Ricoh MP9002
Рейтинг
Модули
DRIVE SECTION 3
Exterior 4
EXTERIOR 1
VERTICAL TRANSPORT
Paper feed unit 1
Drive Section 1
PAPER EXIT SECTION 2
FUSING UNIT 2
DUPLEX UNIT 5
ELECTRICAL SECTION 6
PAPER EXIT SECTION 3
ELECTRICAL SECTION 3
DUPLEX UNIT 2
ELECTRICAL SECTION 5
SADF 2
OPERATION PANEL
OPTICS SECTION 3
ELECTRICAL SECTION 7
PAPER EXIT SECTION 1
Waste Toner Drive
DUPLEX UNIT 4
TANDEM TRAY 1
ELECTRICAL SECTION 1
TANDEM TRAY 3
EXTERIOR 3
SADF 110
PCU 1
Exterior 5
PCU 2
SADF 3
TONER SUPPLY UNIT
FRAME SECTION 2
TANDEM TRAY 2
OPTICS SECTION 2
DUPLEX UNIT 3
ELECTRICAL SECTION 8
SADF 8
ELECTRICAL SECTION 9
ELECTRICAL SECTION 4
PAPER REGISTRATION 3
SADF 4
SADF 7
DEVELOPMENT UNIT 1
SADF 9
BY-PASS FEED TRAY
Fusing Unit 6
DUPLEX UNIT 1
PAPER REGISTRATION 1
Fusing Unit 4
Charge Unit
LASER UNIT
TRANSFER BELT UNIT 2
FRAME SECTION 1
OPTICS SECTION 4
EXTERIOR 2
PCU 3
TONER HOPPER SECTION
SADF 5
SADF 1
TRANSFER BELT UNIT 1
DRIVE SECTION 2
Frame Section 4
FUSING UNIT 1
UNIVERSAL TRAY
ELECTRICAL SECTION 2
DEVELOPMENT UNIT 2
Fusing Unit 5
OPTICS SECTION 1
PAPER FEED UNIT 2
SADF 10
FUSING UNIT 3
SADF 6
Frame Section 5
Frame Section 3
PAPER REGISTRATION 2
Детали OPTICS SECTION 1
| Деталь: | Joint: Pulley: Frame: 43T |
| Парткод: | D131 6751 |
| Деталь: | Pulley: Tensioner: DIA15 |
| Парткод: | D131 6764 |
| Деталь: | Synchronous Belt: Coupling: 360 |
| Парткод: | D131 6765 |
| Деталь: | Synchronous Belt: Coupling: 278 |
| Парткод: | D131 6757 |
| Деталь: | Decal: Paper Tray: Design Sketch: Multi-language |
| Парткод: | AA00 3221 |
| Деталь: | Decal: Paper Tray: Design Sketch: Multi-language: ABS |
| Парткод: | AA00 3224 |
| Деталь: | Arm: Stopper: Paper Tray: Peen |
| Парткод: | D062 6435 |
| Деталь: | Grip: Paper Tray |
| Парткод: | D131 6627 |
| Деталь: | Cover: Paper Tray: Short |
| Парткод: | D131 6633 |
| Деталь: | Cover: Paper Tray: Long |
| Парткод: | D131 6632 |
| Деталь: | Torsion Spring: Grip: Paper Tray |
| Парткод: | D062 6449 |
| Деталь: | Arm: Grip: Paper Tray: Right |
| Парткод: | D062 6447 |
| Деталь: | Arm: Grip: Paper Tray: Left: Peen |
| Парткод: | D062 6442 |
| Деталь: | Shaft: Grip: Paper Tray |
| Парткод: | D062 6441 |
| Деталь: | Roller: Stopper: Paper Tray |
| Парткод: | D062 6438 |
| Деталь: | Link: Stopper: Paper Tray |
| Парткод: | D062 6434 |
| Деталь: | Torsion Spring: Stopper: Paper Tray |
| Парткод: | D062 6439 |
| Деталь: | Shaft: Stopper: Paper Tray |
| Парткод: | D062 6433 |
| Деталь: | Door: Front |
| Парткод: | D131 1301 |
| Деталь: | Hinge: Upper |
| Парткод: | B0981342 |
| Деталь: | Hinge: Lower: Assy |
| Парткод: | B247 1223 |
| Деталь: | Decal: Misfeed Removal: Main |
| Парткод: | D131 1361 |
| Деталь: | Decal: Toner: Supply |
| Парткод: | D131 1364 |
| Деталь: | Door Switch Bracket |
| Парткод: | A294 1292 |
| Деталь: | Door Catch |
| Парткод: | B132 1526 |
| Деталь: | Cover: Main Switch |
| Парткод: | D131 1325 |
| Деталь: | Sheet: Application: Multi-language: Blank |
| Парткод: | D129 1568 |
| Деталь: | Lever: Guide Plate: Vertical Transport |
| Парткод: | D131 1323 |
| Деталь: | Micro Switchlever |
| Парткод: | B065 1326 |
| Деталь: | Cloth - DF Exposure Glass |
| Парткод: | B065 1374 |
| Деталь: | Decal: Model Name Plate: D131: EXP |
| Парткод: | D131 7041 |
| Деталь: | Decal: Model Name Plate: D131: EXP: SP |
| Парткод: | D131 7042 |
| Деталь: | Decal: Model Name Plate: D131: LAN |
| Парткод: | D131 7044 |
| Деталь: | Decal: Model Name Plate: D131: GES |
| Парткод: | D131 7047 |
| Деталь: | Decal: Model Name Plate: D132 |
| Парткод: | D132 7041 |
| Деталь: | Decal: Model Name Plate: D132: EXP: SP |
| Парткод: | D132 7042 |
| Деталь: | Decal: Model Name Plate: D132: LAN |
| Парткод: | D132 7044 |
| Деталь: | Decal: Model Name Plate: D132: GES |
| Парткод: | D132 7047 |
| Деталь: | Decal: Model Name Plate: D133: EXP |
| Парткод: | D133 7041 |
| Деталь: | Decal: Model Name Plate: D133: EXP: SP |
| Парткод: | D133 7042 |
| Деталь: | Decal: Model Name Plate: D133: LAN |
| Парткод: | D133 7044 |
| Деталь: | Decal: Model Name Plate: D133: GES |
| Парткод: | D133 7047 |
| Деталь: | Harness: BCU: MKB |
| Парткод: | D131 5511 |
| Деталь: | Plate: Logotype: RIC |
| Парткод: | AA00 1564 |
| Деталь: | Plate: Logotype: LAN |
| Парткод: | AA00 1565 |
| Деталь: | Plate: Logotype: GES |
| Парткод: | AA00 1567 |
| Деталь: | Accessory: Logo: AA: Assy |
| Парткод: | D131 8459 |
| Деталь: | Decal: Caution: Original: EXP |
| Парткод: | D131 1379 |
| Деталь: | Decal: Main Switch: Dom/Na |
| Парткод: | D131 1369 |
| Деталь: | Inner Cover: Main Switch |
| Парткод: | D131 1315 |
| Деталь: | Inner Cover: Fusing Unit: Upper |
| Парткод: | D131 1316 |
| Деталь: | Decal: Lever: Release: Transfer |
| Парткод: | D131 1365 |
| Деталь: | Inner Cover: Around The Photoconductor |
| Парткод: | D131 1313 |
| Деталь: | Fan: Mm60 |
| Парткод: | AX64 0203 |
| Деталь: | PCU Duct Inner Cover |
| Парткод: | B065 1318 |
| Деталь: | Knob: Duplex |
| Парткод: | D131 2552 |
| Деталь: | Decal: Total Counter |
| Парткод: | D131 1362 |
| Деталь: | Inner Cover: Right Lower |
| Парткод: | D131 1312 |
| Деталь: | Decal: Inner Cover: Right Lower |
| Парткод: | D131 1363 |
| Деталь: | Decal: Size Indication: Multi-language: C5 |
| Парткод: | D131 8510 |
| Деталь: | Inner Cover: Development Sub-unit: Right: Assy |
| Парткод: | D131 3290 |
| Деталь: | Nut - M3.6 |
| Парткод: | AA10 0006 |
| Деталь: | Inner cover |
| Парткод: | B247 6184 |
| Деталь: | Stand: Auxiliary: Assy |
| Парткод: | B247 8701 |
| Деталь: | Bracket: Stand: Auxiliary |
| Парткод: | G126 8705 |
| Деталь: | Flange: Nut: M12 |
| Парткод: | B247 8710 |
| Деталь: | Seal: Door: Right Upper |
| Парткод: | D131 1320 |
| Деталь: | Adjusting Pin: Auxiliary |
| Парткод: | B247 8706 |
| Деталь: | Holder: Stand |
| Парткод: | B132 1226 |
| Деталь: | Sheet: Application: Multi-language: NA |
| Парткод: | D129 1566 |
| Деталь: | Sheet: Application: Multi-language: EU |
| Парткод: | D129 1567 |
| Деталь: | Holder: Exposure Glass: Ig: Assy |
| Парткод: | D144 1396 |
| Деталь: | Decal: Caution Chart: Paper Set Direction |
| Парткод: | AA00 3048 |
| Деталь: | Paper Bank Connecting Guide Plate |
| Парткод: | B140 6361 |
| Деталь: | Stopper: Guide Plate: Vertical Transport |
| Парткод: | D131 6456 |
| Деталь: | Compression Spring: Transport Roller: 12.5N |
| Парткод: | AA06 3480 |
| Деталь: | Harness - Joint Unit |
| Парткод: | B132 7583 |
| Деталь: | Stepper Motor: Paper Feed Unit: Assy |
| Парткод: | B132 6655 |
| Деталь: | Bracket: Dc Stepper Motor: Joint Unit |
| Парткод: | D131 6686 |
| Деталь: | Transport Unit: Vertical Transport: Assy |
| Парткод: | D131 6420 |
| Деталь: | SPRING |
| Парткод: | AA06 3878 |
| Деталь: | Cover: Release: Vertical Transport |
| Парткод: | B247 6430 |
| Деталь: | Decal: Grip: Transport Sub-unit: Open And Close |
| Парткод: | D131 6429 |
| Деталь: | Lever: Release: Vertical Transport |
| Парткод: | B247 6426 |
| Деталь: | Button: Release: Vertical Transport |
| Парткод: | D131 6428 |
| Деталь: | Release Lever - Vertical Transport |
| Парткод: | B065 6427 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3560 |
| Деталь: | Side Plate: Front: Vertical Transport |
| Парткод: | D131 6452 |
| Деталь: | Side Plate: Rear: Vertical Transport |
| Парткод: | D131 6451 |
| Деталь: | Transport Pressure Plate |
| Парткод: | B065 6402 |
| Деталь: | Synchronous Belt: Joint Unit: 92 |
| Парткод: | D131 6689 |
| Деталь: | Stepped Screw - M5 |
| Парткод: | B247 6982 |
| Деталь: | Vertical Driven Roller |
| Парткод: | AF02 0295 |
| Деталь: | BUSHING - M4 |
| Парткод: | AA08 0241 |
| Деталь: | Spring - 10mm |
| Парткод: | AA06 3487 |
| Деталь: | Micro Switch Sheet |
| Парткод: | A096 5528 |
| Деталь: | Micro Switchbracket |
| Парткод: | B065 6122 |
| Деталь: | SPRING |
| Парткод: | A423 4433 |
| Деталь: | Shoulder Screw - M2.5 |
| Парткод: | AA14 3809 |
| Деталь: | Bracket: Fix: Large Capacity Trat |
| Парткод: | B065 6078 |
| Деталь: | Pulley: Idler: 30T/24Z |
| Парткод: | AB01 7690 |
| Деталь: | Flange: Pulley: Drive: Joint Unit |
| Парткод: | D131 6685 |
| Деталь: | Gear: Idler: 24Z30T |
| Парткод: | D131 6684 |
| Деталь: | Timing Belt - B60S2M112 |
| Парткод: | AA04 3974 |
| Деталь: | Transport Roller: Drive: Grip |
| Парткод: | AF02 0726 |
| Деталь: | Gear - 35Z |
| Парткод: | AB01 1466 |
| Деталь: | Shaft: Reverse: Joint Unit |
| Парткод: | D131 6692 |
| Деталь: | Gear: Grip: Joint Unit |
| Парткод: | D131 6691 |
| Деталь: | Bracket: Grip: Shaft: Joint Unit |
| Парткод: | D131 6683 |
| Деталь: | Joint: Timing Pulley: Reverse: T30 |
| Парткод: | D131 6664 |
| Деталь: | Compression Spring: Joint: 2.0N |
| Парткод: | D131 6693 |
| Деталь: | Joint: Slider: Grip |
| Парткод: | D131 6663 |
| Деталь: | Guide Plate: Joint Unit: Assy |
| Парткод: | D131 6681 |
| Деталь: | Paper Feed Unit: Bank: M: Assy (for Trays 1 |
| Парткод: | D131 6200 |
| Деталь: | Paper Feed Unit: Bank: V: Assy (for Tray 3) |
| Парткод: | D131 6201 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Paper Feed Roller: Pickup |
| Парткод: | AF03 0081 |
| Деталь: | Paper Feed Roller: Feed |
| Парткод: | AF03 1082 |
| Деталь: | Pick-up Gear Cover |
| Парткод: | B065 6350 |
| Деталь: | Idler Gear |
| Парткод: | AB01 1465 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | Pick-up Arm |
| Парткод: | B065 6357 |
| Деталь: | SPRING |
| Парткод: | AA06 0898 |
| Деталь: | Shaft: Feed Roller |
| Парткод: | D062 6356 |
| Деталь: | Feed Lever |
| Парткод: | B065 6445 |
| Деталь: | SPRING |
| Парткод: | AA06 0897 |
| Деталь: | Paper Feed Sensor Bracket |
| Парткод: | B065 6358 |
| Деталь: | Paper Feed Sensor (for Trays 1 & 2) |
| Парткод: | AW01 0107 |
| Деталь: | Photo Reflection Sensor:PS122TL8-A (for Tra |
| Парткод: | AW01 0149 |
| Деталь: | Feed Stay (for Trays 1 & 2) |
| Парткод: | B065 6364 |
| Деталь: | Stay: Feed: Assy (for Tray 3) |
| Парткод: | D081 6664 |
| Деталь: | Coil Spring: Pressure Release: Pickup |
| Парткод: | AA06 1076 |
| Деталь: | DC Solenoid: Pickup: Assy |
| Парткод: | B132 6659 |
| Деталь: | Gear: Feed: 21Z |
| Парткод: | D131 6665 |
| Деталь: | Paper End Sensor Bracket |
| Парткод: | B065 6345 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0160 |
| Деталь: | Harness: Paper Feed Unit: Lower: Assy |
| Парткод: | B247 6487 |
| Деталь: | Paper Feed Guide Plate (for Trays 1 & 2) |
| Парткод: | B140 6339 |
| Деталь: | Guide Plate: Feed (for Tray 3) |
| Парткод: | D081 6639 |
| Деталь: | Transport Roller: Drive: Grip |
| Парткод: | AF02 0726 |
| Деталь: | Gear - 35Z |
| Парткод: | AB01 1466 |
| Деталь: | Harness: Paper Feed Unit: Upper: Assy |
| Парткод: | B247 6488 |
| Деталь: | Feed Gear Cover |
| Парткод: | B065 6353 |
| Деталь: | Driven Pressure Lever |
| Парткод: | B065 6457 |
| Деталь: | SPRING |
| Парткод: | AA06 0896 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3718 |
| Деталь: | Ground Plate: Reverse: Paper Feed Unit |
| Парткод: | B140 6377 |
| Деталь: | Paper Feed Unit Stay (for Trays 1 & 2) |
| Парткод: | B065 6375 |
| Деталь: | Bracket: Connector: 2 (for Tray 3) |
| Парткод: | D081 6675 |
| Деталь: | Heat Sink Base |
| Парткод: | B065 6334 |
| Деталь: | Heat Sink Spring |
| Парткод: | AA06 3889 |
| Деталь: | HEAT SINK |
| Парткод: | B065 6337 |
| Деталь: | Heat Sink Sheet |
| Парткод: | B065 6338 |
| Деталь: | Bracket: Dc Stepper Motor: Mm56 |
| Парткод: | D062 2752 |
| Деталь: | LCT Cable Bracket |
| Парткод: | B065 5808 |
| Деталь: | Grid Receptacle Terminal |
| Парткод: | B065 2481 |
| Деталь: | Charge Receptacle Terminal |
| Парткод: | B065 2482 |
| Деталь: | Rear Receptacle |
| Парткод: | A294 2051 |
| Деталь: | Receptacle Pin |
| Парткод: | A294 2052 |
| Деталь: | Electrode Plate: Drum Shaft: Assy |
| Парткод: | B247 1154 |
| Деталь: | ELECTRODE PLATE |
| Парткод: | B065 3262 |
| Деталь: | BRACKET |
| Парткод: | B065 1137 |
| Деталь: | Drum Shaft: Assy |
| Парткод: | D062 1140 |
| Деталь: | PARTITION PLATE |
| Парткод: | B065 1134 |
| Деталь: | Fly Wheel |
| Парткод: | A294 1119 |
| Деталь: | Boss: Gear |
| Парткод: | D062 1145 |
| Деталь: | Gear - 156Z |
| Парткод: | AB01 2315 |
| Деталь: | Gear - Z40 |
| Парткод: | AB01 1482 |
| Деталь: | Gear: Z31 |
| Парткод: | AB01 1507 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3948 |
| Деталь: | Gear -38/z59 |
| Парткод: | AB01 7640 |
| Деталь: | Gear: Z38/Z67 |
| Парткод: | AB01 7760 |
| Деталь: | TENSION SPRING |
| Парткод: | AA06 0792 |
| Деталь: | Bracket: Tightener: Assy |
| Парткод: | B247 1122 |
| Деталь: | Brushless Motor DC24V/25W |
| Парткод: | B247 1110 |
| Деталь: | Guide Plate: Positioning Pin: Duplex: Assy |
| Парткод: | B247 1084 |
| Деталь: | Pulley - 28Z |
| Парткод: | AB03 0458 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3945 |
| Деталь: | Ring - 55 |
| Парткод: | A229 1135 |
| Деталь: | Pulley - 74Z |
| Парткод: | AB03 0724 |
| Деталь: | Transfer Drive Bracket |
| Парткод: | B065 1147 |
| Деталь: | Joint: Transfer Drive: Assy |
| Парткод: | B247 1149 |
| Деталь: | Spacer - 1x8x12 |
| Парткод: | AA13 2025 |
| Деталь: | SPRING |
| Парткод: | AA06 3654 |
| Деталь: | JOINT |
| Парткод: | B065 1131 |
| Деталь: | Reverse Roller: Drive |
| Парткод: | B247 4463 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2117 |
| Деталь: | Gear - 19Z |
| Парткод: | AB01 2028 |
| Деталь: | Reverse Guide Plate - Right |
| Парткод: | A229 4479 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | AA04 0056 |
| Деталь: | Exit Roller Holder |
| Парткод: | A229 4482 |
| Деталь: | Reverse Guide Plate |
| Парткод: | A229 4477 |
| Деталь: | Exit Gate Pawl |
| Парткод: | B065 4413 |
| Деталь: | Exitdecura Roller |
| Парткод: | AF02 0579 |
| Деталь: | Roller: Decura: Exit |
| Парткод: | B247 4439 |
| Деталь: | Entrancedecura Roller |
| Парткод: | AF02 0578 |
| Деталь: | Roller: Decura: Entrance |
| Парткод: | B247 4438 |
| Деталь: | Screw: A |
| Парткод: | AA14 3807 |
| Деталь: | Lower Entrance Guide Plate |
| Парткод: | B065 4254 |
| Деталь: | Timing Pulley - 18Z |
| Парткод: | AB03 0578 |
| Деталь: | Exit Drum Stay |
| Парткод: | B065 4441 |
| Деталь: | SPRING |
| Парткод: | AA06 0902 |
| Деталь: | DC Solenoid: Gate Pawl: Assy |
| Парткод: | D066 4415 |
| Деталь: | Nylon Rivet |
| Парткод: | A048 2838 |
| Деталь: | Gear - IDLER WORM GEAR |
| Парткод: | B140 4336 |
| Деталь: | Front Drive Bracket Assy |
| Парткод: | B140 4329 |
| Деталь: | Gear - 21/33Z |
| Парткод: | B140 4322 |
| Деталь: | Gear - 21/35Z |
| Парткод: | B140 4306 |
| Деталь: | Gear - 21/35Z |
| Парткод: | B140 4304 |
| Деталь: | Pressure Tension Spring |
| Парткод: | B140 4300 |
| Деталь: | Gear: Swivle: Assy |
| Парткод: | B247 4317 |
| Деталь: | Heat Insulating Plate Bracket |
| Парткод: | B140 4474 |
| Деталь: | Stepper Motor DC3.4V |
| Парткод: | B247 4324 |
| Деталь: | Drive Bracket Assy |
| Парткод: | B140 4325 |
| Деталь: | Fusing Unit: NA: Assy (D131/D132) NA |
| Парткод: | D131 4584 |
| Деталь: | Fusing Unit: EU: Assy (D131/D132) EU |
| Парткод: | D131 4587 |
| Деталь: | Fusing Unit: D133: Assy (D133) NA/EU |
| Парткод: | D133 4001 |
| Деталь: | Stripper Pawls: Open and Close: Assy (D131/D132) |
| Парткод: | D131 4080 |
| Деталь: | Stripper Pawls: Open and Close: Assy (D133) |
| Парткод: | D133 4080 |
| Деталь: | SLIDER COVER |
| Парткод: | B065 4398 |
| Деталь: | Development Cover Screw |
| Парткод: | AA14 3810 |
| Деталь: | Stripper Pawl Spring |
| Парткод: | AA06 0539 |
| Деталь: | Slider Spring |
| Парткод: | AA06 0916 |
| Деталь: | Screw: Slider |
| Парткод: | B247 4247 |
| Деталь: | Release Slider |
| Парткод: | B065 4397 |
| Деталь: | Front Lock Pawl |
| Парткод: | B065 4188 |
| Деталь: | Rear Lock Pawl |
| Парткод: | B065 4189 |
| Деталь: | Grip: Stripper Pawls: Printing |
| Парткод: | D131 4184 |
| Деталь: | BUSHING |
| Парткод: | AA08 0274 |
| Деталь: | Bracket: Guide Plate: Fusing Exit: Upper: Assy (D131/D132) |
| Парткод: | B140 4240 |
| Деталь: | Bracket: Guide Plate: Fusing Exit: Upper: Assy (D133) |
| Парткод: | D066 4291 |
| Деталь: | Fusing Exit Roller Holder (D131/D132) |
| Парткод: | B140 4141 |
| Деталь: | Exit Roller Holder (D133) |
| Парткод: | A096 4319 |
| Деталь: | Roller: Fusing Exit: Upper |
| Парткод: | AF04 0629 |
| Деталь: | Stripper Pawls |
| Парткод: | AE04 4060 |
| Деталь: | Fusing Cover: Upper: Assy (D131/D132) |
| Парткод: | D131 4117 |
| Деталь: | Fusing Cover: Upper: D133: Assy (D133) |
| Парткод: | D133 4117 |
| Деталь: | Bracket: Cover: Connector: Assy |
| Парткод: | B140 4113 |
| Деталь: | Grip: Fusing Unit: Front: Assy |
| Парткод: | D062 4174 |
| Деталь: | Upper Fusing Exit Guide Plate (D131/D132) |
| Парткод: | B140 4234 |
| Деталь: | Fusing Exit Guide Plate (D133) |
| Парткод: | B065 4390 |
| Деталь: | Side Plate Cover |
| Парткод: | B065 4138 |
| Деталь: | Lower Fusing Cover (D131/D132) |
| Парткод: | B140 4203 |
| Деталь: | Lower Fusing Cover (D133) |
| Парткод: | B065 4116 |
| Деталь: | Lower Fusing Entrance Plate - 240V (D133) |
| Парткод: | B065 4135 |
| Деталь: | Fusing Entrance Guide Plate: NA: Assy (D131/D132 NA) |
| Парткод: | D062 4131 |
| Деталь: | Fusing Entrance Guide Plate: Lower: Assy (D131/D132 EU) |
| Парткод: | D062 4135 |
| Деталь: | Shaft: Release: Stripper Pawls |
| Парткод: | B247 4083 |
| Деталь: | SPRING |
| Парткод: | AA06 6352 |
| Деталь: | Duplex Gate Pawl |
| Парткод: | B065 4733 |
| Деталь: | Gate Pawl Cushion |
| Парткод: | B065 4738 |
| Деталь: | Guide Plate: Duplex: Lower |
| Парткод: | D131 4860 |
| Деталь: | SPACER |
| Парткод: | B065 4865 |
| Деталь: | Belt Holder Fixing Plate |
| Парткод: | A294 4723 |
| Деталь: | Timing Belt: 40S2M810 |
| Парткод: | AA04 3435 |
| Деталь: | Front Jogger Fence Slider |
| Парткод: | B065 4692 |
| Деталь: | Rear Jogger Fence Slider |
| Парткод: | B065 4693 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Relay Paper Feed Harness |
| Парткод: | B065 2762 |
| Деталь: | Jogger H.P. Sensor Bracket |
| Парткод: | B065 4699 |
| Деталь: | CUSHION |
| Парткод: | A294 4669 |
| Деталь: | Gear - 30Z/45Z |
| Парткод: | AB01 7615 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0148 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0149 |
| Деталь: | Exit Reverse Sensor Bracket |
| Парткод: | B065 4715 |
| Деталь: | Upper Transport Guide Plate Assy |
| Парткод: | B140 4710 |
| Деталь: | Duplex Guide |
| Парткод: | A096 4595 |
| Деталь: | Spring: Gate Pawl: Duplex |
| Парткод: | D131 4734 |
| Деталь: | DC Solenoid: Gate Pawl: Assy |
| Парткод: | D131 4740 |
| Деталь: | Support Bracket |
| Парткод: | B065 4619 |
| Деталь: | Drawer Bracket - 32P |
| Парткод: | B065 4790 |
| Деталь: | Drawer Bracket - 12P |
| Парткод: | B065 4791 |
| Деталь: | Harness: Duplex Unit: 32Pin |
| Парткод: | D131 4980 |
| Деталь: | Harness: Duplex Unit: 12Pin |
| Парткод: | D131 4983 |
| Деталь: | SPRING |
| Парткод: | AA06 2318 |
| Деталь: | Jogger Pulley |
| Парткод: | AB03 0732 |
| Деталь: | Bracket: Jogger: Assy |
| Парткод: | B247 4820 |
| Деталь: | Pin: Guide Plate: Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Cushion: Gate Pawl: Switchback |
| Парткод: | B234 4846 |
| Деталь: | DC Solenoid: Coupling: Assy |
| Парткод: | B132 6762 |
| Деталь: | DC Solenoid: Lock: Assy |
| Парткод: | D059 6765 |
| Деталь: | Bracket: Arm: Assy |
| Парткод: | B132 6726 |
| Деталь: | Spacer - 6mm |
| Парткод: | AA13 2203 |
| Деталь: | LOCK ARM |
| Парткод: | B065 6769 |
| Деталь: | Lock Spring - Large |
| Парткод: | B247 6753 |
| Деталь: | Lock Spring - Small |
| Парткод: | B247 6754 |
| Деталь: | Bracket: Lift Motor: Tandem LCT |
| Парткод: | D066 6738 |
| Деталь: | DC Motor 24V 19.6W |
| Парткод: | B132 6760 |
| Деталь: | DC Motor: Rising Tray: Assy |
| Парткод: | AX04 0254 |
| Деталь: | Right Connecting Bracket |
| Парткод: | B065 6767 |
| Деталь: | Bracket: Connector: Left |
| Парткод: | B132 6763 |
| Деталь: | Harness: Bank: Rear: Three Way |
| Парткод: | D066 5700 |
| Деталь: | Harness: Bank: Rear: Three Way: Assy |
| Парткод: | D066 5709 |
| Деталь: | SPRING |
| Парткод: | AA06 3880 |
| Деталь: | Connector Guide Pin |
| Парткод: | AA14 3797 |
| Деталь: | Paper Tray Stopper |
| Парткод: | D059 6172 |
| Деталь: | Compression Spring: Drawer |
| Парткод: | AA06 3901 |
| Деталь: | Stay: Exit: Left |
| Парткод: | D131 4252 |
| Деталь: | Exit Roller: Drive: Exit |
| Парткод: | B247 4460 |
| Деталь: | Timing Pulley - 27Z |
| Парткод: | AB03 0579 |
| Деталь: | Shift Clutch |
| Парткод: | A470 1703 |
| Деталь: | Spring - Lower Exit Roller |
| Парткод: | B247 4456 |
| Деталь: | Washer: DIA6.3xdia18x1 |
| Парткод: | B247 4487 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3290 |
| Деталь: | Timing Belt: S2M: 40X426 |
| Парткод: | AA04 3315 |
| Деталь: | Eft Reverse Guide Plate Assy |
| Парткод: | B140 4308 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | AA04 0056 |
| Деталь: | PRESSURE ARM |
| Парткод: | A229 4467 |
| Деталь: | Exit Arm Pad |
| Парткод: | B065 4424 |
| Деталь: | Shaft: Pressure: Guide Plate: Assy |
| Парткод: | B247 4421 |
| Деталь: | Guide Plate Lever |
| Парткод: | B065 4422 |
| Деталь: | Bracket: Harness: Plate: Front (D133) |
| Парткод: | B065 4460 |
| Деталь: | Side Plate: Front: Exit |
| Парткод: | B247 4429 |
| Деталь: | Side Plate: Front: Exit: Assy (D133) |
| Парткод: | G148 4429 |
| Деталь: | Side Plate: Rear: Exit |
| Парткод: | B247 4433 |
| Деталь: | Side Plate: Rear: Exit: Assy (D133) |
| Парткод: | G148 4433 |
| Деталь: | Rear Harness Bracket |
| Парткод: | B065 4459 |
| Деталь: | Right Exit Stay |
| Парткод: | B065 4249 |
| Деталь: | Stay: Exit: Right: Assy |
| Парткод: | D131 4249 |
| Деталь: | GEAR |
| Парткод: | AB01 9200 |
| Деталь: | Idle Pulley - 11mm |
| Парткод: | B065 4317 |
| Деталь: | Tightener: Exit: Assy |
| Парткод: | B247 4315 |
| Деталь: | TENSION SPRING |
| Парткод: | B247 4454 |
| Деталь: | Exit Drawer Bracket |
| Парткод: | B065 4458 |
| Деталь: | Exit Drawer Bracket |
| Парткод: | B140 4458 |
| Деталь: | EXIT HARNESS |
| Парткод: | B065 4497 |
| Деталь: | Harness - Paper Exit Unit Drawer |
| Парткод: | B140 4497 |
| Деталь: | LOCK SPRING |
| Парткод: | B247 4403 |
| Деталь: | Bracket: Swivel: Assy |
| Парткод: | B247 4400 |
| Деталь: | GEAR |
| Парткод: | AB01 2031 |
| Деталь: | Exit Gear |
| Парткод: | AB01 9197 |
| Деталь: | Fan bracket |
| Парткод: | B065 1183 |
| Деталь: | Duct Seal - PCU |
| Парткод: | AA15 3154 |
| Деталь: | Entrance PCU Duct |
| Парткод: | B065 1184 |
| Деталь: | Fan Motor DC24V/1.92W |
| Парткод: | AX64 0183 |
| Деталь: | Duct: PCU: Assy |
| Парткод: | D062 1180 |
| Деталь: | Power Pack - Development |
| Парткод: | AZ30 0057 |
| Деталь: | Bracket: Power Pack: Development |
| Парткод: | G126 5892 |
| Деталь: | Connector Guide Pin |
| Парткод: | AA14 3797 |
| Деталь: | Main Switch Harness Guide |
| Парткод: | B065 5818 |
| Деталь: | Harness: AC Power Supply: Main: NA |
| Парткод: | D131 5615 |
| Деталь: | Harness: AC Power Supply: Main: EU |
| Парткод: | D131 5617 |
| Деталь: | Harness: AC Power Supply: Main: EXP: 90CPM |
| Парткод: | D133 5616 |
| Деталь: | Slide Rail Cover |
| Парткод: | B065 5817 |
| Деталь: | SPRING |
| Парткод: | AA06 3880 |
| Деталь: | Hinge Bracket - Lower |
| Парткод: | B247 5712 |
| Деталь: | Harness: DRB: Duplex |
| Парткод: | D062 5422 |
| Деталь: | Harness: Machine or Copier: Duplex: Exit |
| Парткод: | D062 5418 |
| Деталь: | Harness: Main: Duplex: Exit: 90 |
| Парткод: | D066 5418 |
| Деталь: | Harness: CNB: Fin |
| Парткод: | D062 5445 |
| Деталь: | Finisher Cable Bracket |
| Парткод: | B065 5807 |
| Деталь: | LEVER CAM |
| Парткод: | B065 4648 |
| Деталь: | Knob: Reverse Unit |
| Парткод: | D131 4866 |
| Деталь: | Shoulder Screw - Front Cover |
| Парткод: | AA14 3129 |
| Деталь: | SPRING |
| Парткод: | AA06 2318 |
| Деталь: | Invertor Lever |
| Парткод: | B065 4647 |
| Деталь: | Lower Entrance Guide Plate |
| Парткод: | A229 4623 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B247 4817 |
| Деталь: | Bushing - 4x5x7 |
| Парткод: | AA08 0034 |
| Деталь: | Roller: Driven: Duplex |
| Парткод: | B247 4624 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | Bushing - M8 |
| Парткод: | AA08 2116 |
| Деталь: | Front Side Plate |
| Парткод: | B065 4627 |
| Деталь: | Side Plate: Rear: Reverse Unit: Assy |
| Парткод: | B247 4620 |
| Деталь: | TENSION SPRING |
| Парткод: | B247 4816 |
| Деталь: | Reverse Roller: Entrance |
| Парткод: | B247 4818 |
| Деталь: | Gate Pawl: Reverse |
| Парткод: | B247 4645 |
| Деталь: | Front Gate Pawl |
| Парткод: | A293 4613 |
| Деталь: | Rear Gate Pawl |
| Парткод: | A293 4614 |
| Деталь: | SPACER |
| Парткод: | B247 4615 |
| Деталь: | Joint Holder |
| Парткод: | B065 4632 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B247 4815 |
| Деталь: | Drive Joint |
| Парткод: | A229 4740 |
| Деталь: | Sensor bracket |
| Парткод: | B065 4644 |
| Деталь: | Discharge Brush: Duplex |
| Парткод: | B247 4617 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0119 |
| Деталь: | Upper Entrance Guide Plate Assy |
| Парткод: | B140 4640 |
| Деталь: | Stopped Screw - M4x17 |
| Парткод: | AA14 3426 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Cover Temperature & Humidity Sensor |
| Парткод: | B110 3777 |
| Деталь: | Bottle Guide |
| Парткод: | B065 3695 |
| Деталь: | THERMISTOR |
| Парткод: | AW10 0107 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 1845 |
| Деталь: | PCB: pFB: Three Way |
| Парткод: | D131 5132 |
| Деталь: | Harness: Bank: Front: Three Way |
| Парткод: | D062 5701 |
| Деталь: | Harness: BCU: pFB: Connecting |
| Парткод: | D062 5703 |
| Деталь: | Harness: Dc Power Supply: pFB |
| Парткод: | D062 5502 |
| Деталь: | Fan Motor: Mm60: 25mm: DC24V 4.8W |
| Парткод: | AX64 0150 |
| Деталь: | Rail: Side Fence |
| Парткод: | D609 2367 |
| Деталь: | Side Fence: Original Table |
| Парткод: | D609 2362 |
| Деталь: | Side Fence Pad |
| Парткод: | A376 4599 |
| Деталь: | Feeler: Sensor: Original Sensor |
| Парткод: | D412 2357 |
| Деталь: | Base: Original Table: Assy |
| Парткод: | D609 2351 |
| Деталь: | CUSHION |
| Парткод: | B477 2263 |
| Деталь: | Base Cushion Sheet |
| Парткод: | B477 2264 |
| Деталь: | Decal: Base: Original |
| Парткод: | D609 4407 |
| Деталь: | Snap Ring |
| Парткод: | 52 062 686 |
| Деталь: | Photointerruptor: GP1A173LCS2F |
| Парткод: | AW02 0203 |
| Деталь: | Original Sensor Bracket |
| Парткод: | B477 2281 |
| Деталь: | Guide Plate: Original Table |
| Парткод: | D412 2282 |
| Деталь: | Bushing - 8x12x7 |
| Парткод: | AA08 2104 |
| Деталь: | Harness: Sensor: Base |
| Парткод: | D412 5920 |
| Деталь: | Base Lift Lever |
| Парткод: | B477 2323 |
| Деталь: | Shaft: Rise: Base |
| Парткод: | D412 2292 |
| Деталь: | Stopper: Original Table |
| Парткод: | B652 2392 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B652 2393 |
| Деталь: | Bracket: Stopper: Original Table |
| Парткод: | D412 2393 |
| Деталь: | Gear: Z47: M0.8 |
| Парткод: | D412 2345 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Shaft: Cleaner |
| Парткод: | AA14 3789 |
| Деталь: | Seal: Stay: Original Table |
| Парткод: | D609 2286 |
| Деталь: | Original Table: Face Front: Assy |
| Парткод: | D609 2371 |
| Деталь: | Decal: Set: Original Table |
| Парткод: | D609 4402 |
| Деталь: | Photo Reflection Sensor |
| Парткод: | AW01 0129 |
| Деталь: | Harness: Sensor: Original Table |
| Парткод: | D609 5430 |
| Деталь: | Original Table: Behind |
| Парткод: | D609 2382 |
| Деталь: | Operation Panel: M-C5: NA:Service Parts: Assy |
| Парткод: | D1321403 |
| Деталь: | Operation Panel: EU: Service Parts: AssyService Parts: Assy |
| Парткод: | D1321405 |
| Деталь: | Operation Panel: M-C5: AA: |
| Парткод: | D1321409 |
| Деталь: | Sheet: Journal: AA-C3: NA |
| Парткод: | D1291519 |
| Деталь: | Sheet: Logo |
| Парткод: | D120 1551 |
| Деталь: | Sheet: Logo: LAN |
| Парткод: | D120 1556 |
| Деталь: | Sheet: Logo: GES |
| Парткод: | D120 1557 |
| Деталь: | Cover: Upper: NA/AA |
| Парткод: | D129 1531 |
| Деталь: | Cover: Upper: EU/CHN/TWN |
| Парткод: | D129 1532 |
| Деталь: | Lens: Front |
| Парткод: | D129 1510 |
| Деталь: | Keytop: Left |
| Парткод: | D129 1509 |
| Деталь: | Keytop: Home |
| Парткод: | D129 1508 |
| Деталь: | Cable: FFC: OPL |
| Парткод: | D129 1431 |
| Деталь: | PCB: OP-L: Assy |
| Парткод: | D129 1459 |
| Деталь: | Shadeing Plate: Touch Panel |
| Парткод: | D129 1513 |
| Деталь: | Touch Panel: WVGA: MV |
| Парткод: | D129 1421 |
| Деталь: | LCD Spacer A |
| Парткод: | B238 1534 |
| Деталь: | LCD Spacer B |
| Парткод: | B2381535 |
| Деталь: | Cushion: Core |
| Парткод: | M0521553 |
| Деталь: | LCD: TFT: WVGA: LED: MV |
| Парткод: | D129 1420 |
