Kyocera TASKalfa 221
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Макс. формат |
A3 |
Цветность печати |
|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Размещение |
настольный |
Телефон |
|
Факс |
|
Печать фотографий |
|
Сканер |
|
Копир |
|
Тип устройства |
МФУ |
Принтер |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Время разогрева |
17,2 |
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 600 |
Скорость ч/б печати |
|
| A3 | 10 |
Скорость цветной печати |
|
| A4 | 22 |
Копир |
|
Макс, количество копий за цикл |
999 |
Время выхода первой копии |
5,7 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Сканер |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Расходные материалы |
|
Количество картриджей |
1 |
Печать на: |
|
| Этикетках |
|
| Карточках |
|
| Пленках |
|
| Глянцевой бумаге |
|
| Конвертах |
|
| Матовой бумаге |
|
| Фотобумаге |
|
| CD/DVD |
|
| Рулоне |
|
Плотность бумаги |
|
| Максимальная | 160 |
| Минимальная | 45 |
Факс |
|
Цветной |
|
Телефон |
|
Автоответчик |
|
Проводная трубка |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Стандарт DECT |
|
Спикерфон |
|
Шрифты и языки управления |
|
Языки управления |
|
| PCL 6 |
|
| PostScript |
|
|
|
|
| PostScript 3 |
|
| PostScript 2 |
|
| PPDS |
|
| PCL 5c |
|
Количество установленных шрифтов |
|
| PostScript | 136 |
| PCL | 80 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 700 |
| Максимальная | 1 300 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Брошюровщик |
|
Сортер |
|
Степлер |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
USB |
|
Bluetooth |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Wi-Fi |
|
Инфракрасный порт |
|
LPT |
|
Количество слотов расширения |
1 |
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
128 |
Макс, объем памяти |
1 152 |
Процессор |
PowerPC 440 |
Частота процессора |
500 |
Дополнительная информация |
|
Экран |
|
Поддержка ОС |
|
| Mac OS |
|
| Linux |
|
| Windows |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 450 |
| В режиме ожидания | 6,2 |
Уровень шума |
|
| При работе | 66,7 |
| В режиме ожидания | 40 |
Габариты |
|
Высота |
607 |
Ширина |
568 |
Вес |
40 |
Глубина |
594 |
Модули
Electrical Components 3
(Комплекты)
Paper Feed Section 4 (22ppm)
Fuser Section
Scanner Section 1
DRIVE SECTION 2
SCANNER SECTION 2
DEVELOPING SECTION
Paper Feed Section 3 (22ppm)
COVERS
(Узел термозакрепления)
ELECTRICAL COMPONENTS 2
CASSETTE ASSEMBLY
PAPER FEED
(Электронные компоненты)
PAPER FEED SECTION 2
Image Formation Section
(Узел переноса)
FRAMES 1
FRAMES 2
Exit Section
Drive Section 1
Operation Section
Paper Cassette 2 (22ppm)
Laser Scanner Section
(Внутренние компоненты)
Paper Feed Section 1
Electrical Components 1
Paper Cassette 1
Детали Scanner Section 1
| Деталь: | TERMINAL TRANSFER A |
| Парткод: | 302KK39040 |
| Деталь: | TERMINAL SEPARATION A |
| Парткод: | 302KK39050 |
| Деталь: | TERMINAL DLP A |
| Парткод: | 302KK39060 |
| Деталь: | TERMINAL MAIN A |
| Парткод: | 302KK39070 |
| Деталь: | TERMINAL MAIN B |
| Парткод: | 302KK39080 |
| Деталь: | BASE TERMINAL |
| Парткод: | 302KK39090 |
| Деталь: | TERMINAL TRANSFER B |
| Парткод: | 302KK39100 |
| Деталь: | TERMINAL C |
| Парткод: | 302KK39110 |
| Деталь: | TERMINAL SEPARATION B |
| Парткод: | 302KK39120 |
| Деталь: | TERMINAL DLP B |
| Парткод: | 302KK39130 |
| Деталь: | SHEET TERMINAL |
| Парткод: | 302KK39140 |
| Деталь: | GUIDE WIRE MAIN |
| Парткод: | 302KK39550 |
| Деталь: | GUIDE WIRE BASE |
| Парткод: | 302KK39560 |
| Деталь: | GUIDE WIRE FUSER |
| Парткод: | 302KK39570 |
| Деталь: | GUIDE WIRE MP |
| Парткод: | 302KK39580 |
| Деталь: | PLATE SHIELD DP |
| Парткод: | 302KK39600 |
| Деталь: | PLATE SHIELD ISU |
| Парткод: | 302KK39610 |
| Деталь: | PLATE SHIELD CCD |
| Парткод: | 302KK39620 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610010++H01 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610013++H01 |
| Деталь: | LID NETWORK |
| Парткод: | 2DA26540 |
| Деталь: | PLATE OPTION |
| Парткод: | 2DD26070 |
| Деталь: | SHIELD MAIN MFP |
| Парткод: | 302KH39510 |
| Деталь: | COVER SHIELD |
| Парткод: | 302KH39520 |
| Деталь: | LID CF |
| Парткод: | 302KH39530 |
| Деталь: | LID KUIO |
| Парткод: | 302KH39540 |
| Деталь: | GROUND PLATE SHIELD |
| Парткод: | 302KH39550 |
| Деталь: | GROUND SPRING SHIELD |
| Парткод: | 302KH39560 |
| Деталь: | SCREW OP / M3 X 8 CRFREE A4 |
| Парткод: | 5MMT263SN012++R |
| Деталь: | GUID CF CARD /45252C0006 A4 |
| Парткод: | 5MVX621SH003 |
| Деталь: | PARTS PWB MAIN ASSY SP |
| Парткод: | 302KH94010 |
| Деталь: | PARTS PWB MAIN ASSY SP EU |
| Парткод: | 302KH94230 |
| Деталь: | PARTS PWB ENGINE ASSY SP (18ppm) |
| Парткод: | 302KJ94010 |
| Деталь: | PARTS PWB ENGINE ASSY SP (22ppm) |
| Парткод: | 302KH94020 |
| Цена: | 17 500 ₽ |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | Вал (левый) в узле регистрации |
| Парткод: | 302KK94231 |
| Цена: | 6 400 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-460 |
| Цена: | 13 900 ₽ |
| Деталь: | Узел переноса заряда в драм-картридже, в сборе |
| Парткод: | MC-460 |
| Цена: | 6 100 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-460 |
| Цена: | 15 800 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-460 |
| Цена: | 19 100 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Guide-Claw |
| Парткод: | 302LH25610 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-460 |
| Цена: | 14 000 ₽ |
| Деталь: | REAR COVER |
| Парткод: | 303MH04020 |
| Деталь: | PIN COVER |
| Парткод: | 303MH04040 |
| Деталь: | COVER CONNECTOR |
| Парткод: | 303MH04050 |
| Деталь: | PULLEY,SEPARATION |
| Парткод: | 2AR07230 |
| Цена: | 360 ₽ |
| Деталь: | PULLEY FEED |
| Парткод: | 2BL16080 |
| Деталь: | HOLDER RETARD |
| Парткод: | 2C907250 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | SPRING REGIST |
| Парткод: | 2C907310 |
| Деталь: | SPRING RETARD |
| Парткод: | 2C907320 |
| Деталь: | SHAFT FEED PULLEY |
| Парткод: | 302BL06212 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 302C907171 |
| Цена: | 230 ₽ |
| Деталь: | TORQUE LIMITER 340 |
| Парткод: | 302KK06050 |
| Деталь: | SHAFT RETARD |
| Парткод: | 302KK06080 |
| Цена: | 200 ₽ |
| Деталь: | COVER PAPER FEED |
| Парткод: | 303HW04011 |
| Деталь: | SHEET FEED |
| Парткод: | 303HW06080 |
| Деталь: | UPPER REAR COVER |
| Парткод: | 303MH02030 |
| Деталь: | JUNCTION PLATE |
| Парткод: | 303MH02080 |
| Деталь: | LEFT RAIL CASSETTE |
| Парткод: | 303MH02090 |
| Деталь: | Connecting Plate |
| Парткод: | 303MH02100 |
| Деталь: | GROUND PLATE HEATER |
| Парткод: | 303MH02110 |
| Деталь: | Left front cover |
| Парткод: | 303MH04010 |
| Деталь: | COUPLER,RELEASE |
| Парткод: | 3A504020 |
| Деталь: | GROUND PLATE PF |
| Парткод: | 3HW02110 |
| Деталь: | GROUND PLATE PF2 |
| Парткод: | 3HW02120 |
| Деталь: | HOOK COVER |
| Парткод: | 3HW02150 |
| Деталь: | GUIDE CONVEYING |
| Парткод: | 3HW06040 |
| Деталь: | SPRING FEED |
| Парткод: | 3HW06060 |
| Деталь: | GUIDE SHEET PAPER FEED |
| Парткод: | 3HW06070 |
| Деталь: | LABEL COVER |
| Парткод: | 302KK04280 |
| Деталь: | PARTS HEATER DEHUMIDIFIER 120 SP |
| Парткод: | 302KK94430 |
| Деталь: | PARTS HEATER DEHUMIDIFIER 230 SP |
| Парткод: | 302KK94440 |
| Деталь: | MOUNT HEATER |
| Парткод: | 303MH02060 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210003++H01 |
| Деталь: | ACCESS.BAND |
| Парткод: | 7YZM410002++H01 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PLATE JOINT |
| Парткод: | 303MH02170 |
| Деталь: | +TP-FLAT T.T P SCREW 3X8(BLACK) |
| Парткод: | 7BB282308H |
| Деталь: | +TP-FLAT T.T P SCREW 3X8 |
| Парткод: | 7BB202308H |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR(BLACK) |
| Парткод: | 7BB782308H |
| Деталь: | +BIND T.T S SCREW 3X12 SR |
| Парткод: | 7BB700312H |
| Деталь: | PARTS DEH ASSY 120 SP (Option) |
| Парткод: | 303MH94050 |
| Деталь: | PARTS DEH ASSY 240 SP (Option) |
| Парткод: | 303MH94060 |
| Деталь: | REAR BUSH HEAT ROLLER |
| Парткод: | 2C920160 |
| Деталь: | GEAR FUSER Z28 |
| Парткод: | 2C920180 |
| Деталь: | SPRING PRESSURE |
| Парткод: | 2FT20030 |
| Деталь: | FRONT BUSH HEAT ROLLER |
| Парткод: | 302C920152 |
| Деталь: | Separator Assy |
| Парткод: | 302FT20120 |
| Деталь: | THERMISTOR FUSER |
| Парткод: | 302GJ25560 |
| Деталь: | SPRING FUSER |
| Парткод: | 302H025290 |
| Деталь: | GEAR Z38 HEAT ROLLER |
| Парткод: | 302KK25170 |
| Цена: | 650 ₽ |
| Деталь: | WIRE FUSER PRIMARY |
