HP LaserJet M9040 MFP
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
300000
Скорость печати
A4
40
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Тип устройства |
МФУ |
Сканер |
|
Копир |
|
Тип |
лазерный/светодиодный |
Макс. формат |
A3 |
Цветность печати |
|
Технология печати |
лазерная |
Область применения |
большой офис |
Размещение |
напольный |
Число страниц в месяц |
300 000 |
Телефон |
|
Печать фотографий |
|
Факс |
|
Принтер |
|
Двусторонняя печать |
|
Прямая печать |
|
Пигментные чернила |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 600 |
Скорость ч/б печати |
|
| A3 | 28 |
| A4 | 40 |
Время выхода первого отпечатка |
|
| Ч/б | 9,5 |
Копир |
|
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
600 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Сканер |
|
Макс. формат оригинала |
A3 |
Тип сканера |
планшетный/протяжный |
Устройство автоподачи оригиналов |
одностороннее |
Емкость устройства автоподачи оригиналов |
100 |
Глубина цвета |
30 бит |
Оттенки серого |
256 |
Макс, размер сканирования |
|
| По Y | 432 |
| По X | 297 |
Разрешение сканера |
|
| По Х | 600 |
Расходные материалы |
|
Количество картриджей |
1 |
Печать на: |
|
| Пленках |
|
| Матовой бумаге |
|
| Конвертах |
|
| Карточках |
|
| Глянцевой бумаге |
|
| Этикетках |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Максимальная | 227 |
| Минимальная | 64 |
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Беспроводная трубка |
|
Проводная трубка |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
АОН |
|
Языки управления |
|
| PCL 5e |
|
|
|
|
| PostScript |
|
| PCL 6 |
|
| PostScript 3 |
|
| PPDS |
|
| PostScript 2 |
|
| PCL 5c |
|
Лотки |
|
Подача бумаги |
|
| Стандартная | 3 100 |
| Максимальная | 3 100 |
Вывод бумаги |
|
| Стандартный | 1 000 |
Финишер |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Брошюровщик |
|
Сортер |
|
Степлер |
|
Интерфейсы |
|
USB |
|
Веб-интерфейс |
|
Ethernet (RJ-45) |
|
Количество слотов расширения |
1 |
Инфракрасный порт |
|
Bluetooth |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
LPT |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Версия USB |
2,0 |
Память/Процессор |
|
Процессор |
MIPS 20KC |
Частота процессора |
533 |
Объем памяти |
384 |
Емкость жесткого диска |
80 |
Дополнительная информация |
|
Экран |
|
Мин. системные требования |
Intel Pentium II |
Поддержка ОС |
|
| Mac OS |
|
| Linux |
|
| Windows |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 1 092 |
| В режиме ожидания | 255 |
Габариты |
|
Ширина |
1 092 |
Вес |
143 |
Высота |
838 |
Глубина |
1 219 |
Модули
ADF paper pickup assembly (2 of 2)
Print engine internal components (1 of 4)
Scanner engine PCAs
Flatbed optical assembly
Drum feed drive assembly
Print engine internal components (3 of 4)
Print engine internal components (2 of 4)
ADF optical assembly
Flatbed scanner assembly (2 of 3)
Transfer roller assembly
Print engine internal components (4 of 4)
Scanner engine covers and panels (1 of 2)
REGISTRATION ASSEMBLY
PCA locations
Print engine covers and panels
Flatbed scanner assembly (1 of 3)
Tray 2 or Tray 3 parts
ADF paper pickup assembly (1 of 2)
Scanner assembly
Paper input unit
Tray 4 PCA location
Tray 4 drive assembly
Tray 1 assembly
Tray 4 main body (2 of 2)
Right cover assembly
Left door and diverter
Scanner engine covers and panels (2 of 2)
Delivery assembly
Fuser delivery drive assembly
Tray 4 main body (1 of 2)
Flatbed scanner assembly (3 of 3)
ADF main assembly
ADF scanner assembly
Cartridge lifter assembly
Детали ADF scanner assembly
| Деталь: | Drive tension bracket |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X8 |
| Парткод: | Not orderable |
| Деталь: | CLIP |
| Парткод: | Not orderable |
| Деталь: | SPRING, TENSION |
| Парткод: | Not orderable |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2496-000CN |
| Деталь: | SOLENOID |
| Парткод: | RH7-5312-020CN |
| Деталь: | MOUNT, MOTOR |
| Парткод: | Not orderable |
| Деталь: | GEAR, 28T |
| Парткод: | Not orderable |
| Деталь: | BUSHING |
| Парткод: | Not orderable |
| Деталь: | SEPARATION ROLLER ASSEMBLY |
| Парткод: | RG5-6281-030CN |
| Деталь: | Separation shaft assembly |
| Парткод: | Not orderable |
| Деталь: | Pickup roller assembly |
| Парткод: | RG5-6283-020CN |
| Деталь: | ADF sensor cable |
| Парткод: | Not orderable |
| Деталь: | PHOTO-INTERRUPTER, TLP1241 |
| Парткод: | Not orderable |
| Деталь: | Clamp. cable |
| Парткод: | Not orderable |
| Деталь: | Pickup sensor assembly |
| Парткод: | RG5-6285-020CN |
| Деталь: | Drive motor assembly |
| Парткод: | Not orderable |
| Деталь: | Feed motor assembly |
| Парткод: | Not orderable |
| Деталь: | Flag, empty |
| Парткод: | RB27978000CN |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | LEVER, SHUTTER |
| Парткод: | Not orderable |
| Деталь: | ADF left hinge |
| Парткод: | Not orderable |
| Деталь: | Bracket, tension |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X8 |
| Парткод: | Not orderable |
| Деталь: | CLAMP |
| Парткод: | Not orderable |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1488-030CN |
| Деталь: | Roller, pickup |
| Парткод: | RB2-7961-000CN |
| Цена: | 2 600 ₽ |
| Деталь: | PHOTO-INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000CN |
| Деталь: | Plate, motor mount |
| Парткод: | Not orderable |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1487-020CN |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M3x4 |
| Парткод: | Not orderable |
| Деталь: | SHUTTER ASSEMBLY |
| Парткод: | RG5-6286-000CN |
| Деталь: | Roller delivery |
| Парткод: | RG56266000CN |
| Деталь: | Static charge eliminator |
| Парткод: | RB2-7970-000CN |
| Деталь: | Lever, open |
| Парткод: | RB2-8002-000CN |
| Деталь: | REGISTRATION ROLLER ASSEMBLY |
| Парткод: | RG5-6277-000CN |
| Деталь: | Guide, pickup |
| Парткод: | RB2-5522-000CN |
| Деталь: | GUIDE, CARTRIDGE |
| Парткод: | RB2-5526-000CN |
| Деталь: | Hinge mount, damper |
| Парткод: | RB2-5570-020CN |
| Деталь: | Hinge arm, front cover |
| Парткод: | RB2-5654-000CN |
| Деталь: | Cover, right door, inside |
| Парткод: | RB2-5697-000CN |
| Деталь: | Knob, registration, jam removal |
| Парткод: | RB2-5845-000CN |
| Деталь: | Front inside cover assembly |
| Парткод: | RG5-5721-000CN |
| Деталь: | Jam clearing assembly, fuser |
| Парткод: | RG5-5700-030CN |
| Деталь: | Lever assembly, cartridge release |
| Парткод: | RG5-5746-030CN |
| Деталь: | Foot, right side |
| Парткод: | RB1-6421-000CN |
| Деталь: | Foot, left side |
| Парткод: | RB2-5529-000CN |
| Деталь: | Guide rail, cartridge |
| Парткод: | RG5-5718-000CN |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | Screw, M3x8, RS |
| Парткод: | XA9-1500-000CN |
| Деталь: | Torque limiter, spacer |
| Парткод: | RB2-5759-000CN |
| Деталь: | ROLLER, FEED/SEPARATION |
| Парткод: | RF5-3338-000CN |
| Цена: | 400 ₽ |
| Деталь: | ROLLER, PICK |
| Парткод: | RF5-3340-000CN |
| Цена: | 290 ₽ |
| Деталь: | COLLAR |
| Парткод: | RB2-5547-000CN |
| Деталь: | Link, connect |
| Парткод: | RB2-5528-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2285-000CN |
| Деталь: | Intermediate PCA |
| Парткод: | RH5-3165-030CN |
| Деталь: | Flatbed intermediate PCA |
| Парткод: | RH5-3073-000CN |
| Деталь: | Scanner controller PCA |
| Парткод: | RH5-3075-090CN |
| Деталь: | ADF intermediate PCA |
| Парткод: | RH5-3078-030CN |
| Деталь: | ADF sensor PCA |
| Парткод: | RH5-3079-030CN |
| Деталь: | POWER SUPPLY ASSEMBLY |
| Парткод: | RG1-4153-000CN |
| Деталь: | ADF analog processor PCA |
| Парткод: | Not orderable |
| Деталь: | Inverter PCA |
| Парткод: | Not orderable |
| Деталь: | ADF width sensor assembly |
| Парткод: | RG5-6274-000CN |
| Деталь: | Cover, shield |
| Парткод: | Not orderable |
| Деталь: | Lamp assembly |
| Парткод: | Not orderable |
| Деталь: | PLATE, SHIELD |
| Парткод: | Not orderable |
| Деталь: | Holder FFC |
| Парткод: | Not orderable |
| Деталь: | Spindle |
| Парткод: | Not orderable |
| Деталь: | GUIDE, CARTRIDGE |
| Парткод: | Not orderable |
| Деталь: | Edge, cable |
| Парткод: | Not orderable |
| Деталь: | FERRITE CORE |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M4x6 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X12 |
| Парткод: | Not orderable |
| Деталь: | CLAMP, CABLE |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M3x12 |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M3x6 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | Plate, shading |
| Парткод: | Not orderable |
| Деталь: | Flatbed sub frame assembly |
| Парткод: | Not orderable |
| Деталь: | Flatbed lamp assembly |
| Парткод: | Not orderable |
| Деталь: | CLIP, CABLE |
| Парткод: | Not orderable |
| Деталь: | CCD lens assembly |
| Парткод: | Not orderable |
| Деталь: | Lamp |
| Парткод: | Not orderable |
| Деталь: | Flatbed analog processor |
| Парткод: | Not orderable |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | CABLE, CCD |
| Парткод: | Not orderable |
| Деталь: | Cable, flatbed |
| Парткод: | Not orderable |
| Деталь: | CABLE, POWER |
| Парткод: | Not orderable |
| Деталь: | Inverter PCA |
| Парткод: | Not orderable |
| Деталь: | Cover, lens |
| Парткод: | Not orderable |
| Деталь: | CABLE, SCANNER |
| Парткод: | Not orderable |
| Деталь: | Cable, lamp |
| Парткод: | Not orderable |
| Деталь: | BUSHING |
| Парткод: | Not orderable |
| Деталь: | BLOCK, SLIDE |
| Парткод: | Not orderable |
| Деталь: | SHEET, COVER |
| Парткод: | Not orderable |
| Деталь: | Flatbed optical assembly |
| Парткод: | RG5-6263-070CN |
| Деталь: | Main motor (M2) |
| Парткод: | RH7-1656-000CN |
| Деталь: | SCREW, M3X6 |
| Парткод: | XA9-1495-000CN |
| Деталь: | Drum feed drive assembly |
| Парткод: | RG5-5656-080CN |
| Цена: | 12 400 ₽ |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | Screw, M3x8, RS |
| Парткод: | XA9-1500-000CN |
| Деталь: | Latch mount assembly |
| Парткод: | RG5-5704-040CN |
| Деталь: | End paper sensor assembly |
| Парткод: | RG5-5699-040CN |
| Деталь: | Upper cable guide assembly |
| Парткод: | RG5-7787-000CN |
| Деталь: | Fan, 5, cartridge fan |