| Деталь: | Cable: FFC: LCD |
| Парткод: | D129 1432 |
| Деталь: | Stopper: Core |
| Парткод: | D009 1511 |
| Деталь: | Keytop: Stop |
| Парткод: | D129 1503 |
| Деталь: | Keytop: Start |
| Парткод: | D129 1502 |
| Деталь: | Keytop: Reset Switch |
| Парткод: | D129 1506 |
| Деталь: | Keytop: Power Source |
| Парткод: | D129 1507 |
| Деталь: | Cable: FFC: OPR |
| Парткод: | D129 1430 |
| Деталь: | PCB: OP-R |
| Парткод: | D131 1480 |
| Деталь: | Sheet: Side: NA |
| Парткод: | D129 1525 |
| Деталь: | Bracket: LCDC: Assy |
| Парткод: | D129 1514 |
| Деталь: | Ground Plate: Operation Panel: Left |
| Парткод: | D131 1518 |
| Деталь: | Ground Plate: Operation Panel: Right |
| Парткод: | D131 1519 |
| Деталь: | PCB: LCDC: NA: FT |
| Парткод: | D131 1461 |
| Деталь: | PCB: LCDC: EU: FT |
| Парткод: | D131 1462 |
| Деталь: | Cover: Operation Panel |
| Парткод: | D131 1351 |
| Деталь: | Keytop: 10key |
| Парткод: | D129 1504 |
| Деталь: | Keytop: 10key: NA |
| Парткод: | D129 1533 |
| Деталь: | Keytop: 10key: EU |
| Парткод: | D129 1534 |
| Деталь: | Cable: USB: 2640 |
| Парткод: | D131 5306 |
| Деталь: | Harness: LVDS: Cable |
| Парткод: | D131 5307 |
| Деталь: | Carriage: No.1 |
| Парткод: | D0141751 |
| Деталь: | Carriage: No.2: Assy |
| Парткод: | D062 1801 |
| Деталь: | 1st Mirror Holder |
| Парткод: | A1931767 |
| Деталь: | Mirror: No.1: Assy |
| Парткод: | B132 1757 |
| Деталь: | Stay: Wire |
| Парткод: | B1321758 |
| Деталь: | REFLECTOR |
| Парткод: | D014 1762 |
| Деталь: | Holder: Connector |
| Парткод: | B132 1767 |
| Деталь: | Feeler: Home Position Sensor: No.1 |
| Парткод: | B132 1766 |
| Деталь: | GRIP |
| Парткод: | G570 2731 |
| Деталь: | Xenon Lamp: 66000LX |
| Парткод: | AX50 0103 |
| Деталь: | Bracket: Invertor |
| Парткод: | B132 1851 |
| Деталь: | Bracket: Fan: MM40: Invertor |
| Парткод: | B132 1852 |
| Деталь: | Fan Motor: MM40: 15mm |
| Парткод: | AX64 0149 |
| Деталь: | Harness: Connecting: Scanner: Lamp |
| Парткод: | B132 5304 |
| Деталь: | Stabilizer |
| Парткод: | AZ50 0076 |
| Деталь: | Pulley - 26Z |
| Парткод: | AB03 2717 |
| Деталь: | Spacer - M8 |
| Парткод: | AA132142 |
| Деталь: | Spring Plate - 2nd Mirror |
| Парткод: | G404 2810 |
| Деталь: | Mirror: No.2 |
| Парткод: | B132 1818 |
| Деталь: | Scanner Shoe Pin |
| Парткод: | B132 1820 |
| Деталь: | Shoe - Scanner |
| Парткод: | A069 1883 |
| Деталь: | Mirror: No.3 |
| Парткод: | B132 1819 |
| Деталь: | Holder: Pulley |
| Парткод: | B132 1815 |
| Деталь: | Pulley - High Voltage Supply Cord |
| Парткод: | G570 2834 |
| Деталь: | Cover: Dc Fan Motor |
| Парткод: | D062 5891 |
| Деталь: | Fan Motor DC12V 3.6W |
| Парткод: | AX64 0177 |
| Деталь: | Hinge: Control Unit |
| Парткод: | D062 5817 |
| Деталь: | Grip: Application |
| Парткод: | B712 5605 |
| Деталь: | Screw: M4: Exterior |
| Парткод: | AA14 3801 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B247 4455 |
| Деталь: | Bushing - 4x5x7 |
| Парткод: | AA08 0034 |
| Деталь: | Exit Roller - Driven |
| Парткод: | AF02 2126 |
| Деталь: | Paper Feed Sensor Bracket |
| Парткод: | B065 4358 |
| Деталь: | Photointerruptor: Exit |
| Парткод: | AW02 0197 |
| Деталь: | Relay Harness -exit |
| Парткод: | B065 4496 |
| Деталь: | Upper Exhaust Guide Plate |
| Парткод: | B140 4354 |
| Деталь: | Grip: Guide Plate: Upper: Assy |
| Парткод: | D131 4363 |
| Деталь: | Grip Supporter |
| Парткод: | B065 4359 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Bushing - Fusing Exit |
| Парткод: | AA08 0184 |
| Деталь: | Shaft: Grip: Guide Plate |
| Парткод: | B247 4361 |
| Деталь: | Upper Exit Guide Plate |
| Парткод: | B065 4373 |
| Деталь: | SPRING |
| Парткод: | AA06 6592 |
| Деталь: | Exit Entrance Sensor Bracket |
| Парткод: | B065 4374 |
| Деталь: | Relay Harness - Guide Plate |
| Парткод: | B065 4495 |
| Деталь: | Spring Plate |
| Парткод: | B065 4360 |
| Деталь: | SPRING |
| Парткод: | AA06 3879 |
| Деталь: | Bushing - MM5 |
| Парткод: | AA08 0240 |
| Деталь: | Roller: Decura: Driven: Assy |
| Парткод: | B247 4378 |
| Деталь: | Middle Exit Guide Plate |
| Парткод: | B065 4453 |
| Деталь: | Shaft: Contact Point: Assy |
| Парткод: | B247 4381 |
| Деталь: | Rear Fusing Plate |
| Парткод: | B065 4154 |
| Деталь: | Cover: Grip: Exit |
| Парткод: | D131 4273 |
| Деталь: | Protect Bracket Assy |
| Парткод: | B140 4470 |
| Деталь: | Lever Contact Bracket |
| Парткод: | B065 4266 |
| Деталь: | LOCK LEVER |
| Парткод: | B247 4259 |
| Деталь: | SPRING |
| Парткод: | AA06 0903 |
| Деталь: | Grip: Release: Fusing/Paper Exit Unit: Assy |
| Парткод: | D131 4683 |
| Деталь: | Decal: Grip: Fusing/Paper Exit Unit |
| Парткод: | D131 4287 |
| Деталь: | Lock Lever Bracket |
| Парткод: | B065 4262 |
| Деталь: | Shaft: Contact Point: Lever |
| Парткод: | B247 4260 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0023 |
| Деталь: | Case Cap |
| Парткод: | B065 3568 |
| Деталь: | Toner Correction Agitator |
| Парткод: | B065 3573 |
| Деталь: | Toner Collection Case |
| Парткод: | B065 3565 |
| Деталь: | Toner Receiving Spring |
| Парткод: | B065 3566 |
| Деталь: | Toner Catchpan |
| Парткод: | B065 3557 |
| Деталь: | Toner Collection Idle Gear |
| Парткод: | B065 3588 |
| Деталь: | Shaft: Idler: Discharge Used Toner |
| Парткод: | B247 3590 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Screw Gear |
| Парткод: | B065 3585 |
| Деталь: | SPRING |
| Парткод: | B065 3561 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2208 |
| Деталь: | Toner Collection Gear |
| Парткод: | B065 3587 |
| Деталь: | BUSHING |
| Парткод: | B065 3581 |
| Деталь: | Transport Screw: Discharge Used Toner: Assy |
| Парткод: | B247 3570 |
| Деталь: | SPRING GUIDE |
| Парткод: | B065 3583 |
| Деталь: | Base: Discharge Used Toner: Assy |
| Парткод: | B247 3559 |
| Деталь: | Screw Gear |
| Парткод: | B065 3586 |
| Деталь: | BUSHING - M4 |
| Парткод: | H053 2208 |
| Деталь: | Brushless MotorDC24V 2.4W |
| Парткод: | AX06 0302 |
| Деталь: | Toner Collection Discharge Harness |
| Парткод: | B065 3593 |
| Деталь: | Gear - 22Z |
| Парткод: | B065 3645 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Toner Collection Seal |
| Парткод: | B065 3636 |
| Деталь: | Toner Separation Case |
| Парткод: | B065 3629 |
| Деталь: | Toner Collection Pipe |
| Парткод: | B065 3601 |
| Деталь: | Transport Screw: Used Toner: Unit |
| Парткод: | B247 3670 |
| Деталь: | Seal - 40x68 |
| Парткод: | B065 3637 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Shaft: Discharge Used Toner: Classification: Assy |
| Парткод: | B247 3604 |
| Деталь: | Shaft: Discharge Used Toner: Long: Assy |
| Парткод: | B247 3609 |
| Деталь: | Ratch |
| Парткод: | A096 3712 |
| Деталь: | Toner Collection Shaft |
| Парткод: | B065 3610 |
| Деталь: | Relay Paper Feed Harness |
| Парткод: | B065 2762 |
| Деталь: | Transport Screw: Discharge Used Toner: Classification: Assy |
| Парткод: | B247 3641 |
| Деталь: | Toner Collection Joint |
| Парткод: | B065 3650 |
| Деталь: | Toner Collection Case - Transport |
| Парткод: | B065 3649 |
| Деталь: | Shielding Plate: Discharge Used Toner: Transfer |
| Парткод: | B247 3652 |
| Деталь: | PULLEY |
| Парткод: | B065 3660 |
| Деталь: | Toner Collection Cap |
| Парткод: | B065 3654 |
| Деталь: | Roller: Turn: Duplex |
| Парткод: | D131 4814 |
| Деталь: | Roller: Transport: Driven: Left: Right |
| Парткод: | B247 4812 |
| Деталь: | Roller: Reversal: Drive |
| Парткод: | B247 4813 |
| Деталь: | Roller: Drive: Left |
| Парткод: | B247 4825 |
| Деталь: | Jogger Guide Rod |
| Парткод: | B065 4694 |
| Деталь: | Right Drive Roller |
| Парткод: | AF02 1079 |
| Деталь: | Turn Gear |
| Парткод: | AB01 1464 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | PULLEY |
| Парткод: | AB01 7614 |
| Деталь: | Connecting Gear |
| Парткод: | AB01 1463 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Gear - 32Z |
| Парткод: | AB01 1496 |
| Деталь: | Pulley - 29Z |
| Парткод: | AB03 0731 |
| Деталь: | Timing Pulley - 24Z |
| Парткод: | AB03 0583 |
| Деталь: | Timing Belt - 40S2M268G |
| Парткод: | AA04 3293 |
| Деталь: | Tandem LCT: Left: Assy |
| Парткод: | D131 6623 |
| Деталь: | Tandem LCT: Left: Letter: Assy |
| Парткод: | D131 6625 |
| Деталь: | Gear - Z18 |
| Парткод: | AB01 3798 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0163 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Inner Cover: Tandem LCT: Left |
| Парткод: | D062 6646 |
| Деталь: | Decal: Paper Set Direction: Tandem LCT: Lef |
| Парткод: | D131 6846 |
| Деталь: | End Fence: Auxiliary |
| Парткод: | B098 6647 |
| Деталь: | Side Plate: Tandem LCT: Left Sideways |
| Парткод: | B098 6645 |
| Деталь: | Side Fence: Tandem LCT: Left Front |
| Парткод: | B098 6643 |
| Деталь: | Tray Bottom Plate: Left Front |
| Парткод: | B098 6640 |
| Деталь: | Tray Bottom Plate: Left Middle: Assy |
| Парткод: | D131 6839 |
| Деталь: | Tray Bottom Plate: Left Rear |
| Парткод: | B098 6642 |
| Деталь: | Decal: Paper Set Direction: Tandem Tray: Lef |
| Парткод: | D131 6876 |
| Деталь: | Sensor bracket |
| Парткод: | B065 6831 |
| Деталь: | Decal: Side Fence: 40x30 |
| Парткод: | AA00 1586 |
| Деталь: | Side Fence: Tandem LCT: Left Rear |
| Парткод: | B098 6644 |
| Деталь: | Cover: Rear: Tandem LCT: Assy |
| Парткод: | B098 6649 |
| Деталь: | Rear Cover Cushion - Tandem LCT |
| Парткод: | A293 6649 |
| Деталь: | Back Fence - Left |
| Парткод: | B247 6624 |
| Деталь: | Timing Belt Cover |
| Парткод: | B065 6823 |
| Деталь: | Timing Pulley - 15T |
| Парткод: | AB03 3085 |
| Деталь: | Shaft: Slider: Back Fence |
| Парткод: | B247 6950 |
| Деталь: | Slider: Back Fence: Left |
| Парткод: | B132 7564 |
| Деталь: | Pulley Bracket |
| Парткод: | B065 6830 |
| Деталь: | Timing Belt S3M 196T |
| Парткод: | AA04 3271 |
| Деталь: | Lever: Coupling: Left |
| Парткод: | D059 6620 |
| Деталь: | Harness: Tandem LCT: Left |
| Парткод: | D131 6701 |
| Деталь: | Timing Pulley - 15T |
| Парткод: | AB03 3084 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Shaft - Timing Pulley |
| Парткод: | AA14 0686 |
| Деталь: | Gear - 48T |
| Парткод: | AB01 9475 |
| Деталь: | Tension Spring - 10n |
| Парткод: | B247 6755 |
| Деталь: | Bracket: Pulley: Driven: Assy |
| Парткод: | B247 6951 |
| Деталь: | Bracket: Dc Motor: Left: Peen |
| Парткод: | D062 6665 |
| Деталь: | DC Motor: Tandem LCT |
| Парткод: | AX04 0145 |
| Деталь: | Cover: Harness: Image Processing Unit |
| Парткод: | D062 5995 |
| Деталь: | Ground Plate - Lens Stay |
| Парткод: | A294 1838 |
| Деталь: | Ground Wire: Connecting: Earth |
| Парткод: | D062 5987 |
| Деталь: | Bracket: Connecting: Earth |
| Парткод: | D062 5981 |
| Деталь: | Ground Plate: Power Supply Unit |
| Парткод: | D062 5856 |
| Деталь: | Harness: Main: Upper |
| Парткод: | D131 5416 |
| Деталь: | Harness: SIOB: BCU |
| Парткод: | D062 5472 |
| Деталь: | Harness: Main: Left: Low Speed: EXP (D131/D132) |
| Парткод: | D062 5414 |
| Деталь: | Harness: Machine or Copier: Left (D133) |
| Парткод: | D066 5419 |
| Деталь: | PCB: BCU: 60-75CPM: Service |
| Парткод: | D131 5122 |
| Деталь: | PCB: BCU: 90CPM: Service |
| Парткод: | D133 5122 |
| Деталь: | DC Solenoid: End Fence: Front: Assy |
| Парткод: | B132 7547 |
| Деталь: | Lever: Release: Front |
| Парткод: | B070 6683 |
| Деталь: | Tension Spring - Short |
| Парткод: | AA06 0758 |
| Деталь: | Hook - Tension Spring |
| Парткод: | A248 6713 |
| Деталь: | Tension Spring - Long |
| Парткод: | AA06 0757 |
| Деталь: | End Fence - Front |
| Парткод: | B247 6713 |
| Деталь: | End Fence Guide |
| Парткод: | B065 6712 |
| Деталь: | Bracket: ON OFF Detector: Front |
| Парткод: | B065 6881 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | End Fence - Rear |
| Парткод: | B247 6714 |
| Деталь: | Detector Bracket |
| Парткод: | B065 6884 |
| Деталь: | DC Solenoid: End Fence: Rear: Assy |
| Парткод: | D131 7571 |
| Деталь: | Side Plate: Tandem Lct: Right Rear: Assy |
| Парткод: | B247 6811 |
| Деталь: | Lever: Release: Rear |
| Парткод: | B070 6684 |
| Деталь: | Wire Pulley - M10 |
| Парткод: | AB03 2058 |
| Деталь: | Guide - Pulley |
| Парткод: | A248 6695 |
| Деталь: | Pulley - M10 |
| Парткод: | AB03 2719 |
| Деталь: | Shaft: Drive: Tray Bottom Plate: Right: Press |
| Парткод: | B247 6958 |
| Деталь: | Pulley: Drive Were: Assy |
| Парткод: | B247 6694 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Harness: Tandem LCT: Right |
| Парткод: | D131 6703 |
| Деталь: | Right Bracket |
| Парткод: | B065 6743 |
| Деталь: | Large Lever |
| Парткод: | B065 6862 |
| Деталь: | Spacer - 6mm |
| Парткод: | AA13 2203 |
| Деталь: | SENSOR |
| Парткод: | AW01 0113 |
| Деталь: | Cushion - Large |
| Парткод: | AA16 1129 |
| Деталь: | Front Roller - Slide Rail |
| Парткод: | A294 6655 |
| Деталь: | Roller - Slide Rail |
| Парткод: | AF02 2105 |
| Деталь: | Cushion - Small |
| Парткод: | AA16 1130 |
| Деталь: | Small Lever |
| Парткод: | B065 6864 |
| Деталь: | Wire Ring |
| Парткод: | A248 6694 |
| Деталь: | Stay -Right Base |
| Парткод: | B065 6870 |
| Деталь: | Feeler - Paper Height Sensor |
| Парткод: | A294 6690 |
| Деталь: | Paper Volume Shield Plate |
| Парткод: | B065 6717 |
| Деталь: | Side Plate: Tandem LCT: Front Right: Assy |
| Парткод: | B247 6955 |
| Деталь: | Oil Damper: Fall |
| Парткод: | B247 6901 |
| Деталь: | Gear - 30Z |
| Парткод: | AB01 3781 |
| Деталь: | Oil Damper Bracket |
| Парткод: | B065 6872 |
| Деталь: | Decal: Exposure Glass: Cleaning |
| Парткод: | D131 1368 |
| Деталь: | Cover: Upper Left |
| Парткод: | D131 1311 |
| Деталь: | Design Plate: Left |
| Парткод: | D131 1329 |
| Деталь: | Screw: M4: DIA5 |
| Парткод: | AA14 3879 |
| Деталь: | Screw: M3: DIA5 |
| Парткод: | AA14 3878 |
| Деталь: | Cover: Upper Front |
| Парткод: | D131 1345 |
| Деталь: | Design Plate: Front Left |
| Парткод: | D131 1347 |
| Деталь: | Design Plate: Front Right |
| Парткод: | D131 1346 |
| Деталь: | Cover: Upper Rear |
| Парткод: | D131 1309 |
| Деталь: | Design Plate: Left Rear |
| Парткод: | D131 1327 |
| Деталь: | Design Plate: Right Rear |
| Парткод: | D131 1326 |
| Деталь: | Decal: Caution: Original: EXP |
| Парткод: | D131 1379 |
| Деталь: | Cover: Upper Right |
| Парткод: | D131 1310 |
| Деталь: | Design Plate: Right |
| Парткод: | D131 1328 |
| Деталь: | Ground Plate: Operation Panel: Side |
| Парткод: | D131 1354 |
| Деталь: | Fan bracket |
| Парткод: | B065 1345 |
| Деталь: | Fan Motor DC24V/1.44W |
| Парткод: | AX64 0175 |
| Деталь: | Inner Cover: Operation Sub-unit |
| Парткод: | D131 1314 |
| Деталь: | Adjusting Pin: Transport Belt Unit |
| Парткод: | B652 1141 |
| Деталь: | Pin: Guide Plate: Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Discharge Brush: L11 |
| Парткод: | B477 2622 |
| Деталь: | Stay: Frame: Left |
| Парткод: | B652 1152 |
| Деталь: | Right Frame Stay |
| Парткод: | B477 1161 |
| Деталь: | Hinge: Left: Assy |
| Парткод: | D412 1211 |
| Деталь: | Hinge: Right: Assy |
| Парткод: | D4121250 |
| Деталь: | Arm Shaft |
| Парткод: | B477 1171 |
| Деталь: | CLAMP |
| Парткод: | B477 4921 |
| Деталь: | Screw: DIA6: 14.5: M4 |
| Парткод: | AA14 3842 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B652 1136 |
| Деталь: | Contact Point Shaft |
| Парткод: | A806 1135 |
| Деталь: | Sensor Feeler |
| Парткод: | B477 1185 |
| Деталь: | Sensor bracket |
| Парткод: | B477 1181 |
| Деталь: | Photointerruptor: GP1A173LCS2F |
| Парткод: | AW02 0203 |
| Деталь: | Detection Sensor Harness |
| Парткод: | B477 5611 |
| Деталь: | PCU: Lower: Assy |
| Парткод: | D131 2260 |
| Деталь: | PCU: Lower: NA: Assy |
| Парткод: | D131 2261 |
| Деталь: | PCU Unit - Upper |
| Парткод: | B247 2270 |
| Деталь: | Upper Unit Cover |
| Парткод: | A293 2418 |
| Деталь: | Upper PCU Harness |
| Парткод: | B065 2494 |
| Деталь: | LED ARRAY |
| Парткод: | B234 2270 |
| Деталь: | GROUNDING PLATE |
| Парткод: | A096 2301 |
| Деталь: | Electric Potential Sensor |
| Парткод: | B247 2271 |
| Деталь: | Receptacle |
| Парткод: | B065 2392 |
| Деталь: | Toner Recycling Assy |
| Парткод: | B247 2395 |
| Деталь: | Toner Recycling Gear |
| Парткод: | AB01 1462 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2208 |
| Деталь: | Toner Recycling Connecting Gear |
| Парткод: | AB01 1461 |
| Деталь: | Shaft: Connecting: Toner Recycling |
| Парткод: | B247 2377 |
| Деталь: | BUSHING |
| Парткод: | AA08 2122 |
| Деталь: | Drum Stay |
| Парткод: | B065 2371 |
| Деталь: | SPRING |
| Парткод: | AA06 0891 |
| Деталь: | Pressure Release Lever |
| Парткод: | B065 2426 |
| Деталь: | Filter: Development |
| Парткод: | B247 3340 |
| Деталь: | Shield Glass Cover |
| Парткод: | B065 1957 |
| Деталь: | OPC Drum: MT-C3 |
| Парткод: | B246 9510 |
| Деталь: | Cover: Tandem LCT |
| Парткод: | D131 6630 |
| Деталь: | Decal: Paper Tray: Design Sketch: Multi-language |
| Парткод: | AA00 3221 |
| Деталь: | Grip: Paper Tray |
| Парткод: | D131 6627 |
| Деталь: | Torsion Spring: Stopper: Tandem LCT |
| Парткод: | D062 6701 |
| Деталь: | Stopper: Tandem LCT |
| Парткод: | D062 6702 |
| Деталь: | Link: Stopper: Tandem LCT: Peen |
| Парткод: | D062 6703 |
| Деталь: | Bracket: Base: Stopper: Tandem LCT |
| Парткод: | D059 6699 |
| Деталь: | Arm: Grip: Tandem LCT: Right |
| Парткод: | D062 6713 |
| Деталь: | Arm: Grip: Tandem LCT: Left |
| Парткод: | D062 6705 |
| Деталь: | Shaft: Grip: Tandem LCT |
| Парткод: | D062 6706 |
| Деталь: | Torsion Spring: Grip: Tandem LCT |
| Парткод: | D062 6715 |
| Деталь: | Bracket: Grip: Tandem LCT: Left |
| Парткод: | D062 6716 |
| Деталь: | Bracket: Grip: Tandem LCT: Right |
| Парткод: | D062 6717 |
| Деталь: | Base: Stopper: Tandem LCT: Peen |
| Парткод: | D062 6707 |
| Деталь: | Toner Collection Coil |
| Парткод: | B247 2326 |
| Деталь: | Agitator: Assy |
| Парткод: | B247 2322 |
| Деталь: | Toner Collection Coil Bushing |
| Парткод: | AA08 2121 |
| Деталь: | Agitator Gear |
| Парткод: | B065 2428 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2208 |
| Деталь: | Shaft: Brush Roller: Front: Assy |
| Парткод: | B247 2366 |
| Деталь: | Brush Roller: Cleaning |
| Парткод: | B247 2330 |
| Деталь: | Roller Bushing |
| Парткод: | AA08 2119 |
| Деталь: | Gear: Brush Roller |
| Парткод: | D062 2425 |
| Деталь: | Bushing - Brush Roller |
| Парткод: | AA08 2094 |
| Деталь: | Pre-transfer Lamp Harness Plate |
| Парткод: | B140 2421 |
| Деталь: | Case: PCU: Lower: Assy |
| Парткод: | B247 2300 |
| Деталь: | Inner Case Seal |
| Парткод: | AA15 3085 |
| Деталь: | Cleaning Entrance Seal - 3x345x2 |
| Парткод: | AA15 3088 |
| Деталь: | Front Drum Seal |
| Парткод: | AA15 2431 |
| Деталь: | Rear Drum Seal |
| Парткод: | A294 3572 |
| Деталь: | Toner Collection Coil Gear |
| Парткод: | AB01 1459 |
| Деталь: | GEAR |
| Парткод: | AB01 7612 |
| Деталь: | Idler Gear |
| Парткод: | AB01 1460 |
| Деталь: | Cam - Blade |
| Парткод: | B065 2427 |
| Деталь: | Bracket: Swivel: Blade: Assy |
| Парткод: | B247 2353 |
| Деталь: | Shoulder Screw - M3 |
| Парткод: | 52 062 684 |
| Деталь: | Pre-transfer Lamp Case Assy |
| Парткод: | B140 2382 |
| Деталь: | LED ARRAY |
| Парткод: | B234 2270 |
| Деталь: | Stay: Transfer: Entrance: Assy |
| Парткод: | D131 2413 |
| Деталь: | Shaft: Separation: Drive: Assy |
| Парткод: | D412 2200 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Spacer - M6.5x1 |
| Парткод: | A4181158 |
| Деталь: | Compression Spring: Paper Feed: Joint |
| Парткод: | AA06 3435 |
| Деталь: | SPACER |
| Парткод: | AA13 2013 |
| Деталь: | Guide Plate Cushion |
| Парткод: | A806 1163 |
| Деталь: | Front Entrance Guide |
| Парткод: | B477 2172 |
| Деталь: | Rear Entrance Guide |
| Парткод: | B477 2182 |
| Деталь: | Feed-in Unit Stopper |
| Парткод: | A680 1621 |
| Деталь: | Bushing - 8mm |
| Парткод: | A628 1225 |
| Деталь: | Feed Belt Drive Roller |
| Парткод: | A8061293 |
| Деталь: | Separation Shaft |
| Парткод: | B477 2191 |
| Деталь: | Feed Belt |
| Парткод: | A8061295 |
| Деталь: | Feed Belt Driven Roller |
| Парткод: | A806 1294 |
| Деталь: | Transport Belt Roller Shaft |
| Парткод: | A8061298 |
| Деталь: | Compression Spring: Paper Feed Belt |
| Парткод: | D412 2232 |
| Деталь: | Feed Belt Bracket |
| Парткод: | A806 1292 |
| Деталь: | Pick-up Roller Lever |
| Парткод: | B477 2231 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Pickup Roller: Coupling |
| Парткод: | B477 2227 |
| Деталь: | PICK-UP ROLLER |
| Парткод: | B477 2225 |
| Деталь: | Spacer - 6x20x1 |
| Парткод: | AA132171 |
| Деталь: | Timing Belt: B40S2M142 |
| Парткод: | B652 2213 |
| Деталь: | Timing Pulley: T21: S2M |
| Парткод: | D412 2212 |
| Деталь: | Guide: Paper Feed Belt: Front |
| Парткод: | B652 2215 |
| Деталь: | Pick-up Roller Bracket |
| Парткод: | B477 2222 |
| Деталь: | Timing Pulley - T19/Z23 S2M/M0.6 |
| Парткод: | A806 2151 |
| Деталь: | Gear - Z18 |
| Парткод: | A806 2271 |
| Деталь: | Shaft: Cleaner |
| Парткод: | AA14 3789 |
| Деталь: | Toner Supply Unit: Assy |
| Парткод: | D131 3210 |
| Деталь: | Toner Supply Unit: M-90: Assy |
| Парткод: | D133 3210 |
| Деталь: | Case: Classification: Assy |
| Парткод: | D131 3161 |
| Деталь: | Case: Classification: D133: Assy |
| Парткод: | D133 3161 |
| Деталь: | Toner Separation Joint Seal |
| Парткод: | B065 3122 |
| Деталь: | Rear Toner Separation Joint Seal |
| Парткод: | B065 3123 |
| Деталь: | Toner Separation Drive Shaft |
| Парткод: | B065 3125 |
| Деталь: | BUSHING - 6MM |
| Парткод: | 50 530 447 |
| Деталь: | Transport Screw |
| Парткод: | B247 3720 |
| Деталь: | Idle Gear |
| Парткод: | B065 3138 |
| Деталь: | Toner Collection Gear |
| Парткод: | B065 3139 |
| Деталь: | Toner End Sensor: Assy |
| Парткод: | B247 5311 |
| Деталь: | Slitter |
| Парткод: | A096 3181 |
| Деталь: | NUT |
| Парткод: | B065 3146 |
| Деталь: | Lower Front Case Seal - Rear |
| Парткод: | B065 3152 |
| Деталь: | Lower Right Case Seal |
| Парткод: | B065 3151 |
| Деталь: | Lower Filter Case Filter |
| Парткод: | B065 3153 |
| Деталь: | SPRING |
| Парткод: | AA06 0291 |
| Деталь: | Joint Gear - 15Z |
| Парткод: | AB01 3748 |
| Деталь: | Boss: Bearing: Agitator: Press Fit |
| Парткод: | B247 3176 |
| Деталь: | Gear - 15Z |
| Парткод: | AB01 3749 |
| Деталь: | Gear - 16Z |
| Парткод: | AB01 3747 |
| Деталь: | Bushing 8x14x8 |
| Парткод: | B247 3175 |
| Деталь: | UPPER COVER |
| Парткод: | B065 3140 |
| Деталь: | Exit Toner Pile |
| Парткод: | B065 3141 |
| Деталь: | Toner Separation Spring |
| Парткод: | B065 3143 |
| Деталь: | Toner Separation Shutter |
| Парткод: | B065 3142 |
| Деталь: | Case Seal |
| Парткод: | A229 3154 |
| Деталь: | Heat Insulation |
| Парткод: | B065 1095 |
| Деталь: | Left Duct - PCU |
| Парткод: | B065 1091 |
| Деталь: | Duct Clip |
| Парткод: | B065 1094 |
| Деталь: | Bracket: Total Counter |
| Парткод: | D062 5918 |
| Деталь: | Positioning Plate: Fusing Unit: Assy |
| Парткод: | B247 4168 |
| Деталь: | Slide Rail: Fusing/Paper Exit Unit: Right |
| Парткод: | AA07 0084 |
| Деталь: | Transfer Rely Harness |
| Парткод: | B065 3812 |
| Деталь: | Transfer Unit Stay |
| Парткод: | B065 3811 |
| Деталь: | Harness: Connecting: PCU |
| Парткод: | D131 2496 |
| Деталь: | Left Rail |
| Парткод: | B065 1098 |
| Деталь: | Positioning Plate: Transfer Unit: Assy |
| Парткод: | B247 3820 |
| Деталь: | Bushing - 10mm |
| Парткод: | AA08 2064 |
| Деталь: | Lever: Transfer Unit: Assy |
| Парткод: | D131 3832 |
| Деталь: | Decal: Lever: Transfer Unit |
| Парткод: | D131 3833 |
| Деталь: | Channel: Lengthwise: Middle Front: Assy |
| Парткод: | B247 3815 |
| Деталь: | Release Positioning Plate |
| Парткод: | B065 3831 |
| Деталь: | Front Transfer Stay |
| Парткод: | B065 1096 |
| Деталь: | Heater: 120V |
| Парткод: | B246 3841 |
| Деталь: | Heater: 240V |
| Парткод: | B246 3843 |
| Деталь: | Roller - Positioning Guide |
| Парткод: | 67 542 866 |
| Деталь: | Handle Stay |
| Парткод: | B247 3827 |
| Деталь: | Rail: Development Unit: Assy |
| Парткод: | B065 3250 |
| Деталь: | Rail: Development Unit: 90: Assy |
| Парткод: | D066 3250 |
| Деталь: | Development Grounding Plate |
| Парткод: | A096 1679 |
| Деталь: | Total Counter: 7Fig: 24V |
| Парткод: | AX31 0045 |
| Деталь: | Tandem LCT: Right: Assy |
| Парткод: | D131 6608 |
| Деталь: | Tandem LCT: Right: Letter: Assy |
| Парткод: | D131 6609 |
| Деталь: | Decal: Side Fence: 16x30 |
| Парткод: | AA00 1587 |
| Деталь: | Side Plate: Side: Assy |
| Парткод: | A248 6666 |
| Деталь: | Decal: Caution Chart: Tandem LCT |
| Парткод: | D131 6871 |
| Деталь: | Inner Cover: Tandem LCT: Right |
| Парткод: | D131 6780 |
| Деталь: | Protection -inner Cover |
| Парткод: | B065 6875 |
| Деталь: | Decal: Paper Set Direction: Tandem LCT: Rig |
| Парткод: | D131 6870 |
| Деталь: | Plate: Paper |
| Парткод: | B234 6690 |
| Деталь: | Side Fence: Tandem LCT: Right Front |
| Парткод: | B098 6736 |
| Деталь: | Side Fence: Tandem LCT: Right Front |
| Парткод: | B098 6737 |
| Деталь: | Bracket: Paper Volume Sensor: Tandem LCT |
| Парткод: | B065 6706 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Friction pad |
| Парткод: | 52 012 858 |
| Деталь: | Decal: Paper Set Direction: Tandem Tray: Right |
| Парткод: | D131 6877 |
| Деталь: | Base: Tandem LCT: Right: Adhesion |
| Парткод: | D131 6716 |
| Деталь: | Bracket: Sensor: Paper Volume |
| Парткод: | B065 6874 |
| Деталь: | Side Fence: Tandem LCT: Right Rear |
| Парткод: | B247 6738 |
| Деталь: | Supporting Plate: Tandem: Right Rear |
| Парткод: | B098 6739 |
| Деталь: | Shield: Tandem LCT: Rear Right |
| Парткод: | B475 6855 |
| Деталь: | Inner Cover Cushion - Right Rear |
| Парткод: | AA15 3138 |
| Деталь: | Guide: Misfeed Removal: Paper Tray |
| Парткод: | B247 6695 |
| Деталь: | Guide: Interlock: Tandem LCT |
| Парткод: | B247 6672 |
| Деталь: | Bracket: Sensor: Fall |
| Парткод: | B065 6873 |
| Деталь: | Image Scanning Board: Assy |
| Парткод: | D131 1731 |
| Деталь: | Original Sensor - 66mm |
| Парткод: | AW01 0133 |
| Деталь: | Duct: Cooling: CCD |
| Парткод: | D062 1677 |
| Деталь: | Filter: Duct: CCD: Cooling |
| Парткод: | D062 1669 |
| Деталь: | Interface Cable: Scanner : Image Processing Unit |
| Парткод: | D131 5305 |
| Деталь: | PCB: SIOB |
| Парткод: | D081 5490 |
| Деталь: | Decal - LD 655 |
| Парткод: | AA00 0217 |
| Деталь: | Cushion: Scanner |
| Парткод: | D062 1739 |
| Деталь: | Harness: SBU: Power |
| Парткод: | D081 5304 |
| Деталь: | Harness: SBU |
| Парткод: | D131 5303 |
| Деталь: | Harness: Siob: Original Sensor |
| Парткод: | D131 5300 |
| Деталь: | Harness: Siob: BCU: Connecting: Fanlamp |
| Парткод: | D062 5467 |
| Деталь: | Cover: Shaft |
| Парткод: | D081 1716 |
| Деталь: | Cover: Polygon Mirror Motor: Assy |
| Парткод: | D131 1679 |
| Деталь: | Fan: MM60: DC 3.12W |
| Парткод: | AX64 0201 |
| Деталь: | Harness: Development: Fan: Connecting |
| Парткод: | D062 1172 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 1845 |
| Деталь: | Ground Plate: Frame |
| Парткод: | D062 1032 |
| Деталь: | Fan: Mm60 |
| Парткод: | AX64 0211 |
| Деталь: | Bracket: Fix: Front |
| Парткод: | D062 1732 |
| Деталь: | Bracket: Fix: Rear |
| Парткод: | D062 1734 |
| Деталь: | Stepper Motor: Reverse: Assy |
| Парткод: | B132 4780 |
| Деталь: | Bracket: Motor: Reverse: Assy |
| Парткод: | B247 4810 |
| Деталь: | GEAR |
| Парткод: | AB01 7616 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3291 |
| Деталь: | DC Solenoid: Reversal: Assy |
| Парткод: | D062 4745 |
| Деталь: | Stepper Motor: Jogger: Assy |
| Парткод: | B132 4650 |
| Деталь: | Jogger Motor Bracket |
| Парткод: | B065 4696 |
| Деталь: | Stepper Motor: Transport: Assy |
| Парткод: | D062 4785 |
| Деталь: | Transport Motor Bracket |
| Парткод: | B065 4789 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3292 |
| Деталь: | STEPPED SCREW |
| Парткод: | AA14 3183 |
| Деталь: | MAGNETIC |
| Парткод: | AA02 1034 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Roller Lever |
| Парткод: | A294 4754 |
| Деталь: | SPRING |
| Парткод: | AA06 0806 |
| Деталь: | Front Jogger Fence |
| Парткод: | B065 4681 |
| Деталь: | Rear Jogger Fence |
| Парткод: | B065 4682 |
| Деталь: | Spring Plate - Rear Jogger Fence |
| Парткод: | B065 4683 |
| Деталь: | Stepped Screw - M3X4 |
| Парткод: | AA14 3811 |
| Деталь: | Left Duplex Table |
| Парткод: | B065 4720 |
| Деталь: | SPRING |
| Парткод: | AA06 3655 |
| Деталь: | Bushing - 4x5x7 |
| Парткод: | AA08 0034 |
| Деталь: | Roller: Reversal: Driven |
| Парткод: | B247 4594 |
| Деталь: | Bracket: Reversal: Driven: Assy |
| Парткод: | B247 4655 |
| Деталь: | Sheet: Heat Sink: DC Stepper Motor: Transport: Duplex |
| Парткод: | D066 4782 |
| Деталь: | Total Counter: 7Fig: 24V |
| Парткод: | AX31 0045 |
