit-Pick Up |
| Парткод: | JC96-04491A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Spring-TS |
| Парткод: | 6107-001170 |
| Деталь: | FRAME-PICK UP |
| Парткод: | JC61-01838A |
| Деталь: | CAM-M-PICKJJP |
| Парткод: | JC66-00377A |
| Цена: | 500 ₽ |
| Деталь: | LEVER-ACTUATOR EMPTY |
| Парткод: | JC66-01187A |
| Деталь: | Shaft-Pick Up |
| Парткод: | JC66-01336A |
| Деталь: | CAM-SHAFTjPICK UP |
| Парткод: | JC66-01402A |
| Деталь: | PMO-BUSHING_P/U,MP |
| Парткод: | JC72-41364A |
| Деталь: | ASF-PICK UP |
| Парткод: | JC90-00932A |
| Цена: | 250 ₽ |
| Деталь: | CASSETTE |
| Парткод: | JC90-00980A |
| Цена: | 5 000 ₽ |
| Деталь: | CASSETTE-REGISTRATION |
| Парткод: | JC90-00978A |
| Деталь: | MEA-KNOCK_UP_PLATE |
| Парткод: | JC97-02888A |
| Деталь: | CASSETTE-EXTENSION |
| Парткод: | JC90-00972A |
| Деталь: | MEA UNIT-GEAR_BASE |
| Парткод: | JC97-02889A |
| Деталь: | MEA-GEAR PICKUP_MP |
| Парткод: | JC97-02893A |
| Деталь: | CASSETTE-COVER ASSY |
| Парткод: | JC90-00976A |
| Деталь: | MEA-HOLDER PAD_MP |
| Парткод: | JC97-02892A |
| Цена: | 500 ₽ |
| Деталь: | MEA-KNOCK_UP PLATE_MP |
| Парткод: | JC97-02891A |
| Деталь: | ELA Unit-Roller P/Up MP |
| Парткод: | JC96-02686B |
| Деталь: | CASSETTE-GUIDE DUPLEX |
| Парткод: | JC90-00977A |
| Деталь: | MEA-HOLDER_PAD |
| Парткод: | JC97-03077A |
| Деталь: | PMO-Idle Pick Up MP |
| Парткод: | JC72-01003A |
| Деталь: | SHAFT-MP_PICK_UP |
| Парткод: | JC66-01348A |
| Деталь: | COVER-DRAW_CONNECTOR |
| Парткод: | JC63-01286B |
| Деталь: | HARNESS-MP DRAWER_MP |
| Парткод: | JC39-01333A |
| Деталь: | GROUND-REGI_BRKT |
| Парткод: | JC63-01282A |
| Деталь: | ACTUATOR-FEED_EMPTY |
| Парткод: | JC66-01403A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | GUIDE-PAPER_MPF |
| Парткод: | JC61-01865A |
| Деталь: | Roller-Feed |
| Парткод: | JC66-01347A |
| Деталь: | PMO-PLATE_LOCKER |
| Парткод: | JC72-00972A |
| Деталь: | Spring Etc-Locker,Plate |
| Парткод: | JG61-70531A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001166 |
| Цена: | 280 ₽ |
| Деталь: | ADJUST-M-CASSETTE_L |
| Парткод: | JC70-00300A |
| Деталь: | ADJUST-M-CASSETTE_R |
| Парткод: | JC70-00301A |
| Деталь: | PLATE-GND_KNOCKUP |
| Парткод: | JC61-01940A |
| Деталь: | SHEET-MPF |
| Парткод: | JC63-01291A |
| Деталь: | PLATE-GND-BRKT-GEAR |
| Парткод: | JC61-01923A |
| Деталь: | HOLDER-_M_GEAR REGI |
| Парткод: | JC61-01128A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001249 |
| Деталь: | GEAR-M-REGI |
| Парткод: | JC66-00774A |
| Деталь: | HOLDER-_M_CLUTCH GEAR |
| Парткод: | JC61-01127A |
| Деталь: | COVER-GEAR_BOX |
| Парткод: | JC63-01285A |
| Деталь: | SOLENOID-PICKJJP |
| Парткод: | JC33-00022A |
| Цена: | 600 ₽ |
| Деталь: | LEVER-LINKJNDICATOR |
| Парткод: | JC66-01355C |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | ROLLER-IDLE FEED |
| Парткод: | JC66-00764A |
| Деталь: | SPRING ETC-ROLLER |
| Парткод: | JC61-01274A |
| Деталь: | PMO-Bearing Shaft |
| Парткод: | JC72-41191B |
| Цена: | 430 ₽ |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001543 |
| Деталь: | SEAL-WASTE SIDE |
| Парткод: | JC62-00326A |
| Деталь: | SPRING ETC-KNOCK UP MP |
| Парткод: | JC61-70913A |
| Деталь: | SHEET-CASSETTE |
| Парткод: | JC63-01756A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02020A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000264 |
| Деталь: | FRAME-CASSETTE |
| Парткод: | JC61-01856A |
| Деталь: | HOLDER-ACTUATOR |
| Парткод: | JC61-03704A |
| Деталь: | SPRING ETC-LEVER SENSOR |
| Парткод: | JB61-00107A |
| Деталь: | ACTUATOR-CHECK PAPER |
| Парткод: | JC66-02556A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | GREASE-GRAPHITE |
| Парткод: | 0205-001067 |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001144 |
| Деталь: | DRIVE-FEED |
| Парткод: | JC93-00153A |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | GREASE |
| Парткод: | 0205-001232 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | MOTOR STEP |
| Парткод: | JC31-00112A |
| Цена: | 1 700 ₽ |
| Деталь: | BRACKET-FEED MOTOR |
| Парткод: | JC61-02776B |
| Деталь: | BRACKET-FEED GEAR |
| Парткод: | JC61-03520A |
| Деталь: | GEAR-DRV MAIN PICK-UP |
| Парткод: | JC66-01363A |
| Деталь: | GEAR-RDCN FEED A |
| Парткод: | JC66-02040A |
| Деталь: | GEAR-RDCN FEED C |
| Парткод: | JC66-02042A |
| Деталь: | GEAR-IDLE FEED A |
| Парткод: | JC66-02043A |
| Деталь: | GEAR-IDLE FEED B |
| Парткод: | JC66-02044A |
| Деталь: | GEAR-RCDN FEED B |
| Парткод: | JC66-02436A |
| Деталь: | GEAR-RCDN FEED D |
| Парткод: | JC66-02437A |
| Деталь: | PMO-IMPELLER_DRV |
| Парткод: | JC72-00825A |
| Деталь: | COVER-MIDDLE REAR ASSY |
| Парткод: | JC95-01169A |
| Деталь: | COVER-MIDDLE REAR |
| Парткод: | JC63-01549D |
| Деталь: | COVER-WLAN |
| Парткод: | JC63-01667B |
| Деталь: | PMO-Roller Upper DP |
| Парткод: | JC72-40981A |
| Деталь: | ACTUATOR-REAR OUT |
| Парткод: | JC66-01924A |
| Деталь: | GUIDE-ACTUATOR |
| Парткод: | JC61-02547A |
| Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
| Парткод: | JB61-00076A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | HARNESS-REVERSE JAM |
| Парткод: | JC39-00942A |
| Деталь: | COVER-FRONT ASSY |
| Парткод: | JC95-01167A |
| Деталь: | Cover-Front |
| Парткод: | JC63-01521C |
| Деталь: | SUPPORT-PTB R |
| Парткод: | JC61-01849B |
| Деталь: | HOLDER-LINK FRONT |
| Парткод: | JC61-01846B |
| Деталь: | KNOB-HANDLE |
| Парткод: | JC64-00299D |
| Деталь: | Spring ETC-Guide Deve |
| Парткод: | JC61-00038A |
| Деталь: | LEVER-PTB |
| Парткод: | JC66-01354A |
| Деталь: | LOCKER-FRONT R |
| Парткод: | JC64-00306A |
| Деталь: | LOCKER-FRONT L |
| Парткод: | JC64-00305A |
| Деталь: | BRACKET-P-COVER LOCK |
| Парткод: | JC61-01050A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001138 |
| Деталь: | HOLDER-KNOB HANDLE |
| Парткод: | JC61-01841A |
| Деталь: | HOLDER-LOCKER FRONT R |
| Парткод: | JC61-01843A |
| Деталь: | HOLDER-LOCKER FRONT L |
| Парткод: | JC61-01842A |
| Деталь: | COVER-FRONT PATH |
| Парткод: | JC63-01290B |
| Деталь: | LEVER-PTB TOP |
| Парткод: | JC66-01421A |
| Деталь: | LEVER-COUPLING R |
| Парткод: | JC66-01353A |
| Деталь: | LEVER-COUPLING L |
| Парткод: | JC66-01352A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001345 |
| Деталь: | LABEL-INSTALL |
| Парткод: | JC68-01905A |
| Деталь: | SUPPORT-PTB L |
| Парткод: | JC61-01848B |
| Деталь: | LINK-SUPPORT |
| Парткод: | JC66-01358A |
| Деталь: | SHAFT-HINGE LINK |
| Парткод: | JC66-00835A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | COVER-MP |
| Парткод: | JC95-01154A |
| Деталь: | ROLLER-M_IDLE SCF |