| Парткод: | RH7-5306-000CN |
| Деталь: | Right rail assembly |
| Парткод: | RG5-5715-030CN |
| Деталь: | Cartridge, front pressure assembly |
| Парткод: | RG5-5709-000CN |
| Деталь: | Cartridge, back pressure assembly |
| Парткод: | RG5-5710-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS6-2302-000CN |
| Деталь: | Laser/Scanner assembly |
| Парткод: | RG5-5826-090CN |
| Цена: | 29 200 ₽ |
| Деталь: | Rod, switch, ON/OFF |
| Парткод: | RB2-5661-000CN |
| Деталь: | Left rail, upper |
| Парткод: | RG5-5713-020CN |
| Деталь: | Left rail, lower |
| Парткод: | RG5-5714-020CN |
| Деталь: | Front fusing mount |
| Парткод: | RB2-5517-020CN |
| Деталь: | Front fusing rail |
| Парткод: | RB2-5515-000CN |
| Деталь: | Back fusing rail |
| Парткод: | RB2-5516-000CN |
| Деталь: | Back fusing mount |
| Парткод: | RB2-5518-020CN |
| Деталь: | SPRING, LEAF |
| Парткод: | RB2-5523-000CN |
| Деталь: | SCREW, M3X6 |
| Парткод: | XA9-1495-000CN |
| Деталь: | Fuser connector holder assembly |
| Парткод: | RG5-5724-050CN |
| Деталь: | Fuser power cable |
| Парткод: | RG5-8025-000CN |
| Деталь: | GEAR, 21T |
| Парткод: | RS5-0708-000CN |
| Деталь: | Fuser high-voltage cable |
| Парткод: | RG5-8034-000CN |
| Деталь: | Feed guide, transfer |
| Парткод: | RG5-5651-030CN |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | Screw, M3x8, RS |
| Парткод: | XA9-1500-000CN |
| Деталь: | Fuser assembly, 110 V |
| Парткод: | RG5-5750-270CN |
| Деталь: | Fuser assembly, 220 V |
| Парткод: | RG5-5751-270CN (220V) |
| Деталь: | SCREW, M3X8 |
| Парткод: | XA9-1500-000CN |
| Деталь: | Toner contact assembly |
| Парткод: | RG5-5717-020CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2299-000CN |
| Деталь: | ARM, SHUTTER |
| Парткод: | RB2-5639-000CN |
| Деталь: | SHUTTER, LASER |
| Парткод: | RB2-5640-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2296-000CN |
| Деталь: | Sheet, front |
| Парткод: | Not orderable |
| Деталь: | Sheet, rear |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M4x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M3x12 |
| Парткод: | Not orderable |
| Деталь: | Damper sheet |
| Парткод: | Not orderable |
| Деталь: | Cover, unit |
| Парткод: | Not orderable |
| Деталь: | ADF scanner assembly chassis |
| Парткод: | Not orderable |
| Деталь: | ADF shield box assembly |
| Парткод: | Not orderable |
| Деталь: | ADF Lens assembly |
| Парткод: | Not orderable |
| Деталь: | Plate, shading |
| Парткод: | Not orderable |
| Деталь: | Lamp |
| Парткод: | Not orderable |
| Деталь: | Cover, lens |
| Парткод: | Not orderable |
| Деталь: | Plate, heat sink |
| Парткод: | Not orderable |
| Деталь: | ADF lamp assembly |
| Парткод: | Not orderable |
| Деталь: | CABLE, CCD |
| Парткод: | Not orderable |
| Деталь: | Inverter PCA |
| Парткод: | Not orderable |
| Деталь: | ADF analog processor PCA |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M3x6 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X8 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Cable, ADF inverter |
| Парткод: | Not orderable |
| Деталь: | Flip-down glass assembly |
| Парткод: | Not orderable |
| Деталь: | PLATE, GLASS |
| Парткод: | Not orderable |
| Деталь: | ADF optical assembly |
| Парткод: | RG5-6307-020CN |
| Деталь: | COVER, FRONT LOWER |
| Парткод: | RB2-7933-000CN |
| Деталь: | COVER, FRONT UPPER |
| Парткод: | RB2-7934-000CN |
| Деталь: | Cover, glass mount |
| Парткод: | RB2-7935-000CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RB2-8063-000CN |
| Деталь: | SCREW |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | Pivot, positioning |
| Парткод: | Not orderable |
| Деталь: | Mount, glass 3 |
| Парткод: | RB2-7927-000CN |
| Деталь: | Mount, glass 13 |
| Парткод: | RB2-7928-000CN |
| Деталь: | Reinforcement plate assembly |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X5 |
| Парткод: | Not orderable |
| Деталь: | Plate, base |
| Парткод: | Not orderable |
| Деталь: | COPYBOARD GLASS UNIT |
| Парткод: | RF5-3676-000CN |
| Деталь: | Screw, TP M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | POWER SUPPLY ASSEMBLY |
| Парткод: | RG1-4153-000CN |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1485-000CN |
| Деталь: | Left hinge assembly |
| Парткод: | Not orderable |
| Деталь: | Cable, guide assembly |
| Парткод: | Not orderable |
| Деталь: | Motor bracket assembly |
| Парткод: | Not orderable |
| Деталь: | Scanner controller cable |
| Парткод: | RG5-6257-000CN |
| Деталь: | Sensor crossmember assembly |
| Парткод: | RG5-6258-000CN |
| Деталь: | Plate, slide shaft |
| Парткод: | RB2-7920-000CN |
| Деталь: | Flatbed sensor assembly |
| Парткод: | RG5-7806-000CN |
| Деталь: | Intermediate PCA case |
| Парткод: | Not orderable |
| Деталь: | Delivery roller assembly |
| Парткод: | RG5-6266-000CN |
| Деталь: | Ground cable |
| Парткод: | Not orderable |
| Деталь: | Cartridge drive assembly |
| Парткод: | Not orderable |
| Деталь: | FAN ASSEMBLY |
| Парткод: | RG5-6318-000CN |
| Деталь: | CABLE, FAN |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X6 |
| Парткод: | Not orderable |
| Деталь: | Flatbed intermediate PCA |
| Парткод: | RH5-3073-030CN |
| Деталь: | Scanner motor cable |
| Парткод: | Not orderable |
| Деталь: | DC controller cable |
| Парткод: | Not orderable |
| Деталь: | Scanner controller PCA |
| Парткод: | RH5-3075-090CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS6-2492-020CN |
| Деталь: | Label, adjustment |
| Парткод: | Not orderable |
| Деталь: | Lower delivery roller |
| Парткод: | RB2-7884-000CN |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | GUIDE, SLIDE |
| Парткод: | Not orderable |
| Деталь: | PLATE, WIDTH INDEX |
| Парткод: | Not orderable |
| Деталь: | Fuse, 250V, 5A |
| Парткод: | VD7-0645-001CN |
| Деталь: | Sensor, document size |
| Парткод: | Not orderable |
| Деталь: | Photo interrupter, TLP1241 |
| Парткод: | Not orderable |
| Деталь: | Intermediate PCA |
| Парткод: | RH5-7807-000CN |
| Деталь: | FAN |
| Парткод: | Not orderable |
| Деталь: | Holder, transfer |
| Парткод: | RG5-5653-030CN |
| Деталь: | ROLLER, TRANSFER |
| Парткод: | RF5-3319-000CN |
| Деталь: | Guide, transfer/pre-transfer |
| Парткод: | RG5-5654-000CN |
| Деталь: | Transfer roller assembly |
| Парткод: | RG5-5662-050CN |
| Деталь: | Low voltage power supply assembly 110 V |
| Парткод: | RG5-7778-030CN |
| Деталь: | Low voltage power supply assembly 220 V |
| Парткод: | RG5-7779-030CN (220V) |
| Деталь: | Cable, HVPS flat ribbon |
| Парткод: | RH2-5445-000CN |
| Деталь: | Fan, 1, power supply |
| Парткод: | RH7-1657-000CN |
| Деталь: | Fan, 2, controller |
| Парткод: | RH7-1623-000CN |
| Деталь: | Back cable holder assembly |
| Парткод: | RG5-7786-000CN |
| Деталь: | Fan connecting cable |
| Парткод: | RG5-7783-000CN |
| Деталь: | Inlet assembly (Power SW 10) |
| Парткод: | RG5-5727-030CN |
| Деталь: | High voltage power supply (HVPS) |
| Парткод: | RG5-5728-100CN |
| Деталь: | Connector assembly |
| Парткод: | RG5-5779-030CN |
| Деталь: | Toner sensor contact with memory (antenna) |
| Парткод: | RG5-5719-100CN |
| Деталь: | Main cable harness assembly |
| Парткод: | RG5-5722-030CN |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | Screw, M3x8, RS |
| Парткод: | XA9-1500-000CN |
| Деталь: | Screw, stepped M4x3.2 |
| Парткод: | Not orderable |
| Деталь: | Plate, crossmember |
| Парткод: | Not orderable |
| Деталь: | Bracket, mount |
| Парткод: | Not orderable |
| Деталь: | Delivery tray assembly |
| Парткод: | RG5-6316-000CN |
| Деталь: | Plate, cover upper |
| Парткод: | Not orderable |
| Деталь: | COVER, LEFT |
| Парткод: | RB2-8054-000CN |
| Деталь: | Plate, protect |
| Парткод: | Not orderable |
| Деталь: | REAR COVER ASSEMBLY |
| Парткод: | Not orderable |
| Деталь: | Plate, rear sub |
| Парткод: | Not orderable |
| Деталь: | COVER, CONNECTOR |
| Парткод: | RB2-8060-000CN |
| Деталь: | SCREW, M3X5 |
| Парткод: | Not orderable |
| Деталь: | Guide, delivery unit |
| Парткод: | RF5-3674-000CN |
| Деталь: | Cover, copyboard unit |
| Парткод: | RF5-3695-000CN |
| Деталь: | LABEL, JAM CLEARING |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M4x8 |
| Парткод: | Not orderable |
| Деталь: | ADF rear cover assembly |
| Парткод: | RG5-6315-000CN |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | Holder, document stop |
| Парткод: | Not orderable |
| Деталь: | Hinge cover assembly |
| Парткод: | RG5-6317-000CN |
| Деталь: | REGISTRATION ASSEMBLY |
| Парткод: | RG5-5663-060CN |
| Цена: | 19 900 ₽ |
| Деталь: | DC controller PCA |
| Парткод: | RG5-7780-060CN |
| Деталь: | Delivery PCA |
| Парткод: | RG5-8013-000CN |
| Деталь: | Print cartridge memory controller PCA |
| Парткод: | RG5-8009-000CN |
| Цена: | 5 300 ₽ |
| Деталь: | Paper pickup (PIU) PCA |
| Парткод: | RG5-7896-000CN |
| Деталь: | Cap, right cover |
| Парткод: | RB2-5675-000CN |
| Деталь: | Cover, tray 1 blanking |
| Парткод: | RB2-5676-000CN |
| Деталь: | COVER, RIGHT RAIL |
| Парткод: | RB2-5682-000CN |
| Деталь: | Cover, left rail |
| Парткод: | RB2-5683-000CN |
| Деталь: | Cover, right back |
| Парткод: | RB2-5684-000CN |
| Деталь: | Cover, left back |
| Парткод: | RB2-5687-000CN |
| Деталь: | COVER, LEFT LOWER |
| Парткод: | RB2-5687-000CN |
| Деталь: | COVER, RIGHT LOWER |
| Парткод: | RB2-5689-000CN |
| Деталь: | TRAY, FACE-UP |
| Парткод: | RB2-5690-000CN |
| Цена: | 2 200 ₽ |
| Деталь: | Back cover assembly |
| Парткод: | RG5-5701-000CN |
| Деталь: | FRONT COVER ASSEMBLY |
| Парткод: | RG5-5702-050CN |
| Деталь: | Left upper cover assembly |
| Парткод: | RG5-5705-030CN |
| Деталь: | Tape, cover (retaining strap) |
| Парткод: | RB25653000CN |
| Деталь: | Strap, rock block, retaining clip |
| Парткод: | RB2-5655-000CN |
| Деталь: | PIN |
| Парткод: | RB2-5656-000CN |
| Деталь: | BUSHING |
| Парткод: | RB2-5652-000CN |
| Деталь: | Latch, roller-action |
| Парткод: | RB2-5700-000CN |
| Деталь: | COVER, LEFT UPPER |
| Парткод: | RB2-6491-000CN |
| Деталь: | Plate, lock, right side |
| Парткод: | RB2-5679-000CN |
| Деталь: | COVER, FRONT LOWER |
| Парткод: | RB2-7933-000CN |