| Деталь: | Total Counter: Service |
| Парткод: | D131 9590 |
| Деталь: | Harness: CTL: Fan: Connecting |
| Парткод: | D062 5513 |
| Деталь: | PCB: PC4200: RAWCARD-C: 512MB |
| Парткод: | G178 6062 |
| Деталь: | PCB: PC4200: RAWCARD-A: 1GB |
| Парткод: | G178 6072 |
| Деталь: | PCB: EXP_CTL: Service: D131 |
| Парткод: | D131 5608 |
| Деталь: | PCB: EXP_CTL: Service: D132 |
| Парткод: | D132 5608 |
| Деталь: | PCB: EXP_CTL: Service: D133 |
| Парткод: | D133 5608 |
| Деталь: | Ground Plate: USB |
| Парткод: | D131 5979 |
| Деталь: | Ground Plate: Control Board: L63.2 |
| Парткод: | D062 5883 |
| Деталь: | Ground Plate: Control Board: L76 |
| Парткод: | D062 5884 |
| Деталь: | Large Drum Stay Ground Plate |
| Парткод: | B070 6877 |
| Деталь: | Bracket: Drum Stay: Control Board |
| Парткод: | D062 5851 |
| Деталь: | Cover: SD-Card |
| Парткод: | D014 5973 |
| Деталь: | Interface Panel |
| Парткод: | B101 5993 |
| Деталь: | Cover: Connector: EFI |
| Парткод: | D014 5974 |
| Деталь: | Pin: Guide Plate: Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Shaft: Contact Point: Scanning: Exit: Long |
| Парткод: | D412 2641 |
| Деталь: | Shaft: Contact Point: Scanning: Exit: Short |
| Парткод: | D412 2645 |
| Деталь: | Guide Plate: Exit: Lower |
| Парткод: | D412 2632 |
| Деталь: | Roller: Scanning: Exit: Driven |
| Парткод: | B652 4519 |
| Деталь: | Compression Spring: Scanning: Exit |
| Парткод: | D412 2646 |
| Деталь: | Driven Exit Arm |
| Парткод: | B477 2637 |
| Деталь: | Guide Plate: Exit: Lower |
| Парткод: | D412 2672 |
| Деталь: | Driven Exit Scanning Roller |
| Парткод: | B477 2636 |
| Деталь: | Compression Spring:Contact Image Sensor: Exit |
| Парткод: | D412 2677 |
| Деталь: | Exit Arm |
| Парткод: | B477 2872 |
| Деталь: | Shaft: Contact Point: Exit |
| Парткод: | D412 2676 |
| Деталь: | Spacer: Guide Plate:Contact Image Sensor: Entra |
| Парткод: | D412 2662 |
| Деталь: | Guide Plate: Contact Image Sensor:Entrance: Cementaion |
| Парткод: | D609 2655 |
| Деталь: | Lever: Guide Plate:Contact Image Sensor: Front |
| Парткод: | D543 3664 |
| Деталь: | Lever: Guide Plate:Contact Image Sensor: Rear |
| Парткод: | D543 3665 |
| Деталь: | Tension Spring: Guide Plate: Pressure: 2N |
| Парткод: | D412 2669 |
| Деталь: | Bushing: DIA6 |
| Парткод: | D412 2653 |
| Деталь: | Spring - 12n |
| Парткод: | B477 4129 |
| Деталь: | Roller: Scanning: Behind: Assy |
| Парткод: | D412 2651 |
| Деталь: | Discharge Brush: L11 |
| Парткод: | B477 2622 |
| Деталь: | Seal - 0.7x13x20 |
| Парткод: | A422 1063 |
| Деталь: | Cover: Roller: Scanning: Behind |
| Парткод: | D501 2618 |
| Деталь: | Gear - 21Z |
| Парткод: | B477 3241 |
| Деталь: | Pressure Plate Tape |
| Парткод: | B477 2715 |
| Деталь: | Discharge Brush: Exit |
| Парткод: | D642 3666 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 1844 |
| Деталь: | Cover: USB |
| Парткод: | D131 5820 |
| Деталь: | Cable: HDD: SATA: Gray: M-C4 |
| Парткод: | D062 5782 |
| Деталь: | Cable: HDD: SATA: Power: M-C5 |
| Парткод: | D131 5784 |
| Деталь: | HDD: Toshiba: 250GB |
| Парткод: | D142 5765 |
| Деталь: | Stepped Screw - M3 |
| Парткод: | AA14 3848 |
| Деталь: | Rubber Cushion |
| Парткод: | AA16 1125 |
| Деталь: | Ground Plate: HDD |
| Парткод: | D131 5834 |
| Деталь: | Harness: AC Power Supply: CTL-PSU |
| Парткод: | D062 5625 |
| Деталь: | Harness: DC Power Supply: IPU |
| Парткод: | D062 5517 |
| Деталь: | Power Supply Unit: CTL: DOM/NA: M-C4 |
| Парткод: | AZ23 0235 |
| Деталь: | Power Supply Unit: CTL: EU/AA: M-C4 |
| Парткод: | AZ23 0244 |
| Деталь: | PCB: IPU |
| Парткод: | D131 5141 |
| Деталь: | Harness: IPU: BCU: 50 |
| Парткод: | D062 5451 |
| Деталь: | Shoulder Screw - M3 |
| Парткод: | 52 062 684 |
| Деталь: | Harness: IPU: BCU: 40 |
| Парткод: | D062 5452 |
| Деталь: | SD-Card: PSunit/VM_Calypso: EXP: Assy |
| Парткод: | D131 5595 |
| Деталь: | Harness: PWRCTL_DC24V: Connecting: EXP |
| Парткод: | D062 5561 |
| Деталь: | Harness: Bank: Dehumidifier: 60/75 |
| Парткод: | D062 5602 |
| Деталь: | Power Supply Unit: Main: DOM/NA: MC-4 |
| Парткод: | AZ24 0174 |
| Деталь: | Power Supply Unit: Main: EU/AA: M-C4 |
| Парткод: | AZ24 0182 |
| Деталь: | Power Supply Unit: Main: NA/KOR/TWN: M-C4 |
| Парткод: | AZ24 0186 |
| Деталь: | Power Supply Cord - 120V |
| Парткод: | B065 5672 |
| Деталь: | Power Supply Cord: EU |
| Парткод: | B246 5677 |
| Деталь: | Power Supply Cord: EU: Assy |
| Парткод: | D062 5057 |
| Деталь: | Power Supply Cord: EU: 90: Assy |
| Парткод: | D066 5057 |
| Деталь: | Power Supply Cord: NA: 250V: Assy |
| Парткод: | D066 5672 |
| Деталь: | Power Supply Cord: 250V: 10A: EU |
| Парткод: | D131 5677 |
| Деталь: | Power Supply Code: 250V: 10A: UK |
| Парткод: | D131 5678 |
| Деталь: | Stopper: Power Supply Cord: Typec |
| Парткод: | D062 5885 |
| Деталь: | Stopper: Power Supply Cord: EU |
| Парткод: | D131 5985 |
| Деталь: | Bracket: Power Supply Cord: DOM |
| Парткод: | D062 5880 |
| Деталь: | Bracket: Power Supply Cord: EXP |
| Парткод: | D062 5881 |
| Деталь: | Harness: AC: Inlet: Assy |
| Парткод: | D131 5980 |
| Деталь: | Ground Plate: Power Supply Unit |
| Парткод: | D062 5856 |
| Деталь: | Lever: Lock |
| Парткод: | D131 2717 |
| Деталь: | Decal: Positioning Display: B2 |
| Парткод: | D131 2643 |
| Деталь: | Front Lock |
| Парткод: | A096 2633 |
| Деталь: | Read Rock |
| Парткод: | A229 2655 |
| Деталь: | Bushing - 4x6x7mm |
| Парткод: | 54 432 668 |
| Деталь: | Lock Shaft |
| Парткод: | B247 2642 |
| Деталь: | Open And Close Guide Assy |
| Парткод: | B140 2647 |
| Деталь: | Rear Lock Spring |
| Парткод: | B247 2644 |
| Деталь: | Bushing - M8 |
| Парткод: | AA08 2116 |
| Деталь: | Connecting Roller |
| Парткод: | AF02 0564 |
| Деталь: | Transport Roller Gear |
| Парткод: | AB01 1457 |
| Деталь: | DC Solenoid 24V/16.5W |
| Парткод: | B247 2655 |
| Деталь: | Front Support Plate |
| Парткод: | B065 2607 |
| Деталь: | Side Plate: Paper Feed: Front: Peen |
| Парткод: | B247 2605 |
| Деталь: | Side Plate: Paper Feed: Rear: Peen |
| Парткод: | D062 2600 |
| Деталь: | BUSHING - 6MM |
| Парткод: | AA08 0037 |
| Деталь: | Driven Roller Spring |
| Парткод: | AA06 3254 |
| Деталь: | Rubber Cushion - 1x10x10mm |
| Парткод: | A469 2123 |
| Деталь: | Exit Duplex Guide Assy |
| Парткод: | B140 2671 |
| Деталь: | Bushing - 4x5x7 |
| Парткод: | AA08 0034 |
| Деталь: | EXIT ROLLER SPRING |
| Парткод: | B247 2669 |
| Деталь: | Duplex Exit Roller |
| Парткод: | B247 2678 |
| Деталь: | Transport Roller: Right: Driven: Assy |
| Парткод: | B247 2643 |
| Деталь: | Paper Bank Guide Plate Assy |
| Парткод: | B140 2665 |
| Деталь: | Relay Paper Feed Harness |
| Парткод: | B065 2762 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Option Tray Guide Assy |
| Парткод: | B140 2675 |
| Деталь: | Nylon Rivet |
| Парткод: | A048 2838 |
| Деталь: | Open And Close Option Tray Exit Guide |
| Парткод: | B140 2673 |
| Деталь: | CUSHION |
| Парткод: | AA16 2079 |
| Деталь: | Harness: Manual Feed Unit: Assy |
| Парткод: | B247 2764 |
| Деталь: | Gear - 22Z/39Z |
| Парткод: | AB01 7607 |
| Деталь: | Bracket: Tightener: Peen |
| Парткод: | B247 2754 |
| Деталь: | Pulley - 13mm |
| Парткод: | AB03 0722 |
| Деталь: | TENSION SPRING |
| Парткод: | AA06 0722 |
| Деталь: | Front Cover Bracket |
| Парткод: | B477 1841 |
| Деталь: | Rear Cover Bracket |
| Парткод: | B477 1851 |
| Деталь: | Bracket: Pressure: Pickup |
| Парткод: | B652 1822 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B652 1824 |
| Деталь: | Pressure Plate: Pickup |
| Парткод: | B652 1823 |
| Деталь: | Lever: Release: Paper Feed |
| Парткод: | D6091825 |
| Деталь: | SPRING |
| Парткод: | B477 4117 |
| Деталь: | Grip Shaft |
| Парткод: | B4771831 |
| Деталь: | Cover: Paper Feed |
| Парткод: | D6091790 |
| Деталь: | Grip: Cover: Paper Feed |
| Парткод: | D609 4371 |
| Деталь: | Decal: Size: Original |
| Парткод: | D609 4406 |
| Деталь: | Bracket: Pressure Plate: Pull Out |
| Парткод: | D412 2364 |
| Деталь: | BUSHING - 6MM |
| Парткод: | AA08 0037 |
| Деталь: | SPRING |
| Парткод: | B477 4111 |
| Деталь: | Driven Roller: Pull Out: Press Fit |
| Парткод: | D412 2115 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0117 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0107 |
| Деталь: | Arm: Roller: Middle: Driven |
| Парткод: | D412 2553 |
| Деталь: | Compression Spring: Middle |
| Парткод: | D412 2555 |
| Деталь: | Driven Paper Feed Roller |
| Парткод: | B477 2372 |
| Деталь: | Guide: Paper Feed: Upper |
| Парткод: | D609 2347 |
| Деталь: | Harness: Sensor: Paper Size Sensor |
| Парткод: | D412 5900 |
| Деталь: | Photointerruptor: Paper Size Sensor:Document F |
| Парткод: | AW02 0196 |
| Деталь: | Photointerruptor: Paper Size Sensor:Document F |
| Парткод: | AW02 0195 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | A697 2131 |
| Деталь: | Bracket: Paper Size Sensor |
| Парткод: | D412 2523 |
| Деталь: | Pin: Guide Plate: Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Cover: Paper Feed: Upper |
| Парткод: | D609 4711 |
| Деталь: | Discharge Brush: Exit: L45 |
| Парткод: | B652 2516 |
| Деталь: | Sheet: CIS |
| Парткод: | D412 2248 |
| Деталь: | Bracket: Sheet: CIS |
| Парткод: | D412 2246 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Reverse Roller: Paper Feed |
| Парткод: | D541 2241 |
| Деталь: | Torque Limiter Mechanical Clutch: Separator |
| Парткод: | B802 2255 |
| Деталь: | Shaft: Reverse Roller: Sub-Assy |
| Парткод: | D4121632 |
| Деталь: | Ball Bearing - 6x13x5 |
| Парткод: | A859 2230 |
| Деталь: | Sheet: Stay: Reverse Roller |
| Парткод: | D412 2244 |
| Деталь: | Discharge Brush: L11 |
| Парткод: | B477 2622 |
| Деталь: | Bushing - 6x12x4mm |
| Парткод: | A422 1078 |
| Деталь: | Contact Image Sensor: Collar: 600DPI: Assy |
| Парткод: | D609 5870 |
| Деталь: | Roller: Scanning: Exit: Drive |
| Парткод: | B652 2421 |
| Деталь: | Roller: Contact Image Sensor: Exit: Drive |
| Парткод: | D412 2441 |
| Деталь: | Drive Exit Roller |
| Парткод: | B477 2811 |
| Деталь: | Guide Plate: Exit: Upper |
| Парткод: | D609 2825 |
| Деталь: | Discharge Brush: Exit |
| Парткод: | B477 2826 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 01 41 |
| Деталь: | Photointerruptor: GP1A173LCS2F |
| Парткод: | AW02 0203 |
| Деталь: | Development Unit: Assy |
| Парткод: | D062 3051 |
| Деталь: | Developer Type 24 Black |
| Парткод: | B064 9640 |
| Деталь: | Filter Plate |
| Парткод: | B065 3108 |
| Деталь: | Filter: Development |
| Парткод: | D131 3340 |
| Деталь: | Development Filter Case |
| Парткод: | A096 3141 |
| Деталь: | Plate: Filter |
| Парткод: | D062 3108 |
| Деталь: | Filter: Development: M-90 |
| Парткод: | D133 3340 |
| Деталь: | Duct: Development: Assy |
| Парткод: | D133 3045 |
| Деталь: | Development Guide Rail |
| Парткод: | B065 3095 |
| Деталь: | Seal: Drum: Front |
| Парткод: | D062 3099 |
| Деталь: | Seal: Drum: Rear |
| Парткод: | D062 3100 |
| Деталь: | Entrance Seal Assy |
| Парткод: | B1103091 |
| Деталь: | Development Bias Plate |
| Парткод: | B065 3082 |
| Деталь: | Development Knob |
| Парткод: | B065 3071 |
| Деталь: | Gear - 41Z |
| Парткод: | B065 3076 |
| Деталь: | Toner Sensor Guide |
| Парткод: | B065 3065 |
| Деталь: | TONER DENSITY SENSOR |
| Парткод: | B247 5310 |
| Деталь: | Ball Bearing Bracket |
| Парткод: | B065 3079 |
| Деталь: | Gear - 21Z |
| Парткод: | B065 3081 |
| Деталь: | Gear - 20Z |
| Парткод: | B065 3096 |
| Деталь: | Gear - 25Z |
| Парткод: | AB01 3790 |
| Деталь: | Gear - 31Z |
| Парткод: | B065 3073 |
| Деталь: | Gear - 17Z |
| Парткод: | B065 3098 |
| Деталь: | Paper Feed Motor - DC 7.4W |
| Парткод: | B477 3711 |
| Деталь: | Paper Feed Motor Stay |
| Парткод: | B477 3115 |
| Деталь: | Paper Feed Motor Bracket |
| Парткод: | B477 3111 |
| Деталь: | TENSION SPRING |
| Парткод: | AA06 0842 |
| Деталь: | CLAMP |
| Парткод: | B477 4921 |
| Деталь: | Spacer: Reverse Roller: Rear |
| Парткод: | B652 1633 |
| Деталь: | Gear: Z37: Reverse Roller: Front |
| Парткод: | D412 1651 |
| Деталь: | Gear - 31Z |
| Парткод: | B477 3151 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | PULLEY |
| Парткод: | A548 2139 |
| Деталь: | Timing Belt: B40S2M178 |
| Парткод: | B652 1773 |
| Деталь: | Timing Belt: B60S2M212 |
| Парткод: | B652 1613 |
| Деталь: | Pulley - 39Z |
| Парткод: | B301 2141 |
| Деталь: | PULLEY |
| Парткод: | B477 3145 |
| Деталь: | Ball Bearing - 6x13x5 |
| Парткод: | A859 2230 |
| Деталь: | Timing Pulley: T23: S3M |
| Парткод: | D4121661 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Photointerruptor: GP1A173LCS2F |
| Парткод: | AW02 0203 |
| Деталь: | Stopper: Shaft: Separation |
| Парткод: | B477 2244 |
| Деталь: | Gear - 24Z |
| Парткод: | B477 3123 |
| Деталь: | Shaft: Separation: Drive: Input |
| Парткод: | D4121622 |
| Деталь: | Feeler - Pick-up Roller Cam |
| Парткод: | A680 2262 |
| Деталь: | Pick-up Roller Cam |
| Парткод: | B477 3251 |
| Деталь: | Stepper Motor: PM: S2M: T15: Assy |
| Парткод: | B700 5805 |
| Деталь: | Gear: Z20/T21: Input: Rear |
| Парткод: | B477 3144 |
| Деталь: | Timing Belt: B40S3M186 |
| Парткод: | B652 1643 |
| Деталь: | Gear: Z23: Input: Front |
| Парткод: | B477 3147 |
| Деталь: | PULLEY |
| Парткод: | B477 3177 |
| Деталь: | Timing Pulley: T26: S2M |
| Парткод: | D4121662 |
| Деталь: | Timing Belt: B40S2M170 |
| Парткод: | B652 1674 |
| Деталь: | Timing Belt: B40S3M180 |
| Парткод: | B652 1673 |
| Деталь: | Manual Feed Table: Assy |
| Парткод: | D131 2730 |
| Деталь: | Side Fence: Manual Feed: Front: Assy |
| Парткод: | D131 2736 |
| Деталь: | Side Fence: Manual Feed: Rear |
| Парткод: | D131 2735 |
| Деталь: | Decal: Paper Set Direction: Manual Feed |
| Парткод: | D131 2875 |
| Деталь: | MAGNET CATCH |
| Парткод: | AG07 0513 |
| Деталь: | Decal: Side Fence: Manual Feed |
| Парткод: | D131 2876 |
| Деталь: | Support Stay: Manual Feed: Front: Assy |
| Парткод: | D131 2738 |
| Деталь: | Support Stay: Manual Feed: Rear: Assy |
| Парткод: | D131 2740 |
| Деталь: | Feed Guide Gear |
| Парткод: | A096 2780 |
| Деталь: | Gear: Manual Feed Table |
| Парткод: | B098 3492 |
| Деталь: | Sensor bracket |
| Парткод: | B065 2741 |
| Деталь: | Paper size sensor |
| Парткод: | B247 2745 |
| Деталь: | Cover: Manual Feed Table |
| Парткод: | D131 2733 |
| Деталь: | Magnet Catch Bracket |
| Парткод: | B140 2662 |
| Деталь: | Machine Or Copier Paper Feed Cover |
| Парткод: | B140 2660 |
| Деталь: | Sheet - Manual Feed Guide Plate |
| Парткод: | B065 2723 |
| Деталь: | Guide Plate: Manual Feed: Peen |
| Парткод: | B247 2721 |
| Деталь: | Snap Ring |
| Парткод: | 52 062 686 |
| Деталь: | Paper End Feeler |
| Парткод: | B065 2729 |
| Деталь: | Front Shaft - By-pass |
| Парткод: | B065 2743 |
| Деталь: | Paper Feed Unit: Machine or Copier: Assy |
| Парткод: | D131 2550 |
| Деталь: | Fusing Exit Roller |
| Парткод: | AF04 0055 |
| Деталь: | Gear: Fusing Exit |
| Парткод: | AB01 9479 |
| Деталь: | Fusing Cleaning Roller Bracket |
| Парткод: | B140 4198 |
| Деталь: | Pressure Cleaning Roller Spring |
| Парткод: | B140 4200 |
| Деталь: | Bushing: Oil Supply |
| Парткод: | D062 4226 |
| Деталь: | Fusing Cleaning Roller |
| Парткод: | AE04 2066 |
| Деталь: | Sheet: Fiber: Side Plate |
| Парткод: | B065 4129 |
| Деталь: | Side Plate: Fusing: Front: Assy |
| Парткод: | B247 4101 |
| Деталь: | Side Plate: Fusing: Rear: Assy |
| Парткод: | B247 4105 |
| Деталь: | Lever: Front: Assy |
| Парткод: | B247 4323 |
| Деталь: | Lever: Rear: Assy |
| Парткод: | B247 4231 |
| Деталь: | Ball Bearing - 6x15x5 |
| Парткод: | AE03 0055 |
| Деталь: | Sensor Feeler |
| Парткод: | B140 4320 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2117 |
| Деталь: | Gear: Pressuer |
| Парткод: | B247 4264 |
| Деталь: | Pressure Release Eccentric Cam |
| Парткод: | B140 4256 |
| Деталь: | Ball Bearing - 8x16x5 |
| Парткод: | AE03 0056 |
| Деталь: | Harness - Positioning Sensor |
| Парткод: | B140 4498 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0160 |
| Деталь: | Sensor Bracket Assy |
| Парткод: | B140 4258 |
| Деталь: | Lever: Release: Front: Assy |
| Парткод: | B247 4131 |
| Деталь: | Lever: Release: Pressure: Rear: Assy |
| Парткод: | B247 4147 |
| Деталь: | Pressure Tension Spring |
| Парткод: | AA06 0946 |
| Деталь: | Switch Holder |
| Парткод: | B065 4139 |
| Деталь: | Spring Plate - Switch |
| Парткод: | B065 4141 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW20 0010 |
| Деталь: | Development Cover Screw |
| Парткод: | AA14 3810 |
| Деталь: | Lower Fusing Exit Guide |
| Парткод: | B140 4140 |
| Деталь: | Stay: Fusing: Left |
| Парткод: | D131 4114 |
| Деталь: | Shaft: Turn |
| Парткод: | D054 4254 |
| Деталь: | Right Fusing Stay |
| Парткод: | B140 4112 |
| Деталь: | Pressure Oil Supply Roller Bracket |
| Парткод: | B140 4205 |
| Деталь: | Idler Gear |
| Парткод: | AB01 2318 |
| Деталь: | Gear: Drive: Fusing |
| Парткод: | AB01 2328 |
| Деталь: | Duplex Unit: Assy |
| Парткод: | D131 4500 |
| Деталь: | Decal: H-temp Warning: Duplex Unit |
| Парткод: | D131 4797 |
| Деталь: | Inner Cover: Duplex Unit |
| Парткод: | D131 4799 |
| Деталь: | Grip: Release: Duplex Unit: Assy |
| Парткод: | D131 4675 |
| Деталь: | Shaft: Lever: Release |
| Парткод: | B247 4673 |
| Деталь: | Duplex Lock Arm |
| Парткод: | B065 4671 |
| Деталь: | Duplex Release Bracket |
| Парткод: | B065 4675 |
| Деталь: | SPRING |
| Парткод: | AA06 2320 |
| Деталь: | Release Lever Bracket |
| Парткод: | B065 4672 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Upper Duplex Stay |
| Парткод: | B065 4987 |
| Деталь: | Exit Duplex Guide Plate |
| Парткод: | B140 4800 |
| Деталь: | Right Guide Table |
| Парткод: | B065 4726 |
| Деталь: | Spring Plate - Right Table Guide |
| Парткод: | B065 4728 |
| Деталь: | SPRING |
| Парткод: | AA06 6353 |
| Деталь: | Right Duplex Bracket |
| Парткод: | B065 4725 |
| Деталь: | Stepped Screw - M3X4 |
| Парткод: | AA14 3811 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW02 0149 |
| Деталь: | Harness: Connecting: Duplex |
| Парткод: | D131 4590 |
| Деталь: | Right Sensor Bracket |
| Парткод: | B065 4727 |
| Деталь: | Guide Plate: Transport: Lower |
| Парткод: | D062 4730 |
| Деталь: | Spring Plate - Driven Roller |
| Парткод: | B065 4731 |
| Деталь: | DRIVEN ROLLER |
| Парткод: | AF02 2077 |
| Деталь: | Guide Plate Band |
| Парткод: | A096 4928 |
| Деталь: | Compression Spring: Holder: Guide Plate |
| Парткод: | D062 4741 |
| Деталь: | Holder: Pressure: Guide Plate |
| Парткод: | D062 4727 |
| Деталь: | Guide Stopper Roller |
| Парткод: | AF02 2067 |
| Деталь: | Guide Plate Lever Hook |
| Парткод: | D131 4933 |
| Деталь: | Lever: Guide Plate: Adhesion |
| Парткод: | D131 4515 |
| Деталь: | Decal: Lever: Guide Plate |
| Парткод: | D131 4867 |
| Деталь: | SBU Washer |
| Парткод: | B180 1743 |
| Деталь: | Development Connector Bracket |
| Парткод: | B065 2608 |
| Деталь: | Relay Registration Harness |
| Парткод: | B065 2763 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0107 |
| Деталь: | Sensor bracket |
| Парткод: | B065 2621 |
| Деталь: | Case Seal |
| Парткод: | AA15 2441 |
| Деталь: | Paper Dust Removal Case |
| Парткод: | B065 2620 |
| Деталь: | Upper Front Registration Guide |
| Парткод: | B140 2614 |
| Деталь: | Lower Front Registration Guide |
| Парткод: | B140 2622 |
| Деталь: | Paper Feed Stay |
| Парткод: | B065 2682 |
| Деталь: | DC Solenoid 24V |
| Парткод: | B247 2690 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Paper Feed Roller: Feed: Manual Feed |
| Парткод: | AF03 1083 |
| Деталь: | Gear - 18Z |
| Парткод: | AB01 1478 |
| Деталь: | Bushing - M8 |
| Парткод: | AA08 2116 |
| Деталь: | SPRING |
| Парткод: | AA06 0888 |
| Деталь: | Gear - 15T |
| Парткод: | 54 472 706 |
| Деталь: | Pick-up Roller Arm |
| Парткод: | B065 2688 |
| Деталь: | Paper Feed Roller: Pickup |
| Парткод: | AF03 0080 |
| Деталь: | Feed Roller Shaft |
| Парткод: | AA14 0819 |
| Деталь: | SPRING |
| Парткод: | AA06 0887 |
| Деталь: | BUSHING |
| Парткод: | AA08 3019 |
| Деталь: | Magnetic Clutch: 0.53N M: 36Z |
| Парткод: | AX20 0277 |
| Деталь: | Sheet: Guard: Registration Sensor |
| Парткод: | D131 2622 |
| Деталь: | Discharge Brush: Paper Feed Unit: Registration |
| Парткод: | D131 2620 |
| Деталь: | Sponge: Registration Sensor: Guard |
| Парткод: | D131 2615 |
| Деталь: | Harness - Front |
| Парткод: | B247 4149 |
| Деталь: | Rear Harness |
| Парткод: | B065 4151 |
| Деталь: | Electrode Plate: Thermostat: Coupling |
| Парткод: | B110 4223 |
| Деталь: | Thermostat Electrode Plate |
| Парткод: | B140 4169 |
| Деталь: | Thermostat- 211c |
| Парткод: | AW11 0066 |
| Деталь: | Thermostat-192c |
| Парткод: | AW11 0064 |
| Деталь: | Housing: Thermostat: EXP |
| Парткод: | B247 4128 |
| Деталь: | Bracket: Thermostat |
| Парткод: | B140 4145 |
| Деталь: | Bracket: Thermistor: Middle |
| Парткод: | D062 4197 |
| Деталь: | Bracket: Thermistor: Inner Back |
| Парткод: | D062 4196 |
| Деталь: | Thermistor: Fusing: Middle |
| Парткод: | AW10 0131 |
| Деталь: | Thermistor: Fusing: Inner Back |
| Парткод: | AW10 0132 |
| Деталь: | Plate: Thermistor |
| Парткод: | B140 4179 |
| Деталь: | SPRING |
| Парткод: | AA06 0894 |
| Деталь: | Exit Plate |
| Парткод: | B065 4185 |
| Деталь: | Upper Stay |
| Парткод: | B247 4142 |
| Деталь: | Front Heater Holder |
| Парткод: | B140 4171 |
| Деталь: | Rear Heater Holder |
| Парткод: | B140 4170 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | A413 1670 |
| Деталь: | Retaining Rings-C: Hot Roller |
| Парткод: | D054 4172 |
| Деталь: | Thermal Insulating Bushing: DIA34 |
| Парткод: | AE03 2033 |
| Деталь: | Ball Bearing - 40x52x7 |
| Парткод: | AE03 0054 |
| Деталь: | Gear: Hot Roller |
| Парткод: | AB01 2062 |
| Деталь: | Connector - 3P |
| Парткод: | A247 4249 |
| Деталь: | Harness Plate |
| Парткод: | B140 4159 |
| Деталь: | Drawer Bracket Assy |
| Парткод: | B140 4157 |
| Деталь: | Connector Cover Bracket |
| Парткод: | B140 4167 |
| Деталь: | Harness: Fusing Unit: NA |
| Парткод: | B140 4162 |
| Деталь: | Harness: Fusing Unit: EU |
| Парткод: | B140 4164 |
| Деталь: | Heater: 120V: 650W (NA) |
| Парткод: | AX44 0305 |
| Деталь: | Heater: 230V: 650W (EU) |
| Парткод: | AX44 0307 |
| Деталь: | Heater: 120V: 550W (NA) |
| Парткод: | AX44 0304 |
| Деталь: | Heater: 230V: 550W (EU) |
| Парткод: | AX44 0306 |
| Деталь: | Ball Bearing - 8x19x6 |
| Парткод: | AE03 0053 |
| Деталь: | Pressure Roller: DIA40 |
| Парткод: | AE02 0209 |
| Деталь: | Hot Roller: MM40 |
| Парткод: | AE01 1117 |
| Деталь: | CHARGE CORONA UNIT |
| Парткод: | B247 2010 |
| Деталь: | Drum Shaft Knob |
| Парткод: | B247 2410 |
| Деталь: | Development Drum Stay |
| Парткод: | B065 3258 |
| Деталь: | Front bushing |
| Парткод: | AA08 0147 |
| Деталь: | Bushing: Screw Shaft: Rear |
| Парткод: | B140 2291 |
| Деталь: | Wire Cleaner Slider |
| Парткод: | A096 2062 |
| Деталь: | Corona Wire Cleaner |
| Парткод: | A096 2063 |
| Деталь: | Slider Ring |
| Парткод: | A096 2065 |
| Деталь: | Screw Shaft |
| Парткод: | A176 2061 |
| Деталь: | Cushion - Spacer |
| Парткод: | B247 2295 |
| Деталь: | Cleaner Motor Cover |
| Парткод: | B070 2365 |
| Деталь: | GROUNDING PLATE |
| Парткод: | A176 2054 |
| Деталь: | DC Motor: Cleaner: 0.5W |
| Парткод: | AX04 0147 |
| Деталь: | Gear - 20Z |
| Парткод: | AB01 0087 |
| Деталь: | Front End Block |
| Парткод: | AD02 2283 |
| Деталь: | Rear End Block |
| Парткод: | AD02 2285 |
| Деталь: | PRESSURE SPRING |
| Парткод: | AA06 2284 |
| Деталь: | Charge Corona Wire |
| Парткод: | B070 2364 |
| Деталь: | Charge Terminal Spring |
| Парткод: | AA06 3248 |
| Деталь: | Grid Terminal Spring |
| Парткод: | AA06 3249 |
| Деталь: | Cushion - Wire |
| Парткод: | B234 2123 |
| Деталь: | Cover - Front End Block |
| Парткод: | AD02 2306 |
| Деталь: | Cover - Rear End Block |
| Парткод: | AD02 2307 |
| Деталь: | TERMINAL PLATE |
| Парткод: | A134 2363 |
| Деталь: | Front Grid Anchor |
| Парткод: | A096 2052 |
| Деталь: | Rear Grid Anchor |
| Парткод: | A096 2051 |
| Деталь: | Grid: Charge Corona: N |
| Парткод: | A096 2060 |
| Деталь: | Imaging Unit: Assy |
| Парткод: | D062 1852 |
| Деталь: | Harness: LVDS: LDB |
| Парткод: | D131 5403 |
| Деталь: | Harness: Laser Diode Control: Power Source |
| Парткод: | D062 5437 |
| Деталь: | Laser Diode Unit: Assy |
| Парткод: | D062 1859 |
| Деталь: | Aperture |
| Парткод: | D062 1908 |
| Деталь: | Spacer: Laser Diode Unit: 25micron |
| Парткод: | B070 1921 |
| Деталь: | Spacer: Laser Diode Unit: 50micron |
| Парткод: | B0701922 |
| Деталь: | Spacer: Laser Diode Unit: 75micron |
| Парткод: | B0701923 |
| Деталь: | Spacer: Laser Diode Unit: 100micron |
| Парткод: | B0701924 |
| Деталь: | Plate: Lens: L0 |
| Парткод: | D062 1912 |
| Деталь: | Lens: Cylindrical Lens |
| Парткод: | AC02 4019 |
| Деталь: | Plate: Harness: LVDS |
| Парткод: | D062 1904 |
| Деталь: | Mirror: No.1 |
| Парткод: | AC03 0175 |
| Деталь: | 1st Mirror Holder |
| Парткод: | B065 1915 |
| Деталь: | Harness: DC Polygon Mirror Motor |
| Парткод: | D062 5412 |
| Деталь: | Motor Control Board: DC Polygon Mirror Motor |
| Парткод: | D062 5271 |
| Деталь: | DC Polygon Mirror Motor: Assy |
| Парткод: | AX06 0382 |
| Деталь: | Seal: Lens: L1 |
| Парткод: | B065 1955 |
| Деталь: | Shield Glass |
| Парткод: | AC01 5037 |
| Деталь: | Supporting Plate |
| Парткод: | G570 2827 |
| Деталь: | Lens Holder - L2 Right |
| Парткод: | B065 1925 |
| Деталь: | Lens Holder - L2 Left |
| Парткод: | B065 1926 |
| Деталь: | DTL |
| Парткод: | GC02 5010 |
| Деталь: | 2nd Mirror Holder |
| Парткод: | B065 1930 |
| Деталь: | Middle Mirror Holder |
| Парткод: | B065 1932 |
| Деталь: | Mirror: No.2 |
| Парткод: | AC03 0176 |
| Деталь: | PCB: Sync Detector Board |
| Парткод: | D054 5330 |
| Деталь: | Seal - Shield Glass Holder |
| Парткод: | B065 1946 |
| Деталь: | Shield Glass Holder |
| Парткод: | B065 1944 |
| Деталь: | Seal - Shield Glass |
| Парткод: | B065 1945 |
| Деталь: | Shield Glass Rail |
| Парткод: | B065 1940 |
| Деталь: | Lens L1 |
| Парткод: | GC02 5009 |
| Деталь: | Transfer Belt Cleaning Blade |
| Парткод: | AD04 1126 |
| Деталь: | Spring Plate |
| Парткод: | B065 3962 |
| Деталь: | LEVER SHAFT |
| Парткод: | B247 3965 |
| Деталь: | LEVER |
| Парткод: | B065 3963 |
| Деталь: | BUSHING |
| Парткод: | B065 3964 |
| Деталь: | Shaft - On-off |
| Парткод: | B247 3961 |
| Деталь: | SPRING |
| Парткод: | AA06 3877 |
| Деталь: | Cleaning Roller: Transfer Belt: Assy |
| Парткод: | D062 3925 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2024 |
| Деталь: | Toner Collection Coil |
| Парткод: | B247 3911 |
| Деталь: | Exit Seal |
| Парткод: | AD04 7025 |
| Деталь: | TAPE |
| Парткод: | A229 3934 |
| Деталь: | Entrance Guide Plate |
| Парткод: | B065 3955 |
| Деталь: | Toner Collection Gear Coil |
| Парткод: | B065 3918 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Agitator |
| Парткод: | B247 3914 |
| Деталь: | Cleaning Roller Terminal |
| Парткод: | B065 3928 |
| Деталь: | Front bushing |
| Парткод: | A229 3910 |
| Деталь: | Electrode Plate Cover |
| Парткод: | B065 3922 |
| Деталь: | Idle Gear - 1 |
| Парткод: | B065 3920 |
| Деталь: | Idle Gear - 2 |
| Парткод: | B065 3921 |
| Деталь: | Rear bushing |
| Парткод: | A229 3911 |
| Деталь: | Cam Gear - 37z |
| Парткод: | AB01 4176 |
| Деталь: | Bushing - 6x10x9mm |
| Парткод: | AA08 2058 |
| Деталь: | Power Pack |
| Парткод: | AZ32 0164 |
| Деталь: | Harness - Transfer Unit |
| Парткод: | B247 3976 |
| Деталь: | DC Solenoid: On-off: MC4: Assy |
| Парткод: | D062 3966 |
| Деталь: | DC Solenoid: On-off: MC4: Type-e: Assy |
| Парткод: | D066 3966 |
| Деталь: | Casing: Transfer Unit: Assy |
| Парткод: | B247 3905 |
| Деталь: | Safety Switch Lever |
| Парткод: | B065 5041 |
| Деталь: | Bracket: Safety Switch |
| Парткод: | D131 5812 |
| Деталь: | Harness: Switch: Laser Diode |
| Парткод: | D131 5430 |
| Деталь: | Receiving Tray - Operation Panel |
| Парткод: | B065 1320 |
| Деталь: | Safety Switch Harness Cover |
| Парткод: | B065 5816 |
| Деталь: | Bracket: Main Switch: C5 |
| Парткод: | D131 5715 |
| Деталь: | Duct - Fusing |
| Парткод: | B065 1188 |
| Деталь: | Filter - Toner |
| Парткод: | B070 2114 |
| Деталь: | Duct - Charge |
| Парткод: | B065 1185 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 1845 |
| Деталь: | Screw: M4: Exterior |
| Парткод: | AA14 3801 |
| Деталь: | Toner Bottle Cam |
| Парткод: | B065 3266 |
| Деталь: | Inner Back Cam |
| Парткод: | B065 3267 |
| Деталь: | Upper Hinge Guide Plate |
| Парткод: | B065 1328 |
| Деталь: | Turret Spring |
| Парткод: | AA06 3052 |
| Деталь: | Hinge Shaft |