| Парткод: | 302KK46180 |
| Деталь: | PARTS ROLLER HEAT SP |
| Парткод: | 302KK94240 |
| Цена: | 5 600 ₽ |
| Деталь: | PARTS HEATER FUSER 120 SP |
| Парткод: | 302KK94260 |
| Деталь: | PARTS HEATER FUSER 230 SP |
| Парткод: | 302KK94270 |
| Деталь: | PARTS THERMOSTAT 202 FUSER SP |
| Парткод: | 302KK94280 |
| Деталь: | PARTS ROLLER PRESS SP |
| Парткод: | 302KK94290 |
| Цена: | 6 000 ₽ |
| Деталь: | BUSH PRESS /A-03 A4 |
| Парткод: | 5MVM188XN014 |
| Деталь: | ADJUSTOR FUSER |
| Парткод: | 302KK25130 |
| Деталь: | +BIND T.T P SCREW 3X12 |
| Парткод: | 7BB200312H |
| Деталь: | +BIND T.T P SCREW 4X10 |
| Парткод: | 7BB200410H |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +BIND T.T S SCREW 3X12 SR |
| Парткод: | 7BB700312H |
| Деталь: | FK-460(A) |
| Парткод: | 302KK93040 |
| Деталь: | FK-460(E) |
| Парткод: | 302KK93050 |
| Деталь: | PLATE SHIELD ISU R |
| Парткод: | 302KK39650 |
| Деталь: | SENSOR ORIGINAL |
| Парткод: | 2C927090 |
| Деталь: | FFC INVERTER |
| Парткод: | 302KH46100 |
| Деталь: | WIRE DP |
| Парткод: | 302KH46140 |
| Деталь: | PARTS LAMP INVERTER SP |
| Парткод: | 302KK94410 |
| Деталь: | FFC CCD |
| Парткод: | 302KK46190 |
| Деталь: | PT.SENSOR GP1A73AJ00/ BK |
| Парткод: | 5FNXGP1A73A++02 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210005++H01 |
| Деталь: | EDGING,EDS-0607L(KITAGAWA) |
| Парткод: | M2104390 |
| Деталь: | PIN ISU |
| Парткод: | 302KK02320 |
| Деталь: | SPRING ISU LOW |
| Парткод: | 302KK02390 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | SPRING,MIRROR HOLDER |
| Парткод: | 2BC12190 |
| Деталь: | LABEL GLASS CAUTION |
| Парткод: | 2C905160 |
| Деталь: | REFLECTOR SCANNER |
| Парткод: | 2C912110 |
| Деталь: | RETAINER WIRE |
| Парткод: | 2C912150 |
| Деталь: | GUIDE FFC B |
| Парткод: | 2C912160 |
| Деталь: | BELT SCANNER |
| Парткод: | 2C912260 |
| Деталь: | GEAR Z18/39 |
| Парткод: | 2C912310 |
| Деталь: | Gear Z36 |
| Парткод: | 2C912320 |
| Деталь: | WIRE SCANNER BLACK |
| Парткод: | 2C912350 |
| Деталь: | WIRE SCANNER GRAY |
| Парткод: | 2C912360 |
| Деталь: | PULLEY SCANNER |
| Парткод: | 2C912680 |
| Деталь: | SLIDER SCANNER |
| Парткод: | 2DC12230 |
| Деталь: | ADJUSTING PLATE B |
| Парткод: | 302C912131 |
| Деталь: | MOTOR PLATE SCANNER |
| Парткод: | 302C912302 |
| Деталь: | SHAFT MOTOR DRIVE |
| Парткод: | 302C912331 |
| Деталь: | PIN SCANNER RETAINING |
| Парткод: | 302GR17180 |
| Деталь: | PULLEY LEFT FRAME |
| Парткод: | 302H017120 |
| Деталь: | PULLEY SCANNER |
| Парткод: | 302H017180 |
| Деталь: | BUSH 8 EW |
| Парткод: | 302H024360 |
| Цена: | 30 ₽ |
| Деталь: | MOTOR SCANNER |
| Парткод: | 302H717140 |
| Цена: | 7 300 ₽ |
| Деталь: | DRUM PULLEY |
| Парткод: | 302H717250 |
| Деталь: | PARTS LAMP SCANNER SP |
| Парткод: | 302KK94220 |
| Деталь: | MIRROR A |
| Парткод: | 302KK17320 |
| Деталь: | MIRROR B |
| Парткод: | 302KK17330 |
| Деталь: | GROUND COVER ISU |
| Парткод: | 302KK17430 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PARTS ISU |
| Парткод: | 302KK93070 |
| Деталь: | SEAL SCANNER |
| Парткод: | 302DA12070 |
| Деталь: | WIRE SCANNER MOTOR |
| Парткод: | 302KK46230 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +BIND T.T S SCREW 3X6 |
| Парткод: | 7BB100306H1 |
| Деталь: | +PAN M SCREW WITH SW W 3X8 R |
| Парткод: | 7BB606308H |
| Деталь: | PLATE SHIELD DRIVE |
| Парткод: | 302KK39630 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | WIRE CONTAINER |
| Парткод: | 302KH46170 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610010++H01 |
| Деталь: | GEAR 60 |
| Парткод: | 2C922080 |
| Деталь: | COUPLING CONT P |
| Парткод: | 2C922170 |
| Деталь: | GEAR 29 FIX JOINT |
| Парткод: | 2C922230 |
| Деталь: | SPRING CONT P |
| Парткод: | 2C922260 |
| Деталь: | SPRING DRUM COUPLING |
| Парткод: | 2FT22100 |
| Деталь: | BEARING 6-15-17 |
| Парткод: | 2FT22160 |
| Деталь: | SPACER COUPLING |
| Парткод: | 302FT22200 |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | POSITIONING BUSH DRUM |
| Парткод: | 302H031320 |
| Цена: | 70 ₽ |
| Деталь: | TORQUE LIMITER 340 |
| Парткод: | 302KK06050 |
| Деталь: | PLATE MAIN DRIVE A |
| Парткод: | 302KK31010 |
| Деталь: | PLATE MAIN DRIVE B |
| Парткод: | 302KK31020 |
| Деталь: | PLATE MAIN DRIVE C |
| Парткод: | 302KK31050 |
| Деталь: | SHAFT COUPLING |
| Парткод: | 302KK31060 |
| Деталь: | SHAFT CONT DRIVE A |
| Парткод: | 302KK31070 |
| Деталь: | SHAFT CONT DRIVE B |
| Парткод: | 302KK31080 |
| Деталь: | GEAR DRUM Z137R |
| Парткод: | 302KK31110 |
| Деталь: | GEAR DLP Z26L |
| Парткод: | 302KK31140 |
| Деталь: | GEAR MAIN Z37L-Z31 |
| Парткод: | 302KK31160 |
| Деталь: | GEAR MAIN Z46-Z23 |
| Парткод: | 302KK31170 |
| Деталь: | GEAR MAIN Z40-Z24 |
| Парткод: | 302KK31180 |
| Деталь: | GEAR MAIN Z36-Z24 |
| Парткод: | 302KK31190 |
| Деталь: | GEAR MAIN Z29 |
| Парткод: | 302KK31200 |
| Деталь: | GEAR MAIN Z29-Z24 |
| Парткод: | 302KK31210 |
| Деталь: | GEAR MAIN Z23 |
| Парткод: | 302KK31220 |
| Деталь: | GEAR FUSER Z47-Z27 |
| Парткод: | 302KK31230 |
| Деталь: | GEAR FUSER Z61-Z35 |
| Парткод: | 302KK31240 |
| Деталь: | GEAR FUSER Z64-Z36 |
| Парткод: | 302KK31250 |
| Деталь: | GEAR FUSER Z58 |
| Парткод: | 302KK31260 |
| Деталь: | MOUNT PI |
| Парткод: | 302KK31370 |
| Деталь: | GEAR CONT Z43 |
| Парткод: | 302KK31460 |
| Деталь: | GEAR CONT Z25 |
| Парткод: | 302KK31470 |
| Деталь: | GEAR CONT Z49 |
| Парткод: | 302KK31480 |
| Деталь: | GEAR CONT Z24 |
| Парткод: | 302KK31490 |
| Деталь: | GEAR CONT Z39-Z24 |
| Парткод: | 302KK31500 |
| Деталь: | COUPLING DRUM |
| Парткод: | 302KK31520 |
| Деталь: | PLATE MOTOR |
| Парткод: | 302KK31530 |
| Деталь: | SPRING FUSER |
| Парткод: | 302KK31540 |
| Деталь: | SPRING CONT S |
| Парткод: | 302KK31550 |
| Деталь: | GUIDE DRIVE WIRE |
| Парткод: | 302KK31560 |
| Деталь: | GEAR DLP Z57R |
| Парткод: | 302KK31590 |
| Деталь: | SHAFT DLP DRIVE |
| Парткод: | 302KK31600 |
| Деталь: | GEAR MAIN Z53R |
| Парткод: | 302KK31610 |
| Деталь: | GEAR CONT Z30 A |
| Парткод: | 302KK31620 |
| Деталь: | GEAR CONT Z51 |
| Парткод: | 302KK31630 |
| Деталь: | GEAR DLP Z80R-Z51L |
| Парткод: | 302KK31670 |
| Деталь: | GEAR DLP Z68R |
| Парткод: | 302KK31680 |
| Деталь: | GEAR DLP Z37L |
| Парткод: | 302KK31690 |
| Деталь: | GEAR CONT Z30 |
| Парткод: | 302KK31740 |
| Деталь: | PARTS CLUTCH REGIST 30 SP |
| Парткод: | 302KK94320 |
| Деталь: | PARTS CLUTCH FEED 30 SP |
| Парткод: | 302KK94330 |
| Деталь: | PARTS MOTOR BL W25 SP |
| Парткод: | 302KK94540 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | BEARING 6900ZZNR |
| Парткод: | G3169000 |
| Деталь: | +BIND M SCREW 3X3 |
| Парткод: | 7BB000303H |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | SPRING PIN / M2 X 10 S-BLK |
| Парткод: | 5MBP2010WXSP |
| Деталь: | LABEL CONVEYING |
| Парткод: | 302KK34070 |
| Деталь: | COVER ISU FRONT |
| Парткод: | 302KK04150 |
| Деталь: | COVER ISU LEFT |
| Парткод: | 302KK04160 |
| Деталь: | COVER ISU RIGHT |
| Парткод: | 302KK04170 |
| Деталь: | COVER ISU REAR |
| Парткод: | 302KK04180 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | EDGING,EDS-0607L(KITAGAWA) |
| Парткод: | M2104390 |
| Деталь: | CUSHION,CONTACT GLASS |
| Парткод: | 29812291 |
| Деталь: | CONTACT GLASS ADF |
| Парткод: | 2C912280 |
| Деталь: | HOLDER GLASS DF |
| Парткод: | 2C912420 |
| Деталь: | GUIDE RELEASE SWITCH |
| Парткод: | 2C912620 |
| Деталь: | SHAFT RELEASE SWITCH |
| Парткод: | 2C912640 |
| Цена: | 80 ₽ |
| Деталь: | SPRING RELEASE SWITCH |
| Парткод: | 2C912650 |
| Деталь: | SHIELD SCANNER FRAME |
| Парткод: | 2C912670 |
| Деталь: | SPONGE ORIGINAL SIZE |
| Парткод: | 2C912700 |
| Деталь: | SHIELD SCANNER FRAME B |
| Парткод: | 2C912710 |
| Деталь: | SHIELD BASE |
| Парткод: | 2C912720 |
| Деталь: | STANDARD PLATE SHADING |
| Парткод: | 2C912190 |
| Деталь: | CONTACT GLASS |
| Парткод: | 2C912250 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +BIND T.T S SCREW 3X6 |
| Парткод: | 7BB100306H1 |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR(BLACK) |
| Парткод: | 7BB782308H |
| Деталь: | +TP-FLAT T.T S SCREW 4X10 SR(BLACK) |
| Парткод: | 7BB782410H |
| Деталь: | PARTS CONTACT GLASS(I) |
| Парткод: | 302KK94500 |
| Деталь: | PARTS CONTACT GLASS( C) |
| Парткод: | 302KK94490 |
| Цена: | 8 400 ₽ |
| Деталь: | BEARING,688ZZNR |
| Парткод: | 28107400 |
| Деталь: | REAR COVER DLP |
| Парткод: | 2C914080 |
| Деталь: | GEAR Z20H |
| Парткод: | 302KK14090 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | DV-460 |