| Деталь: | COVER, FRONT UPPER |
| Парткод: | RB2-7934-000CN |
| Деталь: | Cover, glass mount |
| Парткод: | RB2-7935-000CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RB2-8063-000CN |
| Деталь: | SCREW |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | Pivot, positioning |
| Парткод: | Not orderable |
| Деталь: | Mount, glass 3 |
| Парткод: | RB2-7927-000CN |
| Деталь: | Mount, glass 13 |
| Парткод: | RB2-7928-000CN |
| Деталь: | Reinforcement plate assembly |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X5 |
| Парткод: | Not orderable |
| Деталь: | Plate, base |
| Парткод: | Not orderable |
| Деталь: | COPYBOARD GLASS UNIT |
| Парткод: | RF5-3676-000CN |
| Деталь: | Screw, TP M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | POWER SUPPLY ASSEMBLY |
| Парткод: | RG1-4153-000CN |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1485-000CN |
| Деталь: | Left hinge assembly |
| Парткод: | Not orderable |
| Деталь: | Cable, guide assembly |
| Парткод: | Not orderable |
| Деталь: | Motor bracket assembly |
| Парткод: | Not orderable |
| Деталь: | Scanner controller cable |
| Парткод: | RG5-6257-000CN |
| Деталь: | Sensor crossmember assembly |
| Парткод: | RG5-6258-000CN |
| Деталь: | Plate, slide shaft |
| Парткод: | RB2-7920-000CN |
| Деталь: | Flatbed sensor assembly |
| Парткод: | RG5-7806-000CN |
| Деталь: | Intermediate PCA case |
| Парткод: | Not orderable |
| Деталь: | Delivery roller assembly |
| Парткод: | RG5-6266-000CN |
| Деталь: | Ground cable |
| Парткод: | Not orderable |
| Деталь: | Cartridge drive assembly |
| Парткод: | Not orderable |
| Деталь: | FAN ASSEMBLY |
| Парткод: | RG5-6318-000CN |
| Деталь: | CABLE, FAN |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X6 |
| Парткод: | Not orderable |
| Деталь: | Flatbed intermediate PCA |
| Парткод: | RH5-3073-030CN |
| Деталь: | Scanner motor cable |
| Парткод: | Not orderable |
| Деталь: | DC controller cable |
| Парткод: | Not orderable |
| Деталь: | Scanner controller PCA |
| Парткод: | RH5-3075-090CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS6-2492-020CN |
| Деталь: | Label, adjustment |
| Парткод: | Not orderable |
| Деталь: | Lower delivery roller |
| Парткод: | RB2-7884-000CN |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | GUIDE, SLIDE |
| Парткод: | Not orderable |
| Деталь: | PLATE, WIDTH INDEX |
| Парткод: | Not orderable |
| Деталь: | Fuse, 250V, 5A |
| Парткод: | VD7-0645-001CN |
| Деталь: | Sensor, document size |
| Парткод: | Not orderable |
| Деталь: | Photo interrupter, TLP1241 |
| Парткод: | Not orderable |
| Деталь: | Intermediate PCA |
| Парткод: | RH5-7807-000CN |
| Деталь: | FAN |
| Парткод: | Not orderable |
| Деталь: | Custom/standard switch |
| Парткод: | RB2-5813-000CN |
| Деталь: | SPRING, TORSION |
| Парткод: | RB2-5816-000CN |
| Деталь: | Screw, W/W, M3x29.5 |
| Парткод: | XA9-1466-000CN |
| Деталь: | 500-sheet trays |
| Парткод: | RG5-5635-110CN |
| Цена: | 9 000 ₽ |
| Деталь: | Drive tension bracket |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X8 |
| Парткод: | Not orderable |
| Деталь: | CLIP |
| Парткод: | Not orderable |
| Деталь: | SPRING, TENSION |
| Парткод: | Not orderable |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2496-000CN |
| Деталь: | SOLENOID |
| Парткод: | RH7-5312-020CN |
| Деталь: | MOUNT, MOTOR |
| Парткод: | Not orderable |
| Деталь: | GEAR, 28T |
| Парткод: | Not orderable |
| Деталь: | BUSHING |
| Парткод: | Not orderable |
| Деталь: | SEPARATION ROLLER ASSEMBLY |
| Парткод: | RG5-6281-030CN |
| Деталь: | Separation shaft assembly |
| Парткод: | Not orderable |
| Деталь: | Pickup roller assembly |
| Парткод: | RG5-6283-020CN |
| Деталь: | ADF sensor cable |
| Парткод: | Not orderable |
| Деталь: | PHOTO-INTERRUPTER, TLP1241 |
| Парткод: | Not orderable |
| Деталь: | Clamp. cable |
| Парткод: | Not orderable |
| Деталь: | Pickup sensor assembly |
| Парткод: | RG5-6285-020CN |
| Деталь: | Drive motor assembly |
| Парткод: | Not orderable |
| Деталь: | Feed motor assembly |
| Парткод: | Not orderable |
| Деталь: | Flag, empty |
| Парткод: | RB27978000CN |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | LEVER, SHUTTER |
| Парткод: | Not orderable |
| Деталь: | ADF left hinge |
| Парткод: | Not orderable |
| Деталь: | Bracket, tension |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X8 |
| Парткод: | Not orderable |
| Деталь: | CLAMP |
| Парткод: | Not orderable |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1488-030CN |
| Деталь: | Roller, pickup |
| Парткод: | RB2-7961-000CN |
| Цена: | 2 600 ₽ |
| Деталь: | PHOTO-INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000CN |
| Деталь: | Plate, motor mount |
| Парткод: | Not orderable |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1487-020CN |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M3x4 |
| Парткод: | Not orderable |
| Деталь: | SHUTTER ASSEMBLY |
| Парткод: | RG5-6286-000CN |
| Деталь: | Roller delivery |
| Парткод: | RG56266000CN |
| Деталь: | Static charge eliminator |
| Парткод: | RB2-7970-000CN |
| Деталь: | Lever, open |
| Парткод: | RB2-8002-000CN |
| Деталь: | REGISTRATION ROLLER ASSEMBLY |
| Парткод: | RG5-6277-000CN |
| Деталь: | Left upper cover assembly |
| Парткод: | RG5-5706-000CN |
| Деталь: | Control panel cable |
| Парткод: | RG5-5752-000CN |
| Деталь: | Grounding cable |
| Парткод: | RG5-5736-000CN |
| Деталь: | Power supply cable |
| Парткод: | RG5-5735-000CN |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | CC395-60102 |
| Деталь: | Holder lock |
| Парткод: | RB2-6495-000CN |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | Paper pickup PCA |
| Парткод: | RG5-7896-000CN |
| Деталь: | Paper input unit |
| Парткод: | RG5-5681-090CN |
| Деталь: | Paper size PCA |
| Парткод: | RG5-6238-020CN |
| Деталь: | Paper volume PCA |
| Парткод: | RG5-6237-020CN |
| Деталь: | Deck controller PCA |
| Парткод: | RG5-6235-150CN |
| Деталь: | LED PCA |
| Парткод: | RG5-6239-020CN |
| Деталь: | MOTOR |
| Парткод: | RH7-1481-020CN |
| Деталь: | Screw, M3x6 with washer |
| Парткод: | XB2-6300-180CN |
| Деталь: | Tray 4 deck drive assembly |
| Парткод: | RG5-6228-060CN |
| Деталь: | Tray assembly |
| Парткод: | RG5-5809-060CN |
| Деталь: | Service cover assembly |
| Парткод: | RG5-5811-040CN |
| Деталь: | Roller, pickup |
| Парткод: | RF5-3403-000CN |
| Цена: | 1 200 ₽ |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | RF5-3404-000CN |
| Цена: | 1 300 ₽ |
| Деталь: | Cover hooks |
| Парткод: | RB2-6537-000CN |
| Деталь: | Tray 1 |
| Парткод: | C8568-67902 |
| Деталь: | Caster, back |
| Парткод: | RB2-7678-030CN |
| Деталь: | Caster, front swivel |
| Парткод: | RB3-0304-050CN |
| Деталь: | Screw, M5x12 |
| Парткод: | XA9-0912-000CN |
| Деталь: | Switch assembly (SW21) |
| Парткод: | RG5-6206-030CN |
| Деталь: | Paper size sensing assembly |
| Парткод: | RG5-6207-060CN |
| Деталь: | Screw, M4x8, RS |
| Парткод: | XA9-0732-000CN |
| Деталь: | Paper volume sensing assembly |
| Парткод: | RG5-6229-040CN |
| Деталь: | SCREW, M4X6 |
| Парткод: | XA9-0994-000CN |
| Деталь: | POWER SUPPLY |
| Парткод: | RG5-6250-040CN |
| Деталь: | Jet-Link cable holder assembly (see 10a, 10b, and 10c) |
| Парткод: | N/A |
| Деталь: | HOLDER |
| Парткод: | RB2-7662-020CN |
| Деталь: | Cable assembly |
| Парткод: | RG5-6240-020CN |
| Деталь: | Grounding cable |
| Парткод: | RG5-6249-000CN |
| Деталь: | Right cover knob assembly |
| Парткод: | RG5-5740-020CN |
| Деталь: | Cable, tray 1 |
| Парткод: | RG5-8038-000CN |
| Деталь: | Grounding cable, tray 1 |
| Парткод: | RG5-5764-000CN |
| Деталь: | SCREW, M3X8 |
| Парткод: | XA9-1200-000CN |
| Деталь: | Tape, cover (restraining strap) |
| Парткод: | RB2-5653-000CN |
| Деталь: | Screw, M3x8, RS |
| Парткод: | XA9-1500-000CN |
| Деталь: | RIGHT COVER ASSEMBLY |
| Парткод: | RG5-5737-090CN |
| Цена: | 9 200 ₽ |
| Деталь: | Diverter assembly |
| Парткод: | RG5-5647-070CN |
| Деталь: | DAMPER ASSEMBLY |
| Парткод: | RG5-5648-020CN |
| Деталь: | SCREW, M4X10 |
| Парткод: | XB4-5401-009CN |
| Деталь: | Cover, left (left door) |
| Парткод: | RB2-6007-000CN |
| Деталь: | Left door and diverter |
| Парткод: | RG5-5646-070CN |
| Деталь: | Screw, stepped M4x3.2 |
| Парткод: | Not orderable |
| Деталь: | Plate, crossmember |
| Парткод: | Not orderable |
| Деталь: | Bracket, mount |
| Парткод: | Not orderable |
| Деталь: | Delivery tray assembly |
| Парткод: | RG5-6316-000CN |
| Деталь: | Plate, cover upper |
| Парткод: | Not orderable |
| Деталь: | COVER, LEFT |
| Парткод: | RB2-8054-000CN |
| Деталь: | Plate, protect |
| Парткод: | Not orderable |
| Деталь: | REAR COVER ASSEMBLY |
| Парткод: | Not orderable |
| Деталь: | Plate, rear sub |
| Парткод: | Not orderable |
| Деталь: | COVER, CONNECTOR |
| Парткод: | RB2-8060-000CN |
| Деталь: | SCREW, M3X5 |
| Парткод: | Not orderable |
| Деталь: | Guide, delivery unit |
| Парткод: | RF5-3674-000CN |
| Деталь: | Cover, copyboard unit |
| Парткод: | RF5-3695-000CN |
| Деталь: | LABEL, JAM CLEARING |
| Парткод: | Not orderable |
| Деталь: | Screw, TP M4x8 |
| Парткод: | Not orderable |
| Деталь: | ADF rear cover assembly |
| Парткод: | RG5-6315-000CN |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | Holder, document stop |
| Парткод: | Not orderable |
| Деталь: | Hinge cover assembly |
| Парткод: | RG5-6317-000CN |
| Деталь: | Flapper can |
| Парткод: | RB2-6494-000CN |
| Деталь: | FAN |
| Парткод: | RH71658000CN |
| Деталь: | Fan cover |
| Парткод: | RB2-6490-000CN |
| Деталь: | M3x6 RS screw |
| Парткод: | XA9-1500-000CN |
| Деталь: | Left cross member assembly |
| Парткод: | RG55641000CN |
| Деталь: | 29T gear |
| Парткод: | Not orderable |
| Деталь: | Face down frame |
| Парткод: | Not orderable |
| Деталь: | Fan holder |
| Парткод: | Not orderable |
| Деталь: | Left upper cross member |
| Парткод: | Not orderable |
| Деталь: | 55T gear |
| Парткод: | Not orderable |
| Деталь: | 57T gear |
| Парткод: | Not orderable |
| Деталь: | Drive plate |
| Парткод: | Not orderable |
| Деталь: | CABLE CLIP |
| Парткод: | Not orderable |