| Парткод: | B132 1463 |
| Деталь: | Duct: Image Forming Section: Gate: Assy |
| Парткод: | D062 1179 |
| Деталь: | Duct: Image Forming Section: Main: Assy |
| Парткод: | D062 1175 |
| Деталь: | Duct: Toner Bottle |
| Парткод: | D062 1177 |
| Деталь: | Frame: Front |
| Парткод: | B132 1666 |
| Деталь: | Frame: Rear |
| Парткод: | D014 1667 |
| Деталь: | Drive Wire: Scanner |
| Парткод: | B132 1729 |
| Деталь: | Bracket: Tension |
| Парткод: | B132 1724 |
| Деталь: | Bracket: Tension: Fix |
| Парткод: | B132 1725 |
| Деталь: | Bracket: Tension: Inner Back: Peen |
| Парткод: | D014 1722 |
| Деталь: | Spring: Drive Were |
| Парткод: | B132 1723 |
| Деталь: | Bracket: Motor |
| Парткод: | D062 1707 |
| Деталь: | Bracket: Pulley |
| Парткод: | B132 1671 |
| Деталь: | Decal - LD 655 |
| Парткод: | AA00 0217 |
| Деталь: | Screw: Mechanical Drive Section |
| Парткод: | B132 1719 |
| Деталь: | Pulley: Drive: Front: Assy |
| Парткод: | D062 1708 |
| Деталь: | Pulley: Drive: Rear: Assy |
| Парткод: | D062 1709 |
| Деталь: | Timing Belt: 100S2M266 |
| Парткод: | AA04 3314 |
| Деталь: | Pulley: 40T |
| Парткод: | B132 1720 |
| Деталь: | Screw: 6x1.7 |
| Парткод: | AA14 3802 |
| Деталь: | Pulley: Tension: Timing Belt: Assy |
| Парткод: | B132 1710 |
| Деталь: | PRESSURE SPRING |
| Парткод: | G029 4150 |
| Деталь: | Cushion - Stepper Motor |
| Парткод: | A1341724 |
| Деталь: | Stepper Motor: DC1.98V 7.13W |
| Парткод: | D014 1703 |
| Деталь: | Cover: Damper |
| Парткод: | B132 1714 |
| Деталь: | Spring Plate: Ground Plate: ADF |
| Парткод: | B132 1898 |
| Деталь: | Sheet - Photointerrupter |
| Парткод: | A267 1820 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Decal: Cover |
| Парткод: | D131 1366 |
| Деталь: | Cover: Left Upper |
| Парткод: | D131 1304 |
| Деталь: | Cover: Left Upper: NA: Assy |
| Парткод: | D1321246 |
| Деталь: | Cover: Left Lower |
| Парткод: | D131 1334 |
| Деталь: | Tank: Discharge Used Toner |
| Парткод: | B065 3690 |
| Деталь: | Tank Seal |
| Парткод: | AA15 2315 |
| Деталь: | Large Cap - Toner Collection Tank |
| Парткод: | A007 3751 |
| Деталь: | Caution Decal - English |
| Парткод: | AA00 0059 |
| Деталь: | Ratch |
| Парткод: | A096 3712 |
| Деталь: | Toner Collection Bottle Bracket |
| Парткод: | B065 3689 |
| Деталь: | Cover: Rear Upper |
| Парткод: | D131 1305 |
| Деталь: | Sheet: Duct: Cover |
| Парткод: | D062 1354 |
| Деталь: | Decal: Caption: Interface |
| Парткод: | D131 1376 |
| Деталь: | Ozone Filter: Main: Exhaust |
| Парткод: | D131 1233 |
| Деталь: | Duct: Cover: Exhaust |
| Парткод: | D131 1336 |
| Деталь: | Seal: Fan: Exhaust: Adhesion |
| Парткод: | B247 1250 |
| Деталь: | Duct Holder |
| Парткод: | A2931332 |
| Деталь: | Machine Or Copier Filter |
| Парткод: | AA01 2128 |
| Деталь: | Louver: Filter |
| Парткод: | D131 1332 |
| Деталь: | Bracket: Cover: Rear Lower |
| Парткод: | D131 1356 |
| Деталь: | Cover: Right Upper |
| Парткод: | D131 1302 |
| Деталь: | Cover: Right Upper: NA |
| Парткод: | D1321302 |
| Деталь: | Cap: Connector |
| Парткод: | D131 1341 |
| Деталь: | Cap: G4 |
| Парткод: | D131 1344 |
| Деталь: | Cover: LCT (EU/AA) |
| Парткод: | D131 1303 |
| Деталь: | Cover: LCT: NA |
| Парткод: | D132 1303 |
| Деталь: | Cover: Right Lower |
| Парткод: | D131 1333 |
| Деталь: | Cap: Coupling |
| Парткод: | D131 1342 |
| Деталь: | Cover: Rear Lower |
| Парткод: | D131 1306 |
| Деталь: | Cover: Rear Lower: NA |
| Парткод: | D131 1318 |
| Деталь: | Shoulder Screw - M3 |
| Парткод: | AA14 3523 |
| Деталь: | Pickoff Pawl: Drum: Assy |
| Парткод: | B065 2336 |
| Деталь: | Nut - 2.4mm |
| Парткод: | G020 3566 |
| Деталь: | Ring - Transport Bracket |
| Парткод: | A048 2276 |
| Деталь: | Pick-off Pawl Holder |
| Парткод: | B065 2337 |
| Деталь: | Pick-off Pawl Spring |
| Парткод: | AA06 0892 |
| Деталь: | Pick-off Pawl |
| Парткод: | AD02 5024 |
| Деталь: | Pick-off Pawl Cam |
| Парткод: | AB01 7611 |
| Деталь: | CLEANING BLADE |
| Парткод: | AD04 1140 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2208 |
| Деталь: | Spring - 4060mN |
| Парткод: | AA06 3610 |
| Деталь: | Front Blade Seal |
| Парткод: | B065 2316 |
| Деталь: | Rear Blade Seal |
| Парткод: | B065 2317 |
| Деталь: | Bracket: Blade: Assy |
| Парткод: | B247 2314 |
| Деталь: | BUSHING |
| Парткод: | AA08 2120 |
| Деталь: | Middle PCU Casing |
| Парткод: | B065 2386 |
| Деталь: | Spring Plate: Brush Roller |
| Парткод: | D062 2388 |
| Деталь: | Holder: Spring Plate: Brush Roller |
| Парткод: | D062 2389 |
| Деталь: | Shaft: Pickoff Pawl: Swivel |
| Парткод: | B247 2342 |
| Деталь: | Toner Collection Coil Gear |
| Парткод: | AB01 1459 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Density Sensor P |
| Парткод: | B234 2279 |
| Деталь: | Harness: PCU: Lower |
| Парткод: | B247 2497 |
| Деталь: | Pick-off Pawl Positioning Plate |
| Парткод: | B065 2364 |
| Деталь: | Entrance Seal Holder |
| Парткод: | B065 2361 |
| Деталь: | Entrance Seal: Cleaning: Assy |
| Парткод: | D131 2362 |
| Деталь: | Bracket: Idler: Pickoff Pawl: Assy |
| Парткод: | B247 2344 |
| Деталь: | Idler Gear |
| Парткод: | AB01 1460 |
| Деталь: | SPRING |
| Парткод: | AA06 3576 |
| Деталь: | Screw - M3 |
| Парткод: | AA14 3544 |
| Деталь: | Grounding Plate - Entrance Seal |
| Парткод: | B065 2369 |
| Деталь: | Bracket Grounding Bracket |
| Парткод: | B065 2358 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 2381 |
| Деталь: | Toner Collection Coil Bushing |
| Парткод: | AA08 2121 |
| Деталь: | Bottle: Drive: Assy |
| Парткод: | D131 3301 |
| Деталь: | Gear: Toner Bottle: Assy |
| Парткод: | B065 3306 |
| Деталь: | Shield Plate - Toner Bottle |
| Парткод: | A293 3234 |
| Деталь: | Toner Bottle Chuck |
| Парткод: | A293 3230 |
| Деталь: | Toner Slider |
| Парткод: | A293 3227 |
| Деталь: | Flat Screw: Chuck: Bottle |
| Парткод: | AA14 3816 |
| Деталь: | SCREW |
| Парткод: | B247 3331 |
| Деталь: | Chuck Roller |
| Парткод: | A229 3232 |
| Деталь: | Shaft: Chuck |
| Парткод: | B247 3345 |
| Деталь: | Chuck Spring |
| Парткод: | AA06 3366 |
| Деталь: | Seal - Toner Bottle |
| Парткод: | A134 3192 |
| Деталь: | Toner Bottle Stopper |
| Парткод: | A293 3220 |
| Деталь: | SPRING |
| Парткод: | B247 3330 |
| Деталь: | Pawl: Toner Bottle: Fix |
| Парткод: | D131 3282 |
| Деталь: | Bottle Roller |
| Парткод: | A096 3224 |
| Деталь: | Decal: Toner Supply |
| Парткод: | D131 3306 |
| Деталь: | Shield Holder |
| Парткод: | A293 3231 |
| Деталь: | SPRING |
| Парткод: | AA06 0291 |
| Деталь: | Spacer - M6 |
| Парткод: | AA13 2024 |
| Деталь: | Motor Joint Gear |
| Парткод: | A229 3243 |
| Деталь: | Toner Bottle Joint Gear |
| Парткод: | A229 3242 |
| Деталь: | DC Motor: Toner Bottle: DC24V 5.85W |
| Парткод: | B247 5312 |
| Деталь: | Toner Bottle Drive Bracket |
| Парткод: | B065 3309 |
| Деталь: | Shaft: Idler: Drive: Toner Bottle |
| Парткод: | B247 3332 |
| Деталь: | Decal: Toner Supply Sub-unit: EXP |
| Парткод: | D131 1383 |
| Деталь: | Bracket: Turn: Toner Bottle: Sub-assy |
| Парткод: | B247 3311 |
| Деталь: | Rubber Bushing - Toner Supply Unit |
| Парткод: | A229 3219 |
| Деталь: | Shutter Cover |
| Парткод: | A229 3285 |
| Деталь: | Shutter Lever |
| Парткод: | A229 3264 |
| Деталь: | Upper Shutter Shield |
| Парткод: | A229 3266 |
| Деталь: | Inner Shutter |
| Парткод: | A229 3262 |
| Деталь: | Outer Shutter |
| Парткод: | A229 3261 |
| Деталь: | Outer Shutter Shield |
| Парткод: | A229 3263 |
| Деталь: | Contact Point Stay - Upper |
| Парткод: | B247 3273 |
| Деталь: | Contact Point Stay - Lower |
| Парткод: | B247 3271 |
| Деталь: | Bracket: Hinge: Open And Close: Assy |
| Парткод: | B247 3316 |
| Деталь: | External Circlip - Mm8 |
| Парткод: | A222 2724 |
| Деталь: | Toner Catchpan Bottle |
| Парткод: | B247 3258 |
| Деталь: | Guide: Scanning: Entrance: Assy |
| Парткод: | D609 2581 |
| Деталь: | Bushing- 4x8x4.5mm |
| Парткод: | 53 241 658 |
| Деталь: | SPACER |
| Парткод: | A374 21 81 |
| Деталь: | Entrance Scanning Roller Shaft |
| Парткод: | B477 2575 |
| Деталь: | Tension Spring: Scanning: Entrance |
| Парткод: | D412 2578 |
| Деталь: | Driven Roller: Scanning: Entrance |
| Парткод: | D412 2577 |
| Деталь: | Seal - 0.7x13x20 |
| Парткод: | A422 1063 |
| Деталь: | Entrance Scanning Base |
| Парткод: | B477 2561 |
| Деталь: | Registration Sensor Bracket |
| Парткод: | B477 2665 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0117 |
| Деталь: | Roller: Middle: Drive |
| Парткод: | D412 2121 |
| Деталь: | Roller: Scanning: Entrance: Drive |
| Парткод: | B652 2411 |
| Деталь: | Roller: Pull Out: Drive |
| Парткод: | D412 2111 |
| Деталь: | Bushing - 16x18x5 |
| Парткод: | AA08 2141 |
| Деталь: | Screw: Safety |
| Парткод: | AA14 3791 |
| Деталь: | Bracket: Guide: Paper Feed: Lower |
| Парткод: | D609 2145 |
| Деталь: | Discharge Brush: L228 |
| Парткод: | D412 2475 |
| Деталь: | Discharge Brush: L82 |
| Парткод: | D412 2474 |
| Деталь: | Guide Plate: Scanning: Entrance: Assy |
| Парткод: | D609 2471 |
| Деталь: | Screw: Contact Point |
| Парткод: | AA14 3790 |
| Деталь: | Guide: Paper Feed: Lower |
| Парткод: | D412 2252 |
| Деталь: | Separation Cap |
| Парткод: | B477 2151 |
| Деталь: | Snap Ring |
| Парткод: | 52 062 686 |
| Деталь: | Roller: Guide: Middle |
| Парткод: | D412 2255 |
| Деталь: | Separation Support Pad |
| Парткод: | B301 1155 |
| Деталь: | Holder: Separation Pad |
| Парткод: | B652 2146 |
| Деталь: | Arm: Roller: Scanning: Entrance |
| Парткод: | B477 2574 |
| Деталь: | Shaft: Roller: Guide: Middle |
| Парткод: | D412 2256 |
| Деталь: | Discharge Brush: L11 |
| Парткод: | B477 2622 |
| Деталь: | SADF: Assy |
| Парткод: | D131 7700 |
| Деталь: | SADF: DOM: MON-C: Assy |
| Парткод: | D131 7701 |
| Деталь: | STEPPED SCREW |
| Парткод: | A859 7211 |
| Деталь: | Decal: Misfeed Removal: Lever |
| Парткод: | D609 4408 |
| Деталь: | Cover: Front |
| Парткод: | D609 4612 |
| Деталь: | Cover: Rear |
| Парткод: | D609 4511 |
| Деталь: | Pressure Plate: Assy |
| Парткод: | D412 4911 |
| Деталь: | Cover: Lower |
| Парткод: | D6091922 |
| Деталь: | Pressure Plate Tape |
| Парткод: | B477 2715 |
| Деталь: | Screw - M3X5 |
| Парткод: | AA14 3555 |
| Деталь: | Bushing- Exit Driven Roller |
| Парткод: | A859 4836 |
| Деталь: | SPRING |
| Парткод: | B477 4131 |
| Деталь: | DRIVEN EXIT ROLLER |
| Парткод: | B477 2861 |
| Деталь: | Tray: Exit |
| Парткод: | D609 4811 |
| Деталь: | Cover: Upper |
| Парткод: | D609 4713 |
| Деталь: | Transfer Unit: Assy |
| Парткод: | D131 3855 |
| Деталь: | Transfer Unit: D133: Assy |
| Парткод: | D133 3856 |
| Деталь: | Transfer Unit Guide Plate |
| Парткод: | B065 3818 |
| Деталь: | Brush: Flat Belt-transfer: Assy |
| Парткод: | D066 3984 |
| Деталь: | Cover: Electrode Plate |
| Парткод: | D066 3990 |
| Деталь: | Toner Collection Gear |
| Парткод: | B065 3873 |
| Деталь: | Front Arm |
| Парткод: | A229 3861 |
| Деталь: | Rear Arm |
| Парткод: | A229 3862 |
| Деталь: | Drive Electrode |
| Парткод: | A229 3875 |
| Деталь: | Transfer Belt - Mojito Service |
| Парткод: | A293 3899 |
| Деталь: | DRIVE ROLLER |
| Парткод: | B247 3866 |
| Деталь: | Transfer Unit Joint |
| Парткод: | B065 3872 |
| Деталь: | Bias Roller |
| Парткод: | B247 3870 |
| Деталь: | TERMINAL |
| Парткод: | B065 3875 |
| Деталь: | ELECTRODE PLATE |
| Парткод: | B065 3874 |
| Деталь: | PRESSURE ARM |
| Парткод: | B065 3868 |
| Деталь: | Transport Driven Roller |
| Парткод: | A229 3865 |
| Деталь: | Electrode: Bias |
| Парткод: | B247 3980 |
| Деталь: | Bias Terminal |
| Парткод: | B065 3878 |
| Деталь: | Electrode: Bias: Transfer: Assy |
| Парткод: | D066 3988 |
| Деталь: | Guide Plate: Transfer/Separation Unit: Vapor Deposition |
| Парткод: | D131 3951 |
| Деталь: | Bracket: Earth |
| Парткод: | D131 3950 |
| Деталь: | Electrode Plate: Flat Belt-transfer |
| Парткод: | D131 3949 |
| Деталь: | Holder: Entrance Seal: Assy |
| Парткод: | D131 3945 |
| Деталь: | Guide Plate Spring |
| Парткод: | AA06 3310 |
| Деталь: | Stepped Screw - Locking |
| Парткод: | H053 1150 |
| Деталь: | Brushless Motor: Development Unit: 90: Assy |
| Парткод: | D062 5325 |
| Деталь: | Brushless Motor: Development Drive Unit: Assy |
| Парткод: | D131 3326 |
| Деталь: | Stepper Motor: MM56x54: DC 36W |
| Парткод: | B247 1028 |
| Деталь: | Motor Cushion |
| Парткод: | AA16 1122 |
| Деталь: | Bracket: Stepper Motor |
| Парткод: | D054 1132 |
| Деталь: | Timing Belt - S2M114 |
| Парткод: | AA04 3269 |
| Деталь: | Gear - 21Z/24T |
| Парткод: | AB01 7449 |
| Деталь: | Base: Stepper Motor: Assy |
| Парткод: | B247 1133 |
| Деталь: | Tension Spring: 7.75N |
| Парткод: | B247 1027 |
| Деталь: | Pulley - 81Z |
| Парткод: | AB03 0427 |
| Деталь: | Ring - 55 |
| Парткод: | A229 1135 |
| Деталь: | Fusing Drive Bracket |
| Парткод: | B065 1168 |
| Деталь: | Shaft: Fusing Drive Sub-unit |
| Парткод: | D131 1136 |
| Деталь: | Spring - 21.6mm |
| Парткод: | AA06 3490 |
| Деталь: | Fusing Drive Sub-unit Joint |
| Парткод: | B140 1173 |
| Деталь: | Bracket: Toner Recycling: Assy |
| Парткод: | B247 1157 |
| Деталь: | Bracket: Toner Recycling |
| Парткод: | G148 1157 |
| Деталь: | Toner Recycling Tightener |
| Парткод: | B065 1160 |
| Деталь: | SPRING |
| Парткод: | AA06 6651 |
| Деталь: | TIMING BELT |
| Парткод: | AA04 3946 |
| Деталь: | DC Brushless Motor: Drive: Fusing/Paper Exit Unit: Assy |
| Парткод: | B247 1044 |
| Деталь: | Pulley - 89Z |
| Парткод: | AB03 0725 |
| Деталь: | Duplex Drive Bracket |
| Парткод: | A293 1155 |
| Деталь: | Duplex Drive Joint |
| Парткод: | B065 1167 |
| Деталь: | Shaft: Drive: Duplex: Assy |
| Парткод: | B247 1166 |
| Деталь: | Terminal: Development Roller |
| Парткод: | G178 3232 |
| Деталь: | Slide Rail: Paper Tray: Left: Sub-assy |
| Парткод: | D062 6246 |
| Деталь: | Spring: Paper Tray: Lock |
| Парткод: | D059 6591 |
| Деталь: | Tray Lock Arm |
| Парткод: | B065 6136 |
| Деталь: | Block: Positioning: Paper Tray |
| Парткод: | D062 6610 |
| Деталь: | Base: Slide Rail: No.3: Peen |
| Парткод: | B247 6783 |
| Деталь: | Shield: Frame: Paper Bank: Upper |
| Парткод: | B098 6693 |
| Деталь: | Slide Rail: Right: Assy |
| Парткод: | D062 6280 |
| Деталь: | Bracket: Holder: Assy |
| Парткод: | B247 6062 |
| Деталь: | Caster: 1470N: DIA60 |
| Парткод: | AH01 2040 |
| Деталь: | Flanged Hexagonal Head Bolt: Caster |
| Парткод: | AA14 3803 |
| Деталь: | Hexagonal Bolt: M12x35 |
| Парткод: | AA14 3798 |
| Деталь: | Side Plate - Paper Tray |
| Парткод: | B065 6191 |
| Деталь: | Heat Sink: Heater: Lower: Sub-assy |
| Парткод: | B140 6221 |
| Деталь: | Heat Sink: Heater: Lower: EU: Assy |
| Парткод: | B140 6226 |
| Деталь: | Heater: 115V: 18W: Upper |
| Парткод: | AX40 0176 |
| Деталь: | Heater: 240V: 18W: Upper |
| Парткод: | AX40 0178 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0010 |
| Деталь: | Bracket: Sensor: Paper Size Sensor: Moveable |
| Парткод: | D059 6152 |
| Деталь: | Screw - 8x14x2.8 |
| Парткод: | AA14 0912 |
| Деталь: | Harness - Paper Size Sensor |
| Парткод: | B247 6800 |
| Деталь: | Spring Plate: Bracket: Sensor: Paper Tray |
| Парткод: | D059 6153 |
| Деталь: | SCREW |
| Парткод: | AA14 3569 |
| Деталь: | Bracket: Positioning: Paper Tray: Assy |
| Парткод: | B247 6174 |
| Деталь: | Holder: Stopper: Tandem LCT |
| Парткод: | D062 6859 |
| Деталь: | Holder: Stopper: Paper Tray |
| Парткод: | D062 6458 |
| Деталь: | Cleaning Unit: Hot Roller: Assy (D131/D132) |
| Парткод: | D062 4098 |
| Деталь: | Cleaning Unit: Hot Roller: Assy (D133) |
| Парткод: | D066 4202 |
| Деталь: | Inner Cover: Fusing/Paper Exit Unit |
| Парткод: | D131 4268 |
| Деталь: | Inner Cover: Fusing/Paper Exit Unit |
| Парткод: | D133 4278 |
| Деталь: | Decal: Exit |
| Парткод: | D131 4481 |
| Деталь: | Decal: Misfeed Removal: D1/E1: EXP |
| Парткод: | D131 4274 |
| Деталь: | Heat Insulation: Inner Cover: Fusing/Paper Exit |
| Парткод: | D131 4255 |
| Деталь: | Decal: Knob: Fusing |
| Парткод: | D131 4167 |
| Деталь: | Knob: Fusing |
| Парткод: | AG05 0104 |
| Деталь: | Web Cover |
| Парткод: | B065 4231 |
| Деталь: | Bracket: Guard: Feeler |
| Парткод: | D062 4232 |
| Деталь: | Brake pad |
| Парткод: | B065 4247 |
| Деталь: | Brake Spring Plate |
| Парткод: | B140 4190 |
| Деталь: | DC Motor: Cleaning |
| Парткод: | AX04 0187 |
| Деталь: | Motor Plate Bracket |
| Парткод: | B065 4225 |
| Деталь: | Bracket: Drive: Assy (D131/D132) |
| Парткод: | B247 4188 |
| Деталь: | Bracket: Drive (D133) |
| Парткод: | G148 4226 |
| Деталь: | Gear - 37Z |
| Парткод: | B065 4222 |
| Деталь: | GEAR |
| Парткод: | B065 4241 |
| Деталь: | Motor Gear |
| Парткод: | B065 4223 |
| Деталь: | Gear - 50Z |
| Парткод: | B065 4238 |
| Деталь: | Bushing: DIA6 |
| Парткод: | D062 4236 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Web Harness |
| Парткод: | B065 4248 |
| Деталь: | Web Idle Gear (D133) |
| Парткод: | B065 4235 |
| Деталь: | Gear: Idler: Cleaning Unit (D131/D132) |
| Парткод: | B247 4235 |
| Деталь: | Stopper Gear (D133) |
| Парткод: | B065 4234 |
| Деталь: | Gear: Stopper: Oil Supply Roller (D131/D132) |
| Парткод: | B247 4234 |
| Деталь: | PRESSURE SPRING |
| Парткод: | AA06 3851 |
| Деталь: | FEELER SPRING |
| Парткод: | B065 4221 |
| Деталь: | Web End Feeler (D133) |
| Парткод: | B065 4219 |
| Деталь: | Feeler: Oil End Sensor (D131/D132) |
| Парткод: | B140 4195 |
| Деталь: | Positioning Plate - Web Unit (D133) |
| Парткод: | B065 4251 |
| Деталь: | Cleaning Unit Drive Positioning Plate (D131/D132) |
| Парткод: | B140 4187 |
| Деталь: | Gear - 23Z (D133) |
| Парткод: | B065 4244 |
| Деталь: | Gear: Z23: Oil Supply Roller (D131/D132) |
| Парткод: | B247 4244 |
| Деталь: | Shaft: Drive: Rolling: Assy |
| Парткод: | B247 4242 |
| Деталь: | Shaft: Drive: Oil Supply Roller: Assy |
| Парткод: | B247 4239 |
| Деталь: | Roller: Cleaning Felt: 32m: Assy (D131/D132) |
| Парткод: | AE04 5067 |
| Деталь: | Roller: Cleaning Felt: 28m: Assy (D133) |
| Парткод: | AE04 5068 |
| Деталь: | Shaft: Plate: Cleaning Felt |
| Парткод: | D062 4207 |
| Деталь: | Bracket: Cleaning Unit: Assy |
| Парткод: | G148 4202 |
| Деталь: | Bushing: Front: Oil Supply |
| Парткод: | D062 4191 |
| Деталь: | Bushing: Inner Back: Oil Supply |
| Парткод: | D062 4192 |
| Деталь: | SPRING |
| Парткод: | AA06 3886 |
| Деталь: | Pressure Roller: Cleaning Felt |
| Парткод: | AE04 4068 |
| Деталь: | Pressure Roller Gear |
| Парткод: | B065 4211 |
| Деталь: | Bracket: Stopper: Assy |
| Парткод: | B140 4209 |
| Деталь: | Cleaning Unit Cover |
| Парткод: | B140 4193 |
| Деталь: | Decal: Misfeed Removal: D3/D4: EXP |
| Парткод: | D131 4281 |
| Деталь: | Paper Tray: Universal: Assy |
| Парткод: | D131 6771 |
| Деталь: | Link: End Fence: Paper Size Sensor: Assy |
| Парткод: | B181 6780 |
| Деталь: | Link: Side Fence: Paper Size Sensor |
| Парткод: | B181 6789 |
| Деталь: | Spring Plate: Paper Tray: Earth |
| Парткод: | B132 6798 |
| Деталь: | Paper Tray Holder Base |
| Парткод: | B065 6591 |
| Деталь: | Decal: Paper Tray: Paper Set Direction |
| Парткод: | D131 6786 |
| Деталь: | Side Fence: Front: Assy |
| Парткод: | D131 6777 |
| Деталь: | Side Fence: Rear: Assy |
| Парткод: | D131 6775 |
| Деталь: | Plate: Side Fence |
| Парткод: | B132 6791 |
| Деталь: | Lever: Stopper: Positioning |
| Парткод: | D131 6538 |
| Деталь: | Spring Plate |
| Парткод: | A134 2978 |
| Деталь: | Pad: Cleaner |
| Парткод: | B234 2864 |
| Деталь: | Arm: End Fence: Lock |
| Парткод: | D131 6783 |
| Деталь: | END FENCE |
| Парткод: | D131 7032 |
| Деталь: | Tray Bottom Plate: Assy |
| Парткод: | D014 6780 |
| Деталь: | Bottom Plate Pad |
| Парткод: | AF01 3005 |
| Деталь: | Side Fence: Rear: Auxiliary |
| Парткод: | B132 6797 |
| Деталь: | Gear: 16Z |
| Парткод: | AB01 2327 |
| Деталь: | Tension Spring: Side Fence: Rear |
| Парткод: | AA06 0961 |
| Деталь: | Guide: Misfeed Removal: Paper Tray |
| Парткод: | B247 6695 |
| Деталь: | Decal: Side Fence: Rear |
| Парткод: | AA00 1597 |
| Деталь: | Lever: Stopper: Positioning |
| Парткод: | D120 2864 |
| Деталь: | Side Fence Stopper |
| Парткод: | A267 2859 |
| Деталь: | Spring Plate - Side Fence |
| Парткод: | A267 2857 |
| Деталь: | Shaft: Rise: Tray Bottom Plate: Press Fit |
| Парткод: | D062 6524 |
| Деталь: | Lift Lever |
| Парткод: | B065 6526 |
| Деталь: | Left Support Plate |
| Парткод: | B065 6589 |
| Деталь: | Right Support Plate |
| Парткод: | B065 6588 |
| Деталь: | Paper Tray Holder Stay |
| Парткод: | B065 6581 |
| Деталь: | Cushion - Motor |
| Парткод: | AA16 1104 |
| Деталь: | Fan Bracket - IPS |
| Парткод: | B065 1178 |
| Деталь: | Duct Seal - IPS |
| Парткод: | AA15 3155 |
| Деталь: | Entrance IPS Duct |
| Парткод: | B065 1175 |
| Деталь: | Fan: Sirocco: DC24V: Z: Assy |
| Парткод: | B247 1195 |
| Деталь: | Bracket: Duct: Exhaust |
| Парткод: | D062 1194 |
| Деталь: | Ground Plate: Panel: Large: 5 |
| Парткод: | D062 1031 |
| Деталь: | Sirocco Fan Motor DC24V/8.5W |
| Парткод: | AX65 0044 |
| Деталь: | Exhaust Duct Seal |
| Парткод: | AA15 3156 |
| Деталь: | Duct: Exhaust: Upper |
| Парткод: | D062 1192 |
| Деталь: | Duct: Exhaust: Lower |
| Парткод: | D062 1193 |
| Деталь: | Screw: M4: Exterior |
| Парткод: | AA14 3801 |
| Деталь: | Power Pack - Charactor Generator |
| Парткод: | AZ32 0163 |
| Деталь: | Charge Power Pack Bracket |
| Парткод: | B065 5804 |
| Деталь: | Harness: DC Power Supply: CNB: BCU |
| Парткод: | D062 5500 |
| Деталь: | Harness: CNB: ADF: Connecting |
| Парткод: | D131 5504 |
| Деталь: | Harness: Power Source: BCU: DRB |
| Парткод: | D062 5509 |
| Деталь: | Harness: Safety Switch |
| Парткод: | D062 5421 |
| Деталь: | Harness: Cnb: Main: Upper |
| Парткод: | D062 5420 |
| Деталь: | PCB: CNB: Assy (D131/D132) |
| Парткод: | D131 5014 |
| Деталь: | PCB: CNB: 90: Assy (D133) |
| Парткод: | D133 5014 |
| Деталь: | PCB: DRB: 60-75: Assy (D131/D132) |
| Парткод: | D062 5016 |
| Деталь: | PCB: DRB: 80-90: Assy (D133) |
| Парткод: | D066 5016 |
| Деталь: | CSS Bracket |
| Парткод: | B065 5805 |
| Деталь: | Development Roller |
| Парткод: | B065 3062 |
| Деталь: | Ball Bearing - 12x21x5 |
| Парткод: | B065 3080 |
| Деталь: | Development Roller Adjuster |
| Парткод: | B065 3077 |
| Деталь: | Bushing - 8mm |
| Парткод: | B065 3069 |
| Деталь: | Bushing: 4mm |
| Парткод: | B070 3115 |
| Деталь: | Fusing Exit Roller |
| Парткод: | AF04 0055 |
| Деталь: | Gear: Fusing Exit |
| Парткод: | AB01 9479 |
| Деталь: | Cleaning Roller Guide Plate |
| Парткод: | B065 4160 |
| Деталь: | Left Support Bracket |
| Парткод: | B065 4161 |
| Деталь: | Right Support Bracket |
| Парткод: | B065 4164 |
| Деталь: | Bushing - M4x7 |
| Парткод: | AE03 1024 |
| Деталь: | Cleaning Roller |
| Парткод: | AE04 2052 |
| Деталь: | Sheet: Fiber: Side Plate |
| Парткод: | B065 4129 |
| Деталь: | Side Plate: Fusing: Front: Assy |
| Парткод: | B247 4101 |
| Деталь: | Side Plate: Fusing: Rear: Assy |
| Парткод: | B247 4105 |
| Деталь: | Front Pressure Lever |
| Парткод: | B065 4177 |
| Деталь: | Rear Pressure Lever |
| Парткод: | B065 4178 |
| Деталь: | Lever: Release: Front: Assy |
| Парткод: | B247 4131 |
| Деталь: | Lever: Release: Pressure: Rear: Assy |
| Парткод: | B247 4147 |
| Деталь: | SPRING |
| Парткод: | AA06 0893 |
| Деталь: | Switch Holder |
| Парткод: | B065 4139 |
| Деталь: | Spring Plate - Switch |
| Парткод: | B065 4141 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW20 0010 |
| Деталь: | Lower Guide Plate - Exit |
| Парткод: | B065 4140 |
| Деталь: | Development Cover Screw |
| Парткод: | AA14 3810 |
| Деталь: | Stay: Fusing: Left |
| Парткод: | D131 4114 |
| Деталь: | RIGHT STAY |
| Парткод: | B065 4112 |
| Деталь: | Idler Gear |
| Парткод: | AB01 2318 |
| Деталь: | Gear: Drive: Fusing |
| Парткод: | AB01 2328 |
| Деталь: | Heater: Scanner: NA: Assy |
| Парткод: | D062 8498 |
| Деталь: | Heater: Scanner: EU: Assy |
| Парткод: | D062 8499 |
| Деталь: | Screw: M3: Black |
| Парткод: | AA14 3537 |
| Деталь: | Scale: Left |
| Парткод: | D131 1772 |
| Деталь: | Exposure Glass |
| Парткод: | BC01 2008 |
| Деталь: | SEAL |
| Парткод: | B065 1782 |
| Деталь: | Scale Bracket |
| Парткод: | B065 1787 |
| Деталь: | Scale Bracket Seal |
| Парткод: | B065 1773 |
| Деталь: | Exposure Glass Cushion |
| Парткод: | 54 421 924 |
| Деталь: | Cushion - 0.5 |
| Парткод: | AA16 1137 |
| Деталь: | Mylar: Frame: Front |
| Парткод: | B132 1683 |
| Деталь: | Mylar: Frame: Middle |
| Парткод: | B132 1684 |
| Деталь: | Mylar: Frame: Rear |
| Парткод: | B132 1685 |
| Деталь: | Original Sensor: H81.5 |
| Парткод: | AW01 0115 |
| Деталь: | Scale: Rear: Printing |
| Парткод: | D131 1692 |
| Деталь: | Scale: Sheet Through: Assy |
| Парткод: | D131 1686 |
| Деталь: | Scale: Sheet Through: NA: Assy |
| Парткод: | D131 1687 |
| Деталь: | Exposure Glass |
| Парткод: | A2501752 |
| Деталь: | GROUNDING PLATE |
| Парткод: | B065 1843 |
| Деталь: | Bracket: ADF |
| Парткод: | D062 1093 |
| Деталь: | Cover: Optics Section |
| Парткод: | D081 1674 |
| Деталь: | Spring Plate: Cover: Siob |
| Парткод: | D014 1681 |
| Деталь: | Cover: Siob |
| Парткод: | D014 1677 |
| Деталь: | RIGHT STAY |
| Парткод: | B065 1785 |
| Деталь: | Original Sensor: H1-81.5mm |
| Парткод: | AW01 0153 |
| Деталь: | Insulating Sheet: Original Sensor |
| Парткод: | D131 1683 |
| Деталь: | Guide Plate: Swivel: Adhesion (for Trays 1 & |
| Парткод: | B181 6640 |
| Деталь: | Guide Plate: Swivel: Auxiliary (for Tray 3) |
| Парткод: | D081 6671 |
| Деталь: | Transport Roller |
| Парткод: | AF022149 |
| Деталь: | BUSHING - M4 |
| Парткод: | AA08 0327 |
| Деталь: | Driven Shaft |
| Парткод: | AA14 0829 |
| Деталь: | Transport Roller Lever |
| Парткод: | B065 6453 |
| Деталь: | Screw - Scale |
| Парткод: | AA14 3812 |
| Деталь: | Driven Release Lever |
| Парткод: | B065 6454 |
| Деталь: | Driven Pressure Lever |
| Парткод: | B065 6455 |
| Деталь: | Support Guide Plate (for Trays 1 & 2) |
| Парткод: | B065 6371 |
| Деталь: | Guide Plate: Swivel (for Tray 3) |
| Парткод: | D081 6672 |
| Деталь: | Relay Shaft |
| Парткод: | B065 6317 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | Gear - 19Z |
| Парткод: | AB01 1469 |
| Деталь: | Tray Link Guide |
| Парткод: | B065 6452 |
| Деталь: | Paper Tray Link |
| Парткод: | B065 6346 |
| Деталь: | Arm Screw |
| Парткод: | 58 942 540 |
| Деталь: | SPRING |
| Парткод: | AA06 0901 |
| Деталь: | Gear - 18Z |
| Парткод: | AB01 1470 |
| Деталь: | Pulley: Idler: 30T/24Z |
| Парткод: | AB01 7690 |
| Деталь: | Synchronous Belt: Reverse: S2M118 |
| Парткод: | AA04 3675 |
| Деталь: | Gear: Reverse: 38Z21Z |
| Парткод: | D131 6666 |
| Деталь: | SPRING |
| Парткод: | AA06 0900 |
| Деталь: | Vertical Transport Link |
| Парткод: | B065 6456 |
| Деталь: | Ground Plate: Stepper Motor:Paper Feed Unit |
| Парткод: | B140 6378 |
| Деталь: | DC Stepper Motor: Paper Feed Unit:MM42: Assy |
| Парткод: | D131 6660 |
| Деталь: | MOTOR BRACKET |
| Парткод: | B065 6394 |
| Деталь: | SPRING |
| Парткод: | AA06 0904 |
| Деталь: | Motor Base |
| Парткод: | B065 6415 |
| Деталь: | Pulley - 20T |
| Парткод: | AB03 0733 |
| Деталь: | Synchronous Belt: Connecting:DC Stepper Motor |
| Парткод: | AA04 3676 |
| Деталь: | Joint: Timing Pulley: Reverse: T30 |
| Парткод: | D131 6664 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Paper Feed Roller: Separate |
| Парткод: | AF03 2080 |
| Деталь: | Torque Limiter - 53mnxm |
| Парткод: | A294 6700 |
| Деталь: | Reverse Driven Shaft |
| Парткод: | B065 6307 |
| Деталь: | DC Solenoid: Reverse: Assy |
| Парткод: | B132 6670 |
| Деталь: | Reverse Housing |
| Парткод: | B065 6333 |
| Деталь: | Gear: Reverse |
| Парткод: | AB01 1591 |
| Деталь: | Reverse Gear |
| Парткод: | AB01 1471 |
| Деталь: | Shaft: Drive: Reverse: Assy |
| Парткод: | D131 6661 |
| Деталь: | Compression Spring: Joint: 2.0N |
| Парткод: | D131 6693 |
| Деталь: | Joint: Slider: Grip |
| Парткод: | D131 6663 |
| Деталь: | Harness: Interface Cable |
| Парткод: | D609 5510 |
| Деталь: | Harness: CIS: Image Data |
| Парткод: | D609 5500 |
| Деталь: | Harness: Sensor: Base: Connecting |
| Парткод: | D412 5910 |
| Деталь: | Harness: CIS: Control |
| Парткод: | D609 5410 |
| Деталь: | Harness: Motor: Base |
| Парткод: | D412 5870 |
| Деталь: | Harness: Motor: Exit |
| Парткод: | D412 5850 |
| Деталь: | Harness: Motor: Pick Up |
| Парткод: | D412 5890 |
| Деталь: | Paper Feed Motor Harness |
| Парткод: | B477 5691 |
| Деталь: | PCB: Main Control: Montblanc-c: Assy |
| Парткод: | D609 5120 |
| Деталь: | Bracket: DC Fan Motor |
| Парткод: | D412 1912 |
| Деталь: | Fan Motor DC24V 1.92W |
| Парткод: | GX64 0028 |
| Деталь: | Stepper Motor: Exit: Assy |
| Парткод: | D412 1731 |