| Парткод: | JC66-01022A |
| Цена: | 260 ₽ |
| Деталь: | Shaft-DUP_Roller |
| Парткод: | JC66-01846A |
| Цена: | 1 200 ₽ |
| Деталь: | Spring-CS |
| Парткод: | 6107-001218 |
| Деталь: | DADF-UPPER |
| Парткод: | JC97-03749A |
| Деталь: | MEA UNIT-DADF RUBBER |
| Парткод: | JC97-03069A |
| Цена: | 100 ₽ |
| Деталь: | SPRING ETC-PAD |
| Парткод: | JC61-00387A |
| Деталь: | ROLLER-M-ADF IDLE |
| Парткод: | JC66-00461A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | COVER-DADF_UPPER TOP |
| Парткод: | JC63-01610D |
| Деталь: | SHEET-PATH |
| Парткод: | JC63-01776A |
| Деталь: | SPRING ETC-EXIT IDLE |
| Парткод: | JC61-02428A |
| Деталь: | ROLLER-IDLE SCF |
| Парткод: | JC66-01022B |
| Деталь: | Shaft-Feed Idle |
| Парткод: | JC66-01817A |
| Деталь: | HOLDER-LIFTING_IDLE |
| Парткод: | JC61-02252A |
| Деталь: | DAMPER-DADF UPPER |
| Парткод: | JC66-01876A |
| Деталь: | MEC-Brush Antistatic |
| Парткод: | JC75-00095A |
| Деталь: | COVER-DADF_UPPER BT |
| Парткод: | JC63-01622D |
| Деталь: | GROUND-BRUSH |
| Парткод: | JC63-01664A |
| Деталь: | GROUND-DADF UPPER |
| Парткод: | JC63-01663A |
| Деталь: | HARNESS-DADF SENSOR 2 |
| Парткод: | JC39-00854A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | ACTUATOR-EMPTY |
| Парткод: | JC66-01765A |
| Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
| Парткод: | JB61-00076A |
| Деталь: | CBF HARNESS-SCAN GND |
| Парткод: | JC39-00322A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02079A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02078A |
| Деталь: | DADF STACKER-TX |
| Парткод: | JC97-03756A |
| Деталь: | COVER-STACKER_TX |
| Парткод: | JC63-02169C |
| Деталь: | GUIDE-DOCU L |
| Парткод: | JC61-02845C |
| Деталь: | GUIDE-DOCU R |
| Парткод: | JC61-02846C |
| Деталь: | IPR-WASHER SPRING CU |
| Парткод: | JF70-10616A |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | COVER-RACK |
| Парткод: | JC63-02177C |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000282 |
| Деталь: | GUIDE-STACKER WIRE |
| Парткод: | JC61-02513A |
| Деталь: | FRAME |
| Парткод: | JC93-00147A |
| Деталь: | FRAME |
| Парткод: | JC93-00147B |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | SCREW-MACHINE |
| Парткод: | 6006-001193 |
| Деталь: | SENSOR-HUMIDITY |
| Парткод: | JC32-00005A |
| Деталь: | SOLENOID-PICKJJP |
| Парткод: | JC33-00022A |
| Цена: | 600 ₽ |
| Деталь: | HARNESS-BLDC_CLU_FAN |
| Парткод: | JC39-00938A |
| Деталь: | HARNESS-OPC BLDC |
| Парткод: | JC39-01026A |
| Деталь: | HARNESS-DEVE BLDC PICKUP SOL |
| Парткод: | JC39-01028A |
| Деталь: | HARNESS-FEEDSTEPjMOTOR |
| Парткод: | JC39-01249A |
| Деталь: | HARNESS-EXITjSTEPMOTOR |
| Парткод: | JC39-01337A |
| Деталь: | HARNESS-HVPS_24V |
| Парткод: | JC39-01340A |
| Деталь: | BJSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | BRACKET-LOCKERjPTBjL |
| Парткод: | JC61-01855A |
| Деталь: | BRACKET-LOCKERjPTBjR |
| Парткод: | JC61-01869A |
| Деталь: | SPRING ETC-LOCKjPTBjR |
| Парткод: | JC61-01879A |
| Деталь: | GJIDE-HARNESSjCABLE |
| Парткод: | JC61-01890A |
| Деталь: | SPRING ETC-LOCKjPTBjL |
| Парткод: | JC61-01899A |
| Деталь: | FRAME-LSJ |
| Парткод: | JC61-01927A |
| Деталь: | LOCKER-PTBjR |
| Парткод: | JC64-00303A |
| Деталь: | LOCKER-PTBjL |
| Парткод: | JC64-00304A |
| Деталь: | LEVER-FUSER FRAME |
| Парткод: | JC66-01300A |
| Деталь: | CAP-MAIN PICK-UP GEAR |
| Парткод: | JC67-00215A |
| Деталь: | BAR-PJCROSS BOTTOM |
| Парткод: | JC71-00042A |
| Деталь: | SPONGE-SEALINGjLSU |
| Парткод: | JC72-01539A |
| Деталь: | SPONGE-BARjCROSS |
| Парткод: | JC72-01553A |
| Деталь: | DRIVE EXIT-BRACKET |
| Парткод: | JC93-00126A |
| Деталь: | FRAME-TOP |
| Парткод: | JC93-00145A |
| Деталь: | FRAME-TOP |
| Парткод: | JC93-00145B |
| Деталь: | FRAME-BOTTOM |
| Парткод: | JC93-00146A |
| Деталь: | FRAME-LEFT |
| Парткод: | JC93-00150A |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC93-00151A |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC93-00151B |
| Деталь: | DRIVE FUSER-BRACKET |
| Парткод: | JC93-00152A |
| Деталь: | DRIVE-FEED |
| Парткод: | JC93-00153A |
| Деталь: | ELA UNIT-OPEjLEFT |
| Парткод: | JC96-04481A |
| Деталь: | ELA UNIT-DUCTjFUSER |
| Парткод: | JC96-04487A |
| Деталь: | ELA UNIT-DEVEjCRUM |
| Парткод: | JC96-05420A |
| Деталь: | MEA UNIT-COVERjOPEN |
| Парткод: | JC97-02883A |
| Деталь: | MEA-GEAR PICK UP |
| Парткод: | JC97-02895A |
| Деталь: | COVER |
| Парткод: | JC95-01170A |
| Деталь: | COVER-FRONT ASSY |
| Парткод: | JC95-01167A |
| Деталь: | COVER-RIGHT ASSY |
| Парткод: | JC95-01188A |
| Деталь: | COVER-MIDDLE ASSY |
| Парткод: | JC95-01168A |
| Деталь: | COVER-LEFT |
| Парткод: | JC63-01519C |
| Деталь: | MEA-BRACKET REAR |
| Парткод: | JC97-03052A |
| Деталь: | COVER-MIDDLE REAR ASSY |
| Парткод: | JC95-01169A |
| Деталь: | COVER-REVERSE |
| Парткод: | JC95-01187A |
| Деталь: | HVPS |
| Парткод: | JC44-00183A |
| Цена: | 8 000 ₽ |
| Деталь: | FDB-1LAMP-ZC-V2 |
| Парткод: | JC44-00184A |
| Деталь: | FDB-SINGLE TRIAC V1 |
| Парткод: | JC44-00186A |
| Деталь: | FDB-MULTI TRIAC V1 |
| Парткод: | JC44-00185A |
| Деталь: | FDB-MULTI TRIAC V2 |
| Парткод: | JC44-00187A |
| Деталь: | SMPS-V2C |
| Парткод: | JC44-00100B |
| Деталь: | SMPS-V1 |
| Парткод: | JC44-00093B |
| Деталь: | CASSETTE |
| Парткод: | JC90-00980A |
| Цена: | 5 000 ₽ |
| Деталь: | Fuser |
| Парткод: | JC91-00970A |
| Деталь: | Fuser |
| Парткод: | JC91-00971A |
| Цена: | 13 700 ₽ |
| Деталь: | Fuser |
| Парткод: | JC91-00968A |
| Деталь: | Fuser |
| Парткод: | JC91-00969A |
| Деталь: | PBA-Main |
| Парткод: | JC92-02240A |
| Деталь: | PBA-Main |
| Парткод: | JC92-02238A |
| Деталь: | FRAME |
| Парткод: | JC93-00147B |
| Деталь: | FRAME |
| Парткод: | JC93-00147A |
| Деталь: | COVER |
| Парткод: | JC95-01170A |
| Деталь: | CARTRIDGE-TRANSFER |
| Парткод: | CLT-T508 |
| Деталь: | CARTRIDGE-TONER Y |
| Парткод: | CLT-Y508S |
| Деталь: | CARTRIDGE-TONER M |
| Парткод: | CLT-M508S |
| Деталь: | CARTRIDGE-TONER C |
| Парткод: | CLT-C508S |
| Деталь: | CARTRIDGE-TONER K |
| Парткод: | CLT-K508S |
| Деталь: | LSU |
| Парткод: | JC97-03733A |
| Цена: | 8 600 ₽ |
| Деталь: | FAN |
| Парткод: | JC31-00072A |
| Деталь: | FAN-DC |
| Парткод: | JC31-00088A |
| Деталь: | FLAT CABLE |
| Парткод: | JC39-00650A |
| Деталь: | FLAT CABLE |
| Парткод: | JC39-00651A |
| Деталь: | BRACKET-HINGE_L |
| Парткод: | JC61-01896A |
| Деталь: | BRACKET-HINGE_R |
| Парткод: | JC61-01897A |
| Деталь: | Frame-Duct |
| Парткод: | JC61-01910A |
| Деталь: | FRAME-DAMPER_R |
| Парткод: | JC61-01911A |
| Деталь: | FRAME-DAMPER_L |