| Деталь: | E RING |
| Парткод: | Not orderable |
| Деталь: | B damper |
| Парткод: | Not orderable |
| Деталь: | SPACER |
| Парткод: | Not orderable |
| Деталь: | Upper spacer |
| Парткод: | Not orderable |
| Деталь: | 3P connector |
| Парткод: | Not orderable |
| Деталь: | M3x6 RS screw |
| Парткод: | Not orderable |
| Деталь: | DELIVERY ASSEMBLY |
| Парткод: | RG5-5642-040CN |
| Деталь: | Screw, M3x6, RS |
| Парткод: | XA9-1495-000CN |
| Деталь: | LEVER, SWITCH |
| Парткод: | RB2-6077-000CN |
| Деталь: | Motor, DC, 24V (M1) |
| Парткод: | RH7-1622-000CN |
| Деталь: | Microswitch (SW1) |
| Парткод: | WC4-5136-000CN |
| Цена: | 600 ₽ |
| Деталь: | Fuser delivery drive assembly |
| Парткод: | RG5-7789-050CN |
| Деталь: | COVER, FRONT |
| Парткод: | RB2-7648-040CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RB2-7649-000CN |
| Деталь: | Cover, right back |
| Парткод: | RB2-7650-000CN |
| Деталь: | Cover, left back |
| Парткод: | RB2-7651-000CN |
| Деталь: | Cover, center |
| Парткод: | RB2-7652-000CN |
| Деталь: | COVER, BACK |
| Парткод: | RF5-3644-020CN |
| Деталь: | COVER, LEFT |
| Парткод: | RF5-3645-000CN |
| Деталь: | SCREW, STEPPED |
| Парткод: | RS5-9099-000CN |
| Деталь: | Screw, W/W, M4x6 |
| Парткод: | XA9-0499-000CN |
| Деталь: | SCREW, M4X6 |
| Парткод: | XB6-7400-000CN |
| Деталь: | Paper path connection unit (PPCU) |
| Парткод: | RG5-6227-040CN |
| Деталь: | Paper input unit (PIU) |
| Парткод: | RG5-6208-180CN |
| Деталь: | Feed/separation rollers |
| Парткод: | RF5-3338-000CN |
| Цена: | 400 ₽ |
| Деталь: | Tray 4 vertical registration assembly (VTU/ VRA) |
| Парткод: | RG5-6225-100CN |
| Деталь: | Tray 4 |
| Парткод: | C853167908 |
| Деталь: | Lever, standard/custom |
| Парткод: | RB2-7762-020CN |
| Деталь: | CASTER |
| Парткод: | RB2-7709-020CN |
| Деталь: | SCREW, M4X8 |
| Парткод: | XA9-1300-000CN |
| Деталь: | Tray 4-to-engine stabilizing screws |
| Парткод: | 0515-4318 |
| Деталь: | COVER, FRONT LOWER |
| Парткод: | RB2-7933-000CN |
| Деталь: | COVER, FRONT UPPER |
| Парткод: | RB2-7934-000CN |
| Деталь: | Cover, glass mount |
| Парткод: | RB2-7935-000CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RB2-8063-000CN |
| Деталь: | SCREW |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | Pivot, positioning |
| Парткод: | Not orderable |
| Деталь: | Mount, glass 3 |
| Парткод: | RB2-7927-000CN |
| Деталь: | Mount, glass 13 |
| Парткод: | RB2-7928-000CN |
| Деталь: | Reinforcement plate assembly |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X5 |
| Парткод: | Not orderable |
| Деталь: | Plate, base |
| Парткод: | Not orderable |
| Деталь: | COPYBOARD GLASS UNIT |
| Парткод: | RF5-3676-000CN |
| Деталь: | Screw, TP M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | POWER SUPPLY ASSEMBLY |
| Парткод: | RG1-4153-000CN |
| Деталь: | Motor, 24vdc |
| Парткод: | RH7-1485-000CN |
| Деталь: | Left hinge assembly |
| Парткод: | Not orderable |
| Деталь: | Cable, guide assembly |
| Парткод: | Not orderable |
| Деталь: | Motor bracket assembly |
| Парткод: | Not orderable |
| Деталь: | Scanner controller cable |
| Парткод: | RG5-6257-000CN |
| Деталь: | Sensor crossmember assembly |
| Парткод: | RG5-6258-000CN |
| Деталь: | Plate, slide shaft |
| Парткод: | RB2-7920-000CN |
| Деталь: | Flatbed sensor assembly |
| Парткод: | RG5-7806-000CN |
| Деталь: | Intermediate PCA case |
| Парткод: | Not orderable |
| Деталь: | Delivery roller assembly |
| Парткод: | RG5-6266-000CN |
| Деталь: | Ground cable |
| Парткод: | Not orderable |
| Деталь: | Cartridge drive assembly |
| Парткод: | Not orderable |
| Деталь: | FAN ASSEMBLY |
| Парткод: | RG5-6318-000CN |
| Деталь: | CABLE, FAN |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X6 |
| Парткод: | Not orderable |
| Деталь: | Flatbed intermediate PCA |
| Парткод: | RH5-3073-030CN |
| Деталь: | Scanner motor cable |
| Парткод: | Not orderable |
| Деталь: | DC controller cable |
| Парткод: | Not orderable |
| Деталь: | Scanner controller PCA |
| Парткод: | RH5-3075-090CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS6-2492-020CN |
| Деталь: | Label, adjustment |
| Парткод: | Not orderable |
| Деталь: | Lower delivery roller |
| Парткод: | RB2-7884-000CN |
| Деталь: | BELT, TIMING |
| Парткод: | Not orderable |
| Деталь: | GUIDE, SLIDE |
| Парткод: | Not orderable |
| Деталь: | PLATE, WIDTH INDEX |
| Парткод: | Not orderable |
| Деталь: | Fuse, 250V, 5A |
| Парткод: | VD7-0645-001CN |
| Деталь: | Sensor, document size |
| Парткод: | Not orderable |
| Деталь: | Photo interrupter, TLP1241 |
| Парткод: | Not orderable |
| Деталь: | Intermediate PCA |
| Парткод: | RH5-7807-000CN |
| Деталь: | FAN |
| Парткод: | Not orderable |
| Деталь: | SHAFT, SUPPORT |
| Парткод: | Not orderable |
| Деталь: | SPRING, TORSION |
| Парткод: | Not orderable |
| Деталь: | COVER, CABLE |
| Парткод: | RB2-8031-000CN |
| Деталь: | PIN |
| Парткод: | Not orderable |
| Деталь: | SPRING, LEAF |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X6 |
| Парткод: | Not orderable |
| Деталь: | Ring, stop |
| Парткод: | Not orderable |
| Деталь: | BUSHING |
| Парткод: | Not orderable |
| Деталь: | COLLAR |
| Парткод: | Not orderable |
| Деталь: | CLIP |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M4x6 |
| Парткод: | Not orderable |
| Деталь: | GEAR, 50T |
| Парткод: | Not orderable |
| Деталь: | SCREW, M3X8 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | PIN, SPRING |
| Парткод: | Not orderable |
| Деталь: | Cartridge frame assembly |
| Парткод: | Not orderable |
| Деталь: | CLAMP, CABLE |
| Парткод: | Not orderable |
| Деталь: | Registration guide assembly |
| Парткод: | RG5-6304-040CN |
| Деталь: | REGISTRATION SENSOR HOLDER ASSY |
| Парткод: | RG5-6305-000CN |
| Деталь: | Timing sensor holder assembly |
| Парткод: | RG5-6306-020CN |
| Деталь: | ADF sensor PCA |
| Парткод: | RH5-3079-030CN |
| Деталь: | Lever, knob |
| Парткод: | RB2-8017-000CN |
| Деталь: | KNOB |
| Парткод: | RB2-8015-000CN |
| Деталь: | Shaft, knob |
| Парткод: | RB2-8016-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RS6-2503-000CN |
| Деталь: | Gear damper unit |
| Парткод: | Not orderable |
| Деталь: | Guide, edge |
| Парткод: | Not orderable |
| Деталь: | GUIDE, CABLE |
| Парткод: | Not orderable |
| Деталь: | Grounding cable |
| Парткод: | Not orderable |
| Деталь: | ADF optical assembly |
| Парткод: | RG5-6307-020CN |
| Деталь: | ADF main assembly |
| Парткод: | RG5-7379-040CN |
| Деталь: | PLATE, SUPPORT |
| Парткод: | Not orderable |
| Деталь: | Guide, harness 1 |
| Парткод: | Not orderable |
| Деталь: | Guide, harness 2 |
| Парткод: | Not orderable |
| Деталь: | Cover, jam |
| Парткод: | RB2-8040-000CN |
| Деталь: | Guide, I/F 1 |
| Парткод: | RB2-8046-000CN |
| Деталь: | Guide, I/F 4 |
| Парткод: | RB2-8047-000CN |
| Деталь: | COVER, FRONT |
| Парткод: | RB2-8048-000CN |
| Деталь: | COVER, FRONT |
| Парткод: | Not orderable |
| Деталь: | Screw, stepped M4x12 |
| Парткод: | Not orderable |
| Деталь: | FERRITE CORE |
| Парткод: | RB2-8678-000CN |
| Деталь: | Guide, I/F 5 |
| Парткод: | RB2-8681-000CN |
| Деталь: | Guide, I/F 6 |
| Парткод: | RB2-8682-000CN |
| Деталь: | GUIDE, HARNESS |
| Парткод: | Not orderable |
| Деталь: | Screw, w/washer M4x6 |
| Парткод: | Not orderable |
| Деталь: | Holder, stop |
| Парткод: | RB2-8693-000CN |
| Деталь: | CUSHION |
| Парткод: | Not orderable |
| Деталь: | Cover, lamp right |
| Парткод: | RF5-3850-000CN |
| Деталь: | Processing PCA cable |
| Парткод: | RH2-5456-000CN |
| Деталь: | CLAMP, CABLE |
| Парткод: | Not orderable |
| Деталь: | SCREW, M4X10 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3x6 |
| Парткод: | Not orderable |
| Деталь: | Screw, RS M3X8 |
| Парткод: | Not orderable |
| Деталь: | Base, cover assembly |
| Парткод: | RG5-6272-050CN |
| Деталь: | Back cover assembly |
| Парткод: | Not orderable |
| Деталь: | ADF width sensor assembly |
| Парткод: | RG5-6274-000CN |
| Деталь: | ADF intermediate PCA |
| Парткод: | RH5-3078-030CN |
| Деталь: | ADF sensor cable |
| Парткод: | Not orderable |
| Деталь: | Cable, guide assembly |
| Парткод: | RG5-6311-000CN |
| Деталь: | ADF fan assembly |
| Парткод: | RG5-6312-030CN |
| Деталь: | I/F cable guide assembly |
| Парткод: | RG5-6313-030CN |
| Деталь: | LEVER, SENSOR |
| Парткод: | RB2-7943-000CN |
| Деталь: | PHOTO-INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000CN |
| Деталь: | Guide, rear tray |
| Парткод: | RF5-3682-000CN |
| Деталь: | Guide, front tray |
| Парткод: | RF5-3698-000CN |
| Деталь: | Tray, rack |
| Парткод: | RB2-7939-000CN |
| Деталь: | ADF right hinge |
| Парткод: | RB2-7974-000CN |
| Деталь: | ADF solenoid cable |
| Парткод: | Not orderable |
| Деталь: | FAN |
| Парткод: | RH7-1486-020CN |
| Деталь: | RS6-2298-020CN |
| Парткод: | Spring, tension |
| Деталь: | XA9-1495-000CN |
| Парткод: | Screw, M3x6 |
| Деталь: | Cartridge lifter assembly |
| Парткод: | RG5-5741-040CN |
Коды ошибок
10.10
10.32.00
11
13.01.00
13.03.00
13.05.00
13.06.00
13.09.00
13.0A.00
13.10.00
13.11.00
13.11.05
13.11.06
13.11.07
13.11.08
13.11.09
13.11.0A
13.11.10
13.12.XX
13.13.00
13.20.00
13.21.00
13.30.00
13.31.00
13.32.00
20
22
30.01.02
30.01.03
30.01.11
30.01.34
30.1.06
30.1.07
30.1.08
30.1.09
30.1.10
30.1.12
30.1.13
30.1.14
30.1.15
30.1.16
30.1.18
30.1.19
30.1.22
30.1.25
30.1.29
30.1.30
30.1.31
30.1.32
40
41.3
41.X
49.XX.XX
50.1
50.2
50.3
50.4
50.5
50.6
51.1
52.00
53.XY.ZZ
55.05
55.XX.YY
56.XX
57.01
57.03
57.04
57.05
57.06
57.07
57.08
58.03
58.04
59.10
59.20
59.30
59.40
60.X
62
65.12.99
66.00.15
66.11.00
66.11.01
66.12.06
66.12.11
66.12.20
66.12.21
66.12.31
66.12.32
66.12.33
66.12.34
66.12.35
66.12.36
66.12.41
66.12.50
66.12.51
66.12.60
66.12.61
66.12.86
66.12.95
68.0
68.1
79.XX.XX
80.XXX
80.XXXX
81
88.XXXX
Описание
| Error code: | 10.10 |
| Display: | 10.10 Supply Memory error |
| Description: | The product is unable to read the cartridge data. This message indicates that the product has determined that it cannot read or write to at least one e-label or at least one e-label is determined missing. This error can cause the supplies status feature to become disabled. |