| Парткод: | 302KK93020 |
| Деталь: | GEAR 16,BYPASS |
| Парткод: | 29807100 |
| Деталь: | PULLEY,PAPER FEED |
| Парткод: | 2AR07220 |
| Цена: | 1 600 ₽ |
| Деталь: | PULLEY,LEADING FEED |
| Парткод: | 2AR07240 |
| Деталь: | STOPPER 5,RING |
| Парткод: | 2BC06990 |
| Деталь: | CUT WASHER 4 |
| Парткод: | 2BG22990 |
| Деталь: | PLATE SIZE DETECTION |
| Парткод: | 2C907060 |
| Деталь: | STOPPER CASSETTE |
| Парткод: | 2C907100 |
| Деталь: | SHAFT PICK UP B |
| Парткод: | 2C907230 |
| Деталь: | PLATE PICK UP B |
| Парткод: | 2C907240 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | SPRING PICK UP |
| Парткод: | 2C907340 |
| Деталь: | SPRING LEVER |
| Парткод: | 2C907350 |
| Деталь: | HOLDER PULLEY A |
| Парткод: | 2C907400 |
| Деталь: | PULLEY GUIDE A |
| Парткод: | 2C907410 |
| Деталь: | BUSH PAPER FEED C |
| Парткод: | 2C907430 |
| Цена: | 190 ₽ |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | FOOT |
| Парткод: | 302HN02610 |
| Деталь: | ACTUATOR EMPTY |
| Парткод: | 302KK02240 |
| Деталь: | FILM PE |
| Парткод: | 302KK02370 |
| Деталь: | LEVER PICK UP |
| Парткод: | 302KK06060 |
| Деталь: | Roller feed |
| Парткод: | 303HW06021 |
| Деталь: | PARTS PWB PF MAIN ASSY SP |
| Парткод: | 303MH94010 |
| Деталь: | MOUNT SW |
| Парткод: | 303MH02020 |
| Деталь: | REINFORCEMENT FEED |
| Парткод: | 303MH02070 |
| Деталь: | MOUNT DRIVE |
| Парткод: | 303MH31010 |
| Деталь: | MOUNT MOTOR |
| Парткод: | 303MH31020 |
| Деталь: | SHAFT PAPER FEED |
| Парткод: | 303MH31030 |
| Деталь: | SUPPORT PLATE PWB |
| Парткод: | 303MH39010 |
| Деталь: | PARTS CLUTCH PAPER FEED SP |
| Парткод: | 303MH94020 |
| Деталь: | PARTS MOTOR PAPER FEED SP |
| Парткод: | 303MH94030 |
| Деталь: | WIRE PF LOWER |
| Парткод: | 303MH46010 |
| Деталь: | WIRE PE SW |
| Парткод: | 303MH46030 |
| Деталь: | WIRE SIZE SW |
| Парткод: | 303MH46040 |
| Деталь: | GEAR 20 PF FEED |
| Парткод: | 3HL07250 |
| Деталь: | HEATER BRANCH PCB ASSY |
| Парткод: | 3HW01020 |
| Деталь: | HOLDER FEED SHAFT |
| Парткод: | 3HW06050 |
| Деталь: | GEAR 26/90 |
| Парткод: | 3HW22010 |
| Деталь: | GEAR 25 |
| Парткод: | 3HW22020 |
| Деталь: | PUSH SWITCH 03 SN /SW-192 N |
| Парткод: | 5ESP03090001+01 |
| Деталь: | BUSH FEED /A-49 FEED A4 |
| Парткод: | 5MVM176DN026 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | SW.PUSH |
| Парткод: | 7SP01000001+H01 |
| Деталь: | ACCESS.BAND |
| Парткод: | 7YZM410002++H01 |
| Деталь: | EDGING,EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | WIRE SADDLE,RBWS-1N-V0(KITAGAWA) |
| Парткод: | M21AK070 |
| Деталь: | +TP-FLAT T.T P SCREW 3X8 |
| Парткод: | 7BB202308H |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | SPRING PIN / M2 X 10 S-BLK |
| Парткод: | 5MBP2010WXSP |
| Деталь: | SPRING PIN / M2 X 12 S-BLK |
| Парткод: | 5MBP2012WXSP |
| Деталь: | LABEL LOGO |
| Парткод: | 302KK34010 |
| Деталь: | LABEL EMBLEM MFP 18 (18ppm) |
| Парткод: | 302KK34030 |
| Деталь: | LABEL EMBLEM MFP 22 (22ppm) |
| Парткод: | 302KK34020 |
| Деталь: | LABEL CONT SET |
| Парткод: | 302KK34060 |
| Деталь: | LABEL TONER TANK |
| Парткод: | 302KK34140 |
| Деталь: | COVER MAIN SW |
| Парткод: | 302H004241 |
| Деталь: | LABEL COVER |
| Парткод: | 302KK04280 |
| Деталь: | STOPPER PAPER |
| Парткод: | 302H004560 |
| Деталь: | COVER REAR |
| Парткод: | 302KH04010 |
| Деталь: | COVER FRONT LEFT |
| Парткод: | 302KK04010 |
| Деталь: | COVER FRONT LEFT TOP |
| Парткод: | 302KK04020 |
| Деталь: | COVER FRONT RIGHT |
| Парткод: | 302KK04030 |
| Деталь: | COVER FRONT RIGHT TOP |
| Парткод: | 302KK04040 |
| Деталь: | COVER FRONT TOP |
| Парткод: | 302KK04050 |
| Деталь: | COVER FRONT LOW |
| Парткод: | 302KK04060 |
| Деталь: | COVER TRAY |
| Парткод: | 302KK04070 |
| Деталь: | COVER EXIT REAR |
| Парткод: | 302KK04080 |
| Деталь: | COVER LEFT FRONT |
| Парткод: | 302KK04090 |
| Деталь: | COVER LEFT REAR |
| Парткод: | 302KK04110 |
| Деталь: | COVER LEFT MIDDLE |
| Парткод: | 302KK04120 |
| Деталь: | COVER RIGHT LOW |
| Парткод: | 302KK04130 |
| Деталь: | COVER RIGHT MIDDLE |
| Парткод: | 302KK04140 |
| Деталь: | COVER INNER RIGHT |
| Парткод: | 302KK04220 |
| Деталь: | COVER TRAY RIGHT |
| Парткод: | 302KK04230 |
| Деталь: | HINGE FRONT COVER |
| Парткод: | 302KK04240 |
| Деталь: | COVER EXIT UP |
| Парткод: | 302KK04270 |
| Деталь: | SUPPORT PAPER STOPPER |
| Парткод: | 302KK04290 |
| Деталь: | MOUNT REAR COVER |
| Парткод: | 302KH04020 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +BIND T.T P SCREW 4X10 |
| Парткод: | 7BB200410H |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR(BLACK) |
| Парткод: | 7BB782308H |
| Деталь: | Крышка планшетного сканера |
| Парткод: | 1202H70UN0 |
| Цена: | 4 200 ₽ |
| Деталь: | Вал (левый) в узле регистрации |
| Парткод: | 302KK94231 |
| Цена: | 6 400 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-460 |
| Цена: | 13 900 ₽ |
| Деталь: | Узел переноса заряда в драм-картридже, в сборе |
| Парткод: | MC-460 |
| Цена: | 6 100 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-460 |
| Цена: | 15 800 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-460 |
| Цена: | 19 100 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Guide-Claw |
| Парткод: | 302LH25610 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-460 |
| Цена: | 14 000 ₽ |
| Деталь: | WIRE ENGINE POWER |
| Парткод: | 302KH46010 |
| Деталь: | FFC PANEL LEFT |
| Парткод: | 302KH46020 |
| Деталь: | FFC PANEL RIGHT |
| Парткод: | 302KH46030 |
| Деталь: | WIRE LCD |
| Парткод: | 302KH46040 |
| Деталь: | FFC ENGINE-LVU |
| Парткод: | 302KH46110 |
| Деталь: | WIRE MOTOR |
| Парткод: | 302KH46120 |
| Деталь: | FFC CASSETTE |
| Парткод: | 302KH46150 |
| Деталь: | PARTS HVU SP |
| Парткод: | 302KK94400 |
| Деталь: | FFC HVU |
| Парткод: | 302KK46090 |
| Деталь: | WIRE PF |
| Парткод: | 302KK46100 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM390003++H01 |
| Деталь: | WIRE MAIN POWER |
| Парткод: | 302KH46050 |
| Деталь: | FFC MAIN |
| Парткод: | 302KH46060 |
| Деталь: | AC CORD 120 ASSY |
| Парткод: | 302DA27050 |
| Деталь: | AC CORD 230 ASSY |
| Парткод: | 302DA27060 |
| Деталь: | AC CORD ASSY AS |
| Парткод: | 7AAACCAS+10H002 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | Ролик подачи бумаги |
| Парткод: | 2BJ06010 |
| Цена: | 250 ₽ |
| Деталь: | Вал переноса заряда |
| Парткод: | 302C917301 |
| Цена: | 4 700 ₽ |
| Деталь: | Вал (левый) в узле регистрации |
| Парткод: | 302KK94231 |
| Цена: | 6 400 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-460 |
| Цена: | 13 900 ₽ |
| Деталь: | Узел переноса заряда в драм-картридже, в сборе |
| Парткод: | MC-460 |
| Цена: | 6 100 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-460 |
| Цена: | 15 800 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-460 |
| Цена: | 19 100 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Guide-Claw |
| Парткод: | 302LH25610 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-460 |
| Цена: | 14 000 ₽ |
| Деталь: | BUSH 8 EW |
| Парткод: | 302H024360 |
| Цена: | 30 ₽ |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | GEAR Z15 REGIST |
| Парткод: | 2C907130 |
| Деталь: | STOPPER BUSH REG |
| Парткод: | 2C916080 |
| Деталь: | GEAR Z15 REGIST |
| Парткод: | 2C916180 |
| Деталь: | SPACER REG F |
| Парткод: | 2C916270 |
| Деталь: | GEAR TRANSFER |
| Парткод: | 2C917020 |
| Деталь: | REINFORCEMENT TRANS GUIDE |
| Парткод: | 2C917050 |
| Деталь: | COLLAR TRANS |
| Парткод: | 2C917110 |
| Деталь: | SPRING GUIDE TRANS |
| Парткод: | 2C917150 |
| Деталь: | BUSH TRANS ROLL F |
| Парткод: | 2C917180 |
| Деталь: | ROLLER TRANSFER |
| Парткод: | 302C917011 |
| Деталь: | COLLAR TRANS ROLLER |
| Парткод: | 302GR22110 |
| Деталь: | BUSH TRANS GUIDE |
| Парткод: | 302H022100 |
| Деталь: | BUSH TRANSFER |
| Парткод: | 302H022160 |
| Деталь: | FILM REGIST R |
| Парткод: | 2C907530 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 302C907171 |
| Цена: | 230 ₽ |
| Деталь: | RIGHT GUIDE REGIST |
| Парткод: | 302KK24150 |
| Деталь: | SPRING REGIST SW |
| Парткод: | 302KK24270 |
| Деталь: | LEVER CONVEYING REAR |
| Парткод: | 2C916070 |
| Деталь: | SPRING CONVEYING BASE |
| Парткод: | 2C916120 |
| Деталь: | GUIDE FEED A |
| Парткод: | 2C916170 |
| Деталь: | HOUSING STA ELIMINATION |
| Парткод: | 2C917070 |
| Деталь: | PLATE STA ELIMINATION |
| Парткод: | 2C917080 |
| Деталь: | BASE CONVEYING |
| Парткод: | 302KK24010 |
| Деталь: | SHAFT CONVEYING LEVER |