| Парткод: | JC61-01912A |
| Деталь: | SUPPORT-PCB |
| Парткод: | JC61-02543A |
| Деталь: | HOLDER-LOCK FUSER |
| Парткод: | JC61-03706A |
| Деталь: | LINK-HINGE |
| Парткод: | JC66-01422A |
| Деталь: | DAMPER-HINGE |
| Парткод: | JC66-01425A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-01760A |
| Деталь: | RUBBER-SUPPORT |
| Парткод: | JC73-00280A |
| Деталь: | ETC-BRACKET |
| Парткод: | JC98-01267A |
| Деталь: | Scanner |
| Парткод: | JC97-03762A |
| Деталь: | Scanner |
| Парткод: | JC97-03762B |
| Деталь: | Scanner |
| Парткод: | JC97-03762C |
| Деталь: | Scanner |
| Парткод: | JC97-03762D |
| Деталь: | Scanner |
| Парткод: | JC97-03762J |
| Деталь: | ELA UNIT-REVERSE |
| Парткод: | JC96-04800A |
| Деталь: | COVER-NOISE |
| Парткод: | JC95-01189A |
| Деталь: | COVER-LIU |
| Парткод: | JC63-01518A |
| Деталь: | PBA-FAX CARD P |
| Парткод: | JC92-02060D |
| Деталь: | PBA-FAX CARD S |
| Парткод: | JC92-02060E |
| Деталь: | FAN |
| Парткод: | JC31-00050A |
| Деталь: | Option cassette |
| Парткод: | CLX-S6250A |
| Деталь: | PLATEN-LOWER |
| Парткод: | JC97-03758A |
| Деталь: | COVER-SCAN LOWER |
| Парткод: | JC63-01505C |
| Деталь: | ICT-INSERT SHAFT |
| Парткод: | JB70-00154A |
| Деталь: | PMO-PULLEY |
| Парткод: | JB72-00763A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | ELA HOU-BRACKET MOTOR |
| Парткод: | JC96-05285A |
| Деталь: | HARNESS-DADF LOWER |
| Парткод: | JC39-00850A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-001067 |
| Цена: | 420 ₽ |
| Деталь: | PMO-HOLDER BELT |
| Парткод: | JB72-00764A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | SPRING ETC-BELT |
| Парткод: | JB61-00059A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001135 |
| Деталь: | PMO-LEVER SENSOR |
| Парткод: | JC72-00755A |
| Деталь: | ICT-SHAFT CCD |
| Парткод: | JB70-00145A |
| Деталь: | CCDM |
| Парткод: | JC97-03735A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | GROUND-SCAN LOWER |
| Парткод: | JC63-01559A |
| Деталь: | GROUND-CONNECTION |
| Парткод: | JC63-01565A |
| Деталь: | PBA-SCAN JOINT |
| Парткод: | JC92-02245A |
| Деталь: | COVER-ADF LOCK LO |
| Парткод: | JC63-01555C |
| Деталь: | SHAFT-ADF LOCK |
| Парткод: | JC66-01831A |
| Деталь: | PLATE-ADF LOCK |
| Парткод: | JC61-02216A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001395 |
| Деталь: | LINK-SCAN LOCK |
| Парткод: | JC66-01750A |
| Деталь: | SHAFT-SCAN LOCK |
| Парткод: | JC66-01832A |
| Деталь: | Ring-C |
| Парткод: | 6044-000159 |
| Деталь: | COVER-ADF LOCK UP |
| Парткод: | JC63-01552C |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-01998A |
| Деталь: | LEVER-SCAN LOCK |
| Парткод: | JC66-01888A |
| Деталь: | SPRING ETC-REVERSE |
| Парткод: | JC61-02449A |
| Деталь: | SUPPORT-SCAN |
| Парткод: | JC61-02214A |
| Деталь: | SHAFT-HINGE SCAN |
| Парткод: | JC66-01830A |
| Деталь: | SPRING ETC-SUPPORT |
| Парткод: | JC61-02448A |
| Деталь: | SHAFT-DAMPER HINGE |
| Парткод: | JC66-01907A |
| Деталь: | SPRING ETC-DAMPER |
| Парткод: | JC61-02511A |
| Деталь: | SUPPORT-DAMPER |
| Парткод: | JC61-02491A |
| Деталь: | COVER-OUTBIN |
| Парткод: | JC63-01564C |
| Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
| Парткод: | JB61-00076A |
| Деталь: | ACTUATOR-OUT_FULL |
| Парткод: | JC66-01624A |
| Деталь: | HARNESS-BIN FULL |
| Парткод: | JC39-00857A |
| Деталь: | HARNESS-OPE |
| Парткод: | JC39-01325A |
| Деталь: | FLAT CABLE |
| Парткод: | JC39-01334A |
| Деталь: | HARNESS-SCAN GND |
| Парткод: | JC39-00841A |
| Деталь: | HARNESS-CCD HOME |
| Парткод: | JC39-00856A |
| Деталь: | HARNESS-SCAN MOTOR |
| Парткод: | JC39-00890A |
| Деталь: | HARNESS-SCAN |
| Парткод: | JC39-00848A |
| Деталь: | DADF |
| Парткод: | JC97-03760A |
| Деталь: | DADF-COVER PLATEN |
| Парткод: | JC97-03748A |
| Деталь: | DADF-COVER OPEN |
| Парткод: | JC97-03755A |
| Деталь: | DADF-UPPER |
| Парткод: | JC97-03749A |
| Деталь: | DRIVE-DADF |
| Парткод: | JC93-00208A |
| Деталь: | DADF-LOWER |
| Парткод: | JC97-03759A |
| Деталь: | MEA UNIT-HINGE_DADF |
| Парткод: | JC97-03038A |
| Деталь: | MEA-UNIT_HINGE |
| Парткод: | JC97-03220A |
| Цена: | 420 ₽ |
| Деталь: | COVER-DADF_R |
| Парткод: | JC63-01606D |
| Деталь: | COVER-HANDLE PLATEN |
| Парткод: | JC63-01579C |
| Деталь: | COVER-ADF CONNECTOR |
| Парткод: | JC63-00998F |
| Деталь: | PBA-DADF |
| Парткод: | JC92-01954A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | LABEL-CLEANING |
| Парткод: | JC68-02194A |
| Деталь: | COVER-ADF LOCK PL |
| Парткод: | JC63-01551C |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000282 |
| Деталь: | CBF HARNESS-GND ZENER |
| Парткод: | JC39-00509A |
| Деталь: | CBF HARNESS-GND1 |
| Парткод: | JC39-00507A |
| Деталь: | HARNESS-DADF UPPER |
| Парткод: | JC39-00851A |
| Деталь: | DRIVE FUSER-BRACKET |
| Парткод: | JC93-00152A |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00075A |
| Деталь: | CLUTCH-BK DEVE |
| Парткод: | JC47-00006D |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | GUIDE-FUSER R |
| Парткод: | JC61-01851A |
| Деталь: | BRACKET-FUSER DRIVE L |
| Парткод: | JC61-01859B |
| Деталь: | BRACKET-FUSER R BLDC |
| Парткод: | JC61-01860B |
| Деталь: | BRACKET-FUSER MOTOR |
| Парткод: | JC61-02550A |
| Деталь: | LATCH-M-HUB CLUTCH |
| Парткод: | JC66-01070A |
| Деталь: | GEAR-FUSER RDCN OUT V |
| Парткод: | JC66-01155A |
| Деталь: | SHAFT-CLUTCH FU |
| Парткод: | JC66-01341A |
| Деталь: | GEAR-DRV FU |
| Парткод: | JC66-01362A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01366A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01368A |
| Деталь: | GEAR- RDCN FU |
| Парткод: | JC66-01386A |
| Деталь: | GEAR-RDCN FU |
| Парткод: | JC66-01387A |
| Деталь: | GEAR-RDCN FU |
| Парткод: | JC66-01388A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01393A |
| Деталь: | GEAR-RDCN FUCZ |
| Парткод: | JC66-02434A |
| Деталь: | MPR-RING CHARGE |
| Парткод: | JG74-10541A |
| Деталь: | Scanner |
| Парткод: | JC97-03762A |
| Деталь: | Scanner |
| Парткод: | JC97-03762B |
| Деталь: | Scanner |
| Парткод: | JC97-03762C |
| Деталь: | Scanner |
| Парткод: | JC97-03762D |
| Деталь: | Scanner |
| Парткод: | JC97-03762J |
| Деталь: | OPE |
| Парткод: | JC97-03734A |
| Деталь: | OPE |
| Парткод: | JC97-03734D |
| Деталь: | OPE |
| Парткод: | JC97-03734F |
| Деталь: | OPE |
| Парткод: | JC97-03734G |
| Деталь: | OPE |
| Парткод: | JC97-03734L |
| Деталь: | PLATEN |
| Парткод: | JC97-03761A |
| Деталь: | DADF |
| Парткод: | JC97-03760A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02111B |
| Деталь: | DADF-LOWER |
| Парткод: | JC97-03759A |