| Remedy: | 1. Open the front door, lower the green handle, and remove the print cartridge. 2. Reinsert the cartridge, push the release button, and rotate the green handle to the locked position. 3. Close the front door. 4. If the message reappears, turn the product off then on. 5. If this problem still appears again, record the message and contact support. 6. Press Start to continue printing. 7. Touch OK from the Help menu to continue printing. |
| Error code: | 10.32.00 |
| Display: | 10.32.00 - Unauthorized Supply |
| Description: | A supply has been installed that does not pass the authentication test for genuine HP supplies. |
| Remedy: | If you believe you purchased a genuine HP supply, visit us at www.hp.com/go/ anticounterfeit. Any repair required as a result of using non-HP supplies or unauthorized supplies are not covered under warranty. HP cannot ensure the accuracy or the availability of certain features. To continue printing, touch OK. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 13.01.00 |
| Display: | 13.01.00 Jam in Tray 1 |
| Description: | The Tray 1 pickup roller or solenoid might not be working correctly. |
| Remedy: | 1. Load paper in Tray 1, and then use the paper path test to pull paper. Verify that the roller rotates. 2. If someone has performed maintenance on the product recently, verify that the Tray 1 pickup roller, feed roller, and separation roller have been installed correctly. 3. From the DIAGNOSTICS menu, run the multipurpose tray (Tray 1) solenoid component test to verify that the solenoid moves when energized. Listen for an audible “click” when the test is initiated. If the solenoid is not being energized, verify that the solenoid connector is attached to connector J71 on the DC controller PCA. 4. If the error persists, replace the Tray 1 solenoid (SL102). |
| Error code: | 13.03.00 |
| Display: | 13.03.00 JAM IN TRAY X |
| Description: | A jam has occurred in the specified location. This jam occurs when the product cannot move paper from the specified tray into the paper path. |
| Remedy: | 1. Inspect the paper path and remove any obstructions. 2. Verify that the tray is not loaded incorrectly or overfilled. 3. For Trays 3, 4, 5, or 6, verify that the trays are stacked correctly. 4. Verify that the media meets HP media specifications. 5. If maintenance has recently be performed, verify that the pickup, feed, and separation rollers have been reinstalled correctly. 6. Verify that connector J77 on the DC controller PCA is firmly seated. 7. From the DIAGNOSTICS menu, run the feed roller clutch (CL101) component test. 8. If the tray pickup motor rotates, yet the drive gears directly below the motor (on the Tray 2 pickup assembly) do not rotate, the clutch is not functioning properly. Replace the feed roller assembly. |
| Error code: | 13.05.00 |
| Display: | 13.05.00 JAM INSIDE TOP COVER |
| Description: | Paper failed to reach the delivery sensor within a specified period of time when a print job was initiated. When troubleshooting paper jams, always observe where the leading edge of the paper stops in the jam. |
| Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the fuser motor (M2) connector is firmly seated. The fuser motor wiring is hard-wired to the back of the ECU at connector J501. The motor connector is free-standing behind the ECU. To see if the fuser motor is functional, observe the output stacker rollers while turning on the device. If the rollers rotate, the motor is functional. If they do not rotate, verify the connection. |
| Error code: | 13.06.00 |
| Display: | 13.06.00 Jam inside left door |
| Description: | A jam is in the fuser area. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Replace the fuser. |
| Error code: | 13.09.00 |
| Display: | 13.09.00 Jam inside left door |
| Description: | A jam is in the face-down bin. The leading edge of the media failed to reach the face-down bin delivery sensor (PS1451) within the specified time. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Reseat the connections to the DC controller. - Make sure that the delivery flags move smoothly. - Run a service test. - Replace the delivery unit. - Replace the DC controller. |
| Error code: | 13.0A.00 |
| Display: | 13.0A.00 Jam inside left door |
| Description: | A jam is in an area accessible through the left door. The trailing edge of the media failed to leave the face-down bin delivery sensor (PS1451) within the specified time. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Replace the delivery unit. - Replace the diverter. |
| Error code: | 13.10.00 |
| Display: | 13.10.00 Jam inside left door |
| Description: | A jam is in the reversing area. The leading edge of the media did not reach the reversed paper sensor (PS2002) in the duplexer within the specified time. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Reseat the connections to the DC controller. - Replace the duplexer. |
| Error code: | 13.11.00 |
| Display: | 13.11.00 Jam inside left door |
| Description: | A jam is in the reversing area. The leading edge of the media did not reach the reversed paper sensor (PS2002) in the duplexer within the specified time. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Reseat the connections to the DC controller. - Replace the duplexer. |
| Error code: | 13.11.05 |
| Display: | 13.11.05 Jam in input accessory |
| Description: | A pickup delay jam is in the registration area. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Replace the paper pickup assembly. |
| Error code: | 13.11.06 |
| Display: | 13.11.06 Pickup stationary jam |
| Description: | A jam is in the pickup area of the input accessory. |
| Remedy: | - Clear the jam in the area indicated. - Remove the media from the right door of the product engine. |
| Error code: | 13.11.07 |
| Display: | 13.11.07 Jam in input accessory |
| Description: | A jam is in the right door area. A page stopped in the registration area. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Replace the vertical transfer unit. |
| Error code: | 13.11.08 |
| Display: | 13.11.08 Jam in input accessory |
| Description: | A paper delivery jam is in the vertical transfer unit registration area. |
| Remedy: | - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Check the function of the vertical transfer sensor. - Replace the vertical transfer sensor. - Replace the vertical transfer unit. |
| Error code: | 13.11.09 |
| Display: | 13.11.09 Jam in input accessory |
| Description: | A paper-delivery stationary jam is in the right door area. |
| Remedy: | - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Check the function of the vertical transfer sensor. - Replace the paper path connection unit. - Replace the vertical registration assembly. - Replace the diverter. |
| Error code: | 13.11.0A |
| Display: | 13.11.0A Jam in input device |
| Description: | A jam occurs in the input device as the product is turned on. |
| Remedy: | - Clear the jam. - Turn the product off, and then on. |
| Error code: | 13.11.10 |
| Display: | 13.11.10 Residual jam in delivery area |
| Description: | A jam occurs in the delivery area when the product is turned on or as the front door is closed. |
| Remedy: | - Clear the jam. - Turn the product off, and then on. - Replace the paper path connection unit. - Replace the VRA. |
| Error code: | 13.12.XX |
| Display: | 13.12.<XX> Jam in finishing device |
| Description: | finishing device (depending on the finishing device model). 11, 30–31 is a jam in the stapler. 21–23 or 01–05 is a jam in the flipper area. 20–25 is a jam in the accumulator area (stacker/stapler). 31–33 or 10–13 is a jam in the paper path. 34 is a ejectors jam. 40–42 is jam in the offset area (stacker). 41–43 is a jam in the folding area (multifunction finisher). 51–53 is a jam in the booklet area (multifunction finisher). 50–54 is a jam in the exit area (multi-bin mailbox) |
| Remedy: | - Follow instructions in online help. - Remove the jam from the finisher area. - Remove, realign, and reinstall the finishing device. - Turn the product off and turn it on. If the error continues, look for more jammed material. - See the Output finishing device service manual (Q5693.90002) for more detailed instructions. |
| Error code: | 13.13.00 |
| Display: | 13.13.00 Jam inside left door |
| Description: | A jam is in the duplexer area. The trailing edge of the media did not leave the duplexer paper sensor (PS2004) within a specified time. |
| Remedy: | - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the duplexer. |
| Error code: | 13.20.00 |
| Display: | 13.20.00 JAM INSIDE <LOCATION> |
| Description: | Paper has not moved past a certain paper sensor. <LOCATION> can be one of the following locations. • TRAY 2 • TOP COVER • REAR DOOR • DUPLEXER |
| Remedy: | • TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) status (B). Toggle the sensor flag to determine if the status changes. • TOP COVER Remove the print cartridge, and then check the paper path for obstructions. Verify that the top-of-page sensor (PS103) and the media width sensors (PS106 and PS108) are unblocked. Perform a manual sensor test and observe the status of these sensors. Toggle the sensor flags to determine if their status changes. • REAR DOOR Open or remove the rear face-up bin, and then check the paper path on each side of the fusing assembly for obstructions. Remove the fuser, if necessary. Perform a manual sensor test and observe the fuser delivery sensor (PS700) status (C). Toggle the sensor flag to determine if the status changes. • DUPLEXER Remove the duplexer, and then check the paper path for obstructions. If the message persists, replace the duplexer. |
| Error code: | 13.21.00 |
| Display: | 13.21.00 Jam inside left door |
| Description: | A door is open. |
| Remedy: | - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Run a service test. - Check the function of the interlock switches. - Replace the left door. |
| Error code: | 13.30.00 |
| Display: | 13.30.00 Jam inside right door |