| Деталь: | Scanning Motor- DC 7.4W |
| Парткод: | B477 3721 |
| Деталь: | Stay: Motor: Scanning |
| Парткод: | D4121726 |
| Деталь: | Tension Spring: Tension: Transport |
| Парткод: | AA06 0991 |
| Деталь: | Bracket: Motor: Scanning: Assy |
| Парткод: | D412 1711 |
| Деталь: | PULLEY |
| Парткод: | B477 3217 |
| Деталь: | Timing Belt: 40S2M132 |
| Парткод: | D4121741 |
| Деталь: | Timing Belt: 40S3M291 |
| Парткод: | D4121743 |
| Деталь: | Timing Belt: S2M200 |
| Парткод: | C269 3957 |
| Деталь: | Timing Belt: 80S3M507 |
| Парткод: | D412 1742 |
| Деталь: | Rubber Bushing - Vibration Damper |
| Парткод: | 59 362 321 |
| Деталь: | Stepper Motor: DIA42: Assy |
| Парткод: | D412 2321 |
| Деталь: | Timing Belt: B40S2M158 |
| Парткод: | B700 4428 |
| Деталь: | Gear: Z20/Z47: M0.8: Right: Rear |
| Парткод: | D412 2348 |
| Деталь: | Gear: Z20/Z47: M0.8: Right: Front |
| Парткод: | D412 2346 |
| Деталь: | Timing Pulley: T30/Z20: S2M/M0.8 |
| Парткод: | D412 2349 |
| Деталь: | Gear: Z20/Z47: M0.8: Left: Rear |
| Парткод: | D412 2347 |
| Деталь: | Pulley: Idler: DIA18 |
| Парткод: | D4121754 |
| Деталь: | Bracket: Tensioner: Scanning: Assy |
| Парткод: | D412 1751 |
| Деталь: | TENSION SPRING |
| Парткод: | B652 3174 |
| Деталь: | Screw: Safety |
| Парткод: | AA14 3791 |
| Деталь: | Bracket: Cover: Drive |
| Парткод: | D4121791 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B652 1134 |
| Деталь: | Shaft: Slider |
| Парткод: | B652 1133 |
| Деталь: | Harness: CIS: Power Source |
| Парткод: | D609 5400 |
| Деталь: | Front Harness |
| Парткод: | B065 4150 |
| Деталь: | Rear Harness |
| Парткод: | B065 4151 |
| Деталь: | Electrode Plate: Thermostat |
| Парткод: | D066 4223 |
| Деталь: | Thermostat: 190 |
| Парткод: | AW11 0085 |
| Деталь: | Thermostat: 193 |
| Парткод: | AW11 0084 |
| Деталь: | Housing: Thermostat |
| Парткод: | D066 4221 |
| Деталь: | Bracket: Thermistor: Inner Back |
| Парткод: | B110 4231 |
| Деталь: | Middle Thermistor Cover |
| Парткод: | B065 4132 |
| Деталь: | Middle Thermistor (D133) |
| Парткод: | AW10 0084 |
| Деталь: | Thermostat Housing - Middle |
| Парткод: | B065 4130 |
| Деталь: | Stay: Fusing: Upper: Assy |
| Парткод: | D066 4211 |
| Деталь: | Front Heater Holder |
| Парткод: | B065 4124 |
| Деталь: | Rear Heater Holder |
| Парткод: | B065 4170 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | A413 1670 |
| Деталь: | Bushing - 30x35x13.5 |
| Парткод: | AE03 2014 |
| Деталь: | Ball Bearing - 35x50x10 |
| Парткод: | AE03 0017 |
| Деталь: | Fusing Gear |
| Парткод: | AB01 2316 |
| Деталь: | Harness Holder |
| Парткод: | B065 4159 |
| Деталь: | Connector bracket |
| Парткод: | B065 4157 |
| Деталь: | Harness: Fusing Unit: EXP |
| Парткод: | D066 4156 |
| Деталь: | Hot Roller |
| Парткод: | AE01 1044 |
| Деталь: | Heater: 220V: 600W |
| Парткод: | AX44 0285 |
| Деталь: | Heater: 220V: 700W |
| Парткод: | AX44 0301 |
| Деталь: | Spacer - 16mm |
| Парткод: | B065 4180 |
| Деталь: | Ball Bearing - 12x28x8 |
| Парткод: | AE03 0018 |
| Деталь: | Pressure Roller: DIA50 |
| Парткод: | AE02 0178 |
| Деталь: | Pressure Roller Shaft |
| Парткод: | AA14 0823 |
| Деталь: | Connector - 3P |
| Парткод: | A247 4249 |
| Деталь: | SPRING |
| Парткод: | AA06 0894 |
| Деталь: | Thermistor: Inner Back |
| Парткод: | AW10 0076 |
| Деталь: | Transport Belt Unit: Assy |
| Парткод: | D412 0331 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | B652 3125 |
| Деталь: | Bracket: Roller: Driven: Transport Belt |
| Парткод: | B652 3129 |
| Деталь: | Driven Roller: Scanning |
| Парткод: | D412 3125 |
| Деталь: | Roller: Scanning: Pressure |
| Парткод: | D412 3113 |
| Деталь: | Spacer: Transport Belt |
| Парткод: | B652 3156 |
| Деталь: | Guide: Transport Belt: Front |
| Парткод: | B652 3116 |
| Деталь: | Guide: Transport Belt: Rear |
| Парткод: | B652 3117 |
| Деталь: | Bracket: Pressure: Transport Belt: Rear |
| Парткод: | D412 1131 |
| Деталь: | Tension Spring: Lever: Misfeed Removal |
| Парткод: | D412 3145 |
| Деталь: | TENSION SPRING |
| Парткод: | B652 1132 |
| Деталь: | Roller: Drive Roller: Transport Belt Unit |
| Парткод: | D412 3156 |
| Деталь: | Bushing: Drive Roller: Transport Belt Unit |
| Парткод: | D412 3154 |
| Деталь: | Roller: Scanning: Transport Belt |
| Парткод: | D412 3153 |
| Деталь: | Shaft: Scanning: Transport Belt: Drive |
| Парткод: | D412 3152 |
| Деталь: | Stopper: Roller: Drive |
| Парткод: | B652 3119 |
| Деталь: | Tapping Screw: M3x6 |
| Парткод: | AA14 3846 |
| Деталь: | Link: Stopper: Cover: Paper Feed |
| Парткод: | B652 1816 |
| Деталь: | Transport Belt |
| Парткод: | B652 3121 |
| Деталь: | Front Left Stopper |
| Парткод: | B477 1191 |
| Деталь: | Pin: Guide Plate: Paper Feed |
| Парткод: | AA14 3788 |
| Деталь: | Hook: Lock: Image Reading Unit: Front |
| Парткод: | D609 3148 |
| Деталь: | Shaft: Lever: Misfeed Removal: Assy |
| Парткод: | D412 3146 |
| Деталь: | Pulley: Belt Tensioner |
| Парткод: | A257 6112 |
| Деталь: | Cover: Roller: Scanning: Peen |
| Парткод: | B652 3136 |
| Деталь: | Timing Belt: B60S2M172 |
| Парткод: | B652 3135 |
| Деталь: | Timing Pulley: GEAR: T21-Z21 |
| Парткод: | D412 1771 |
| Деталь: | Bracket: Paper Feed Sebsor |
| Парткод: | B477 2495 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0117 |
| Деталь: | Harness: Sensor: Registration |
| Парткод: | D609 5420 |
| Деталь: | Guide Plate: Scanning: Exit |
| Парткод: | D609 2481 |
| Деталь: | Sheet: Scanning: Exit: Upper: Assy |
| Парткод: | D412 2485 |
| Деталь: | Housing: Transport Belt: Scanning |
| Парткод: | D412 3111 |
| Деталь: | Spring: Tandem LCT: Lock |
| Парткод: | D062 6590 |
| Деталь: | Bracket: Rail: Left |
| Парткод: | D059 6742 |
| Деталь: | Base: Slide Rail: Tandem LCT: Peen |
| Парткод: | B247 6792 |
| Деталь: | Tray Lock Arm |
| Парткод: | B065 6136 |
| Деталь: | Slide Rail: Tandem LCT: Left: Assy |
| Парткод: | D062 6256 |
| Деталь: | Anticondensation Heater - 120V 9W |
| Парткод: | AX40 0122 |
| Деталь: | Anticondensation Heater - 230V 10W |
| Парткод: | AX40 0123 |
| Деталь: | Guide Plate - Upper Heat Sink |
| Парткод: | A248 6103 |
| Деталь: | Upper Heat Sink |
| Парткод: | B065 6116 |
| Деталь: | Supporting Plate: Stay |
| Парткод: | B065 6777 |
| Деталь: | Bracket: Lever: Slide: Auxiliary |
| Парткод: | D062 6777 |
| Деталь: | Development Cover Screw |
| Парткод: | AA14 3810 |
| Деталь: | Slide Rail: Tandem LCT |
| Парткод: | AA07 0087 |
| Деталь: | Slidebracket |
| Парткод: | B065 6774 |
| Деталь: | Slide Rail: Tandem Lct: Right: Assy |
| Парткод: | D062 6275 |
| Деталь: | Screw: M4x10 |
| Парткод: | D059 6858 |
| Деталь: | Anti Static Brush |
| Парткод: | AA12 0067 |
| Деталь: | Guide Plate: Exit: Exit: Upper |
| Парткод: | B246 4311 |
| Деталь: | Exhaust Cover Assy |
| Парткод: | B140 4313 |
| Деталь: | Exit Detection Harness |
| Парткод: | B065 4499 |
| Деталь: | Side Plate: Exhaust: Front |
| Парткод: | D131 4306 |
| Деталь: | Side Plate: Exhaust: Rear |
| Парткод: | D131 4307 |
| Деталь: | Slide Rail: Fusing/Paper Exit Unit: Left: Assy |
| Парткод: | D062 4440 |
| Деталь: | Left Rise Guide Plate |
| Парткод: | B140 4312 |
| Деталь: | Holder Bracket |
| Парткод: | B065 4830 |
| Деталь: | Base cover |
| Парткод: | B065 1075 |
| Деталь: | Guard: Fan: MM80 |
| Парткод: | D062 1199 |
| Деталь: | Fan Motor DC24V/1.92W |
| Парткод: | AX64 0183 |
| Деталь: | Bracket: DC Fan Motor: Duplex |
| Парткод: | D062 1198 |
| Деталь: | Cushion - Motor |
| Парткод: | AA16 1104 |
| Деталь: | Duplex Fan Harness |
| Парткод: | B065 1198 |
| Деталь: | Right Duplex Rail |
| Парткод: | B247 4591 |
| Деталь: | Hinge: Control Unit: Main: Assy |
| Парткод: | D062 5824 |
| Деталь: | BRACKET |
| Парткод: | B065 1092 |
| Деталь: | Bracket: Shaft: Lock: Assy |
| Парткод: | B247 4263 |
| Деталь: | Magnet Catch: Assy |
| Парткод: | AG07 1012 |
| Деталь: | Magnet Catch Bracket |
| Парткод: | B065 1197 |
| Деталь: | Guide Roller - B |
| Парткод: | A300 2134 |
| Деталь: | Rail: Left: Machine or Copier: Assy |
| Парткод: | B247 4835 |
| Деталь: | Roller - Positioning Guide |
| Парткод: | 67 542 866 |
| Деталь: | Stripper Pawls Plate |
| Парткод: | B065 4179 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Registration Roller - Lower |
| Парткод: | B247 2627 |
| Деталь: | Registration Roller: Upper: Press Fit |
| Парткод: | B247 2623 |
| Деталь: | BUSHING - 6MM |
| Парткод: | AA08 0037 |
| Деталь: | Spring - Registration Roller |
| Парткод: | 54 422 754 |
| Деталь: | Spacer - 1x8x12 |
| Парткод: | AA13 2025 |
| Деталь: | Ball Bearing - 8x12x5 |
| Парткод: | A247 2800 |
| Деталь: | Registration Roller Gear |
| Парткод: | AB01 4077 |
| Деталь: | Lower Registration Guide |
| Парткод: | B247 2611 |
| Деталь: | Stay: Reverse: Assy |
| Парткод: | B247 2700 |
| Деталь: | Friction Pad - B |
| Парткод: | B247 2702 |
| Деталь: | BUSHING - M6 |
| Парткод: | AA08 2118 |
| Деталь: | Snap Ring |
| Парткод: | G011 1058 |
| Деталь: | Drive Reverse Gear - 24z |
| Парткод: | AB01 1392 |
| Деталь: | Shaft: Reverse: Drive: Assy |
| Парткод: | G126 2713 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Paper Feed Roller: Separate |
| Парткод: | AF03 2080 |
| Деталь: | Torque Limiter - 53mnxm |
| Парткод: | A294 6700 |
| Деталь: | Shaft: Reverse Roller: Assy |
| Парткод: | G126 2714 |
| Деталь: | Gear: Reverse |
| Парткод: | AB01 1591 |
| Деталь: | Feed Lever |
| Парткод: | B065 6445 |
| Деталь: | DC Stepper Motor: Paper Feed: Main: Assy |
| Парткод: | D066 2751 |
| Деталь: | Stay: Reverse Roller: Peen |
| Парткод: | B247 2699 |
| Деталь: | Paper Feed Sensor |
| Парткод: | AW01 0107 |
| Деталь: | Middle Sensor Bracket |
| Парткод: | B065 2708 |
| Деталь: | Paper End Sensor Bracket |
| Парткод: | B065 2707 |
| Деталь: | Photointerruptor: Flat |
| Парткод: | AW02 0145 |
| Деталь: | Reverse Pressure Lever |
| Парткод: | B065 2709 |
| Деталь: | SPRING |
| Парткод: | AA06 0911 |
| Деталь: | Gear - 24Z/46Z |
| Парткод: | AB01 7606 |
| Деталь: | Timing Belt: 60S2M288 |
| Парткод: | GA04 3028 |
Коды ошибок
101
120
121
141
142
144
161-01
161-02
161-03
165
181
182
185
186
187
188
189
195
202
203
204
205
220
221
230
231
240
270
300
305-00
306-00
307-00
320-01
324-01
360-01
360-11
361-00
362-00
370-0
370-11
375-00
376-00
377-00
378-00
380-01
380-11
380-21
380-31
380-41
380-51
396-01
410-00
440-01
440-02
495-00
496-00
501
502
503
504
510
515-00
516-00
530-00
540-01
540-02
540-03
540-04
541
542-001
542-002
542-003
543
544
545
547-01
547-02
547-03
551
552-01
552-02
552-03
553
555
557
559
569
590-00
620-01
620-2
621-01
621-02
623
626-01
626-02
632
633
634
635
636-01
636-02
636-11
637-01
637-02
640
641
650-01
650-04
650-05
650-13
650-14
651-01
652
653
670
671
672
700-01
700-02
720-01
720-24
720-25
720-30
720-41
720-42
720-43
720-44
720-52
720-53
720-55
720-57
720-60
720-61
720-70
720-71
720-72
720-73
720-74
720-75
720-80
720-81
720-87
722-01
722-10
722-24
722-25
722-30
722-33
722-35
722-36
722-37
722-39
722-40
722-41
722-42
722-43
722-44
722-70
722-71
722-72
722-74
722-75
722-80
722-81
722-83
724-71
725-01
725-12
725-13
725-14
725-30
725-31
725-32
725-33
725-34
725-35
725-36
725-37
725-38
725-41
725-71
725-72
725-73
725-74
740-10
783-3
783-4
816
817
819
820
821
822
823
824
829
833
834
838
840
841
842
850
851
853
854
855
857
858
859
860
861
862
863
864
865
866
867
868
870
872
873
874
875
876
877
878
880
881
889
900
901
910
911
912
913
914
915
919
920
921
925
953
954
955
964
965
984
985
986
990
991
992
994
995
997
998
Описание
| Error code: | 101 |
| Description: | Replace Maintenance Kit The Printer detected an error condition that indicates the parts listed below need to be replaced. This will ensure the rated engine life of 600,000 prints is achievable. |
| Causes: | • Long-Life Maintenance Kit, 650-4360-00 |
| Remedy: | 1 Follow the procedure starting and replace all concerned parts. Have all parts outlined in the procedure been replaced? Go to the Hidden Service menu on the Control Panel and Reset the Maintenance Kit Life count. Replace all concerned parts. |
| Error code: | 120 |
| Display: | Service Call 120: Error |
| Description: | Fuser Error |
| Causes: | 1) Is fan in PU unit operating? 2) Error reoccurs after replacing fan motor. |
| Remedy: | Wrong fuser lamp - hot roll - replace the fuser assembly. See “Fuser assembly” |
| Error code: | 121 |
| Display: | Service Call 121: Error |
| Description: | Fuser Error |
| Causes: | Is cable between PU board andhighvoltage power LSI connected properly? |
| Remedy: | Wrong fuser lamp - BUR - replace the fuser assembly |
| Error code: | 141 |
| Display: | SVC 141 ERROR |
| Description: | Motor |
| Causes: | • SBU to IPU harnesses defective • BCU to IPU harnesses defective • SBU defective • IPU defective • BCU defective |
| Remedy: | DC pick motor excessive PWM - staging motor - replace the “Staging motor”. If this does not fix the problem, replace the “System board” |
| Error code: | 142 |
| Display: | Contact the Service center. 142: Error |
| Description: | Motor |
| Causes: | • Standard white plate defective, dirty • Moisture inside the scanner unit • SBU to IPU harnesses defective • BCU to IPU harnesses defective • SBU defective • IPU defective • BCU defective |
| Remedy: | DC pick motor, over speed - staging motor - replace the “Staging motor”. If this does not fix the problem, replace the “System board”. |
| Error code: | 144 |
| Display: | ERROR 144 CARTRIDGE SET ! |
| Description: | Motor |
| Causes: | • SBU defective • BCU defective • Harness between SBU and IPU defective |
| Remedy: | DC motor accel stall - autocompensator motor - replace the “Autocompensator pick assembly” on page 4-24. If this does not fix the problem, replace the “System board” on page 4-80. |
| Error code: | 161-01 |
| Display: | **** ERROR 161 **** NCU EXCHANGE |
| Description: | The error result of self-diagnostic by the ASIC on the BICU is detected. |
| Causes: | • Defective BICU • Defective connection between BICU and SBU |
| Remedy: | 1. Check the connection between IPU and SBU. 2. Replace the IPU. |
| Error code: | 161-02 |
| Description: | Detected an error during an access to the Ri. |
| Causes: | • Defective BICU board |
| Remedy: | Replace the IPU board. |
| Error code: | 161-03 |
| Description: | IPU error The ASIC on the IPU fails to configure or initialize the DRAM. |
| Causes: | • Defective IPU board |
| Remedy: | Replace the IPU board. |
| Error code: | 165 |
| Description: | Out of Paper; Load Tray 1 (MPT) with [size] [type] The Tray 1 (MPT) No Paper Sensor indicates Tray 1 (MPT) is empty. |
| Causes: | • No Paper Sensor, PL5.3.14 • No Paper Sensor Actuator, PL5.3.15 • FRONT/DUP Harness, PL5.3.28 |
| Remedy: | 1 Fill Tray 1 (MPT) with paper. Does the error persist? Go to Step 2. Complete. 2 Check the following for evidence of fault or damage: • Tray 1 (MPT) No Paper Sensor, PL5.3.14 • Sensor Actuator, PL5.3.15 Is there any damage? Replace any damaged parts. Go to Step 3. 3 Test the Tray 1 (MPT) No Paper Sensor. Run the Service Diagnostics Tray 1 (MPT) No Paper Sensor test. Does the sensor function correctly? Replace the Engine Control Board. Go to Step 4. 4 Check the Tray 1 (MPT) No Paper Sensor signal. Is there +3.3 V across P/J135-1 <=> P/J135-2? Replace the sensor. Go to Step 5. 5 Check all pins on the FRONT/DUP Harness PL5.3.28 for continuity. 1. Disconnect P/J13 and P/J135. 2. Check continuity between J13 <=> J134. Replace the Engine Control Board. Replace the FRONT/DUP Harness. |
| Error code: | 181 |
| Display: | Inspection is required. 181:Error |
| Description: | Scanner Unit Fan Error: Lamp Regulator Fan (Right) (D016/D097 only) The MCU issued a lock signal for the lamp regulator fan (front, right). |
| Causes: | • Fan, MCU harness loose, defective • Lamp regulator (right) fan motor defective • MCU defective • SIB defective |
| Error code: | 182 |
| Display: | Service call 182: Error |
| Description: | I/F Error, Loc: Tray2 |
| Causes: | • Scanner unit harness loose, defective • Fan, MCU harness loose, defective • SBU Fan motor defective • MCU defective • SIB defective |
| Error code: | 185 |
| Display: | SYSTEM HALT (*) 185 : PCB LED |
| Description: | Exposure Lamp 1 Lamp Regulator (Right) Error (D016/D097 only) The MCU detected a defect in the lamp regulator (right) when the 1st exposure lamp lit. . |
| Causes: | • 1st exposure lamp defective • 1st lamp FFC (flat film cable) loose or defective • MCU to lamp regulator (left) harness defective • Lamp regulator (left) is defective • MCU defective • SIB defective |
| Error code: | 186 |
| Display: | ERROR 186 HDC UNDERFLOW |
| Description: | Exposure Lamp 2 Lamp Regulator (Left) Error (D016/D097 only) The MCU detected a defect in the lamp regulator (left) when the 2nd exposure lamp lit. . |
| Causes: | • 2nd exposure lamp defective • 2nd lamp FFC (flat film cable) loose or defective • MCU to lamp regulator (left) harness defective • Lamp regulator (left) is defective • MCU defective • SIB defective |
| Error code: | 187 |
| Display: | Service Call 187: Error |
| Description: | I/F Error,Loc: Control Panel (Reserved) |
| Causes: | Is cable properly connected to control panel? |
| Remedy: | Connect properly. Replace control panel and cable. |
| Error code: | 188 |
| Display: | Service Call 188: Error |
| Description: | Motor Driver Board Communications Error Applicable Status Code: Code 188: A Sub-CPU communications error with installed options. |
| Causes: | • Motor Driver Board, PL2.1.10 |
| Remedy: | 1 Check the connections to the Engine Control Board. Are DV0 and DV1 completely connected? Replace the Motor Driver Board. Connect the two ribbon cables. |
| Error code: | 189 |
| Display: | Service Call 189: Error |
| Description: | CIS gray balance adjustment error The adjustment error occurs during the test after adjusting the gray balance. |
| Causes: | • Defective CIS |
| Remedy: | 1. Retry the gray balance adjustment. 2. If the machine does not recover, do the following steps. • Turn off the machine. • Make sure CN210 and CN220 are connected firmly. • Turn on the machine. 3. If the machine does not recover, replace the CIS. |
| Error code: | 195 |
| Description: | Serial Number Error |
| Causes: | The serial number stored in the memory (EGB) is not correct. |
| Remedy: | EEPROM defective EGB replaced without original EEPROM |
| Error code: | 202 |
| Display: | ERROR 202 PARAMETER |
| Description: | Polygon motor error 1: ON timeout |
| Causes: | The polygon mirror motor does not reach the targeted operating speed within 5 sec. after turning on or changing speed. |
| Error code: | 203 |
| Display: | Power OFF/ON 203:Error ssssssssssssssss |
| Description: | Polygon motor error 2: OFF timeout |
| Causes: | The polygon mirror motor does not leave the READY status within 3 sec. after the polygon motor switched off. |
| Error code: | 204 |
| Display: | Power OFF/ON 204:Error |
| Description: | Polygon motor error 3: XSCRDY signal error |
| Causes: | The SCRDY_N signal remains HIGH for 200 ms while the LD unit is firing. |
| Remedy: | • Polygon motor/driver board harness loose or disconnected • Polygon motor/driver board defective • Laser optics unit defective • IPU (EGB) defective 1. Replace the interface harness of the laser optics unit. 2. Replace the laser optics unit. 3. Replace the EGB (Engine Board). |
| Error code: | 205 |
| Display: | ERROR 205 47V HEAD VOLTAGE |
| Description: | No page at DUP IN (Reserved) |
| Causes: | Disconnected cable from the polygon motor drive board or defective connection. Defective polygon motor or drive board. |
| Remedy: | 1. Check the connectors. 2. Replace the polygon motor. 3. Replace the polygon motor drive board. |
| Error code: | 220 |
| Display: | Service Call 220: Error |
| Description: | Laser Synchronizing Detection Error: [K]/[Y] |
| Causes: | The laser synchronizing detection signal for LDB [K]/[Y] is not output after the LDB unit has turned on while the polygon motor is rotating normally. |
| Error code: | 221 |
| Description: | Laser synchronizing detection error: start position [K]: LD1 The laser synchronizing detection signal for the start position of the LDB [K], [Y], [M], [C] is not output for two seconds after LDB unit turns on while the polygon motor is rotating normally. |
| Causes: | • Disconnected cable from the laser synchronizing detection unit or defective connection • Defective laser synchronizing detector • Defective LDB • Defective EGB |
| Remedy: | 1. Check the connectors. 2. Replace the laser-synchronizing detector. 3. Replace the LDB. 4. Replace the BCU. |
| Error code: | 230 |
| Display: | Service Call 230: Error |
| Description: | Paper Jam Clear Paper Path Leave Job in Finisher area 5 |
| Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
| Remedy: | Primary: Paper has most likely jammed in the duplex option. Remove the duplex tray to access the jam. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “230 Paper Jam” on page 2-74. |
| Error code: | 231 |
| Display: | Service Call 231: Error |
| Description: | FGATE OFF error: Bk • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [K]. • The PFGATE ON signal still asserts when the next job starts. |
| Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
| Remedy: | 1. Check the connection between the controller board and the BCU. 2. Replace the BCU. 3. Replace the controller board. |
| Error code: | 240 |
| Display: | Service call 240: Error |
| Description: | LD error |
| Causes: | The IPU (EGB) detects a problem at the LD unit. |
| Remedy: | • Worn-out LD • Disconnected or broken harness of the LD. 1. Replace the laser optics unit. |
| Error code: | 270 |
| Description: | GAVD communication error On startup, Read/Write performed for the same register does not match. |
| Causes: | Defective GAVD. Defective eSOC. Defective BCU. Defective harness. |
| Remedy: | • Turn the main power switch off and on. • Replace the laser optics-housing unit. • Replace the BCU. |
| Error code: | 300 |
| Description: | High voltage power output error |
| Causes: | The measured voltage is not correct when the EGB measures each charge output (charge, development, image transfer belt unit, and transfer unit). |
| Remedy: | • Disconnected or defective high voltage harness • Defective high voltage power supply • Defective EGB 1. Check or replace the harnesses. 2. Replace the high voltage power supply board 3. Replace the EGB. |
| Error code: | 305-00 |
| Description: | Charge corona wire cleaner error 1 The charge cleaner pad does not arrive at the home position: Motor locked within 4 s after switching on, or does not lock within 30 s. Motor locked within 10 s after reversing, or does not lock within 30 s. |
| Causes: | • Charge corona wire cleaner motor defective • Motor driver defective |
| Error code: | 306-00 |
| Description: | Charge corona wire cleaner error 2 Charge corona motor is disconnected. (The current at the charge corona motor is detected less than 83 mA.) |
| Causes: | • Charge corona wire cleaner motor connector is defective or disconnected. |
| Error code: | 307-00 |
| Description: | Charge grid circuit open When high voltage goes to the corona grid, feedback voltage is more than the set value 9 times. This feedback voltage is used to update PWM for output control. |
| Causes: | • Charge corona unit defective or disconnected • Charge corona harness defective • Charge corona power pack is defective. |
| Error code: | 320-01 |
| Description: | Development output abnormal The high voltage applied to the development unit is detected 10 times higher than the upper limit (45%) of PWM. |
| Causes: | • Development power pack defective • Development bias leak due to poor connection, defective connector |
| Error code: | 324-01 |
| Description: | Development motor lock The development motor lock signal remains high for 2 seconds while the development motor is on. |
| Causes: | If this SC is returned on a machine in the field, inspect the toner supply unit coil. If the gear is not damaged, replace the coil. If the gear is damaged, the gear shaft is probably deformed, so replace the entire unit. • Drive mechanism overloaded due to toner clumping in the wasted toner path • Motor driver board defective |
| Error code: | 360-01 |
| Description: | TD sensor adjustment error: K During TD sensor initialization, the output value of the black, cyan, magenta, or yellow TD sensor is not within the range of the specified value with SP3-238-001 to -004 (default: 2.5V)+-0.2V |
| Causes: | A TD sensor-related part is faulty. A TD sensor-related part`s connection is loose. The developer`s toner thickness differs from that of the initial developer. |
| Remedy: | • Turn the main power switch off and then back on. • Replace the PCU. |
| Error code: | 360-11 |
| Description: | TD sensor adjustment error: Timeout Error During the TD sensor auto adjustment, the TD sensor output voltage (Vt) does not enter the target range (3.0 ± 0.1V) within 20 s. When this error occurs, the display of SP2-906-1 reads 0.00V. Note: This SC is released only after correct adjustment of the TD sensor has been achieved. Switching the machine off and on will cancel the SC display, but does not release ID sensor toner supply. |
| Causes: | • TD sensor defective • TD sensor harness disconnected • TD sensor connector disconnected or defective • IOB defective |
| Error code: | 361-00 |
| Description: | TD sensor output error: Upper Limit TD sensor output voltage (Vt), measured during each copy cycle, is detected higher than 4V for 10 prints. |
| Causes: | • TD sensor defective • TD sensor harness disconnected • TD sensor connector disconnected or defective • IOB defective • Toner bottle motor defective Note: When the TD sensor is defective, the toner supply is controlled using pixel count and the ID sensor. |
| Error code: | 362-00 |
| Description: | TD sensor output error: Lower limit TD sensor output voltage (Vt), measured during each copy cycle, is detected 10 times lower than 0.5V. |
| Causes: | • TD sensor defective • TD sensor harness disconnected • TD sensor connector disconnected or defective • IOB defective • Toner bottle motor defective Note: When the TD sensor is defective, the toner supply is controlled using pixel count and the ID sensor. |
| Error code: | 370-0 |
| Description: | ID sensor adjustment error: LED output abnormal One of the following ID sensor output voltages is detected at ID sensor initialization. • Vsg less than 4.0V when the maximum PWM input (255) is applied to the ID sensor. • Vsg greater than or equal to 4.0V when the minimum PWM input (0) is applied to the ID sensor. |
| Causes: | • ID sensor defective • ID sensor harness disconnected • ID sensor connector defective • IOB defective • ID sensor pattern not written correctly • Incorrect image density • Charge power pack defective • ID sensor dirty |
| Error code: | 370-11 |
| Description: | ID sensor adjustment error: Timeout error Vsg falls out of the adjustment target (4.0 ±0.2V) during Vsg checking within 20 sec. |
| Causes: | • ID sensor defective • ID sensor harness disconnected • ID sensor connector defective • IOB defective • ID sensor pattern not written correctly • Incorrect image density • Charge power pack defective • ID sensor dirty |
| Error code: | 375-00 |
| Description: | ID sensor error: Drum surface voltage error The ID sensor output voltage is 5.0V and the PWM signal input to the ID sensor is 0 when checking the ID sensor pattern. |
| Causes: | • ID sensor defective • ID sensor harness disconnected • ID sensor connector defective • IOB defective • ID sensor pattern not written correctly • Incorrect image density • Charge power pack defective • ID sensor dirty |
| Error code: | 376-00 |
| Description: | ID sensor error: Pattern edge detection failed For 2 s during the ID sensor pattern check, the ID sensor pattern edge voltage is not 2.5V or the pattern edge is not detected within 800 ms. |
| Causes: | • ID sensor defective • ID sensor harness disconnected • ID sensor connector defective • IOB defective • ID sensor pattern not written correctly • Incorrect image density • Charge power pack defective • ID sensor dirty |
| Error code: | 377-00 |
| Description: | ID sensor error: Potential surface reading error The Vp value, which measures the reflectivity of the ID sensor pattern, was not in the range of -70V to -400V. |
| Causes: | • Potential sensor defective • Potential sensor harness defective • Potential sensor disconnected • IOB defective • OPC unit connector defective • Charge corona power pack defective • Charge corona wire dirty, broken |