| Деталь: | COVER-DADF_LOWER |
| Парткод: | JC63-01589A |
| Деталь: | PLATE-WHITE BAR |
| Парткод: | JC61-02686A |
| Деталь: | SPRING ETC-SEPERATE P/UP |
| Парткод: | JC61-70935A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | BUSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | GROUND-FEED EXIT |
| Парткод: | JC63-01662A |
| Деталь: | GROUND-DADF |
| Парткод: | JC63-01661A |
| Деталь: | GEAR-FEED IDLE D |
| Парткод: | JC66-01755A |
| Деталь: | MEA-GEAR FEED |
| Парткод: | JC97-03085A |
| Деталь: | GEAR-EXIT |
| Парткод: | JC66-01757A |
| Деталь: | GEAR-FEED IDLE C |
| Парткод: | JC66-01754A |
| Деталь: | Actuator-Feed |
| Парткод: | JC66-01766A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | Roller-Feed |
| Парткод: | JC66-01823A |
| Деталь: | ACTUATOR-REGI |
| Парткод: | JC66-01762A |
| Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
| Парткод: | JB61-00076A |
| Деталь: | ROLLER-MIDDLE |
| Парткод: | JC66-01822A |
| Деталь: | COVER-DADF_MIDDLE |
| Парткод: | JC63-01597A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-01824A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SHEET-WHITE_BAR |
| Парткод: | JC63-02659A |
| Деталь: | DAMPER-DADF UPPER |
| Парткод: | JC66-01876A |
| Деталь: | Ring-CS |
| Парткод: | 6044-000001 |
| Деталь: | Washer-Plain |
| Парткод: | 6031-001255 |
| Деталь: | HARNESS-DADF SENSOR 1 |
| Парткод: | JC39-00853A |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001080 |
| Деталь: | ELA UNIT-FRAME REV |
| Парткод: | JC96-04822A |
| Деталь: | ROLLER-M-IDLE FEED |
| Парткод: | JC66-00529A |
| Деталь: | SHAFT-REV IDLE |
| Парткод: | JC66-01833A |
| Деталь: | PLATE-REVERSE |
| Парткод: | JC61-02217A |
| Деталь: | PMO-IDLE KNOCK UP MP |
| Парткод: | JC72-01004A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001185 |
| Деталь: | Screw-Taptite |
| Парткод: | 6003-000196 |
| Деталь: | MEC-Brush Antistatic |
| Парткод: | JC75-00095A |
| Деталь: | FRAME-REVERSE |
| Парткод: | JC61-02199A |
| Деталь: | BUSH-6_D |
| Парткод: | JC61-00423A |
| Деталь: | Ring-E |
| Парткод: | 6044-000125 |
| Деталь: | PMO-Roller FD F |
| Парткод: | JC72-41007A |
| Деталь: | SPRING ETC-REVERSE |
| Парткод: | JC61-02449A |
| Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
| Парткод: | JB61-00076A |
| Деталь: | ACTUATOR-REV_OUT |
| Парткод: | JC66-01621A |
| Деталь: | HOLDER-SHAFT CAM |
| Парткод: | JC61-02212A |
| Деталь: | SHAFT-CAM REV |
| Парткод: | JC66-01618A |
| Деталь: | CAM-REV |
| Парткод: | JC66-01620A |
| Деталь: | COVER-BOTTOM REV |
| Парткод: | JC63-01556A |
| Деталь: | COVER-MIDDLE INLET |
| Парткод: | JC63-01561A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001095 |
| Деталь: | ACTUATOR-MIDDLE |
| Парткод: | JC66-01622A |
| Деталь: | GROUND-BOTTOM |
| Парткод: | JC63-01566A |
| Деталь: | SOLENOID-PICKJJP |
| Парткод: | JC33-00022A |
| Цена: | 600 ₽ |
| Деталь: | GEAR-REV 65/31 |
| Парткод: | JC66-01615A |
| Деталь: | GEAR-REV 65 |
| Парткод: | JC66-01631A |
| Деталь: | GEAR-EXIT_DRV17 |
| Парткод: | JC66-00810A |
| Деталь: | GROUND-REV MAIN |
| Парткод: | JC63-01558A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-01836A |
| Деталь: | ROLLER-MIDDLE |
| Парткод: | JC66-01835A |
| Деталь: | ROLLER-REVERSE |
| Парткод: | JC66-01834A |
| Деталь: | ROLLER-ACT MIDDLE |
| Парткод: | JC66-01829A |
| Деталь: | GUIDE-BOTTOM REV |
| Парткод: | JC61-02510A |
| Деталь: | GEAR-REMOVE |
| Парткод: | JC66-01614A |
| Деталь: | REV GND HARNESS |
| Парткод: | JC39-00840A |
| Деталь: | HARNESS-REV-SWING |
| Парткод: | JC39-00846A |
| Деталь: | HARNESS-REV MOT EXIT |
| Парткод: | JC39-00845A |
| Деталь: | FRAME-LEFT |
| Парткод: | JC93-00150A |
| Деталь: | BOARD-PTL |
| Парткод: | JC98-01242A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-000132 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-001093 |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | SPRING ETC-PTB_C |
| Парткод: | JC61-01883A |
| Деталь: | SPRING ETC-PTB_B |
| Парткод: | JC61-01884A |
| Деталь: | SPRING ETC-DEVE |
| Парткод: | JC61-01885A |
| Деталь: | GUIDE-RAIL-L |
| Парткод: | JC61-01908A |
| Деталь: | FRAME-LEFT |
| Парткод: | JC61-01926A |
| Деталь: | LABEL-BLANK |
| Парткод: | JC68-01503B |
| Деталь: | LABEL(R)-C |
| Парткод: | JC68-01504A |
| Деталь: | LABEL(R)-M |
| Парткод: | JC68-01505A |
| Деталь: | LABEL(R)-Y |
| Парткод: | JC68-01506A |
| Деталь: | LABEL-CAUTION |
| Парткод: | JC68-02050A |
| Деталь: | FRAME BASE-LEFT |
| Парткод: | JC93-00149A |
| Деталь: | ELA UNIT-PTB TERMINAL |
| Парткод: | JC96-05423A |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC93-00151A |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC93-00151B |
| Деталь: | GREASE-BEARING |
| Парткод: | 0205-001003 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000301 |
| Деталь: | SCREW-MACHINE |
| Парткод: | 6006-001193 |
| Деталь: | SCREW-SPECIAL |
| Парткод: | 6009-001396 |
| Деталь: | SCREW-HEX |
| Парткод: | 6009-001492 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001317 |
| Деталь: | Spring-CS |
| Парткод: | 6107-001318 |
| Деталь: | Spring-ES |
| Парткод: | 6107-001320 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-000132 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-001093 |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00075A |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00091A |
| Цена: | 4 800 ₽ |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00117A |
| Деталь: | HARNESS-PTB DRAW_FR |
| Парткод: | JC39-00663A |
| Деталь: | HARNESS-FUSER_GND |
| Парткод: | JC39-00956A |
| Деталь: | GUIDE-_M_BUSH HARNESS S |
| Парткод: | JC61-01012A |
| Деталь: | BRACKET-GEAR DEVE |
| Парткод: | JC61-01837A |
| Деталь: | BRACKET-DRAWER_PTB |
| Парткод: | JC61-01898A |
| Деталь: | GUIDE-RAIL-R |
| Парткод: | JC61-01907A |
| Деталь: | FRAME-RIGHT |
| Парткод: | JC61-01925C |
| Деталь: | BRACKET-DEVE_DR B |
| Парткод: | JC61-02160B |
| Деталь: | BRACKET-MAIN COVER |
| Парткод: | JC61-02775A |
| Деталь: | BRACKET-BLDC MOTOR |
| Парткод: | JC61-02777A |
| Деталь: | HOLDER-PTB GEAR |
| Парткод: | JC61-02778A |
| Деталь: | COVER-PTB GEAR |
| Парткод: | JC63-02079A |
| Деталь: | CAM-PTB COUPLING |
| Парткод: | JC66-01343A |
| Деталь: | CAM-OPC COUPLING |
| Парткод: | JC66-01344A |
| Деталь: | GEAR-COUPLING DRV PTB |
| Парткод: | JC66-01361A |
| Деталь: | GEAR-DRV2 DEVE |
| Парткод: | JC66-01365A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01367A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01369A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01370A |
| Деталь: | GEAR-IDLE FEED |