| Description: | A jam is in the pickup area of Tray 1. |
| Remedy: | Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a service test. - Replace the paper input unit. - Replace the Tray 1 pickup rollers. - Replace Tray 1. |
| Error code: | 13.31.00 |
| Display: | 13.31.00 JAM INSIDE FRONT DOOR |
| Description: | A jam has occurred inside the front door. |
| Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the face-up tray sensor (PS1) is functioning properly. 3. Verify that connection J505 is firmly seated on the ECU. 4. Open and close the cartridge door to clear the error message |
| Error code: | 13.32.00 |
| Display: | 13.32.00 Jam inside right door |
| Description: | A jam is in the feed area. The media failed to leave the registration sensor (PS2) within the expected time. |
| Remedy: | - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the registration assembly. - Replace the paper-input unit. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 22 |
| Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
| Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
| Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
| Error code: | 30.01.02 |
| Display: | 30.01.02 ADF paper jam |
| Description: | Scanner calibration failure The scanner calibration failed. |
| Remedy: | 1. Turn the product off, and then on again. 2. After the product warms up, repeat the calibration process. Device Maintenance / Calibrate-Cleaning / Calibrate Scanner 3. If the error persists, clean the scanner glass and calibration strips. NOTE: Dust might appear on the underside of the glass, but this cannot be cleaned. a. Press the power button to turn the product off, and then disconnect the power cable from the electrical outlet. b. Open the scanner lid. c. Use a soft, lint-free cloth moistened with water to clean the calibration white strips and reflector plate (see call-outs). Also clean the document feeder glass, flatbed glass and plastic lid backing. NOTE: If needed, lens cleaner or nonabrasive glass cleaner can be applied to the cloth before cleaning the glass. Spray only onto the cloth and not directly onto the glass or device. Do not spray water or glass cleaner on the glass as it can seep under it and possibly damage the printer. Do not use abrasives, acetone, benzene, ethyl alcohol, or carbon tetrachloride on the glass; these can damage it and/or leave residue on the glass resulting in degraded copy/scan quality. 4. If the error persists, replace the Integrated Scanning Assembly (ISA). |
| Error code: | 30.01.03 |
| Display: | 30.01.03 Pick error |
| Description: | The document feeder sensors failed to detect a successful pick. |
| Remedy: | - Open the ADF feeder and remove the jammed media. Close the ADF feeder. - Reload the document and press Start. - If the error persists, run a sensors diagnostic test to verify that the skew front and skew back sensors are functioning correctly. - Verify that the pickup roller, the feed roller assembly, the separation belt assembly, and the registration roller assembly are clean and undamaged. |
| Error code: | 30.01.11 |
| Display: | 30.01.11 ADF skew error |
| Description: | A skew is detected in the ADF feeder. |
| Remedy: | - Remove the skewed media in the ADF feeder, and close the ADF feeder. - Reload the document, and then press Start. - If the error persists, run the sensors diagnostic test to verify that the skew front and skew back sensors are functioning correctly. - Verify that J112 on the scanner control board, J701 and J704 on the ADF intermediate PCA, and J801 on the ADF sensor PCA are seated correctly. - Verify that the pickup roller, the feed roller assembly, the separation belt assembly, and the registration roller assembly are clean and undamaged. |
| Error code: | 30.01.34 |
| Display: | 30.01.34 Scan failure |
| Description: | Scanner initialization failed, and the copyprocessor board (CPB) is not communicating with the scanner-controller board (SCB). |
| Remedy: | - Turn the product off, and then on. - Check the scanner controller board LEDs. - Check the connections to the scanner controller board. - Replace the scanner controller board. |
| Error code: | 30.1.06 |
| Display: | 30.1.06 Scan failure |
| Description: | The scanner lamp fan has failed. |
| Remedy: | - Verify that the product is turned on and that the fan is not functioning. - Check for loose connections and broken, frayed, or pinched wires. - Reseat the fan connector on the scanner control board and the connector on the fan. - Replace the fan. |
| Error code: | 30.1.07 |
| Display: | 30.1.07 Scan failure |
| Description: | The product has experienced a communication error. |
| Remedy: | - Print a configuration page to verify that the CPB firmware is loaded. - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. |
| Error code: | 30.1.08 |
| Display: | 30.1.08 Scan failure |
| Description: | The product has experienced a flatbed motor failure. |
| Remedy: | - Run the flatbed motor diagnostic test to verify that the flatbed motor is functioning correctly. - Check for loose connections and broken, frayed, or pinched wires. - Reseat the flatbed motor connector at the SCB location J108. - Replace the flatbed motor. |
| Error code: | 30.1.09 |
| Display: | 30.1.09 Scan failure |
| Description: | The pickup roller home position sensor is not detecting the pickup roller home position. |
| Remedy: | - Run the ADF INPUT diagnostic test to verify that the pickup roller assembly is functioning correctly. - Check for loose connections and broken, frayed, or pinched wires. - Reseat connector J112 on the SCB, connectors J701 and J703 on the ADF intermediate PCA, and connector J716 on the pickup roller home position detection sensor. - Check the pickup roller home position detection sensor and the pickup roller assembly for disengagement or damage. - Replace the SCB. |
| Error code: | 30.1.10 |
| Display: | 30.1.10 Scan failure |
| Description: | The product has experienced an ADF fan error. |
| Remedy: | - Verify that the fan is not functioning while the product is turned on. - Check for loose connections and broken, frayed, or pinched wires. - Reseat the fan connector at scanner control PCA location J109, and connector J156 on the ADF fan. - Replace the ADF fan. - Replace the SCB. |
| Error code: | 30.1.12 |
| Display: | 30.1.12 Scan failure |
| Description: | The ADF has experienced an ASIC error. |
| Remedy: | - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. - Reconnect connectors J158 and J159 on the ADF inverter PCA, and reconnect connector J104 on the SCB. - Reconnect connector J102 on the ADF inverter PCA, connectors J301 and J304 on the ADF analog processor board, and J601 on the ADF CCD driver PCA. - Reconnect connector J303 on the ADF analog processor PCA and connector J602 on the ADF CCD driver PCA. - Replace the ADF analog processor PCA. - Replace the SCB. - Replace the ADF optical assembly. |
| Error code: | 30.1.13 |
| Display: | 30.1.13 Scan failure |
| Description: | The scanner has experienced an ASIC error |
| Remedy: | - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. - Reconnect connector J161 and J162 on the flatbed inverter PCA, and connector J205 on the SCB. - Reconnect connector J103 on the SCB, J504 and J503 on the flatbed intermediate PCA, J201 and J202 on the flatbed analog processor PCA, and J601 on the flatbed CCD driver PCA. - Reconnect connector J105 on the SCB, J502 and J501 on the flatbed intermediate PCA, J203 and J204 on the flatbed analog processor PCA, and J602 on the flatbed CCD driver PCA. - Replace the SCB. - Replace the flatbed optical assembly. |
| Error code: | 30.1.14 |
| Display: | 30.1.14 Scan failure |
| Description: | The product has experienced an EEPROM error |
| Remedy: | Replace the SCB. |
| Error code: | 30.1.15 |
| Display: | 30.1.15 Scan failure |
| Description: | A condition has prevented the scan engine from initializing. |
| Remedy: | - Verify that all covers are installed correctly and that the ADF and the ADF feeder are closed. - Turn the product off, and then on. - If the error persists, run the sensors diagnostic test to verify that the sensors are functioning correctly. - Check the LED status on the control panel. Follow the troubleshooting instructions if the LEDs are not in the ready state. |
| Error code: | 30.1.16 |
| Display: | 30.1.16 Scan failure |
| Description: | The product has detected incorrect ADF width sensor values. |
| Remedy: | Calibrate the ADF width sensor. |
| Error code: | 30.1.18 |
| Display: | 30.1.18 Scan failure |
| Description: | The product has experienced an ASIC error. |
| Remedy: | - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. - Check connections to the SCB. - Check connections to the intermediate PCA, the analog processor PCA, and the CCD driver PCA. - Replace the SCB. - Replace the flatbed optical assembly. |
| Error code: | 30.1.19 |
| Display: | 30.1.19 Scan failure |
| Description: | Lamp error |
| Remedy: | - Turn the product off, and then on. - Check to see that the scanner lamp illuminates while the product is turned on. - Check the connections to the SCB. - Replace the SCB. - Replace the flatbed optical assembly. |
| Error code: | 30.1.22 |
| Display: | 30.1.22 Scan failure |
| Description: | CP processing error. |
| Remedy: | - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. |
| Error code: | 30.1.25 |
| Display: | 30.1.25 Scan failure |
| Description: | Copy processor board error. |
| Remedy: | - Turn the product off, and then disconnect the power cord. - Connect the power cord, and then turn the product on. - Check the copy processor LED. - Check connections to the copy processor board. - Check the scan engine cable connection. - Replace the copy processor board. |
| Error code: | 30.1.29 |
| Display: | 30.1.29 ADF output bin full |
| Description: | The ADF output bin is full. |
| Remedy: | - Empty the ADF output bin. - Check the connection to the ADF output bin full sensor. - Check the connection to the scanner controller board. - Replace the ADF output bin full sensor. - Replace the scanner controller board. |