| Парткод: | 302KK24040 |
| Деталь: | LEVER CONVEYING FRONT |
| Парткод: | 302KK24060 |
| Деталь: | TERMINAL PLATE TRANS |
| Парткод: | 302KK24070 |
| Деталь: | TERMINAL STA ELIMINATION |
| Парткод: | 302KK24080 |
| Деталь: | SPRING EARTH CONVEYING |
| Парткод: | 302KK24200 |
| Деталь: | GUIDE CONVEYING |
| Парткод: | 302KK24220 |
| Деталь: | SPRING LEVER SHAFT |
| Парткод: | 302KK24280 |
| Деталь: | STRAP LEFT COVER C |
| Парткод: | 302KK04530 |
| Деталь: | CAM MPF |
| Парткод: | 302KK08040 |
| Деталь: | MPF PAPER GUIDE F |
| Парткод: | 302KK08100 |
| Деталь: | MPF PAPER GUIDE R |
| Парткод: | 302KK08110 |
| Деталь: | SHAFT MPF |
| Парткод: | 302KK08120 |
| Деталь: | PULLEY BYPASS |
| Парткод: | 302KK08210 |
| Цена: | 750 ₽ |
| Деталь: | GUIDE LEFT TRANS FRONT |
| Парткод: | 302KK24020 |
| Деталь: | PARTS ROLLER REGIST LEFT SP |
| Парткод: | 302KK94230 |
| Деталь: | FILM GUIDE REGIST F |
| Парткод: | 302KK24120 |
| Деталь: | FILM GUIDE REGIST R |
| Парткод: | 302KK24130 |
| Деталь: | RIGHT ROLL REGIST |
| Парткод: | 302KK24140 |
| Цена: | 2 100 ₽ |
| Деталь: | BUSH REGIST |
| Парткод: | 302KK24250 |
| Цена: | 60 ₽ |
| Деталь: | SPRING REGIST A |
| Парткод: | 302KK24290 |
| Деталь: | SPRING TRANS A |
| Парткод: | 302KK24300 |
| Деталь: | SEAL TRANS LEFT |
| Парткод: | 302KK24310 |
| Деталь: | SEAL TRANS RIGHT |
| Парткод: | 302KK24320 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | SPRING PIN / M2 X 14 S-BLK |
| Парткод: | 5MBP2014WXSP |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +BIND T.T S SCREW 3X6 |
| Парткод: | 7BB100306H1 |
| Деталь: | PARTS FILM TRANS FRONT ASSY SP |
| Парткод: | 302KK94480 |
| Деталь: | PULLEY,DRUM SEPARATION |
| Парткод: | 2A118370 |
| Цена: | 90 ₽ |
| Деталь: | SPRING,CLAW SEPARATION |
| Парткод: | 2AR18280 |
| Цена: | 130 ₽ |
| Деталь: | BLADE CLEANING |
| Парткод: | 2C918010 |
| Деталь: | LOWER SEAL CLEANING |
| Парткод: | 2C918040 |
| Цена: | 550 ₽ |
| Деталь: | FRONT COVER CLEANING |
| Парткод: | 2C918050 |
| Цена: | 140 ₽ |
| Деталь: | HOLDER CLAW |
| Парткод: | 2C918340 |
| Цена: | 70 ₽ |
| Деталь: | CLAW SEPARATION |
| Парткод: | 302C918371 |
| Цена: | 600 ₽ |
| Деталь: | FLICKER B |
| Парткод: | 302KK12210 |
| Деталь: | GRID |
| Парткод: | 2C910040 |
| Цена: | 460 ₽ |
| Деталь: | CORONA WIRE MCH SP |
| Парткод: | 302C968290 |
| Деталь: | SPRING WIRE /49585J0058 A4 |
| Парткод: | 5MMW141LX002 |
| Цена: | 80 ₽ |
| Деталь: | PIN CHARGER /A-49 CHARGER A4 |
| Парткод: | 5MVT263NN001 |
| Цена: | 160 ₽ |
| Деталь: | TANK DISPOSAL |
| Парткод: | 2C918150 |
| Деталь: | CAP TANK DISPOSAL |
| Парткод: | 2C918170 |
| Деталь: | LABEL CAUTION TONER |
| Парткод: | 302F934090 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +TP-FLAT T.T S SCREW 4X14 SR |
| Парткод: | 7BB702414H |
| Деталь: | MK-460/MAINTENANCE KIT (OPTION) |
| Парткод: | 1702KH0UN0 |
| Деталь: | MC-460 |
| Парткод: | 302KK93080 |
| Деталь: | Вал (левый) в узле регистрации |
| Парткод: | 302KK94231 |
| Цена: | 6 400 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-460 |
| Цена: | 13 900 ₽ |
| Деталь: | Узел переноса заряда в драм-картридже, в сборе |
| Парткод: | MC-460 |
| Цена: | 6 100 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-460 |
| Цена: | 15 800 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-460 |
| Цена: | 19 100 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Guide-Claw |
| Парткод: | 302LH25610 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-460 |
| Цена: | 14 000 ₽ |
| Деталь: | FILM BASE B |
| Парткод: | 2C902240 |
| Деталь: | PLATE SIZE DETECTION |
| Парткод: | 2C907060 |
| Деталь: | STOPPER CASSETTE |
| Парткод: | 2C907100 |
| Деталь: | SPRING LEVER |
| Парткод: | 2C907350 |
| Деталь: | PLATE POSITION A |
| Парткод: | 302H002130 |
| Деталь: | PLATE POSITION C |
| Парткод: | 302H002210 |
| Деталь: | FOOT |
| Парткод: | 302HN02610 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | SHIELD SCREW |
| Парткод: | 302H002380 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610010++H01 |
| Деталь: | BASE REAR RIGHT |
| Парткод: | 302KK02170 |
| Деталь: | SPACER DRUM |
| Парткод: | 302KK02180 |
| Деталь: | COVER CONNECTOR |
| Парткод: | 302KK02210 |
| Деталь: | ACTUATOR EMPTY |
| Парткод: | 302KK02240 |
| Деталь: | MOUNT FRONT COVER |
| Парткод: | 302KK02260 |
| Деталь: | FILM PE |
| Парткод: | 302KK02370 |
| Деталь: | REINFORCEMENT REAR FRAME |
| Парткод: | 302KK02400 |
| Деталь: | FILM HANDLE |
| Парткод: | 302KK02430 |
| Деталь: | SPONGE STAY CONT |
| Парткод: | 302KK02440 |
| Деталь: | LEVER PICK UP |
| Парткод: | 302KK06060 |
| Деталь: | RIGHT MOUNT REGIST |
| Парткод: | 302KK24230 |
| Деталь: | SPRING EARTH MOUNT |
| Парткод: | 302KK24240 |
| Деталь: | SHEET STAY FUSER GUIDE |
| Парткод: | 302KK33030 |
| Деталь: | SHEET WIRE REAR |
| Парткод: | 302KK39590 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR |
| Парткод: | 7BB702308H |
| Деталь: | LABEL SEP CLEANING |
| Парткод: | 302KK34120 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610009++H01 |
| Деталь: | GEAR 16,BYPASS |
| Парткод: | 29807100 |
| Деталь: | PULLEY,PAPER FEED |
| Парткод: | 2AR07220 |
| Цена: | 1 600 ₽ |
| Деталь: | PULLEY,SEPARATION |
| Парткод: | 2AR07230 |
| Цена: | 360 ₽ |
| Деталь: | PULLEY,LEADING FEED |
| Парткод: | 2AR07240 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | LEVER CONT RELEASE |
| Парткод: | 2BL04200 |
| Деталь: | BRUSH CLEANER |
| Парткод: | 2BL16220 |
| Деталь: | SPRING DEV PUSH |
| Парткод: | 2C902080 |
| Деталь: | SPRING DEV PUSH F |
| Парткод: | 2C902590 |
| Деталь: | ARM INTERLOCK SW |
| Парткод: | 2C904300 |
| Деталь: | SPRING LEFT INTERLOCK |
| Парткод: | 2C904340 |
| Деталь: | SHAFT PICK UP B |
| Парткод: | 2C907230 |
| Деталь: | PLATE PICK UP B |
| Парткод: | 2C907240 |
| Деталь: | HOLDER RETARD |
| Парткод: | 2C907250 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | SPRING RETARD |
| Парткод: | 2C907320 |
| Деталь: | SPRING PICK UP |
| Парткод: | 2C907340 |
| Деталь: | HOLDER PULLEY A |
| Парткод: | 2C907400 |
| Деталь: | PULLEY GUIDE A |
| Парткод: | 2C907410 |
| Деталь: | HOLDER FEED SHAFT |
| Парткод: | 2C907420 |
| Деталь: | BUSH PAPER FEED C |
| Парткод: | 2C907430 |
| Цена: | 190 ₽ |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | BASE REAR LEFT |
| Парткод: | 302KK02160 |
| Деталь: | PLATE HOOK REAR |
| Парткод: | 302KK02190 |
| Деталь: | FILM BASE PC |
| Парткод: | 302KK02220 |
| Деталь: | UPPER PLATE DRUM |
| Парткод: | 302KK02330 |
| Деталь: | RAIL DLP |
| Парткод: | 302KK02340 |
| Деталь: | LEVER DEV PUSH |
| Парткод: | 302KK02350 |
| Деталь: | SEAL WIRE BASE |
| Парткод: | 302KK02380 |
| Деталь: | STAY REAR COVER |
| Парткод: | 302KK02410 |
| Деталь: | COVER INNER TOP |
| Парткод: | 302KK04210 |
| Деталь: | MOUNT LEFT INTERLOCK |
| Парткод: | 302KK04540 |
| Деталь: | LEFT RAIL CASSETTE |
| Парткод: | 302KK06010 |
| Деталь: | TORQUE LIMITER 340 |
| Парткод: | 302KK06050 |
| Деталь: | SHAFT PAPER FEED |
| Парткод: | 302KK06070 |
| Деталь: | SHAFT RETARD |
| Парткод: | 302KK06080 |
| Цена: | 200 ₽ |
| Деталь: | ACTUATOR MPF |
| Парткод: | 302KK08190 |
| Цена: | 60 ₽ |
| Деталь: | DUCT REAR UPPER |
| Парткод: | 302KK33011 |
| Деталь: | DUCT REAR LOWER |
| Парткод: | 302KK33021 |
| Деталь: | GUIDE WIRE BOX |
| Парткод: | 302KK39540 |
| Деталь: | PARTS FAN COOLING 80-25 A SP |
| Парткод: | 302KK94360 |
| Цена: | 5 700 ₽ |
| Деталь: | FILTER OZONE A |
| Парткод: | 302KK33050 |
| Деталь: | SPRING PIN / M2 X 10 S-BLK |
| Парткод: | 5MBP2010WXSP |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +BIND T.T P SCREW 4X10(BLACK) |
| Парткод: | 7BB280410H |
| Деталь: | +BIND T.T P SCREW 4X10 |
| Парткод: | 7BB200410H |
| Деталь: | +BIND T.T S SCREW 4X30 SR |
| Парткод: | 7BB700430H |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR |
| Парткод: | 7BB702308H |
| Деталь: | PCB EJECT SW ASSY |
| Парткод: | 2C901060 |
| Деталь: | WIRE EJECT |
| Парткод: | 302KH46130 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | SPRING ACTUATOR L |
| Парткод: | 2BL21260 |
| Деталь: | GEAR 23 EXIT |
| Парткод: | 2C921120 |
| Деталь: | SPRING LINK |
| Парткод: | 2C921290 |
| Деталь: | BELT EXIT |
| Парткод: | 2C921340 |
| Деталь: | PULLEY EXIT |
| Парткод: | 2C921350 |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | SPRING ACTUATOR INNER |
| Парткод: | 302C921331 |
| Деталь: | FRAME EXIT LOWER |
| Парткод: | 302KK28020 |
| Деталь: | PULLEY EXIT |
| Парткод: | 302KK28030 |