| Парткод: | JC66-01373A |
| Деталь: | GEAR- IDLE PTB A |
| Парткод: | JC66-01377A |
| Деталь: | GEAR-IDLE PTB B |
| Парткод: | JC66-01378A |
| Деталь: | GEAR-RDCN DEVE |
| Парткод: | JC66-01380A |
| Деталь: | GEAR-RDCN OPC |
| Парткод: | JC66-01389A |
| Деталь: | GEAR-IDLE DEVE |
| Парткод: | JC66-01394A |
| Деталь: | GEAR-RDCN PTB A |
| Парткод: | JC66-02047A |
| Деталь: | GEAR-RDCN OPC A |
| Парткод: | JC66-02048A |
| Деталь: | GEAR-IDLE PTB C |
| Парткод: | JC66-02049A |
| Деталь: | SHAFT-PTB GEAR |
| Парткод: | JC66-02105A |
| Деталь: | GEAR-DRV DEVE CZ |
| Парткод: | JC66-02443A |
| Деталь: | CAP-OPC GEAR |
| Парткод: | JC67-00341A |
| Деталь: | PBA SUB-TEMP |
| Парткод: | JC92-02107A |
| Деталь: | DRIVE MAIN-GEAR OPC |
| Парткод: | JC93-00112A |
| Деталь: | FRAME BASE-RIGHT |
| Парткод: | JC93-00148A |
| Деталь: | MEA UNIT-SWING |
| Парткод: | JC97-02851A |
| Деталь: | MEA UNIT-COUPLING OPC |
| Парткод: | JC97-02853A |
| Деталь: | OPE |
| Парткод: | JC97-03734A |
| Деталь: | OPE |
| Парткод: | JC97-03734D |
| Деталь: | OPE |
| Парткод: | JC97-03734F |
| Деталь: | OPE |
| Парткод: | JC97-03734G |
| Деталь: | OPE |
| Парткод: | JC97-03734L |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02513A |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02513E |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02513G |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02513K |
| Деталь: | Cover-OPE |
| Парткод: | JC63-02513L |
| Деталь: | KEY-POWER |
| Парткод: | JB64-00114B |
| Деталь: | KEY-POWER_B |
| Парткод: | JC64-00443A |
| Деталь: | KEY-START |
| Парткод: | JC64-00391A |
| Деталь: | KEY-STOP |
| Парткод: | JC64-00393A |
| Деталь: | KEY-TEL |
| Парткод: | JC64-00394A |
| Деталь: | KEY-OK |
| Парткод: | JC64-00389A |
| Деталь: | KEY-CIRCLE |
| Парткод: | JC64-00445A |
| Деталь: | KEY-BACK |
| Парткод: | JC64-00447B |
| Деталь: | KEY-FAX |
| Парткод: | JC64-00387A |
| Деталь: | HOLDER-LCD |
| Парткод: | JC61-02792A |
| Деталь: | BRACKET-LCD |
| Парткод: | JC61-03703A |
| Деталь: | LCD |
| Парткод: | JC07-00012A |
| Деталь: | KEY-EXTRA |
| Парткод: | JC64-00528A |
| Деталь: | LENS-LED_STATUS |
| Парткод: | JC67-00429A |
| Деталь: | PBA-OPE |
| Парткод: | JC92-02242A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | SPONGE-LCD |
| Парткод: | JC72-01529A |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02111B |
| Деталь: | DADF-COVER PLATEN |
| Парткод: | JC97-03748A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000196 |
| Деталь: | COVER-PLATEN |
| Парткод: | JC63-01623D |
| Деталь: | PAD-SOLENOID |
| Парткод: | JC69-01327A |
| Деталь: | SOLENOID-LIFTING |
| Парткод: | JC33-00031A |
| Деталь: | GUIDE-EXTENSION |
| Парткод: | JC61-02418D |
| Деталь: | GROUND-PLATEN |
| Парткод: | JC63-01660A |
| Деталь: | Sheet-White Sponge |
| Парткод: | JC63-00209A |
| Цена: | 800 ₽ |
| Деталь: | SPRING ETC-MID IDLE |
| Парткод: | JC61-02429A |
| Деталь: | ROLLER-IDLE |
| Парткод: | JC66-01764A |
| Деталь: | ROLLER-IDLE SCF |
| Парткод: | JC66-01022B |
| Деталь: | Shaft-Feed Idle |
| Парткод: | JC66-01817A |
| Деталь: | LEVER-JAM_FEED |
| Парткод: | JC66-01749A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001554 |
| Деталь: | SPONGE-PLATEN DUMMY |
| Парткод: | JC72-01440A |
| Деталь: | SPONGE-DADF PLATEN |
| Парткод: | JC72-01439A |
| Деталь: | LEVER-LIFTING_EXIT |
| Парткод: | JC66-01774A |
| Деталь: | DADF STACKER-TX |
| Парткод: | JC97-03756A |
| Деталь: | HARNESS-DADF GND |
| Парткод: | JC39-00892A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000269 |
| Деталь: | CABLE CLAMP |
| Парткод: | 6502-001093 |
| Деталь: | MEA UNIT-COVER TOP |
| Парткод: | JC97-03056A |
| Деталь: | COVER-REVERSE TOP |
| Парткод: | JC63-01542A |
| Деталь: | SHAFT-REV IDLE |
| Парткод: | JC66-01833A |
| Деталь: | ROLLER-M-IDLE FEED |
| Парткод: | JC66-00529A |
| Деталь: | SPRING ETC-REVERSE |
| Парткод: | JC61-02449A |
| Деталь: | GUIDE-PAPER REV |
| Парткод: | JC61-02218A |
| Деталь: | SPRING ACTUATOR S/W |
| Парткод: | JC61-02449A |
| Деталь: | MEC-Brush Antistatic |
| Парткод: | JC75-00095A |
| Деталь: | SHAFT-STACKER |
| Парткод: | JC66-00594A |
| Деталь: | GUIDE-STACKER SUB |
| Парткод: | JC61-00712A |
| Деталь: | GROUND REV FRONT |
| Парткод: | JC63-01557A |
Коды ошибок
01-000
01-004
01-005
01-006, 01-018
01-009
01-010
01-015
01-017
02-000
02-001, 02-006
02-002
02-005
03-000
03-007, 03-008, 03-009
03-015
04-001, 04-002, 04-008
08-000, 08-001
08-002, 08-006
08-003, 08-010
08-004, 08-006
08-008
11-003
12-000, 12-001
12-004
18-000, 18-001
18-002, 18-003
21-002
21-003
21-010
21-018
21-019
28-001, 28-002, 28-003
Описание
| Error code: | 01-000 |
| Display: | Door is open or Check Transfer belt |
| Description: | Front cover or top cover is opened. |
| Causes: | 1. Harness is defective, Connector is not connected properly. 2. Sensor is defective. |
| Remedy: | 1. Ensure the Front and Top Covers are closed properly. 2. If the PTB [paper transfer belt] is not installed, install it. 3. Check the cover switch harness between Main PBA and HVPS. 4. Check the 24V enable signal on Main PBA. If the voltage is high(5V), replace the Main PBA. 5. Check the 24V1 on SMPS. If there is no output, replace the SMPS board. |
| Error code: | 01-004 |
| Display: | Paper Jam in MP tray |
| Description: | The paper from the MP tray has not reached to the feed sensor within a predetermined period of time after pick up. |
| Causes: | 1. Pickup roller rubber is worn out. 2. Pickup Clutch does not work. 3. Feed Sensor is defective. |
| Remedy: | 1. Ensure the Front and Top Covers are closed properly. 2. If the PTB [paper transfer belt] is not installed, install it. 3. Check the cover switch harness between Main PBA and HVPS. 4. Check the 24V enable signal on Main PBA. If the voltage is high(5V), replace the Main PBA. 5. Check the 24V1 on SMPS. If there is no output, replace the SMPS board. |
| Error code: | 01-005 |
| Display: | Paper jam in tray 1 |
| Description: | The paper from the tray1 has not reached to a feed sensor within a predetermined period of time after pick up. |
| Causes: | 1. Pickup roller rubber is worn out. 2. Pickup Clutch does not work. 3. Feed Sensor is defective. |