| Error code: | 378-00 |
| Description: | ID sensor pattern error One of the following ID sensor output voltages was detected twice consecutively when checking the ID sensor pattern. • Vsp greater than or equals 2.5V • Vsg less than 2.5 • Vsp = 0V • Vsg = 0 |
| Causes: | • ID sensor defective • ID sensor harness disconnected • ID sensor connector defective • IOB defective • ID sensor pattern not written correctly • Incorrect image density • Charge power pack defective • ID sensor dirty |
| Error code: | 380-01 |
| Description: | Potential sensor calibration error (VM100) During drum potential sensor calibration, when -100V is applied to the drum, the output value is out of the prescribed range. |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Development power pack defective |
| Error code: | 380-11 |
| Description: | Potential sensor calibration error (VM800) During drum potential sensor calibration, when -800V is applied to the drum, the output value is out of the prescribed range. |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Development power pack defective |
| Error code: | 380-21 |
| Description: | Potential sensor calibration error (skew) During drum potential sensor calibration, the drum potential sensor output voltage does not meet specification when test voltages (–100V, –800V) are applied to the drum. |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Development power pack defective |
| Error code: | 380-31 |
| Description: | Potential sensor calibration error (cut off) During drum potential sensor calibration, the drum potential sensor output voltage did not meet specification when test voltages (–100V, –800V) are applied to the drum. |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Development power pack defective |
| Error code: | 380-41 |
| Description: | Potential sensor calibration error (VD) During drum potential sensor calibration when adjusting the drum potential (VD), the drum potential sensor detects VD higher than VG (grid voltage). -or- When adjusting VD (drum surface potential of black areas after exposure), even after 5 adjustments of VG (charge corona grid potential), VD could not be set in the target range (–800±20+ VL + 130V) |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Development power pack defective • Charge corona unit worn out, dirty |
| Error code: | 380-51 |
| Description: | Potential sensor calibration (VL) During drum potential sensor calibration, when VL is adjusted, the pattern surface potential VL pattern is not within range 0V to -400V. (VL is the potential after exposing a white pattern.) |
| Causes: | • Potential sensor defective • Potential sensor harness disconnected • Potential sensor connector defective or disconnected • IOB defective • OPC connector defective • Charge corona power pack defective • Development power pack defective |
| Error code: | 396-01 |
| Description: | Drum/Development motor error: K The machine detects a High signal from the drum/development motor for 100 ms after the drum/development motor turned on. |
| Causes: | Overload on the drum/development motor. Defective drum/development motor. Loose connection. Defective harness. Shorted 24 V fuse on the PSU. Defective interlock system. |
| Remedy: | • Replace the motor. • Reconnect the connector. • Replace the harness. • Shorted 24 V fuse on the PSU. • Repair the interlock system. |
| Error code: | 410-00 |
| Description: | Quenching lamp error At the completion of auto process control initialization, the potential of the drum surface detected by the potential sensor is more than -400V, the prescribed value. |
| Causes: | • Quenching lamp defective • Quenching lamp harness disconnected • Quenching lamp connector loose, defective |
| Error code: | 440-01 |
| Description: | Transfer output abnormal (voltage leak detected) When the transfer is output, the feedback voltage remains higher than 4V for 60 ms. |
| Causes: | • Transfer power pack defective • Transfer current terminal, transfer power pack disconnected, damaged connector |
| Error code: | 440-02 |
| Description: | Transfer output abnormal release detection When the transfer is output, there is hardly any feedback voltage within 60 ms even with application of 24% PWM. |
| Causes: | • Transfer power pack defective • Transfer unit harness disconnected • Transfer connector loose, defective |
| Error code: | 495-00 |
| Description: | Toner recycling unit error Encoder pulse does not change for 3 s after the main motor switches on. |
| Causes: | • Waste toner transport has stopped due to motor overload • Toner end sensor detective, disconnected |
| Error code: | 496-00 |
| Description: | Toner collection bottle error The toner collection bottle set switch remains off when the front door is closed. |
| Causes: | • No toner collection bottle set • Poor connection of the switch connector |
| Error code: | 501 |
| Display: | Service Call 501: Error |
| Description: | Tray 1 must be rebuilt |
| Causes: | Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection. Motor overload. Defective motor. Loose connection. Broken harness. Defective IOB. Too much paper in the tray. Paper or other material is jammed in the parts between the tray and motor. |
| Remedy: | • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB. |
| Error code: | 502 |
| Display: | Service Call 502: Error |
| Description: | Tray 2 must be rebuilt |
| Causes: | Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection. Motor overload. Defective motor. Loose connection. Broken harness. Defective IOB. Too much paper in the tray. Paper or other material is jammed in the parts between the tray and motor. |
| Remedy: | • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB. |
| Error code: | 503 |
| Display: | Service Call 503: Error |
| Description: | Tray 3 must be rebuilt |
| Causes: | (A model other than D581) Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection. (D581) Defective stack transport clutch or connector disconnection. Transfer motor error/disconnection. Defective end fence home position sensor or connector disconnection. Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection. Pickup SOL error/disconnection. Right tray sensor error/disconnection. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 504 |
| Description: | Tray 4 must be rebuilt |
| Causes: | The 2nd tray of D580, 1st tray of D580 when D579 and D580 are attached, the bottom D579 when two units of D579 are attached, or D631 when D581 and D631 are attached. Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection D581 when D579 and D581 are attached.Defective stack transport clutch or connector disconnection. Transfer motor error/disconnection. Defective end fence home position sensor or connector disconnection. Defective tray lift motor or connector disconnection. Defective upper limit sensor or connector disconnection. Pickup SOL error/disconnection. Right tray sensor error/disconnection. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 510 |
| Display: | SYSTEM HALT (*) 510 : X ORGIN |
| Description: | Replace green developer |
| Causes: | • Tray lift motor defective or connector disconnected • Lift sensor defective or disconnected • Pick-up solenoid defective or disconnected • Paper end sensor defective |
| Remedy: | 1. Check the harness connection or replace it. 2. Replace the bypass tray lift motor. 3. Replace the bypass upper limit sensor. 4. Replace the bypass lower limit sensor. 5. Check or clear obstacles around the bypass pick-up solenoid. |
| Error code: | 515-00 |
| Description: | Duplex jogger motor error 1 When the jogger fence moves to the home position, the jogger HP sensor does not turn on even if the jogger fence motor has moved the jogger fence 153.5 mm. |
| Causes: | • Paper or other obstacle has jammed mechanism • Sensor connector disconnected or defective • Sensor defective |
| Error code: | 516-00 |
| Description: | Duplex jogger motor error 2 When the jogger fence moves from the home position, the jogger fence HP sensor does not turn off even if the jogger motor has moved the jogger fence 153.5 mm. |
| Causes: | • Paper or other obstacle has jammed mechanism • Sensor connector disconnected or defective • Sensor defective |
| Error code: | 530-00 |
| Description: | Cooling fan error The fan motor lock (rotating state) signal is sampled 30 times at 100 ms intervals and the fan goes into an unstable rotating state at least ten times. (No error detection occurs for two seconds after the start of the fan or after changing the speed.) |
| Causes: | - Failed fan motor. - Disconnected connector. |
| Remedy: | - Replace the fan motor. - Check the connector. |
| Error code: | 540-01 |
| Description: | Fusing exit motor error The PLL lock signal was low for 2 s during motor operation. |
| Causes: | • Motor lock caused by physical overload • Motor drive PCB defective |
| Error code: | 540-02 |
| Description: | Fusing web motor error 1 The amount of current detected during operation of the web motor exceeded 350 mA in 5 successive samples. |
| Causes: | • Motor connection loose, broken, defective • Motor disconnected • Motor lock or short |
| Error code: | 540-03 |
| Description: | Fusing web motor error 2 SC540-02 has occurred three times and the machine has shut down automatically due to failure of the web motor. |
| Causes: | • Web motor harness loose, broken, defective • Web motor disconnected • Web motor defective |
| Error code: | 540-04 |
| Description: | Fusing web motor error 3 SC540-02 has occurred at total of 10 times and the machine has shut down automatically due to failure of the web motor. |
| Causes: | • Web motor harness loose, broken, defective • Web motor disconnected • Web motor defective |
| Error code: | 541 |
| Description: | Thermistor Error |
| Causes: | The thermistor output is less than 0°C for 7 seconds. |
| Remedy: | • Disconnected thermistor • Defective harness connection 1. Check the harness connection of the thermistor. 2. Replace the fusing unit. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 542-001 |
| Description: | Fusing temperature warm-up error 1: Center themistor The center thermistor that touches the hot roller determined that the hot roller failed to reach the warm-up temperature within the prescribed time. |
| Causes: | • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat has opened |
| Error code: | 542-002 |
| Description: | Fusing temperature warm-up error 2: Center themistor The center thermistor that touches the hot roller determined that the hot roller failed to reach 100 within the prescribed time. |
| Causes: | • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat has opened |
| Error code: | 542-003 |
| Description: | Fusing temperature warm-up error 3: Center themistor The center thermistor that touches the hot roller determined that the hot roller failed to reach 100 within the prescribed time. |
| Causes: | • Fusing lamp disconnected • Thermistor warped, out of position • Thermostat has opened |
| Error code: | 543 |
| Description: | High Temperature Detection Error |
| Causes: | This SC is issued if one of following conditions occurs: • The thermistor (center) detects 255?XC or thermistor (end) detects 245?XC. • The thermistor (center) detects a 3?XC increment or more for five seconds at 220?XC or more or the thermistor (end) detects a 4?XC increment or more for five seconds at 210?XC or more.ne |
| Remedy: | • Defective I/O control (EGB) • Defective EGB 1. Replace the EGB • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 544 |
| Description: | Fusing Temperature: Error 2 (Hardware Detection) The fusing thermistor that monitors the temperature of the hot roller detected a fusing temperature of 235oC (455oF), due to a Triac short which interfered with fusing temperature control. |
| Causes: | • MCU defective • PSU defective • Fusing unit defective |
| Error code: | 545 |
| Description: | Heating Lamp Full-Power Error |
| Causes: | The fusing lamp is fully-powered for a certain time while the fusing unit stays in the stand-by mode and is not rotating. |
| Remedy: | • Deformed thermistor • Thermistor not in the correct position • Defective fusing lamp 1. Replace the fusing unit. 2. Replace the fusing lamp. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 547-01 |
| Description: | Zero-crossing error (adhered relay contact) When the fusing relay is in an OFF state, a "zero-crossing interrupt request" occurs in 50 ms. |
| Causes: | Damaged fusing relay (adhered contact) |
| Remedy: | • Turn the main power OFF and then ON. • Replace the harness. • Replace the PC board. • Replace the PSU. |
| Error code: | 547-02 |
| Description: | Zero-crossing error (bad relay contact) If a "zero-crossing interrupt request" does not occur when the fusing relay is in an ON state, an error results. |
| Causes: | - Damaged fusing relay (open contact) - Failed fusing relay drive circuit - PSU fuse (24VS) blown |
| Remedy: | • Turn the main power OFF and then ON. • Replace the harness. • Replace the Engine Board. • Replace the PSU. • Replace the fuse. |
| Error code: | 547-03 |
| Description: | Zero-crossing error (low frequency error) The number of zero-crossing interrupts does not reach a certain value in 500 ms. |
| Causes: | The frequency of the commercial power supply line is unstable. |
| Remedy: | • Turn the main power OFF and then ON. • Check the commercial power supply line. • Replace the harness. • Replace the Engine Board. • Replace the PSU. |
| Error code: | 551 |
| Description: | Pressure roller center thermistor error 1. During the hot roller temperature control sequence, or while the hot roller and pressure roller were rotating, the pressure roller center thermistor measured a value higher than 3.3V 10 consecutive times at 600 ms intervals. |
| Causes: | • Pressure roller center thermistor not positioned properly • Pressure roller center thermistor connector loose, broken, defective • Pressure roller center thermistor defective • MCU defective |
| Error code: | 552-01 |
| Description: | Fusing reload temperature error 1: End thermistor The end thermistor (contact type) could not detect: • 100°C 25 seconds after the start of the warm-up cycle. • A change in temperature more than 16 degrees for 5 seconds. • The reload temperature with 56 seconds after the start of the fusing temperature control cycle. |
| Causes: | • Fusing lamp disconnected • Thermistor connector loose, broken, defective • Thermistor out of position, installed incorrectly • Thermostat open |
| Remedy: | • Replace the thermistor (end). • Clear this SC by executing SP5-810-001. |
| Error code: | 552-02 |
| Description: | Fusing (End) thermistor not reloaded 1 The heating (End) thermistor does not reach 80 deg C 7.7 seconds after the start of heat control (during normal startup control) |
| Causes: | • Stained thermopile lens • Deformed or floating thermistor • Input voltage out of range • The overtemperature prevention mechanism started working |
| Remedy: | • Clear the SP: fusing SC. • Replace the Fusing Unit. |
| Error code: | 552-03 |
| Description: | Fusing (End) thermistor not reloaded 2 The heating (End) thermistor does not reach 80 deg C 7.7 seconds after the start of heat control (during normal startup control) |
| Causes: | • Stained thermopile lens • Deformed or floating thermistor • Input voltage out of range • The overtemperature prevention mechanism started working |
| Remedy: | • Clear the SP: fusing SC. • Replace the Fusing Unit. |
| Error code: | 553 |
| Description: | Pressure roller center thermistor error 2 During the hot roller temperature control sequence, the pressure roller center thermistor measures a value lower than 0.2V. |
| Causes: | • Pressure roller center thermistor not positioned properly • Pressure roller center thermistor connector loose, broken, defective • Pressure roller center thermistor defective • MCU defective |
| Error code: | 555 |
| Description: | Fusing Heater error: End The fusing heater keeps full power for 9 seconds or more. |
| Causes: | Defective thermistors. Broken heater cables. |
| Error code: | 557 |
| Description: | Zero Cross Frequency Error |
| Causes: | The detection error occurs ten times consecutively in ten zero cross signal detections. This error is defined when the detected zero cross signal is 17 or less/27 or more for 0.2 seconds. |
| Remedy: | • Defective fusing lamp relay • Unstable input power source 1. Check the power supply source. 2. Replace the fusing unit. 3. Turn the main power switch off and on. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. The power should be turned off and on after the recovery procedure. |
| Error code: | 559 |
| Description: | Consecutive Fusing Jam |
| Causes: | The paper jam counter for the fusing unit reaches 3. The paper jam counter is cleared if the paper is fed correctly. This SC is activated only when this function is enabled with "Engine Maintenance" (default "OFF"). |
| Remedy: | • Defective fusing unit • Defective fusing control 1. Clear this SC to send a command after a jam removal. 2. Turn off this function after a jam removal. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 569 |
| Description: | Pressure roller contact sensor error Pressure roller contact sensor does not detect the pressure roller position three times. |
| Causes: | • Broken or defective pressure roller contact sensor • Deformed or broken pressure roller contact sensor feeler • Defective pressure roller contact motor • Defective fusing unit |
| Remedy: | 1. Check or replace the harness of the pressure roller contact sensor. 2. Replace the pressure roller contact sensor. 3. Replace the pressure roller contact motor. |
| Error code: | 590-00 |
| Description: | Toner collection motor error The toner collection motor sensor output does not change for 3 s while the toner collection motor is on. |
| Causes: | • Motor lock due to obstruction • Motor driver board defective • Motor connection loose, defective • Toner collection motor sensor disconnected, sensor defective • Rotational transmission shaft (dia. x 30) missing |
| Error code: | 620-01 |
| Description: | BCU-ADF Communication Error: Break RX abnormal A BREAK was detected after connection. |
| Causes: | • ADF I/F cable connection loose, broken, defective • ADF control board defective • BCU defective • Serial line level unstable • External noise on the line |
| Remedy: | • Check if all connectors related to ADF are connected securely. Reconnect the connectors if they are disconnected, or loose. • Check for the existence of noise or software bugs in the machine and ADF firmware. Run the firmware update when a new firmware is released. • Check the harness. Replace the harness if it is disconnected, or damaged. • Check for MPU malfunction and replace the MPU if any abnormalities exist. • Check if there are any signs of a short circuit on the ADF Main Board. If there are any defects, replace the board. |
| Error code: | 620-2 |
| Description: | BCU-ADF Communication Error: Timeout |
| Causes: | • ADF I/F cable connection loose, broken, defective • ADF control board defective • BCU defective • Serial line level unstable • External noise on the line |
| Error code: | 621-01 |
| Description: | BICU/Finisher communication error: Break error During communication with the finisher MBX, the BICU received a break (Low) signal from the finisher. |
| Causes: | • Connection between main machine loose, broken, defective • Breaker switch defective • Power cord loose, broken, defective • Peripheral unit control board defective |
| Error code: | 621-02 |
| Description: | BCU/Finisher communication error: Timeout error During communication between the finisher MBX and the BCU, no ACK signal was detected for 100 ms, even after three attempts. |
| Causes: | • Connection between main machine loose, broken, defective • Breaker switch defective • Power cord loose, broken, defective • Peripheral unit control board defective • BCU defective • Serial line level unstable, external noise on the line |
| Error code: | 623 |
| Description: | 2nd Paper Bank communication error An error code is issued from the paper bank unit. |
| Causes: | Loose connection. Defective paper bank. |
| Remedy: | • Reconnect the connector. • Replace the paper bank. • Turn the main power switch off and on. |
| Error code: | 626-01 |
| Description: | BICU, LCT communication error: Break reception error During communication with the LCT, the BICU received a break (Low) signal. |
| Causes: | • LCT connection to main machine loose, broken, defective • LCT control board defective • BCU defective • Serial line connection unstable • External noise on the line |
| Error code: | 626-02 |
| Description: | BICU, LCT communication error: Timeout error After 1 data frame is sent to the LCT, an ACK signal is not received within 100 ms, and is not received after 3 retries. |
| Causes: | • LCT connection to main machine loose, broken, defective • LCT control board defective • BCU defective • Serial line connection unstable • External noise on the line |
| Error code: | 632 |
| Description: | Key/card counter device error 1 After 1 data frame is sent to the device, an ACK signal is not received within 100 ms, and is not received after 3 retries. |
| Causes: | • Serial line from the device to the main machine is unstable, disconnected, or defective |
| Error code: | 633 |
| Description: | Key/card counter device error 2 During communication with the device, the MCU received a break (Low) signal. |
| Causes: | • Serial line from the device to the main machine is unstable, disconnected, or defective |
| Error code: | 634 |
| Description: | Key/card counter device error 3 The backup battery of the counter device RAM is low. |
| Causes: | • RAM backup battery exhausted • Counter device defective |
| Error code: | 635 |
| Description: | Key/card counter device error 4. After installation of the device a message alerts user to a battery voltage abnormal error. |
| Causes: | • Device control board defective • Device control board backup battery defective |
| Error code: | 636-01 |
| Description: | SD Card Error. Expanded authentication module error There is no expanded authentication module in the machine. The SD card or the file of the expanded authentication module is broken. There is no DESS module in the machine. |
| Causes: | • No expanded authentication module • Defective SD card • No DESS module |
| Remedy: | 1. Install the expanded authentication module. 2. Install the SD card. 3. Install the DESS module. |
| Error code: | 636-02 |
| Description: | IC card error When the version of the expanded authentication module is not correct. |
| Causes: | The version of the expanded authentication module is not correct. |
| Remedy: | Install the correct expanded authentication module. |
| Error code: | 636-11 |
| Description: | SD Card Error. OSM user code file error |
| Causes: | The correct "usercode" file could not be found in the root folder of the SD card because the file is not present, or the existing file is corrupted or the wrong type file. |
| Remedy: | Create the usercode files with the User Setting Tool "IDissuer.exe" and store the files in the root folder of the SD card. • Make sure the eccm.mod file is in the root folder of the SD card. |
| Error code: | 637-01 |
| Description: | Tracking Information notification Error (Tracking application error) Tracking information was lost. |
| Causes: | • Tracking SDK application error • Internal notification error |
| Remedy: | Cycle the main power off and on. |
| Error code: | 637-02 |
| Description: | Tracking Information notification Error (Management server error) Tracking information was lost. |
| Causes: | Communication with tracking management server failed. • Network error • tracking management server error • Tracking SDK application error |
| Remedy: | Cycle the main power off and on. |
| Error code: | 640 |
| Description: | Communication error: Engine Controller (Check sum error) Sum value is added each command frame. Sum check means: STX xx xx xx xx sum ETX -> The least significant 7 bits of xx + xx + xx+ xx is compared with the sum Example: STX 80h 81h 82h 83h 06h ETX -> 80h + 81h + 82h + 83h = 206h If sum value is 06h, data is correct. This SC is not displayed when it occurs; count is executed only by logging. |
| Causes: | Hard error with PCI |
| Remedy: | 1. Turn the main switch off and on. |
| Error code: | 641 |
| Description: | BICU control data transfer abnormal A sampling of the control data sent from the BICU reveals an abnormality. |
| Causes: | • Defective controller board • External noise • Defective BCU |
| Remedy: | 1. Replace the controller board. 2. Replace the BCU. |
| Error code: | 650-01 |
| Description: | Remote Service Modem Communication Error (Dialup authentication failure) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP). |
| Causes: | • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected |
| Remedy: | Check the following SPs. • SP5-816-156 (Remote Service: Dial Up User Name) • SP5-816-157 (Remote Service: Dial Up Password) |
| Error code: | 650-04 |
| Description: | Remote Service Modem Communication Error (dialup failing because of incorrect modem configuration) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP). |
| Causes: | • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected |
| Remedy: | Software bug. |
| Error code: | 650-05 |
| Description: | Remote Service Modem Communication Error (insufficient current or connection fault) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because it can be referenced using SP). |
| Causes: | • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected |
| Remedy: | The line is not supported and nothing can be done. |
| Error code: | 650-13 |
| Description: | Remote Service Modem Communication Error (RC Gate Type M was installed but modem is not present (detected during operation)) • An error related to communication (dialup connection, modem board etc.) using the RC Gate Type M was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because this error can be referred by using SP). |
| Causes: | • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected |
| Remedy: | • If a modem board is not installed, install it. • Check again if the modem driver configurations (SP5-816-160, SP5-816-165 to 171, and SP5-816-165 to 171) are correct. • If the problem is not solved, replace the modem. |
| Error code: | 650-14 |
| Description: | Remote Service Modem Communication Error (RC Gate Type N was installed but modem is present or wired/wireless LAN is not working correctly) • An error related to communication (dialup connection, modem board etc.) using the RC Gate was detected or an error that prevents RC Gate operation was detected at power on. • Displayed only when an error is detected while RC Gate is operating. • SC is not issued if an error occurs during RC Gate installation (because this error can be referred by using SP). |
| Causes: | • SP settings invalid • Modem connector disconnected • Modem board disconnected • Wireless LAN card disconnected |
| Remedy: | • If a modem board is attached, remove it. • Check if wired/wireless LAN works. |
| Error code: | 651-01 |
| Description: | Illegal Remote Service Dial-up (Chat program parameter error) An unexpected error occurred when RC Gate Type M dialed up the NRS Center. |
| Causes: | Software bug |
| Remedy: | Logging only. |
| Error code: | 652 |
| Description: | Remote service ID2 mismatching ID2 for @Remote certification is mismatching between the controller board and NVRAM. Used controller board installed. Used NVRAM installed An unexpected error occurs when the modem (Embedded RCG-M) tries to call the center with a dial up connection. |
| Causes: | If this occurs during the @Remote installation • Check the NVRAM`s validity and serial number, write the common certificate, and then retry the installation. If this occurs after the @Remote installation • Clear the current @Remote setting, check the NVRAM`s validity and serial number, write the common certificate, and then retry the installation. |
| Error code: | 653 |
| Description: | Incorrect remote service ID2 If one of the following applies to the ID2 recorded in the NVRAM: • The character string is not 17 characters long. • Unprintable characters are included. • It contains spaces only. • It is blank. |