| Error code: | 30.1.30 |
| Display: | 30.1.30 Scan failure |
| Description: | DC FIFO overrun. |
| Remedy: | - Turn the product off, and then on. - Check the connection to the scanner controller board. - Replace the scanner controller board. - Turn the product off, and then on. |
| Error code: | 30.1.31 |
| Display: | 30.1.31 Scan failure |
| Description: | SSI FIFO overrun. |
| Remedy: | - Turn the product off, and then on. - Check the connection to the scanner controller board. - Check the scan engine cable connection. - Replace the copy processor board. |
| Error code: | 30.1.32 |
| Display: | 30.1.32 Scan failure |
| Description: | Swath overflow. |
| Remedy: | - Turn the product off, and then on. - Check copy processor board connection. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41.3 |
| Display: | 41.3 UNEXPECTED SIZE IN TRAY <X> |
| Description: | You have configured the tray for a different size of paper than the print job requires. NOTE: This error can be caused by a multi feed problem. Open, and then close, the cartridge door to clear the error message. If the error persists, and the tray is correctly configured, try cleaning the Tray 1 pickup roller (or you might have to replace the roller). |
| Remedy: | 1. Reload the tray with the correct paper size. 2. Make sure the paper size that is specified in the software program, the printer driver, and the control panel are all the same. 3. Press the OK button and scroll to the TRAY <X> SIZE = <Size> option. Reconfigure the size in a tray to match the size required for the print job. 4. If the error does not clear, turn the product off and then on. 5. If the message persists, contact an HPauthorized service or support provider. |
| Error code: | 41.X |
| Display: | 41.X ERROR |
| Description: | A temporary printing error occurred. |
| Remedy: | 1. Press OK to see if the page will print. If necessary, turn the product off and then on. 2. Verify that the loaded paper meets HP specifications. If pages stick together, the paper detect sensors will detect a sheet of paper longer than what is expected in the product. 3. Verify that all paper size settings on the control panel, in the print driver settings, and in the software program match. 4. Verify that the correct size paper is loaded in the input tray. |
| Error code: | 49.XX.XX |
| Display: | 49.<XX>.<XX> Error To continue turn off then on |
| Description: | A critical firmware error has occurred. This type of error can be caused by invalid print commands, corrupt data, or invalid firmware operations. In many cases, turning the product off and turning it on permanently clears the error, and the product continues without issues. In some cases, electrical noise over the cables can corrupt data during transmission. Faulty USB cables, poor connections, and specific software issues can also cause these errors. The formatter can also cause these errors; however such an error is usually a 79 code. Replacing the formatter rarely solves repetitive 49 errors. |
| Remedy: | - Turn the product off, and then on. - Upgrade the firmware. - Try printing from a different software application to determine whether the application is causing the problem. Go back to the original application an try printing a different file. If the problem seems to be with the software application, contact the vender. Try the following actions: 1. Disconnect all connections to networks and computers. 2. Turn the product off. 3. Remove the DIMM. 4. Remove all EIO devices. 5. Turn the product on. 6. If error disappears, reinstall the EIO devices one at a time to see if the error returns (turn the product off, install the EIO device, and turn it on). If the error returns replace the faulty EIO device. 7. If the error still does not reappear, reconnect each connection to computers or networks until the error reappears. 8. Replace the component that causes the error message. |
| Error code: | 50.1 |
| Display: | 50.1 FUSER ERROR |
| Description: | AC power is not being provided to the fuser assembly. AC voltage is necessary to generate heat in the fuser assembly. |
| Remedy: | 1. Verify that the fuser power cable at the back of the device is connected and the ECU is fully seated. 2. If the message persists, replace the fuser assembly. |
| Error code: | 50.2 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. fuser warm up service. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.3 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. high fuser temperature |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.4 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred.f aulty fuser. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.5 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. inconsistent fuser. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.6 |
| Display: | 50.6 FUSER ERROR |
| Description: | The main or sub thermistors are unable to provide temperature feedback to the ECU. The main and sub thermistors monitor the fuser assembly hot-roller temperature and provide feedback to regulate the fusing temperature. |
| Remedy: | 1. Verify that the seven-wire connector is firmly seated in connector J405 on the ECU. You might have to remove the main cooling fan to see this connection. 2. Verify that the four-wire connector at the rear of the device is firmly seated in the fuser assembly. 3. Verify that the AC voltage is being provided to the fuser assembly. 4. If the message persists, replace the fuser assembly. |
| Error code: | 51.1 |
| Display: | 51.<XY> Error |
| Description: | A fuser error has occurred. a beam detect error. |
| Remedy: | - Turn off the product, and turn it on. - Reseat the connections to the DC controller and the laser scanner. - Replace the laser/scanner. - Replace the upper cable guide assembly. - Replace the DC controller. |
| Error code: | 52.00 |
| Display: | 52.00 ERROR |
| Description: | A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of a print job. |
| Remedy: | 1. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection. 3. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated You must remove the ECU in order to verify this connection. 4. If the message persists, replace the laser/scanner assembly. |
| Error code: | 53.XY.ZZ |
| Display: | 53.XY.ZZ CHECK RAM DIMM SLOT <X> |
| Description: | There is a problem with the product memory. The DIMM that caused the error will not be used. Values of X and Y are as follows: • X = DIMM type, 0 = ROM, 1 = RAM • Y = DIMM location, 0 = Internal memory (ROM or RAM), 1 = DIMM slot 1 |
| Remedy: | Press OK to continue if you are prompted. If the message continues, you might need to replace the specified DIMM. Turn the product off, and then replace the DIMM that caused the error. |
| Error code: | 55.05 |
| Display: | 55.05 Engine Firmware RFU Error To continue turn off then on |
| Description: | An issue caused the firmware upgrade to fail. |
| Remedy: | - Turn the product off, and then on. - Restart the firmware upgrade. - If the problem continues, try a different firmware file. |
| Error code: | 55.XX.YY |
| Display: | 55.XX.YY DC CONTROLLER ERROR |
| Description: | A temporary printing error occurred. |
| Remedy: | 1. Turn the product off and then on. 2. Remove any third-party memory or USB device, and then turn the product off and then on. 3. Remove and then reinstall the formatter. 4. If the error persists, remove the formatter and perform an engine test. If the engine test page fails to print, replace the DC controller. If the engine test page prints, replace the formatter. |
| Error code: | 56.XX |
| Display: | 56.XX ERROR |
| Description: | A temporary printing error occurred as a result of an incorrect input or output request. |
| Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |
| Error code: | 57.01 |
| Display: | 57.01 |
| Description: | Fan 1 error. The product has experienced an error with its internal fan. |
| Causes: | Fan 1 error |
| Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the internal cooling fan (HP Part #: RK2-8068-000CN).4. If the error persists, replace the product. |
| Error code: | 57.03 |
| Display: | 57.03 ERROR |
| Description: | Fan FN102 has experienced an error. |
| Remedy: | 1. Inspect fan FN102 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J75 on the DC controller PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 57.04 |
| Display: | 57.04 ERROR |
| Description: | Fan FN101 has experienced an error. |
| Remedy: | 1. Inspect fan FN101 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J64 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 57.05 |
| Display: | 57.05 ERROR |
| Description: | The duplexer fan has experienced an error. |
| Remedy: | 1. Inspect the fan to determine if its rotational movement is being obstructed. 2. If the error persists, replace the duplexer. |
| Error code: | 57.06 |
| Display: | 57.<XX> Error To continue turn off then on |
| Description: | A product error occurred. face-down bin error. |
| Remedy: | - Turn the product off and turn it on. - Reseat connections to the DC controller and to the specified fan. - Replace the specified fan. - Replace the DC controller. |
| Error code: | 57.07 |
| Display: | 57.07 ERROR |
| Description: | Fan FN301 has experienced an error. |
| Remedy: | 1. Inspect fan FN301 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J65 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 57.08 |
| Display: | 57.<XX> Error To continue turn off then on |
| Description: | A product error occurred. duplexer fan error. |
| Remedy: | - Turn the product off and turn it on. - Reseat connections to the DC controller and to the specified fan. - Replace the specified fan. - Replace the DC controller. |
| Error code: | 58.03 |
| Display: | 58.<XX> Error To continue turn off then on |
| Description: | A product error occurred. CPU error. |