| Деталь: | SPRING EXIT PULLEY |
| Парткод: | 302KK28040 |
| Деталь: | ACTUATOR EXIT INNER |
| Парткод: | 302KK28070 |
| Цена: | 110 ₽ |
| Деталь: | FRAME EXIT UPPER |
| Парткод: | 302KK28010 |
| Деталь: | EARTH EXIT UNIT |
| Парткод: | 302KK28050 |
| Деталь: | GUIDE SHIFT |
| Парткод: | 302KK28060 |
| Деталь: | ACTUATOR EXIT LEFT |
| Парткод: | 302KK28080 |
| Цена: | 120 ₽ |
| Деталь: | PARTS ROLLER EXIT INNER SP |
| Парткод: | 302KK94300 |
| Деталь: | PARTS ROLLER FEED SHIFT SP |
| Парткод: | 302KK94310 |
| Деталь: | PLATE EXIT |
| Парткод: | 302KK28110 |
| Деталь: | ARM LINK |
| Парткод: | 302KK28120 |
| Деталь: | GUIDE ROLLER INNER |
| Парткод: | 302KK28130 |
| Деталь: | STATIC ELMINATOR EXIT |
| Парткод: | 302KK28150 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +TP-FLAT T.T S SCREW 3X8 SR |
| Парткод: | 7BB702308H |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | BUSH 8 EW |
| Парткод: | 302H024360 |
| Цена: | 30 ₽ |
| Деталь: | BUSH 6 EW |
| Парткод: | 302H024370 |
| Цена: | 190 ₽ |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | MOTOR EJECT |
| Парткод: | 302FB25100 |
| Цена: | 3 600 ₽ |
| Деталь: | PLATE EXIT DRIVE |
| Парткод: | 302KK31030 |
| Деталь: | PLATE BYPASS DRIVE A |
| Парткод: | 302KK31040 |
| Деталь: | SHAFT DPX DRIVE |
| Парткод: | 302KK31090 |
| Деталь: | SHAFT BYPASS CAM |
| Парткод: | 302KK31100 |
| Деталь: | GEAR BYPASS Z29-Z23 |
| Парткод: | 302KK31290 |
| Деталь: | GEAR BYPASS Z30 |
| Парткод: | 302KK31300 |
| Деталь: | GEAR BYPASS Z36 A |
| Парткод: | 302KK31310 |
| Деталь: | GEAR BYPASS Z36 B |
| Парткод: | 302KK31320 |
| Деталь: | GEAR BYPASS Z27 A |
| Парткод: | 302KK31340 |
| Деталь: | GEAR BYPASS Z27 B |
| Парткод: | 302KK31350 |
| Деталь: | CAM BYPASS |
| Парткод: | 302KK31360 |
| Деталь: | GEAR DPX Z32 |
| Парткод: | 302KK31380 |
| Деталь: | GEAR DPX Z27 |
| Парткод: | 302KK31390 |
| Деталь: | PLATE BYPASS CAM |
| Парткод: | 302KK31400 |
| Деталь: | LEVER CAM A |
| Парткод: | 302KK31410 |
| Деталь: | LEVER CAM B |
| Парткод: | 302KK31420 |
| Деталь: | SPRING CAM A |
| Парткод: | 302KK31430 |
| Деталь: | SPRING CAM B |
| Парткод: | 302KK31440 |
| Деталь: | GEAR BYPASS Z27-Z23 |
| Парткод: | 302KK31640 |
| Деталь: | GEAR BYPASS Z35-Z23 |
| Парткод: | 302KK31650 |
| Деталь: | PLATE BYPASS DRIVE B |
| Парткод: | 302KK31660 |
| Деталь: | GEAR EXIT Z43-Z20 |
| Парткод: | 302KK31700 |
| Деталь: | PARTS SOLENOID BYPASS SP |
| Парткод: | 302KK94350 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | FG PLATE A |
| Парткод: | 302DA25520 |
| Деталь: | LID CENTER COVER |
| Парткод: | 302HB05100 |
| Деталь: | COVER OPERATION MFP |
| Парткод: | 302KH05010 |
| Деталь: | CENTER OPE COVER |
| Парткод: | 302KH05140 |
| Деталь: | LID FAX KEY |
| Парткод: | 302KH05150 |
| Деталь: | SPACER OPE PWB B |
| Парткод: | 302KH05160 |
| Деталь: | FG PLATE B |
| Парткод: | 302KH05210 |
| Деталь: | MOUNT OPE RIGHT MFP |
| Парткод: | 302KH05220 |
| Деталь: | SPRING GROUND |
| Парткод: | 302KH05230 |
| Деталь: | LEFT OPE SHEET E |
| Парткод: | 302KH05250 |
| Деталь: | SHEET SAVER E |
| Парткод: | 302KH05300 |
| Деталь: | SHEET SHIELD |
| Парткод: | 302KH05320 |
| Деталь: | SHEET OPE MFP CENTER E |
| Парткод: | 302KH05340 |
| Деталь: | PARTS PWB PANEL ASSY SP |
| Парткод: | 302KH94030 |
| Деталь: | PARTS KEY OPERATION 10 SP |
| Парткод: | 302KH94050 |
| Деталь: | PARTS KEY LANGUAGE SP |
| Парткод: | 302KH94060 |
| Деталь: | PARTS KEY POWER SP |
| Парткод: | 302KH94070 |
| Деталь: | PARTS KEY FUNCTION A SP |
| Парткод: | 302KH94080 |
| Деталь: | PARTS KEY DECISION SP |
| Парткод: | 302KH94090 |
| Деталь: | PARTS KEY STATUS SP |
| Парткод: | 302KH94100 |
| Деталь: | PARTS KEY EXPOSURE SP |
| Парткод: | 302KH94110 |
| Деталь: | PARTS KEY FUNCTION B SP |
| Парткод: | 302KH94120 |
| Деталь: | PARTS KEY SELECT SP |
| Парткод: | 302KH94130 |
| Деталь: | PARTS KEY FAX SP |
| Парткод: | 302KH94140 |
| Деталь: | PARTS KEY RESET SP |
| Парткод: | 302KH94150 |
| Деталь: | PARTS LCD OPERATION SP |
| Парткод: | 302KH94190 |
| Деталь: | SHEET KEYBOARD E |
| Парткод: | 302KK05220 |
| Деталь: | RIGHT SPACER OPERATION |
| Парткод: | 302KK05350 |
| Деталь: | PARTS KEY MANAGE SP |
| Парткод: | 302KK94100 |
| Деталь: | PARTS KEY SAVER SP |
| Парткод: | 302KK94110 |
| Деталь: | PARTS KEY STOP SP |
| Парткод: | 302KK94180 |
| Деталь: | PARTS KEY PRINT SP |
| Парткод: | 302KK94190 |
| Деталь: | +BIND T.T P SCREW 3X8 |
| Парткод: | 7BB200308H |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +BIND T.T P SCREW 4X10(BLACK) |
| Парткод: | 7BB280410H |
| Деталь: | +BIND T.T P SCREW 3X12 |
| Парткод: | 7BB200312H |
| Деталь: | PARTS OPE ASSY(A) |
| Парткод: | 302KH94210 |
| Деталь: | PARTS OPE ASSY(E) |
| Парткод: | 302KH94220 |
| Деталь: | LEVER,CASSETTE BASE RELEASE |
| Парткод: | 19507050 |
| Деталь: | PLATE SIDE SW |
| Парткод: | 2C907050 |
| Деталь: | SPRING SIDE SW |
| Парткод: | 2C907090 |
| Деталь: | PAD CASSETTE |
| Парткод: | 2C907140 |
| Деталь: | SPRING CURSOR R |
| Парткод: | 2C907360 |
| Деталь: | PIN CURSOR C |
| Парткод: | 2C907600 |
| Деталь: | SPRING LEVER F |
| Парткод: | 2C907620 |
| Деталь: | CASSETTE |
| Парткод: | 302KK09010 |
| Деталь: | COVER CASSETTE |
| Парткод: | 302KK09020 |
| Деталь: | BOTTOM CASSETTE |
| Парткод: | 302KK09080 |
| Деталь: | REAR CURSOR C |
| Парткод: | 302KK09090 |
| Деталь: | FRONT CURSOR C |
| Парткод: | 302KK09100 |
| Деталь: | SPRING BOTTOM GROUND |
| Парткод: | 302KK09110 |
| Деталь: | CASSETTE HANDLE SIL |
| Парткод: | 302KK09130 |
| Деталь: | HOLDER RIGHT CURSOR |
| Парткод: | 302KK09150 |
| Деталь: | TURN PLATE CASSETTE |
| Парткод: | 302KK09160 |
| Деталь: | RIGHT CURSOR A |
| Парткод: | 302KK09170 |
| Деталь: | LEVER CURSOR C |
| Парткод: | 302KK09180 |
| Деталь: | LABEL CASSETTE SIZE I |
| Парткод: | 302KK09200 |
| Деталь: | LABEL CASSETTE SIZE C |
| Парткод: | 302KK09190 |
| Деталь: | LABEL CASSETTE |
| Парткод: | 302KK09210 |
| Деталь: | SPRING BOTTOM |
| Парткод: | 302KK09220 |
| Деталь: | LABEL CASSETTE LGR |
| Парткод: | 302KK34100 |
| Деталь: | GEAR 18,CASSETTE |
| Парткод: | 34907141 |
| Деталь: | SPRING BELT GUIDE ROLLER |
| Парткод: | 76508130 |
| Деталь: | PIN CURSOR |
| Парткод: | 302GR09220 |
| Деталь: | CT-460(I) |
| Парткод: | 302KK93150 |
| Деталь: | CT-460(C) |
| Парткод: | 302KK93140 |
| Деталь: | LK-460 |
| Парткод: | 302KK93060 |
| Деталь: | +81NDT.TS S CREW 3X12 SR |
| Парткод: | 788700312H |
| Деталь: | Вал (левый) в узле регистрации |
| Парткод: | 302KK94231 |
| Цена: | 6 400 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-460 |
| Цена: | 13 900 ₽ |
| Деталь: | Узел переноса заряда в драм-картридже, в сборе |
| Парткод: | MC-460 |
| Цена: | 6 100 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-460 |
| Цена: | 15 800 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-460 |
| Цена: | 19 100 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Guide-Claw |
| Парткод: | 302LH25610 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-460 |
| Цена: | 14 000 ₽ |
| Деталь: | PCB MPF SIZE ASSY |
| Парткод: | 2C901050 |
| Деталь: | WIRE MPF SIZE |
| Парткод: | 302KK46330 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | STOPPER 5,RING |
| Парткод: | 2BC06990 |
| Деталь: | BUSH 8 EW |
| Парткод: | 302H024360 |
| Цена: | 30 ₽ |
| Деталь: | CUT WASHER 5 |
| Парткод: | 302H714830 |
| Деталь: | MOUNT BASE MPF PAD |
| Парткод: | 302KK08180 |
| Деталь: | SPRING MPF PAD |
| Парткод: | 302KK08200 |
| Деталь: | SHEET ABSORBER |
| Парткод: | 302KK08250 |
| Деталь: | TERMINAL PAPER SIZE |
| Парткод: | 2C906090 |
| Деталь: | GEAR 18 BYPASS |
| Парткод: | 2C906080 |
| Деталь: | FRONT CURSOR BYPASS |
| Парткод: | 302KK08050 |
| Деталь: | REAR CURSOR BYPASS |
| Парткод: | 302KK08060 |
| Деталь: | TABLE BYPASS |
| Парткод: | 302KK08170 |
| Деталь: | LIFT PLATE MPF |
| Парткод: | 302KK08010 |
| Деталь: | STOPPER MPF |
| Парткод: | 302KK08030 |
| Деталь: | SHEET MPF LIFT |
| Парткод: | 302KK08220 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | SPRING BYPASS TEBLE |
| Парткод: | 302FB17700 |
| Деталь: | COVER BYPASS |
| Парткод: | 302KK08160 |
| Деталь: | HOOK LEFT COVER F |
| Парткод: | 2C904260 |
| Деталь: | HOOK LEFT COVER R |
| Парткод: | 2C904270 |
| Деталь: | JUNCTION PLATE HOOK |
| Парткод: | 2C904280 |
| Деталь: | SPRING LEFT HOOK |
| Парткод: | 2C904350 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2C921040 |
| Деталь: | SPRING PULLEY FEED SHIFT |