| Remedy: | • Replace the NVRAM • Clear the current @Remote setting, write the common certificate, and then retry the installation. |
| Error code: | 670 |
| Description: | Engine startup error The MCU failed to respond within the prescribed time when the machine was turned on. |
| Causes: | • Connections between MCU and controller board are loose, disconnected, or damaged • MCU defective • Controller board defective |
| Error code: | 671 |
| Description: | Engine board mismatch error Engine board and controller mismatch detected. |
| Causes: | • Wrong engine board installed. • Wrong controller board installed. • Check the type of engine board and controller board. |
| Remedy: | 1. Replace the BCU. 2. Replace the controller board. |
| Error code: | 672 |
| Description: | Controller startup error After power on, the line between the controller and the operation panel did not open for normal operation. -or- After normal startup, communication with the controller stopped. |
| Causes: | • Controller installed incorrectly • Controller board defective • Operation panel harness disconnected or defective |
| Error code: | 700-01 |
| Description: | ADF original table lift malfunction One of the following conditions was detected. • The bottom plate position sensor does not activate when the bottom plate motor lifts the original table. • The bottom plate HP sensor does not activate when the bottom plate motor lowers the original table. |
| Causes: | • Loose, broken or defective harnesses, connectors of the bottom plate position sensor, bottom plate HP sensor, bottom plate motor • Defective bottom plate position sensor • Defective bottom plate HP sensor • Defective bottom plate motor • Defective ADF main control board |
| Remedy: | Bottom plate motor rotation: 1. Check or replace the bottom plate position sensor. 2. Check or replace the bottom plate HP sensor. No bottom plate motor rotation: 1. Replace the bottom plate motor. 2. Replace the ADF main control board. |
| Error code: | 700-02 |
| Description: | Original pick-up HP error When the pick-up motor turns on clockwise, the original pick-up HP sensor does not detect the home position of the original calling. |
| Causes: | • Defective original pick-up HP sensor • Defective pick-up motor • Defective DF drive board |
| Remedy: | 1. Replace the DF drive board if the pick-up motor does not work correctly. 2. Replace the pick-up motor. 3. Replace the original pick-up HP sensor. |
| Error code: | 720-01 |
| Description: | Downstream finisher communication error No response signal was received from the downstream finisher (D611/D612) after 3 attempts |
| Causes: | • Finisher I/F cable loose, broken defective • Finisher control board defective |
| Error code: | 720-24 |
| Description: | Finisher exit guide plate motor error After moving away from the guide plate position sensor, the exit guide is not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Guide plate motor disconnected, defective. Guide plate motor overloaded due to obstruction. Guide plate position sensor disconnected, defectivelay. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-25 |
| Description: | Finisher punch motor error The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Punch HP sensor disconnected, defective. Punch motor disconnected or defective. Punch motor overload due to obstruction. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-30 |
| Description: | Finisher jogger motor error The jogger fences move out of the home position but the HP sensor output does not change within the specified number of pulses. The 1st failure issues an original jam message, and the 2nd failure issues this SC code. |
| Causes: | Jogger HP sensor disconnected, defective. Jogger motor disconnected, defective. Jogger motor overloaded due to obstruction. Finisher main board and jogger motor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-41 |
| Description: | Stack feed-out motor error The stack feed-out HP sensor does not detect the home position of the stack feed-out belt within the specified time after the stack feed-out belt has moved to its home position. The stack feed-out HP sensor does not turn off 200 ms after the stack feed-out belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | Defective motor. HP sensor disconnected, defective. Motor harness disconnected, loose, defective. Motor overload. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-42 |
| Description: | Finisher stapler movement motor error The stapler does not return to its home position within the specified time after stapling. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | Motor overload. Loose connection of the stapler home position sensor. Loose connection of the stapler movement motor. Defective stapler home position sensor. Defective stapler movement motor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-43 |
| Description: | Finisher corner stapler rotation motor error The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective stapler rotation motor. Loose connection of the finisher corner stapler rotation motor. Overload to the stapler rotation motor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-44 |
| Description: | Finisher corner stapler motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. Staple movement is not finished after a certain time. |
| Causes: | Staple jam. Loose connection. An overload has occurred due to staples applied to sheets exceeding the maximum number. Defective home position sensor. Defective stapler motor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-52 |
| Description: | Finisher folder plate motor error The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Folder plate HP sensor disconnected, defective. Folder plate motor disconnected, defective. Folder plate motor overloaded due to obstruction. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-53 |
| Description: | Fold unit bottom fence motor error The bottom fence of the fold unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Motor harness disconnected, loose, defective. Motor overload. Defective motor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-55 |
| Description: | Clamp roller retraction motor error The clamp roller retraction motor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective motor. Loose connection. Motor overload. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-57 |
| Description: | Stack junction gate motor error The stack junction gate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective motor. Loose connection. Motor overload. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-60 |
| Description: | Booklet stapler motor error 1 The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. The front stapler unit saddle-stitch motor does not start operation within the specified time. |
| Causes: | Staple jam. Defective motor. Loose connection. An overload has occurred due to staples applied to sheets exceeding the maximum number. Defective home position sensor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-61 |
| Description: | Booklet staple motor error 2 The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. The rear stapler unit saddle-stitch motor does not start operation within the specified time. |
| Causes: | Staple jam. Defective motor. Disconnected connector. An overload has occurred due to staples applied to sheets exceeding the maximum number. Defective home position sensor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-70 |
| Description: | Tray lift motor error The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers. |
| Causes: | Defective motor. Loose connection. Motor overload. Defective upper tray paper height sensor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-71 |
| Description: | Finisher Tray 1 shift motor error The shift roller HP sensor of the upper tray does not activate within the prescribed time after the shift tray starts to move toward or away from the home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective motor. Loose connection. Motor overload. Defective home position sensor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-72 |
| Description: | Exit jogger motor 1 error The Exit jogger motor 1 moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | Exit jogger motor sensor disconnected, defective. Exit jogger motor is disconnected, defective. Exit jogger motor overloaded due to obstruction. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-73 |
| Description: | Exit jogger motor 2 error The Exit jogger motor 2 moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | Exit jogger motor sensor disconnected, defective. Exit jogger motor is disconnected, defective. Exit jogger motor overloaded due to obstruction. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-74 |
| Description: | Exit jogger evacuate motor error The Exit jogger evacuate motor moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | Exit jogger evacuate motor sensor disconnected, defective. Exit jogger evacuate motor is disconnected, defective. Exit jogger evacuate motor overloaded due to obstruction. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-75 |
| Description: | Stacking sponge roller motor Occurs during the operation of the stacking sponge roller motor. |
| Causes: | Defective motor. Motor harness disconnected, loose, defective Motor overloaded. Defective stacking roller HP sensor. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-80 |
| Description: | Punch movement motor error The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective motor. Motor harness disconnected, loose, defective. Motor overloaded. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-81 |
| Description: | Paper position sensor slide motor error The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | Defective motor. Disconnected, loose or defective harness. Motor overloaded. |
| Remedy: | Turn the main power switch off and on. |
| Error code: | 720-87 |
| Description: | Finisher punch motor error (D611/D612) The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Punch HP sensor disconnected, defective • Punch motor disconnected, defective • Punch motor overload due to obstruction |
| Error code: | 722-01 |
| Description: | Downstream finisher communication error No response signal was received from the downstream finisher (D610) after 3 attempts |
| Causes: | • Finisher I/F cable loose, broken defective • Finisher control board defective |
| Error code: | 722-10 |
| Description: | 1000-Sheet Finisher Error. Upper transport motor error The upper transport motor in the finisher is not operating. |
| Causes: | • The motor harness is loose or broken • Upper transport motor disconnected, defective • Upper transport motor overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-24 |
| Description: | 1000-Sheet Finisher Error. Finisher exit guide plate motor error • The exit guide plate HP sensor does not detect the home position of the exit guide plate within the prescribed time after the exit guide plate has moved to its home position. • The exit guide plate HP sensor does not turn off within the prescribed time after the exit guide plate has moved from its home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Exit guide plate motor harness loose, broken • Exit guide plate HP sensor harness loose, broken • Exit guide plate motor disconnected, defective • Exit guide plate HP sensor disconnected, defective • Finisher exit guide plate motor drive overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-25 |
| Description: | Punch motor error (D610) After the punch operation, the punch HP sensor did not detect the punch unit at the home position. |
| Causes: | • Punch motor connection loose, broken, defective. • Punch overload (blocked by obstruction) • Home position sensor connection loose, broken, defective • HP sensor defective |
| Error code: | 722-30 |
| Description: | 1000-Sheet Finisher Error. Jogger fence motor error • The jogger HP sensor does not detect the home position of the jogger fences within the prescribed time after the jogger fences have moved to its home position. • The jogger HP sensor does not turn off within the prescribed time after the jogger fences have moved from its home position. The 1st failure issues an original jam message, and the 2nd failure issues this SC code. |
| Causes: | • The motor harness is loose or broken • Jogger fence HP sensor harness loose, broken • Jogger fence motor disconnected, defective • Jogger fence HP sensor disconnected, defective • Jogger motor drive overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-33 |
| Description: | Finisher staple hammer motor error (D610) The staple hammer motor did not return to the home position within the prescribed time (340 ms). |
| Causes: | • Staple hammer HP sensor loose, broken, defective • Electrical overload on the stapler drive PCB elect • Staple hammer motor defective • Finisher main board defective |
| Error code: | 722-35 |
| Description: | Stack Plate Motor Error 1: Front Motor(D610) The stack plate HP sensor (front) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | If the motor is operating • Front stack plate HP sensor harness loose, broken, defective • Front stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective |
| Error code: | 722-36 |
| Description: | Stack Plate Motor Error 2: Center Motor (D610) The stack plate HP sensor (center) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | If the motor is operating • Center stack plate HP sensor harness loose, broken, defective • Center stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective |
| Error code: | 722-37 |
| Description: | Stack Plate Motor Error 3: Rear Motor (D610) The stack plate HP sensor (rear) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | If the motor is operating • Rear stack plate HP sensor harness loose, broken, defective • Rear stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective |
| Error code: | 722-39 |
| Description: | Jogger Top Fence Motor (D610) The top fence HP sensor detected that: The top fence did not arrive at the home position within the specified number of pulses. -or- The top fence failed to leave the home position within the specified number of pulses. |
| Causes: | If the jogger top fence motor is operating: • Top fence HP sensor harness loose, broken, defective • Top fence HP sensor defective If the jogger top fence motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Finisher main board defective |
| Error code: | 722-40 |
| Description: | Jogger Bottom Fence Motor (D610) The bottom fence HP sensor detected that: The bottom fence did not arrive at the home position at the specified time. -or- The bottom fence failed to leave the home position at the specified time. |
| Causes: | If the jogger bottom fence motor is operating: • Bottom fence HP sensor harness loose, broken, defective • Bottom fence HP sensor defective If the jogger bottom fence motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Finisher main board defective |
| Error code: | 722-41 |
| Description: | 1000-Sheet Finisher Error. Feed-out belt motor error • The feed-out HP sensor does not detect the home position of the feed-out belt within the prescribed time after the feed-out belt has moved to its home position. • The feed-out HP sensor does not turn off within the prescribed time after the feedout belt has moved from its home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | • Feed-out belt motor harness loose or broken • Feed-out belt HP sensor harness loose or broken • Feed-out belt motor disconnected, defective • Feed-out belt HP sensor disconnected, defective • Feed-out belt motor drive overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-42 |
| Description: | 1000-Sheet Finisher Error. Stapler movement motor • The stapler HP sensor does not detect the home position of the stapler within the prescribed time after the stapler has moved to its home position. • The stapler HP sensor does not turn off within the prescribed time after the stapler has moved from its home position. The 1st detection failure issues a jam error, and the 2nd failure causes this SC code. |
| Causes: | • Stapler movement motor harness loose or broken • Stapler HP sensor harness loose, broken • Stapler movement motor disconnected, defective • Stapler HP sensor disconnected, defective • Stapler or motor drive overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-43 |
| Description: | Finisher corner stapler rotation motor error (D610) The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Stapler rotation motor disconnected, defective • Stapler rotation motor overloaded due to obstruction • Stapler rotation HP sensor disconnected, defective |
| Error code: | 722-44 |
| Description: | 1000-Sheet Finisher Error. Corner stapler motor error • The corner stapler motor does not switch off within the prescribed time after operating. • The corner stapler HP sensor does not detect the home position of the corner stapler within the prescribed time after the corner stapler has moved to its home position. • The corner stapler HP sensor does not turn off within the prescribed time after the corner stapler has moved from its home position. The 1st detection failure issues a jam error, and the 2nd failure causes this SC code. |
| Causes: | • Staple jam • Corner stapler motor disconnected, defective • Corner stapler motor harness is loose or broken • Corner stapler HP sensor disconnected, defective • Number of sheets in stack exceeds allowed number of sheets for stapling • Stapler motor obstructed |
| Error code: | 722-70 |
| Description: | 1000-Sheet Finisher Error. Tray lift motor error The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code. |
| Causes: | • Tray lift motor disconnected, defective • Tray lift motor harness is loose or broken • Stack height sensor disconnected, defective • Tray lift motor overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-71 |
| Description: | 1000-Sheet Finisher Error. Shift tray motor error • The shift roller HP sensor does not detect the home position of the upper tray within the specified number of pulses after the upper tray has moved to its home position. • The shift roller HP sensor does not turn off within the specified number of pulses after the upper tray has moved from its home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Shift tray motor disconnected, defective • Shift tray motor harness is loose or broken • Shift tray HP sensor disconnected, defective • Shift tray motor overloaded due to obstruction (jammed paper, paper scraps, etc.) |
| Error code: | 722-72 |
| Description: | Front shift jogger motor error (D610) The sides fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Shift jogger motor disconnected, defective • Shift jogger motor overloaded due to obstruction • Shift jogger HP sensor disconnected, defective |
| Error code: | 722-74 |
| Description: | Shift jogger retraction motor error (D610) The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Motor harness disconnected, loose, defective • Motor defective • Motor overload • HP defective |
| Error code: | 722-75 |
| Description: | Return roller motor error (D610) Occurs during the operation of the lower tray pressure motor. |
| Causes: | • Motor harness disconnected, loose, defective • Motor overloaded • Home position sensor harness disconnected, loose, defective • Home position defective |
| Error code: | 722-80 |
| Description: | Finisher staple trimming hopper full (D610) The staple waste hopper is full of cut staples. |
| Causes: | • If the hopper is full, empty the hopper • If the hopper is not full, the hopper full sensor is disconnected, defective |
| Error code: | 722-81 |
| Description: | Finisher transport motor error (D610) The encoder pulse of the finisher transport motor does not change state (high/low) within 600 ms and does not change after 2 retries. |
| Causes: | • Finisher transport motor defective • Transport motor harness disconnected, or defective • Finisher main board defective |
| Error code: | 722-83 |
| Description: | Finisher punch motor error (D610) The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Punch HP sensor disconnected, defective • Punch motor disconnected, defective • Punch motor overload due to obstruction |
| Error code: | 724-71 |
| Description: | Finisher tray shift motor error (with the side tray installed) The shift roller HP sensor of the upper tray does not activate within the prescribed time after the shift tray starts to move toward or away from the home position. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | • Shift tray HP sensor of the upper tray disconnected, defective • Shift tray motor of the upper tray is disconnected, defective • Shift tray motor of the upper tray overloaded due to obstruction |
| Remedy: | • Check the connections and cables for the components mentioned above. • Check for blockages in shift motor mechanism. • Replace the shift tray HP sensor and/or shift motor • Replace the finisher main board. |
| Error code: | 725-01 |
| Description: | Downstream finisher communication error (D615) No response signal was received from the downstream finisher (D615) after 3 attempts |
| Causes: | • Finisher I/F cable loose, broken defective • Finisher control board defective |
| Error code: | 725-12 |
| Description: | Reg. Roller Transport Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 725-13 |
| Description: | Dynamic Roller Transport Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 725-14 |
| Description: | Z-fold top tray exit motor error The motor driver detects an error. |
| Causes: | • Motor over current • Motor driver overheat |
| Error code: | 725-30 |
| Description: | Z-fold stopper 1 Motor error The bottom fence HP sensor detected that: The bottom fence did not arrive at the home position at the specified time. -or- The bottom fence failed to leave the home position at the specified time. |
| Causes: | • Motor over-current • Motor driver overheat • Motor harness loose |
| Error code: | 725-31 |
| Description: | 2nd Stopper Motor Error Multi Folder (D615) The 2nd stopper HP sensor did not detect the 2nd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • 2nd stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 2nd stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-32 |
| Description: | 3rd Stopper Motor Error Multi Folder (D615) The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • 3rd stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 3rd stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-33 |
| Description: | Jogger Fence Motor Multi Folder (D615) The jogger fence HP sensor did not detect the jogger fence in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • Jogger fence HP sensor dirty • Sensor harness or connector loose, broken, defective • Jogger fence motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-34 |
| Description: | Dynamic Roller Lift Motor Error Multi Folder (D615) The dynamic roller HP sensor did not detect the dynamic roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • Dynamic roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Dynamic roller lift motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-35 |
| Description: | Registration Roller Release Motor Error Multi Folder (D615) The registration roller HP sensor did not detect the registration roller in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • Registration roller HP sensor dirty • Sensor harness or connector loose, broken, defective • Registration roller release motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-36 |
| Description: | FM2 Direct-Send JG Motor Multi Folder (D615) The direct-send JG HP sensor did not detect the direct-send JG in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • FM2 direct-send JG HP sensor dirty • Sensor harness or connector loose, broken, defective • FM2 direct-send JG motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-37 |
| Description: | FM6 Pawl Motor Multi Folder (D615) The FM6 pawl HP sensor did not detect the FM6 pawl in (or out of) its home position. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • FM6 pawl HP sensor dirty • Sensor harness or connector loose, broken, defective • FM6 pawl motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-38 |
| Description: | Fold Plate Motor Error Multi Folder (D615) The fold plate HP sensor did not detect the fold plate in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • Fold plate HP sensor dirty • Sensor harness or connector loose, broken, defective • Fold plate motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 725-41 |
| Description: | Crease Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 725-71 |
| Description: | Horizontal Transport Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 725-72 |
| Description: | Horizontal exit motor error An error occurred on the motor drive board. |
| Causes: | • Motor current overload • Motor drive board defective (replace motor) |
| Error code: | 725-73 |
| Description: | Top Tray Exit Motor Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 725-74 |
| Description: | Entrance JG Motor Multi Folder (D615) The entrance junction gate HP sensor did not detect the entrance junction gate at (or out of) its home position. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code. |
| Causes: | • Entrance JG HP sensor dirty • Sensor harness or connector loose, broken, defective • Entrance JG motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective |
| Error code: | 740-10 |
| Description: | Cover interposer tray bottom plate motor error After the motor starts to raise the bottom plate, the bottom plate position sensor does not detect the plate at the specified time (3 s). After the motor starts to lower the bottom plate, the bottom plate HP sensor does not detect the bottom plate. |
| Causes: | • Bottom plate position sensor, disconnected, defective • Bottom plate HP sensor disconnected, defective |
| Error code: | 783-3 |
| Description: | 1st Fold Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 783-4 |
| Description: | 2nd Fold Motor Error Multi Folder (D615) The motor drive PCB detected an error at the motor. |
| Causes: | • Motor harness or connector loose, broken, defective • Motor or motor drive board defective |
| Error code: | 816 |
| Display: | SYSTEM HALT (*) 816 : FW/FROM WRC |
| Description: | Energy saving I/O sub-system error |
| Causes: | The energy saving I/O sub-system detects an error. • Defective energy saving I/O sub-system • The energy saving I/O sub-system detects a controller board error (No response) |
| Remedy: | • Turn the main power switch off and on. • Replace the controller board. |
| Error code: | 817 |
| Display: | SYSTEM HALT (*) 817 : FW/SaveArea |
| Description: | Monitor error This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted. |
| Causes: | OS Flash ROM data defective. SD card data defective. Change the controller firmware. Use another SD card. |
| Remedy: | • Change the controller firmware. • Use another SD card. |
| Error code: | 819 |
| Display: | SYSTEM HALT (*) 819 : FW/HROM SIZ |
| Description: | Service Cycle Power |
| Causes: | • Incorrect combination of EGB and controller board. • An unexpected error occurs in the EEPROM on the controller board. |
| Remedy: | • Controller board defective 1. Install the correct EGB and controller boards for this machine. 2. Replace the controller boardng fan |
| Error code: | 820 |
| Description: | Self-Diagnostic Error: CPU The CPU returned an unexpected error during the self-diagnostic test. |
| Causes: | • Controller board defective • Insufficient memory • Expanded memory defective |
| Error code: | 821 |
| Description: | Self-diagnostic error 2: ASIC The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate. |
| Causes: | • Controller board defective |
| Remedy: | For more details about this SC code error, execute SP5990 to print an SMC report so that you can read the error code. The error code is not displayed on the operation panel. |
| Error code: | 822 |
| Description: | Self-diagnostic error 3: HDD An error occurred when the self-check was performed when the machine was switched on after the HDD was replaced. (The diagnostic command was issued to the HDD device but the result was an error). |