| Remedy: | 1. Take out the cassette and remove the jammed paper. 2. Check the separator pad of the cassette. If it become loose or has reached its PM interval, replace it. * MEA Holder Pad (JC97-02892A) 3. If the pick up roller does not rotate, check the Gear Pick up(JC97-02895A) and solenoid. If it is defective, replace it. 4. If the pick up roller rotates but the paper is not feeding, replace the Feed motor (JC31-00112A). 5. Check the connectors are plugged in properly on CN4,5,9 on HVPS. 6. Check the connectors are plugged in properly on CN1,2 on HVPS and check the flat cable. 7. Check that the PM interval for Pick-up Roller has expired. If so, replace it. 8. Check the actuator on the Feed Sn. If it does not work correctly, replace the feed-sensor. 9. Check for proper positioning of the Knockup-Plate(JC97-02888A) 10. Check if the Guide-adjust is adjusted for paper entry properly. |
| Error code: | 01-006, 01-018 |
| Display: | Paper jam in tray 2 |
| Description: | The paper from the tray2 has not reached to a feed sensor within a predetermined period of time after pick up. |
| Causes: | 1. Pickup roller rubber is worn out. 2. Pickup Clutch does not work. 3. Feed Sensor is defective. |
| Remedy: | 1. Take out the 2nd cassette and remove the jammed paper. 2. If the pick up roller does not rotate, check the Gear Pick up(JC97-03228A). If it is defective, replace it. 3. If the pick up roller rotates but the paper is not feeding, replace the Clutch-Feed(JC97-03270A). 4. Check the connector is plugged in properly on CN9 connector on Main PBA 5. Check the sensor and connector in SCF. |
| Error code: | 01-009 |
| Display: | Paper jam inside of machine |
| Description: | Paper jam inside of machine 1. At Power On, the paper is jamming at Regi sensor or Feed sensor. 2. At printing, the paper is detecting at Regi sensor or Feed sensor continuously. 3. At printing, the paper is not detected at exit sensor within a predetermined time. |
| Causes: | 1. Feed sensor or Regi Sensor is defective. 2. Exit sensor is defective. 3. Feed Clutch is defective. 4. Regi Clutch is defective. |
| Remedy: | 1. Check the Spring tension of the Regi. roller and Regi shaft. If the spring is defective, replace it. 2. Check and replace the exit sensor. 3. Check the connectors are plugged in properly on the flat cable / exit sensor harness / Feed sensor harness. 4. Check the OPC motor is working. / OPC lock. 5. Check PTB [paper transfer belt] working condition, if PTB-Belt is torn replace it. |
| Error code: | 01-010 |
| Display: | Paper jam in exit area |
| Description: | Paper jam in exit area |
| Causes: | There is paper jammed under the Exit Sensor at Power ON, or the Fuser Actuator Arm, or Exit Sensor is defective. |
| Remedy: | 1. If the actuator fuser sensing part is binding or broken, replace the Fuser Actuator [JC66-01404A] and exit sensor if required. 2. Check the connectors are plugged in properly on the flat cable / Exit sensor harness. |
| Error code: | 01-015 |
| Display: | Paper jam at the top of duplex path |
| Description: | 1. At Power On, if the Fuser Exit Sensor and/or Reverse Sensor detects paper. 2. At Printing, Fuser Exit sensor and Reverse Sensor is not on within a predetermined time after paper moves into the Reverse path. |
| Causes: | 1. Check the Fuser Exit Sensor, Reverse Sensor Harness and Connector. 2. Check if the UI message is changed in the Fuser Exit Sensor and the Reverse Sensor operation (EDC Mode). 3. Check the Reverse Motor and Fuser Exit Motor. (EDC Mode). |
| Remedy: | 1. Lift the Scan Unit and Open the Reverse Top Cover and the Middle Open Cover. Check for Paper in the Fuser and Reverse Unit. 2. If the paper is jammed, remove the paper in the Fuser. 3. If the paper is not present, check if the Fuser Exit and Reverse actuator’s return action as the EDC Mode just checks on/off. If so, check the actuator springs of the Fuser Exit and Reverse return spring tension is sufficient,. and sensor arm works smoothly. ( EDC Mode -> Test Routines -> Engine Diagnostic Test -> 102-370 / 102-xxx) 4. If the Actuator Arm in the Fuser and Reverse is Operating properly. Check if Reverse motor and Fuser Exit Motor is turning properly in EDC Mode. ( EDC Mode -> Test Routines -> Engine Diagnostic Test -> 100-xxx / 100-xxx) |
| Error code: | 01-017 |
| Display: | Output bin Full Output bin Full. Remove printed paper |
| Description: | When the tray limit is reached, the out-bin full sensor is on for 600ms. |
| Causes: | 1. Check the Out-Bin Full Sensor. 2. Check if the UI message is changed by the Out-Bin Full Sensor operation. 3. Check the Out-Bin Full Sensor Harness and Connector. |
| Remedy: | 1. Check the BIN_FULL_SENSOR (picture’1’ below) by pushing the trigger (picture’2’ below) beneath the SCAN_ ASSY. Check if the UI message is changed by the Out-Bin Full Sensor operation 2. Check if the Harness is defective. Check if the connector is connected properly. 3. Replace the Main PBA or the Scan_Joint PBA or the Panel PBA. 4. Enter the EDC mode and follow the below sequence after the repair is done. ( EDC Mode - Test Routines - 101-Clutch - 0190-OutBin Full - Start - Status check - Stop ) |
| Error code: | 02-000 |
| Display: | System error: #02-000. Please turn off then on |
| Description: | 1. At warm up, the temperature is less than reference temperature for 20 sec. 2. Abnormal ADC has occurred. 3. ZeroCross Signal detect error has occurred. |
| Causes: | Fuser Unit is not installed and AC is not supplied to the Heat Lamp. |
| Remedy: | 1. In case of meaning 1, replace the Fuser unit. 2. In case of meaning 3, replace the Engine contol board or Fuser control board or SMPS. |
| Error code: | 02-001, 02-006 |
| Display: | Fuser Error :#02-001 Please turn off then on. Fuser Error :#02-006 Please turn off then on. |
| Description: | At Warm-up, this error has occurred. The machine does not work until power off/on. If the error code reoccurs, follow the Troubleshooting method below. |
| Causes: | Fuser Unit is not installed and AC is not supplied to the Heat Lamp. |
| Remedy: | 1. Turn off the power. And turn on the power. 2. Check the connection of the Fuser AC on FDB 3. Check the Fuser control harness 4. Check the resistance value of the thermostat. If the value is infinite, replace the thermostat. 5. If the problem persists, replace the Fuser unit. 6. Replace the SMPS board or FDB (Fuser drive board). |
| Error code: | 02-002 |
| Display: | Fuser error: #02-002. Please turn off then on |
| Description: | 1. At warm up, the temperature keep up the lower temperature for regular time. 2. At warm up, after temperature checking time, more than regular temperature and for more 10 sec. 3. At standby or sleep, more than Top temp and for a few minutes. 4. At power save mode, the temperature keep up the constant for regular time. |
| Causes: | The machine can not control fuser temperature. |