| Парткод: | 2C921200 |
| Деталь: | SPRING GUIDE DU |
| Парткод: | 2C921221 |
| Деталь: | SPRING SEPARATE |
| Парткод: | 2C921280 |
| Деталь: | SHOULDER SCREW EXIT |
| Парткод: | 2C921400 |
| Деталь: | SHAFT HOOK |
| Парткод: | 302C904251 |
| Деталь: | LEFT COVER |
| Парткод: | 302KK04500 |
| Деталь: | PLATE HOOK F |
| Парткод: | 302KK04550 |
| Деталь: | PLATE HOOK R |
| Парткод: | 302KK04560 |
| Деталь: | GUIDE EXIT LOWER |
| Парткод: | 302KK28410 |
| Деталь: | GUIDE DU |
| Парткод: | 302KK28420 |
| Деталь: | GUIDE SEPARATE |
| Парткод: | 302KK28430 |
| Деталь: | ARM SEPARATE |
| Парткод: | 302KK28440 |
| Деталь: | LABEL HIGH TEMP |
| Парткод: | 302KK34080 |
| Деталь: | STRAP LEFT COVER A |
| Парткод: | 302KK04510 |
| Деталь: | STRAP LEFT COVER B |
| Парткод: | 302KK04520 |
| Деталь: | CUT WASHER 5 |
| Парткод: | 302KK04570 |
| Деталь: | SPRING MPF LIFT |
| Парткод: | 302KK08070 |
| Деталь: | BYPASS SUB TABLE A |
| Парткод: | 302KK08080 |
| Деталь: | BYPASS SUB TABLE B |
| Парткод: | 302KK08090 |
| Деталь: | FILM WIRE MPF |
| Парткод: | 302KK08230 |
| Деталь: | FILM BYPASS TABLE |
| Парткод: | 302KK08240 |
| Деталь: | SHAFT CONVEYING |
| Парткод: | 302KK24050 |
| Деталь: | HOLDER CONVEYING SHAFT |
| Парткод: | 302KK24260 |
| Деталь: | LABEL BYPASS TABLE |
| Парткод: | 302KK34090 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | PARTS BYPASS PAD ASSY SP |
| Парткод: | 302KK94450 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | PARTS LVU100(M) SP |
| Парткод: | 302KH94170 |
| Деталь: | PARTS LVU200(M) SP |
| Парткод: | 302KH94180 |
| Деталь: | PARTS PWB INTERFACE ASSY SP |
| Парткод: | 302KK94040 |
| Деталь: | PARTS DISPOSAL SENSOR ASSY SP |
| Парткод: | 302KK94060 |
| Деталь: | COVER TE SENSOR |
| Парткод: | 302KK02360 |
| Деталь: | WIRE MPF |
| Парткод: | 302KK46050 |
| Деталь: | WIRE CLUTCH |
| Парткод: | 302KK46060 |
| Деталь: | WIRE CASSETTE PE |
| Парткод: | 302KK46070 |
| Деталь: | WIRE INLET |
| Парткод: | 302KK46150 |
| Деталь: | WIRE MAIN SW |
| Парткод: | 302KK46160 |
| Деталь: | WIRE PRIMARY |
| Парткод: | 302KK46170 |
| Деталь: | WIRE RFID |
| Парткод: | 302KK46210 |
| Деталь: | PUSH SWITCH 03 SN /SW-192 N |
| Парткод: | 5ESP03090001+01 |
| Деталь: | SW.SEESAW |
| Парткод: | 7SC010101+++H01 |
| Деталь: | SW.MICRO |
| Парткод: | 7SM010202+++H01 |
| Деталь: | SW.PUSH |
| Парткод: | 7SP01000001+H01 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC05B1106+H01 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210002++H01 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210005++H01 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210006++H01 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM390003++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610007++H01 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610008++H01 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610009++H01 |
| Деталь: | ACCESS.SADDLE |
| Парткод: | 7YZM610010++H01 |
| Деталь: | DETECTION PLATE |
| Парткод: | 2C918350 |
| Деталь: | SPRING DETECTION |
| Парткод: | 2C918360 |
| Деталь: | SEAL WIRE A |
| Парткод: | 302H012330 |
| Деталь: | PLATE CASS HEATER |
| Парткод: | 302KK02150 |
| Деталь: | PARTS HEATER DEHUMIDIFIER 120 SP |
| Парткод: | 302KK94430 |
| Деталь: | PARTS HEATER DEHUMIDIFIER 230 SP |
| Парткод: | 302KK94440 |
| Деталь: | +BIND T.T S SCREW 3X8 SR |
| Парткод: | 7BB700308H |
| Деталь: | +BIND T.T S SCREW 3X16 SR |
| Парткод: | 7BB700316H |
| Деталь: | +TP-CUP M SCREW 4X8 R |
| Парткод: | 7BB607408H |
| Деталь: | PARTS CONT SENSOR ASSY SP |
| Парткод: | 302KK94070 |
| Деталь: | PARTS DEH ASSY 120 SP (Option) |
| Парткод: | 302KK94460 |
| Деталь: | PARTS DEH ASSY 230 SP (Option) |
| Парткод: | 302KK94470 |
| Деталь: | LEVER,CASSETTE BASE RELEASE |
| Парткод: | 19507050 |
| Деталь: | PLATE SIDE SW |
| Парткод: | 2C907050 |
| Деталь: | SPRING SIDE SW |
| Парткод: | 2C907090 |
| Деталь: | PAD CASSETTE |
| Парткод: | 2C907140 |
| Деталь: | SPRING CURSOR R |
| Парткод: | 2C907360 |
| Деталь: | PIN CURSOR C |
| Парткод: | 2C907600 |
| Деталь: | SPRING LEVER F |
| Парткод: | 2C907620 |
| Деталь: | CASSETTE |
| Парткод: | 302KK09010 |
| Деталь: | COVER CASSETTE |
| Парткод: | 302KK09020 |
| Деталь: | BOTTOM CASSETTE |
| Парткод: | 302KK09080 |
| Деталь: | REAR CURSOR C |
| Парткод: | 302KK09090 |
| Деталь: | FRONT CURSOR C |
| Парткод: | 302KK09100 |
| Деталь: | SPRING BOTTOM GROUND |
| Парткод: | 302KK09110 |
| Деталь: | CASSETTE HANDLE SIL |
| Парткод: | 302KK09130 |
| Деталь: | HOLDER RIGHT CURSOR |
| Парткод: | 302KK09150 |
| Деталь: | TURN PLATE CASSETTE |
| Парткод: | 302KK09160 |
| Деталь: | RIGHT CURSOR A |
| Парткод: | 302KK09170 |
| Деталь: | LEVER CURSOR C |
| Парткод: | 302KK09180 |
| Деталь: | LABEL CASSETTE SIZE I |
| Парткод: | 302KK09200 |
| Деталь: | LABEL CASSETTE SIZE C |
| Парткод: | 302KK09190 |
| Деталь: | LABEL CASSETTE |
| Парткод: | 302KK09210 |
| Деталь: | SPRING BOTTOM |
| Парткод: | 302KK09220 |
| Деталь: | LABEL CASSETTE LGR |
| Парткод: | 302KK34100 |
| Деталь: | GEAR 18,CASSETTE |
| Парткод: | 34907141 |
| Деталь: | SPRING BELT GUIDE ROLLER |
| Парткод: | 76508130 |
| Деталь: | PIN CURSOR |
| Парткод: | 302GR09220 |
| Деталь: | CT-460(I) |
| Парткод: | 302KK93150 |
| Деталь: | CT-460(C) |
| Парткод: | 302KK93140 |
Коды ошибок
C0030
C0070
C0100
C0110
C0130
C0140
C0150
C0160
C0170
C0180
C0210
C0240
C0250
C0280
C0410
C0420
C0440
C0500
C0510
C0610
C0630
C0800
C0820
C0830
C0860
C0870
C0880
C0890
C0900
C0920
C2000
C2200
C3100
C3200
C3300
C4000
C4010
C4200
C6000
C6020
C6050
C6400
C7800
C7810
C8170
C8180
C8190
C8210
Описание
| Error code: | C0030 |
| Description: | FAX PWB system error |
| Causes: | The FAX processing cannot be continued due to the FAX firmware error. |
| Remedy: | 1 Resetting the main power The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 2 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 3 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. |
| Error code: | C0070 |
| Description: | Toner motor |
| Causes: | Abnormal detection of FAX control PWB incompatibility in the initial communication with the FAX control PWB, any normal communication command is not transmitted. |
| Remedy: | 1 Checking the FAX PWB The incompatible FAX PWB is installed. Install the FAX PWB for the applicable model. 2 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 3 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0100 |
| Description: | Charge corona winding problem |
| Causes: | An abnormal status is output from the flash memory. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. If not repaired, replace the main PWB. |
| Error code: | C0110 |
| Description: | Backup memory data problem (main PWB) • Data in the specified area of the backup memory does not match the specified values. |
| Causes: | Problem with the backup memory data. Defective main PWB. |
| Remedy: | Problem with the backup memory data. Run maintenance item U021 to set the contents of the backup memory data again. Defective main PWB. If the C0110 is displayed after initializing the backup memory, replace the main PWB and check for correct operation. |
| Error code: | C0130 |
| Description: | Backup memory read / write error |
| Causes: | The reading or writing into the flash memory is unavailable. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reconnect the connectors on the main PWB. At that time, fix or replace the wires if they are pinched by other parts or have any damage. When the issue is not resolved, replace the main PWB. |
| Error code: | C0140 |
| Description: | Backup memory (EEPROM) data problem • Reading data from EEPROM is abnormal. |
| Causes: | Data damage of EEPROM. |
| Remedy: | Contact the Service Administrative Division. |
| Error code: | C0150 |
| Description: | Engine EEPROM reading / writing error |
| Causes: | 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing data. 2. The data read reading in 2 points mismatches 8 times continuously. 3. The read data and the write data mismatch 8 times continuously. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0160 |
| Description: | Engine PWB EEPROM data error |
| Causes: | The data read from the EEPROM is judged as abnormal. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Executing U021 The storage data in the EEPROM on the engine PWB is faulty. Execute U021. Executing U021 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. |