| Causes: | • HDD defective • HDD harness disconnected, defective • Controller board defective |
| Error code: | 823 |
| Description: | USB/ Network Device Error |
| Causes: | An interface error in the USB connection or NIB connection occurs. |
| Remedy: | • Controller board detective 1. Replace the controller board. |
| Error code: | 824 |
| Display: | XY MOVE CTRL |
| Description: | EEPROM Error |
| Causes: | An EEPROM check error at power-on occurs. |
| Remedy: | • Controller board detective 1. Replace the controller board. |
| Error code: | 829 |
| Display: | SYSTEM HALT (*) 829 : FW/ERASE TIMEOV |
| Description: | Self-diagnostic Error 9: Optional RAM The optional RAM returned an error during the self-diagnostic test. |
| Causes: | • Replace the optional memory board • Controller board defective |
| Error code: | 833 |
| Display: | SYSTEM HALT (*) 833 : FW/PRN MDL |
| Description: | Self-diagnostic error 8: Engine I/F ASIC |
| Causes: | [0F30] [0F31] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU. [0F41] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU. |
| Error code: | 834 |
| Display: | SYSTEM HALT (*) 834 : FW/SV MDL |
| Description: | Self-diagnostic error 9: Optional Memory RAM DIMM 5101 The write/verify check for the optional RAM chip on the engine mother board gave an error. |
| Causes: | • Controller defective • Mother board defective |
| Remedy: | Replace the controller board. |
| Error code: | 838 |
| Display: | SYSTEM HALT (*) 838 : FW/SV MDL |
| Description: | Self-diagnostic Error 10: Clock Generator A verify error occurred when setting data was read from the clock generator via the I2C bus. |
| Causes: | • Replace the controller board |
| Error code: | 840 |
| Description: | EEPROM access error During the I/O processing, reading error is occurred. The 3rd reading failure issues this SC code. During the I/O processing, writing error is occurred. |
| Causes: | Defective EEPROM |
| Error code: | 841 |
| Description: | EEPROM read error Mirrored data of the EEPROM is different from the original data in EEPROM. |
| Causes: | Data in the EEPROM is overwritten for some reason. |
| Error code: | 842 |
| Description: | Service Scanner |
| Causes: | This error indicates that a scanner communications failure. |
| Remedy: | 1 Scanner control card to flatbed inteconnect card cable Check for correct installation of the scan control to flatbed interconnect card cable. 2 Motor drive card to flatbed interconnect card cable Check for correct installation of the motor driver card to flatbed interconnect card cable. 3 Motor driver card Flatbed interconnect card If the cables are good and are properly connected, replace the following FRUs in the order shown: • Flatbed interconnect card assembly • Motor driver card assembly |
| Error code: | 850 |
| Description: | Net I/F error Duplicate IP addresses. Illegal IP address. Driver unstable and cannot be used on the network |
| Causes: | • IP address setting incorrect • NIB (PHY) board defective • Controller board defective |
| Remedy: | Turn the main switch off and on. |
| Error code: | 851 |
| Description: | IEEE 1394 I/F Error IEEE1394 cannot be used due to a faulty driver setting or poor I/F connection. |
| Causes: | • Faulty PCI connection • IEEE1394 board defective • Controller board defective |
| Error code: | 853 |
| Description: | Wireless LAN Error 1 During machine start-up, the machine can access the board that holds the wireless LAN, but not to the wireless LAN card. |
| Causes: | • Wireless LAN card missing (was removed) |
| Error code: | 854 |
| Description: | Wireless LAN Error 2 During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth). |
| Causes: | • Wireless LAN card missing (was removed) |
| Error code: | 855 |
| Description: | Wireless LAN error 3 An error was detected on the wireless LAN card. |
| Causes: | • Wireless LAN card defective • Wireless LAN card connection incorrect |
| Error code: | 857 |
| Description: | USB I/F Error The USB driver is not stable and caused an error. |
| Causes: | • Poor USB card connection • Replace the controller board |
| Error code: | 858 |
| Description: | Data encryption conversion error (1) |
| Causes: | -01 A serious error has occurred during the data conversion performed for updating the key for data encryption. • The data in the USB flash drive is damaged. • A communication error has occurred due to electromagnetic waves or other noise. • Replace the controller board. * However, if it is "-30", the machine may recover by turning the main power switch off and then back on. -02 A Data encryption conversion error (2) A serious error occurs when data is encrypted to update an encryption key. Defective NVRAM Replace the controller board. -30 A Data encryption conversion error (3) A recoverable error has occurred before starting data conversion. Defective NVRAM • Turn the main switch off and on. • If the error reoccurs, replace the controller board. -31 A A serious error occurs while the data is encrypted. Same as SC991 Same as SC991 |
| Error code: | 859 |
| Description: | HDD data encryption error |
| Causes: | -01 B HDD check error • Hard disk data conversion has been selected, but the hard disk is not installed. • The hard disk is not mounted properly. • No HDD installed • Hard disk formatting is not completed. • The encryption key on the board and the actual encryption key in the hard disk do not match. • Install the HDD correctly. • Initialize the HDD with SP5-832-001. -02 B Power failure during data encryption. The data conversion in the NVRAM or hard disk has not completed successfully. Power interruption has occurred during the conversion of the data in the NVRAM or hard disk Initialize the HDD with SP5-832-001. -10 B Data Read/Write command error Due to time-out, serial communication error, or other problems in DMAC, an irregular DMAC return value has occurred consecutively two or more times Noise or other problems in the SATA connection Same as SC863 |
| Error code: | 860 |
| Description: | HDD startup error at power on HDD is connected but a driver error is detected. -or- The driver does not respond with the status of the HDD within 30 s. |
| Causes: | • HDD is not initialized • Level data corrupted • HDD is defective |
| Error code: | 861 |
| Description: | HDD re-try failure At power on the HDD was detected. Power supply to the HDD was interrupted after the system entered the energy save mode, but after the HDD was awakened from the energy save mode it did not return to the ready status within 30 sec. |
| Causes: | • Harness between HDD and controller board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective |
| Error code: | 862 |
| Description: | Bad sector number error The number of bad sectors in the HDD (image data area) goes over 101. |
| Causes: | • Defective HDD |
| Remedy: | Format the HDD with SP5832-001. Replace the HDD. |
| Error code: | 863 |
| Description: | HDD data read failure The data written to the HDD cannot be read normally, due to bad sectors generated during operation. |
| Causes: | • HDD defective |
| Remedy: | • If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM. • The next time the HDD is accessed, these bad sectors will not be accessed for read/write operation. The HDD will probably require replacement soon. |
| Error code: | 864 |
| Description: | HDD data CRC error. During HDD operation, the HDD cannot respond to a CRC error query. Data transfer did not execute normally while data was being written to the HDD. |
| Causes: | • HDD defective |
| Error code: | 865 |
| Description: | HDD access error HDD responded to an error during operation for a condition other than those for SC863, 864. |
| Causes: | • HDD defective |
| Error code: | 866 |
| Description: | SD card error 1: Confirmation error The machine detected an electronic license error in the application on the SD card in the controller slot immediately after the machine was turned on. |
| Causes: | • Program missing from the SD card |
| Error code: | 867 |
| Description: | SD card error 2: SD card removed The SD card in the boot slot when the machine was turned on was removed while the machine was on. |
| Causes: | • Insert the SD card • Turn the machine’s power off/on |
| Error code: | 868 |
| Description: | SD card error 3: SD card access An error occurred while an SD card was used. |
| Causes: | • SD card not inserted correctly • SD card defective • Controller board defective • To reformat the SC card, use SD Formatter Ver 1.1. |
| Error code: | 870 |
| Description: | Address book data error Address book data on the hard disk was detected as abnormal when it was accessed from either the operation panel or the network. The address book data cannot be read from the HDD or SD card where it is stored, or the data read from the media is defective. |
| Causes: | • Turn the machine power off/on. If this does not solve the problem, do the Procedure below. • HDD defective |
| Remedy: | 1. Do SP5846-50 (UCS Settings – Initialize all Directory Info.) to reset all address book data. 2. After 3 sec. reformat the HDD with SP5821-1. 3. Turn the main power switch off/on. |
| Error code: | 872 |
| Description: | HDD Mail Receive Error At power on the HDD unit was detected as defective. Data can be neither read nor written to the HDD. Note: This problem can occur if the machine is switched off while the HDD is being accessed. |
| Causes: | • Format the HDD with SP5832. • HDD defective, replace HDD (be sure to format the new HDD). |
| Error code: | 873 |
| Description: | HDD mail send data error An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD. |
| Causes: | • Do SP5832-1 to format the HDD • Replace the HDD |
| Error code: | 874 |
| Description: | Delete All error 1: HDD A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B735 running from the DOS SD card. |
| Causes: | • Turn the main switch off/on, do the operation again. • Install the Data Overwrite Security Unit again. • HDD defective |
| Error code: | 875 |
| Description: | Delete All error 2: Data area An error occurred when the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B735 running from the DOS SD card. |
| Causes: | • Turn the main switch off/on and try the operation again. |
| Error code: | 876 |
| Description: | Log Data Errors A problem occurred with the log data at power on or while the machine was operating. |
| Causes: | 1 Log Data Error 1 Log data file corrupted. Occurs at power on or during machine operation. • Format the HDD with SP5832 2 Log Data Error 2 Log data encryption has been enabled but the encryption module has not been installed. Occurs at power on, during machine operation, or after enabling encryption of log data. • Replace the encryption module, reset • Enable encryption 3 Log Data Error 3 Log encryption key has not been enabled (NVRAM malfunction). Occurs at power on. • Format the HDD with SP5832 • Disable log data encryption 4 Log Data Error 4 Occurs at power on. Log data has been encrypted but encryption has been disabled (NVRAM malfunction). -or- Log data has not been encrypted but encryption is enabled (NVRAM malfunction). • Format the HDD with SP5832 5 Log Data Error 5 Occurs at power on. NVRAM has been replaced with the NVRAM from another machine. -or- HDD has been replaced with an HDD unit from another machine. • Replace the NVRAM with the original NVRAM • Replace the HDD with original the HDD • Format the HDD with SP5832 99 Log Data Error 99 Other errors. Occurs at power on or during machine operation. • Contact the machine design section |
| Error code: | 877 |
| Description: | HDD Data Erase Error The Data Overwrite Security option cannot scramble and erase data on the HDD because the DOS SD card has been corrupted or has |
| Causes: | • If the DOS SD card has been removed, switch the machine off, install the SD card, then switch on the machine. (If this does not been removed from the SD card slot. |
| Remedy: | • If the DOS SD card has been removed, switch the machine off, install the SD card, then switch on the machine. (If this does not solve the problem, the SD card has been damaged.) • Install a new NVRAM • Install a new Data Overwrite Security option with a new SD card |
| Error code: | 878 |
| Description: | TPM electronic recognition error |
| Causes: | -00 The system firmware is not authenticated by TPM. The system hash value registered in the TPM at the machine`s system startup does not match that registered in the USB flash drive. • The system module was updated without going through the formal update process. • Incorrect operating of the USB flash. Replace the board. -01 D USB Flash error An error has occurred in the file system in the USB flash drive. The file system of the USB flash drive is damaged. Replace the controller board. -02 D TPM error An error has occurred in the TPM or TPM driver. Defective TPM Replace the controller board. -03 D TCSD error An error has occurred in the TPM software stack. • The TPM software stack cannot be launched. • The file required for the TPM software stack is missing. Replace the controller board. |
| Error code: | 880 |
| Description: | File Format Converter (MLB) error A request to access the MLB was not answered within the specified time (60 sec.). |
| Causes: | • File format converter board defective |
| Error code: | 881 |
| Description: | Management area error Defective software has been detected. |
| Causes: | Abnormal accumulation of authentication information in the software |
| Remedy: | Turn the main switch off and on. |
| Error code: | 889 |
| Description: | Software performance error If the processing program shows abnormal performance and the program is abnormally ended, this SC is issued. |
| Causes: | • Controller board defective • Software defective |
| Error code: | 900 |
| Description: | RIP Software |
| Remedy: | 1 Printer POR Turn the printer off and on several times. If Error Code 900 continues to display, go to step 2. 2 System board Turn the machine off and on several times, waiting a few minutes between power on and power off. If Error Code 900 continues to display, go to step 3. 3 Factory defaults Restore factory defaults. See “EP Defaults”. This resets the non-critical areas of the user NVRAM. If Error Code 900 continues to display, go to step 4. 4 Sub error codes With Error Code 900 displayed, press and 2. Record the complete list of Sub Error Codes on the display, then call your next level of support or call Toshba. |
| Error code: | 901 |
| Display: | Power OFF/ON 901:Error |
| Description: | Engine flash error |
| Causes: | Indicates that the flash which the system board code is programmed into is bad. Replace the system board. |
| Remedy: | Replace the system board. |
| Error code: | 910 |
| Display: | SYSTEM HALT (*) 910 : DEVICE CONST |
| Description: | Tray 2 Lift Motor Failure Code 910: The Tray 2 Lift Motor is not rotating. |
| Causes: | • Tray 2 Lift Motor, PL4.1.23 • Motor Driver Board, PL2.1.10 • LVPS, PL3.1.1 |
| Remedy: | 1 Test the Lift Motor. 1. Close the Interlock Switches for test. 2. Run the Service Diagnostics Tray 2 Lift Motor test. Does the motor operate? Complete. Replace the motor. If the error persists, go to Step 2. 2 Check for +24 V to the Lift Motor. Is there +24 V across GDDC-1 <=> ground? Go to Step 5. Go to Step 3. 3 Check Motor Driver Board POW24 connector for 24 V. 1. Disconnect POW24. Is there +24 V across POW24 pins 1 and 2? Replace the Motor Driver Board. Go to Step 4. 4 Check for 24 V at the LVPS 1. Disconnect CN2 on the LVPS. Is there +24 V across pins 1 and 2? Replace the POW24 Harness. Replace the LVPS. 5 Check all pins of the DRV1 harness for continuity. Disconnect the DRV1 ribbon cable. Is the cable conductive? Replace the Engine Control Board. Replace the DRV1 Harness. |
| Error code: | 911 |
| Display: | ERROR 911 ENVIRONMENT TEMP(HI) |
| Description: | DC pick motor excessive PWM |
| Remedy: | • Check system board • Check autocompensator motor |
| Error code: | 912 |
| Description: | DC pick motor underspeed error |
| Remedy: | • Check system board • Check autocompensator |
| Error code: | 913 |
| Description: | DC pick motor overspeed error |
| Remedy: | • Check system board • Check autocompensator |
| Error code: | 914 |
| Description: | DC pick motor no encoder feedback |
| Remedy: | Check autocompensator assembly |
| Error code: | 915 |
| Display: | Power OFF/ON 915:Error |
| Description: | Egret Controller error 6 |
| Remedy: | 1. Replace the Egret controller board. |
| Error code: | 919 |
| Display: | Power Off/on 919: Error |
| Description: | Power Supply Fan Error |
| Causes: | • Controller RW3600 power outtage • Controller RW3600 rebooted • Connection to Controller RW3600 loose |
| Remedy: | 1 Is CN17 on the printer controller board properly connected? Go to step 2. Connect CN17. 2 Is CN6 on the CK2 daughter board properly connected? Go to step 3. Connect CN6. 3 Is +24 V present between pins 1 and 3 of connector CN6 on the CK2 daughter board? Replace the power supply fan. Replace the printer controller board. 4 Did either exchange solve the problem? Problem solved. Replace the CK2 daughter board. |
| Error code: | 920 |
| Display: | Power Off/on 920: Error |
| Description: | Fuser Error |
| Causes: | • Software defective • Turn the machine power off/on, or change the controller firmware • Insufficient memory |
| Remedy: | Indicates that the fuser is below temperature when printing. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 921 |
| Display: | Power Off/on 921: Error |
| Description: | Fuser Error |
| Causes: | • The font is not on the SD card |
| Remedy: | Indicates that the fuser is below standby temperature when the printer is idle. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 925 |
| Display: | Power Off/on 925: Error |
| Description: | Fuser Error |
| Causes: | Defective HDD. Hard disk data inconsistencies due to power interruption during writing to the hard disk. Defective software. |
| Remedy: | Wrong fuser lamp installed. 1 Fuser lamp (incorrect lamp/ 925 Service Error) Install the correct voltage and wattage lamp or fuser assembly. See “Fuser assembly removal”. If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer. 2 Fuser lamp fuser top cover assembly Observe the lamp through the left side frame. If the lamp does not come on, do the following: • Remove the redrive assembly. • Remove the fuser assembly, disconnect the LVPS to fuser AC cable from the fuser assembly, and remove the fuser. See “Fuser assembly removal” • Verify that the lamp is installed correctly. If correct, check the continuity of the fuser top cover assembly by verifying the lamp contacts on the right contact assembly. If incorrect, check continuity of the fuser lamp. If incorrect, replace the lamp. If correct, replace the fuser top cover assembly. 3 LVPS LVPS to fuser AC cable CAUTION: When taking measurements for AC power, observe all safety precautions. Measure the AC line voltage between the two connectors on the fuser end of the LVPS to fuser AC cable. If the voltage is incorrect, turn the power off, and remove the LVPS. Measure the AC line voltage between pins CN1-1 and CN1-3 on the board. If correct, check the continuity of the LVPS to fuser AC cable. If incorrect, replace the cable. If the AC line voltage at CN1 is incorrect, check fuse F2. If the fuse is blown, replace the fuse. If the fuse is not blown, replace the LVPS assembly. |
| Error code: | 953 |
| Description: | NVRAM Chip Failure |
| Causes: | • Firmware bug • Update the scanner firmware • IPU defective |
| Remedy: | Indicates the NVRAM chip on the interconnect board has failed. Replace the interconnect board. |
| Error code: | 954 |
| Description: | NVRAM CRC Failure |
| Causes: | • Firmware bug • IPU defective |
| Remedy: | Indicates the NVRAM experienced a CRC failure. Replace the interconnect board. |
| Error code: | 955 |
| Description: | Code CRC <loc> |
| Causes: | • Firmware bug • Hard disk unit defective • Controller defective • MCU defective • IPU defective |
| Remedy: | Replace the system board. Where <loc> = CRC Failure or ECC Failure on the system board. |
| Error code: | 964 |
| Description: | Emulation Error |
| Causes: | • Software defective |
| Remedy: | Indicates a failure within the Download Emulation which is programmed into the code overlay card. The specific error is as follows: 964 - Download Emulation CRC Failure. Checksum Failure. |
| Error code: | 965 |
| Description: | Print Start Error During print processing, another command to start printing was received. |
| Causes: | • Printer firmware defective • Update printer firmware |
| Error code: | 984 |
| Display: | Service call 984: Error. |
| Description: | <device> |
| Causes: | • Controller (SIMAC) board defective • BICU defective • BICU/controller disconnected |
| Remedy: | Invalid command parameter received by the specified device. Note: Service errors 980 thru 984 <device> can be one of the following: system board, duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
| Error code: | 985 |
| Display: | Service call 985: Error |
| Description: | Transfer Belt Thermistor Error |
| Causes: | • Controller (SIMAC) board defective • BICU defective • BICU/controller disconnected |
| Remedy: | 1 Are connectors CN407 and CN411 on the sensor board connected properly? Go to step 2. Plug the connector in securely. 2 Is connector CN15 on the printer controller board connected properly? Replace the transfer belt unit. If the problem remains, replace the printer controller board. Plug the connector in securely. |
| Error code: | 986 |
| Display: | Service call 986: Error |
| Description: | Transparency (OHP) Sensor Error |
| Causes: | • Controller (SIMAC) board defective • BICU defective • BICU Controller disconnected |
| Remedy: | 1 Are connectors CN4 (light emitting) and CN5 (light receiving) on the CK1 daughter board connected properly? Go to step 2. Plug the connector in securely. 2 Test the sensor. While actuating the sensor, does the voltage fluctuate between 0 V and +5 between pins 2 and 3 of connector CN7 of the printer controller board? Replace the printer controller board. Replace the MPF unit. |
| Error code: | 990 |
| Display: | Inspection is required. 990 : Error |
| Description: | <device> |
| Causes: | • Firmware defective: re-boot • Update firmware |
| Remedy: | Indicates an equipment check condition has occurred in the specified device, but the device is unable to identify the exact component failure. Note: <device> can be one of the following: duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
| Error code: | 991 |
| Description: | <device> Card |
| Causes: | Software defective, re-boot |
| Remedy: | The specified device has detected an equipment check in its system card. Note: <device> can be one of the following: duplex, tray x (1, 2, 3, 4, or 5), envelope feeder or output bin. |
| Error code: | 992 |
| Description: | Temperature/Humidity Sensor Error |
| Causes: | • Turn the main power switch off/on. • Go into the SP mode. Do SP7901 to display details about SC992 (software file name, line number, and variable), and inform your supervisor of the results. |
| Remedy: | 1 Is connector CN18 on the CK1 daughter card board connected properly? Go to step 2. Plug the connector in securely. 2 Replace the temperature and humidity sensor (a component of the paper feed gear). Did this fix the problem? Problem solved. Replace the printer controller board. |
| Error code: | 994 |
| Display: | Service Call 994:Error |
| Description: | Density Sensor Error |
| Causes: | • No action required because this SC does not interfere with operation of the machine. |
| Remedy: | 1 Is the front door fully closed? Go to step 2. Close the front door. 2 Is the density sensor actuator stuck in place? Release the density sensor actuator. Go to step 3. 3 Are connectors CN406 and CN407 on the sensor board connected properly? Go to step 4. Plug the connector in securely. 4 Is connector CN15 on the printer controller board connected properly? Replace the density sensor. Go to step 5. Plug the connector in securely. 5 Did replacing the density sensor fix the problem? Problem solved. Replace the printer controller board. |
| Error code: | 995 |
| Description: | Finisher Main Feed Motor abnormal |
| Causes: | -01 D • Defective BCU • NVRAM Replacement error • Install the previous NVRAM • Input the serial number with SP5-811-004, and turn the main power switch off and on. -02 D • Defective NVRAM • Defective controller Perform SP5-825 to download the appropriate data to the NVRAM, and then turn the main power switch off and then back on. -03 D The serial number cannot be identified due to a mistake during controller replacement or mechanical failure. Replace the controller with the correct type. -04 D - Place all parts in the initial state, and then replace the parts according to the procedures described in the manuals. |
| Remedy: | 1 Is there jammed paper or other obstructions in the paper path? Clear the paper path. Go to step 2. 2 Check to ensure the connector PJ6 on the finisher control board and the feed motor assembly cable are properly connected. Are the cables properly connected? Go to step 3. Properly connect the cables. 3 Make sure the finisher set switch is activated. Measure for +24 V dc (–10%) between pins 7 and 8 and +5 V dc (–10%) between pins 7 and 6 on the feed motor assembly cable connector CN1. Is either voltage missing? Go to step 4. Go to step 5. 4 Disconnect the feed motor assembly cable and PJ6 on the finisher control board. Measure continuity on the cable for all positions. Is there continuity? Go to step 6. Replace the cable. 5 Replace the feed motor assembly. Did this resolve the problem? Problem solved. Replace the finisher control board. 6 Measure for +24 V dc between pins 1 and 2 on connector PJ3 on the finisher control board. Measure for +5 V dc between pins 1 and 3 on PJ2 on the finisher control board. Is either voltage missing? Replace the power supply. Replace the finisher control board. |
| Error code: | 997 |
| Description: | Finisher Tractor Motor Error |
| Causes: | • Software bug • A RAM or DIMM option required for the application is not installed or not installed correctly. |
| Remedy: | 1 Are there obstructions or foreign objects in the accumulator or face down paper path? Remove the objects or obstructions. Go to step 2. 2 Are the connectors CN3 at the tractor motor and PJ4 on the finisher control board securely connected? Go to step 3. Securely connect the connectors. 3 Make sure the finisher set switch is activated. Measure +24 V dc between pin 1 of tractor motor connector CN3 and frame ground. Is +24 V dc (–10%)? Go to step 4. Go to step 5. 4 Replace the tractor motor assembly. Did this resolve the problem? Problem solved. Replace the finisher control board. 5 Disconnect CN3 and PJ4 on the finisher control board and perform a continuity check on all positions. Is there continuity on all positions? Go to step 6. Replace the cable. 6 Check for +24 V dc between pins 1 and 2 of PJ3 on the finisher control board. Is +24 V dc present? Replace the finisher control board. Replace the power supply. |
| Error code: | 998 |
| Description: | Tray Elevator Motor Error |
| Causes: | • Software bug • A RAM or DIMM option needed for the application not installed, or not installed correctly • Controller board defective |
| Remedy: | 1 Are the connectors CN4 at the tray elevator motor and connector PJ4 on the finisher control board properly connected? Go to step 2. Properly connect the connectors. 2 Make sure that the finisher set switch is activated. Power the printer off. Measure for approximately +24 V dc (–10%) between pins 1 and 2 of connector CN4 at the tray elevator motor. Power the printer on and observe the voltage meter during the first 12 seconds of power up. Is +24 V dc present while the printer is powering up? Replace the tray elevator motor. Go to step 3. 3 Disconnect CN4 at the tray elevator motor. Disconnect PJ4 on the finisher control board. Measure for continuity between CN4 pin 1 and PJ4 pin 7. Measure for continuity between CN4 pin 2 and PJ4 pin 8. Is there continuity in both locations? Go to step 4. Replace the cable. 4 Measure for +24 V dc (–10%) between pins 1 and 2 on connector PJ6. Is +24 V dc present? Replace the finisher control board. Replace the finisher power supply. |