| Remedy: | - Turn the product off and turn it on. - Check the configuration. - Replace the print cartridge. - Replace the toner sensor contact assembly. - Replace the DC controller. |
| Error code: | 58.04 |
| Display: | 58.04 |
| Description: | Low voltage power supply malfunction. The product has experienced an error with the low voltage power supply. |
| Causes: | Low voltage power supply malfunction |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. Check the voltage label on the back of the product. If the product is rated 220V and is plugged into a 110V outlet, this error might occur. In most cases, no damage is caused to the product. If a power transformer is used to convert 220V power to 110V, verify that the transformer power rating is sufficient to operate the product.4. If the error persists, replace the Low Voltage Power Supply PCB Assembly: M402, M403 L.V.POWER SUPPLY PCB ASS`Y (110v) RM2-8516-000CN M402, M403 L.V.POWER SUPPLY PCB ASS`Y (220v) RM2-8517-000CN M426, M427 L.V.POWER SUPPLY PCB ASS`Y (110v) RM2-8518-000CN M426, M427 L.V.POWER SUPPLY PCB ASS`Y (220v) RM2-8519-000CN5. If the error persists, replace the product. |
| Error code: | 59.10 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. motor startup error. |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 59.20 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. motor rotation error. |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 59.30 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. fuser motor startup error. |
| Causes: | Fuser motor startup error |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 59.40 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. fuser motor rotation error. |
| Causes: | Fuser motor rotation error |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 60.X |
| Display: | 60.<X> Tray <X> lifting error |
| Description: | This message displays when the tray is in the process of lifting the paper to the top of the tray for proper feeding and some obstruction prevents the tray from lifting properly. 60.02 is a lifting error in Tray 2. 60.03 is a lifting error in Tray 3. 60.04 is a lifting error in Tray 4. |
| Remedy: | - Check the tray for obstructions. - Remove and reseat the tray. - Perform a service test. - Remove the two trays and swap their positions. If the error changes, the tray might be defective. - Replace the paper input unit. |
| Error code: | 62 |
| Display: | Nongenuine Toner Replace Toner |
| Description: | The toner cartridge installed is not a genuine cartridge. |
| Causes: | · Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board |
| Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
| Error code: | 65.12.99 |
| Display: | 65.12.99 - Output Accessory Disconnected |
| Description: | An external paper handling accessory connection was interrupted. |
| Remedy: | - Turn the product off. - Make sure that the external paper handling accessory is clear of all packing material and other obstructions. - Check the external paper handling accessory connection, ensuring it is properly seated. If the accessory uses cables, disconnect and reconnect them. - Turn the product on. |
| Error code: | 66.00.15 |
| Display: | 66.00.15 - External device failure To continue turn off then on |
| Description: | This error occurs under the following conditions: - An external device was disconnected and a different external device (different model or same model with different firmware) was reconnected. - The external device begins to restart while the product is already running. This can happen due to interruptions with the power on signal. - An upgrade to the external device is not completed within a specified time. This can cause the PHC to crash, requiring the upgrade to be restarted. |
| Remedy: | - Make sure that the stacker bin area is clear of all packing material and other obstructions. - Turn the product off, and then on. - Check the external paper handling accessory connection to see that it is properly seated. If the accessory uses cables, disconnect them, and reconnect them. |
| Error code: | 66.11.00 |
| Display: | 66.11.00 Input Device Failure Turn Off, Check Connection, Turn On |
| Description: | A failure in an external input device occurred. A lifting operation was not completed within the allotted time. |
| Remedy: | - Make sure that the tray on the left side of the lift deck is empty. - Check the connections. - Turn off the product and turn it on. - Print two pages as a paper path test. - Reseat the input device. - Replace the input device. |
| Error code: | 66.11.01 |
| Display: | 66.11.01 – Input Device Failure |
| Description: | The paper path connection unit is not installed. |
| Remedy: | Install the paper path connection unit. |
| Error code: | 66.12.06 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. flipper encoder error in the multi bin mailbox. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.11 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. stapler carriage motor failure in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.20 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. timeout failure on the retainer sensor (it was never reached) in the stapler stacker. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.21 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. bearing bracket failure (damage) in the stapler stacker. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.31 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. home position timeout failure in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.32 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. home position timeout failure in the aligning paddles on the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.33 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. delivery motor failure (motor 6) in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.34 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. front paper alignment motor failure (motor 3) in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.35 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. rear paper alignment motor failure (motor 4) in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.36 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. stacker bin motor failure (motor 5) in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.41 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. stapling folder motor failure (motor 7) in the multi functional finisher. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.50 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. stack holder failure (damage) in the stapler stacker |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.51 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. booklet bin motor failure (motor 10) in the multi functional finisher |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.60 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. EEPROM error in the stapler stacker or an initial slider operation error in the multi bin mailbox |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.61 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. slider operation error in the multi bin mailbox. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.86 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. belt encoder error in the multi bin mailbox. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 66.12.95 |
| Display: | 66.12.<ZZ> Output accessory failure |
| Description: | This error is caused by failures in the output accessories. PCA check error in the multi bin mailbox. |
| Remedy: | - Follow the instructions in online help. - Turn the product off and turn it on. |
| Error code: | 68.0 |
| Display: | 68.<X> Permanent storage full Permanent storage write fail. To continue, touch "OK" |
| Description: | The NVRAM or the hard disk is full. The storage device is failing to write. Touching OK to clear the message brings up 0 for the NVRAM or a 1 for the hard disk. Printing can continue, but it might produce unexpected responses. NVRAM error. |
| Remedy: | - Check the configuration. - Turn off the product and turn it on. - Reseat the hard disk. - Replace the hard disk. |
| Error code: | 68.1 |
| Display: | 68.<X> Permanent storage full Permanent storage write fail. To continue, touch "OK" |
| Description: | The NVRAM or the hard disk is full. The storage device is failing to write. Touching OK to clear the message brings up 0 for the NVRAM or a 1 for the hard disk. Printing can continue, but it might produce unexpected responses. removable disk error. |
| Remedy: | - Check the configuration. - Turn off the product and turn it on. - Reseat the hard disk. - Replace the hard disk. |
| Error code: | 79.XX.XX |
| Display: | 79.<XX>.<XX> Error To continue turn off then on |
| Description: | A critical formatter error occurred. |
| Remedy: | - Turn the product off, and then on. - Upgrade the firmware. - Replace the formatter. |
| Error code: | 80.XXX |
| Display: | 80.XXX Embedded Jetdirect error |
| Description: | An embedded Jetdirect error occurred. |
| Remedy: | Turn the product off, and then on. |
| Error code: | 80.XXXX |
| Display: | 80.XXXX EIO error |
| Description: | The EIO accessory card in slot X encountered a critical error. |
| Remedy: | - Turn the product off, and then on. - Reseat the EIO card. - Move the EIO card to a different slot. - Replace the EIO card. |
| Error code: | 81 |
| Display: | 81 |
| Description: | Controller to Engine Communications Failure, Code 81 |
| Remedy: | 1. Cycle power to the printer to clear the error. 2. Turn the printer off. 3. Remove the Image processor board, IP board cover and metal cover. 4. Inspect the orange ribbon cable between the relay board and the engine control board. 5. Is the connector fully seated and free from damage? Replace in the following order: • Image processor board • Electrical chassis assembly • Engine control board |
| Error code: | 88.XXXX |
| Display: | 88.XXXX |
| Description: | Service test is initialized. 0000 indicates that the test passed. |