| Error code: | C0170 |
| Description: | Charger count error |
| Causes: | The values in one of the billing counters, life counter or the scanner counter mismatch between the main side and the engine side. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. Detaching and reattaching the main PWB 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0180 |
| Description: | Machine serial number mismatch |
| Causes: | The machine serial Nos. in the main PWB and the EEPROM on the engine PWB mismatch when turning the power on. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. Executing U004 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0210 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and engine CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC1 on the main PWB and YC1 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0240 |
| Description: | Printer board* communication problem • The printer board does not respond 120 seconds after the power is turned on. |
| Causes: | Poor contact in the connector terminals. DIMM installed incorrectly. Defective main PWB or printer board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC9 on the main PWB and YC5 on the printer board, and the continuity across the connector terminals. Repair or replace if necessary. DIMM installed incorrectly. Check the connection. Repair or replace if necessary. Defective main PWB or printer board. Replace the main PWB or printer board and check for correct operation. |
| Error code: | C0250 |
| Description: | Network scanner board* communication problem • The response to the alive command to the network scanner transmitted once to 30 s does not come on the contrary three consecutive times or more. • The response to the communication command transmitted to the network scanner does not return 75 s or more. |
| Causes: | Poor contact in the connector terminals. Defective main PWB or network scanner board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the main PWB and the connector on the network scanner board, and the continuity across the connector terminals. Repair or replace if necessary. Defective main PWB or network scanner board. Replace the main PWB or network scanner board and check for correct operation. |
| Error code: | C0280 |
| Description: | Communication problem between the fax control PWB and main PWB Communication between the fax control PWB and the main PWB of the machine cannot be performed normally. |
| Causes: | Poor contact in the connector terminals. Defective PWB. |
| Remedy: | Poor contact in the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective PWB. Replace the fax control PWB or main PWB and check for correct operation. |
| Error code: | C0410 |
| Description: | Exposure lamp on too long |
| Causes: | Poor contact in the connector terminals. Defective DP main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC6 on the scanner PWB and YC1 on the DP main PWB, and the continuity across the connector terminals. Repair or replace if necessary Defective DP main PWB. Replace the DP main PWB and check for correct operation. |
| Error code: | C0420 |
| Description: | Side feeder* communication error • A communication error from side feeder is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective side feeder main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC15 on the engine PWB and the connector YC3 on the side feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective side feeder main PWB. Replace the side feeder main PWB. |
| Error code: | C0440 |
| Description: | Document finisher communication problem • A communication error from document finisher is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective finisher main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC14 on the engine PWB and YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective finisher main PWB. Replace the finisher main PWB. |
| Error code: | C0500 |
| Description: | Low fuser temperature |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and YC2 on the deck PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0510 |
| Description: | Low fuser temperature after warm-up |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC4 on the engine PWB and YC2 on the cassette PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0610 |
| Description: | Lens drive problem |
| Causes: | Defective main PWB. |
| Remedy: | Replace the main PWB and check for correct operation. |
| Error code: | C0630 |
| Description: | DMA error |
| Causes: | DMA transmission of the image data does not finish within the certain time. |
| Remedy: | 1 Checking the connection 0 0 2 Checking the connection 0 0 3 Replacing the wire The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPCIS - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. Detaching and reattaching the DP relay PWB 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0800 |
| Description: | Image processing error |
| Causes: | The print sequence jam (J010x) was detected 2 times continuously. |
| Remedy: | 1 Checking the image data The image data is faulty. When this issue occurs only when handling the certain image data, check if the image data is faulty. 2 Checking the situation The printing operation of the certain file is faulty. Acquire the jobs log if the phenomenon can be reproduced by specifying the job when the error was detected.` 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. Detaching and reattaching the main PWB 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
| Error code: | C0820 |
| Description: | Fax control PWB CG ROM checksum error (optional fax) A checksum error occurred with the CG ROM data of the fax control PWB. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0830 |
| Description: | FAX PWB flash program area checksum error |
| Causes: | The program stored in the flash memory on the FAX PWB is broken so it cannot perform. |
| Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 2 Checking the FAX PWB The FAX PWB is not properly connected. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
| Error code: | C0860 |
| Description: | Fax control PWB software switch checksum error (optional fax) A checksum error occurred with the software switch value of the fax control PWB. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0870 |
| Description: | PC FAX Image data transmission error |
| Causes: | Data was not properly transmitted even if the specified times of retry were made when the large volume data is transmitted between the FAX PWB and the main PWB. |
| Remedy: | 1 Resetting the main power The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 2 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 3 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 6 Executing U024 The data stored in the SSD is faulty. Execute U024 [SSD Format]. Executing U024 |
| Error code: | C0880 |
| Description: | Program archive problem (optional fax) When power is turned on, the compressed program in the Flash ROM on the fax control PWB was not successfully decompressed. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0890 |
| Description: | Fax control PWB CG FONT archive problem (optional fax) When power is turned on, the compressed CG font in the Flash ROM on the fax control PWB was not successfully decompressed. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0900 |
| Description: | 3rd drawer lift problem |
| Causes: | Fax software version or main software is earlier. |
| Remedy: | Check the version of the fax software and the main software, upgrade the version to the compatible software. |
| Error code: | C0920 |
| Description: | 1st drawer lift |
| Causes: | The backup data could not be stored since the file system of the flash memory is faulty. |
| Remedy: | 1 Initializing the fax FAX control values are incorrect Execute U600 to initialize the FAX. Executing U600 2 Checking the FAX PWB The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Reinstalling the FAX PWB The FAX PWB is not properly installed. Reinstall the FAX PWB. FAX Installation Guide 4 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 5 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
| Error code: | C2000 |
| Description: | Drive motor problem Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated. |
| Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective drive motor. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective drive motor. Replace the drive motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | C2200 |
| Description: | Drive motor error • LOCK signal remains high for 1 s, 1 s after the drive motor has turned on. |
| Causes: | Poor contact in the drive motor connector terminals. Defective drive motor rotation control circuit. Defective drive transmission system. Defective deck PWB or engine PWB. |
| Remedy: | Poor contact in the drive motor connector terminals. Check the connection of connector YC2 and YC11 on the deck PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective drive motor rotation control circuit. Replace the drive motor. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective deck PWB or engine PWB. Replace the deck PWB or the engine PWB. |
| Error code: | C3100 |
| Description: | Carriage error |
| Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
| Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3200 |
| Description: | LED lamp startup error |
| Causes: | The white reference data acquired by lighting the LED lamp at the initial operation does not reach the specified value. Or, the light amount detected by the CCD PWB is not enough. (2 or more LED lamps do not light. The light does not reach the CCD PWB due to condensation.) |
| Remedy: | 1 Checking the LED lamp The LED lamp does not light. Execute U061 [CCD] and check if the LED lamp is lit. If not, replace the lamp unit. After that, execute U411 [Table(ChartA)]. Detaching and reattaching the lamp unit 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB • LED PWB - CCD PWB Wiring diagram 3 Checking the mirror The mirror or lens is frosted due to condensation. Clean the mirrors. If the condensation at the scanner section is resolved naturally by opening the document processor or the platen cover, turn the power switch off and on. 4 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3300 |
| Description: | CCD AGC error (For the internal count) |
| Causes: | Brightness of the LED lamp is darker while one of the LED lamp does not turn on or brighter than expected when processing the AGC for the CCD lamp. |
| Remedy: | 1 Checking the LED lamp The LED lamp is faulty. Check if the LED lamp lights by executing U061 [CCD]. If it does not light, replace the lamp unit and execute U411 [Table (ChartA) ]. Detaching and reattaching the lamp unit 2 Cleaning the backside of the contact glass The white reference sheet is dirty. Clean the white reference sheet at the backside of the contact glass. Detaching and reattaching the contact glass 3 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • LED PWB - CCD PWB • CCD PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 5 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C4000 |
| Description: | Polygon motor synchronization problem • The revolution does not reach the stable speed within 20 s of the START signal. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4010 |
| Description: | Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4200 |
| Description: | BD steady-state problem • ASIC of the main PWB detects a BD error A for 4000 ms after the polygon motor rotation has been stabilized. |
| Causes: | Defective laser diode. Defective polygon motor. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser diode. Replace the laser scanner unit. Defective polygon motor. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C6000 |
| Description: | IH heating error 1 |
| Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
| Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
| Error code: | C6020 |
| Description: | Fuser center thermistor high temperature error |
| Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
| Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
| Error code: | C6050 |
| Description: | Fuser center thermistor low temperature error |
| Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
| Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
| Error code: | C6400 |
| Description: | Zero-cross signal error • The engine PWB does not detect the zero-crossing signal (Z CROSS SIG) for 5 s. |
| Causes: | Poor contact in the connector terminals. Defective DC power source PWB. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and YC6 on the DC power source PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective DC power source PWB. Check if the zero-crossing signal is output from YC6-3 on the DC power source PWB. If not, replace the DC power source PCB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC6-3 on the DC power source PWB outputs the zero-crossing signal. |
| Error code: | C7800 |
| Description: | Outer thermistor broken (For the internal count) |
| Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7810 |
| Description: | Short-circuited external thermistor • The thermistor input value is 0.5 V or less. |
| Causes: | Poor contact in the connector terminals. Defective humidity sensor. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective humidity sensor. Replace the humidity sensor. Defective engine PWB. Replace the engine PWB. |
| Error code: | C8170 |
| Description: | DF side registration motor 1 error 1 Object: 4000-sheet finisher |
| Causes: | The home position cannot be detected after passing 3s when relocating to the home position. |
| Remedy: | 1 Checking the front DF side registration guide The front DF side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. 5 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8180 |
| Description: | DF side registration motor 1 error 2 Object: 4000-sheet finisher |
| Causes: | J6810/J6811/J6812 (Front DF side registration jam) was detected 2 times continuously. |
| Remedy: | 1 Checking the front DF side registration guide The front side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive components. 3 Replacing the front DF side registration guide drive components The front DF side registration guide drive components are faulty. Replace the front DF side registration guide drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB 5 Checking DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. Executing U240 6 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8190 |
| Description: | DF side registration motor 2 error 1 Object: 4000-sheet finisher |
| Causes: | The home position is not detected when passing 3s while executing the operation of returning to the home position. |
| Remedy: | 1 Checking the rear DF side registration guide The rear DF side registration guide is not assembled properly. If the rear DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear DF side registration guide drive components The rear DF side registration guide drive parts are not properly attached or faulty. Reattach the rear DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 2 - DF main PWB • DF side registration sensor 2 - DF main PWB 4 Replacing DF side registration motor 2 DF side registration motor 2 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking DF side registration sensor 2 DF side registration sensor 2 is not properly attached or faulty. Reattach DF side registration sensor 2 and execute U241 [Finisher] > [Width Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8210 |
| Description: | DF staple motor front/rear error Object: 4000-sheet finisher |
| Causes: | The home position is not detected when passing 3s while returning to the home position at the initial operation. |
| Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple unit is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the DF staple unit drive components The DF staple unit drive parts are not properly attached or faulty. Reattach the DF staple unit drive parts. If not repaired, replace the parts. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple motor - DF main PWB • DF staple sensor - DF main PWB Wiring diagram 4 Replacing the DF staple motor The DF staple motor is faulty. Execute U240 [Motor] > [Staple]. If the DF staple motor does not properly operate, replace the DF staple unit. 5 Checking the DF staple sensor The DF staple sensor is not properly attached or faulty. Reattach the DF staple sensor. Then, replace the DF staple unit if the sensor is not fixed. Detaching and reattaching the DF staple unit 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