| Remedy: | Replace Fuser or Fuser control board or Engine controller. |
| Error code: | 02-005 |
| Display: | System Error :#02-005 Please turn off then on. |
| Description: | The ADC port is short. |
| Causes: | The machine can not control fuser temperature. |
| Remedy: | 1. Turn the power off then on again. 2. If the problem persists, replace the Main PBA. |
| Error code: | 03-000 |
| Display: | Motor does not operate: #03-000. Please turn off then on |
| Description: | After ITB BLDC motor is operated, the ready signal is not occurred within 1 sec. |
| Causes: | 1. Harness is defective, Connector is not connected properly. 2. Main BLDC Motor is defective. 3. Main Board is defective. |
| Remedy: | Check the ITB waste toner is eliminated properly. If the ITB waste toner overflows, the motor error will be occurred because of increasing the torque. Replace the developing unit. |
| Error code: | 03-007, 03-008, 03-009 |
| Display: | Motor error Error: #03-007/008/009 Turn off then on |
| Description: | Motor Signal is abnormal. |
| Causes: | 1. Harness is defective, Connector is not connected properly. 2. Color OPC BLDC Motor is defective. 3. Main Board is defective. |
| Remedy: | 1. Check the motor connector. Reconnect the harness. 2. If the problem persists, replace the BLDC motor. 3. If the problem persists after replacing BLDC motor, replace the Main PBA. |
| Error code: | 03-015 |
| Display: | Motor error Error: #03-015 Turn off then on |
| Description: | Fan does not operate. |
| Causes: | Fan is defective. |
| Remedy: | 1. Check the CN17 connector (FAN) on Main PBA. 2. If the FAN is defective, replace it. 3. If the problem persists, replace the Main PBA. |
| Error code: | 04-001, 04-002, 04-008 |
| Display: | LSU error: #. Please turn off then on.A. |
| Description: | Laser beam detect signal has not occurred or is irregular. LSU motor does not operate. |
| Causes: | 1. Harness is defective, Connector is not connected properly. 2. LSU is defective. 3. Main Board is defective. |
| Remedy: | 1. Check the LSU connector on Main PBA. Reconnect it. If necessary, replace it. 2. If the problem persists, replace the LSU or Main PBA. |
| Error code: | 08-000, 08-001 |
| Display: | Original paper Jam Original paper jam inside of scanner. Remove Jam |
| Description: | The lead edge of the document failed to actuate the Registration sensor within the predetermined time after initialization of Paper Pick up. |
| Causes: | 1. Pick up roller is defective. 2. Scan sensor or actuator is defective. 3. Document paper path is contaminated. |
| Remedy: | 1. Check the paper path for a small piece of paper that may have been torn from an original; or foreign materials such as paper clips, extracted staples, etc. 2. Check the condition of the Pick-up, Paper Feed Roller and DADF Rubber, it may have reached its PM interval. 3. Registration Sensor change 4. Registration Sensor drive Board change 5. Pick-up Solenoid change |
| Error code: | 08-002, 08-006 |
| Display: | Original paper jam inside of scanner |
| Description: | The leadedge of the document has not reached to scan sensor after being sensed by the regi sensor. |
| Causes: | 1. Gate sensor or actuator is defective. 2. Document paper path is contaminated. 3. WHITE BAR SHEET is not attached properly. 4. WHITE BAR is defective. |
| Remedy: | 1. Check the paper path for a small piece of paper that may have been torn from an original; or foreign materials such as paper clips, extracted staples, etc. 2. Check that the White bar sheet is properly set to the guide. 3. Check and clean the Registration Roller, replace as is necessary. 4. Check and clean the Exit Roller, replace as is necessary. 5. Check and clean the Scan Senor for paper dust, replace as is necessary. 6. Check the signals from the Scan Sensor Drive Board, replace as is necessary. 7. Check and clean the Exit Solenoid, replace as is necessary. |
| Error code: | 08-003, 08-010 |
| Display: | Original paper Jam Original paper jam inside of scanner. Remove Jam |
| Description: | At duplex scan, the leadedge of the document has not reached to the duplex sensor after scanning the front side. |
| Causes: | 1. Duplex sensor or actuator is defective. 2. There is the contamination on paper path or a defective assembly. 3. The Duplex Gate does not work properly. 4. Duplex motor is defective. |
| Remedy: | 1. Check and clean the Duplex Solenoid, replace as is necessary. 2. Check and clean the Exit Roller, replace as is necessary. 3. Check the signals from the DADF Drive Board, replace as is necessary. |
| Error code: | 08-004, 08-006 |
| Display: | Original paper Jam Original paper jam inside of scanner. Remove Jam |
| Description: | The bottom edge of the document failed to pass the scan sensor after the leadedge of the document has reached to the duplex sensor and scan sensor. |
| Causes: | 1. Scan sensor or actuator is defective. 2. There is the contamination on paper path or a defective assembly. |
| Remedy: | 1. Check the paper path for a small piece of paper that may have been torn from an original; or foreign materials such as paper clips, extracted staples, etc. 2. Check and clean the Registration Roller, replace as is necessary. 3. Check and clean the Exit Roller, replace as is necessary. 4. Check and clean the Scan Sensor for paper dust, replace as is necessary. 5. Check the signals from the Scan Sensor Drive Board, replace as is necessary. 6. Check and clean the Exit Solenoid, replace as is necessary. |
| Error code: | 08-008 |
| Display: | Scanner door Open Door of scanner is open. Close it |
| Description: | DADF door is opened. |
| Causes: | The cover open sensor is defective. |
| Remedy: | Check if the DADF cover is closed. If opened, close the DADF cover until it blocks the PHOTO-INTERRUPTER. If UI message is not changed, open the COVER-DADF REAR and replace the PHOTO-INTTERRUPTER. |
| Error code: | 11-003 |
| Display: | Scanner locked Scanner locking switch is locked. Release it |
| Description: | Scanner locking switch is locked or Home checking is abnormal. |
| Causes: | Scanner locking switch is locked. |
| Remedy: | Check if the scanner locking switch is locked. If the scanner locking switch is locked, move the switch 1 to 2 |
| Error code: | 12-000, 12-001 |
| Display: | Paper mismatch Tray1/2 Load [A4] [Plain] Continue Cancel x |
| Description: | The paper in tray1 and/or tray 2 does not match the size selected. |
| Causes: | 1. Check that the size selected matches the copy paper in the tray selected. 2. Check the harness and connector of the Trya1/2 Size Sensor. 3. Tray1/2 Size Sensors and it operation. |
| Remedy: | 1. Pull out Tray1/2 Cassette. 2. Load [Letter] paper in Tray1/2 Cassette. 3. Install Tray1/2 Cassette. Check if Feed-Actuator works correctly. 1. Check the tension spring is properly loaded on the Actuator_Feed. 2. Check that the connector for the photo sensor is plugged in securely. |
| Error code: | 12-004 |
| Display: | Paper mismatch MP. Load [A4] [Plain] Continue Cancel x |
| Description: | The paper in Manual Tray does not match the size selected. |
| Causes: | 1. Check that the size selected matches the copy paper in the Manual Tray. 2. Check the harness and connector of the MP Size Sensor. 3. MP Size Sensor is defective. |
| Remedy: | 1. Open MP Tray. 2. Load [Letter] paper in MP Tray. 3. If the problem persists, check if the MP_Paper_Detect_Actuator works correctly. a. Check the spring is put in the right place of the actuator b. Check the harness and the connector fit on the photo sensor. c. Check the connection of the Drawer_MP and screw points. |
| Error code: | 18-000, 18-001 |
| Display: | Fax memory is almost full. Fax memory is full. Print or remove received fax Job Too many faxes are queued to be sent. Wait or remove queued job. Too many faxes are received. Print or remove job |
| Description: | Cannot execute the Fax function. |
| Causes: | There is not enough fax memory. |
| Remedy: | 1. “Fax memory is almost full.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. 2. “Fax memory is full. Print or remove receive fax job.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. 3. “Too many faxes are queued to be sent. Wait or remove queued job.” message case : 1) Check the delayed Fax job. (Reserved delay send job) 2) If the number of reserved send jobs is reached Max Job Count, reservation of send job is denied. 3) So, remove the delayed job . (Fax mode > Menu > Fax Feature > Cancel job) 4. “Too many faxes are received. Print or remove job.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. |
| Error code: | 18-002, 18-003 |
| Display: | Fax memory is almost full. Fax memory is full. Print or remove received fax Job Too many faxes are queued to be sent. Wait or remove queued job. Too many faxes are received. Print or remove job |
| Description: | Cannot execute the Fax function. |
| Causes: | There is not enough fax memory. |
| Remedy: | 1. “Fax memory is almost full.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. 2. “Fax memory is full. Print or remove receive fax job.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. 3. “Too many faxes are queued to be sent. Wait or remove queued job.” message case : 1) Check the delayed Fax job. (Reserved delay send job) 2) If the number of reserved send jobs is reached Max Job Count, reservation of send job is denied. 3) So, remove the delayed job . (Fax mode > Menu > Fax Feature > Cancel job) 4. “Too many faxes are received. Print or remove job.” message case : 1) Check the printing condition of machine. (Toner or Paper of tray) 2) Even though the printing condition of machine is normal, if this message is displaying, check the Secure Receive option. (Fax mode > Menu > Fax Feature > Secure Receive > Off) 3) Even though the option of Secure Receive is off, if this message is displaying, remove the job using the STOP button. |
| Error code: | 21-002 |
| Display: | Paper Empty in tray1 Paper is empty in tray1. Load paper |
| Description: | There is the paper in tray1 but error message is displayed. |
| Causes: | 1. Tray1 empty sensor harness is not connected properly. . 2. Empty Sensor is defective. |
| Remedy: | 1. Check the paper empty sensor connector. Reconnect it. 2. Check the paper empty sensor. If it is defective, replace it. 3. Check if the actuator is broken. |
| Error code: | 21-003 |
| Display: | Tray 1 cassette is pulled out. Insert it properly |
| Description: | Tray1 cassette is inserted in machine but error message is displayed. |
| Causes: | 1. The connector of the Tray1 Home Position Sensor is not connected properly. 2. Tray1 Home Position Sensor is defective. |
| Remedy: | 1. Reinstall the tray1 cassette. 2. Reconnect the / Feed sensor harness. 6p Feed/Tray empty 3.Check the CST Draw connector. Reconnect it. |
| Error code: | 21-010 |
| Display: | Paper is empty in MP tray. Load paper |
| Description: | There is the paper in MP tray but error message is displayed. |
| Causes: | 1. MP Paper Empty Sensor harness is not connected properly. 2. MP Paper Empty Sensor is defective. |
| Remedy: | 1. Check the MP paper empty sensor connector. Reconnect it. 2. Check the MP paper empty sensor. If it is defective, replace it. 3. Check if the MP Empty actuator is broken. |
| Error code: | 21-018 |
| Display: | Paper Empty in tray2 Paper is empty in tray2. Load paper |
| Description: | There is the paper in tray2 but error message is displayed. |
| Causes: | 1. Tray2 empty sensor harness is not connected properly. . 2. Empty Sensor is defective. |
| Remedy: | 1. Check the paper Tray2 empty sensor connector. Reconnect it. 2. Check the paper Tray2 empty sensor. If it is defective, replace it. 3. Check if the Tray2 actuator is broken. |
| Error code: | 21-019 |
| Display: | Tray2 cassette is pulled out. Insert it properly |
| Description: | Tray2 cassette is inserted in machine but error message is displayed. |
| Causes: | 1. The connector of the Tray2 Home Position Sensor is not connected properly. 2. Tray2 Home Position Sensor is defective. |
| Remedy: | 1. Reinstall the tray2 cassette. 2. Check the Tray2 Open micro sensor connector. Reconnect it. 3. Check the Tray2 Open micro sensor. If it is defective, replace it. |
| Error code: | 28-001, 28-002, 28-003 |
| Display: | Transfer belt is not installed. Install it. Transfer belt is not compatible for this machine. Check user’s guide. |
| Description: | The red LED is turning on and the machine does not operate. |
| Causes: | The transfer belt unit is installed in the machine but the machine could not read the information from the CRUM. CRUM information is different from machine. |
| Remedy: | 1.Check if transfer belt unit is properly installed. 2. Check CRUM PBA connector pins. Replace the CRUM PBA with normal thing and test it. If the CRUM PBA is defective, replace the transfer belt unit or CRUM PBA. 3. Check if the Transfer Belt CRUM Harness is defective and check that the connector is properly plugged into the Engine Board. 4. Replace the Main Board with a known good one and test it. If it works replace Main Board. |
