Canon imageRUNNER 2820i
Рейтинг
Модули
500 DRUM CARTRIDGE ASSEMBLY
130 CONTROL PANEL ASSEMBLY
106 INTERNAL COMPONENTS 5
250 MAIN DRIVE ASSEMBLY
261 DUPLEXING DRIVE ASSEMBLY
950 RESOLUTION CONVERSION PCB ASSEMBLY
315 MULTI FEEDER TRAY ASSEMBLY
360 DUPLEXING FEEDER ASSEMBLY
260 PAPER PICK-UP DRIVE ASSEMBLY
110 POWER CORD TERMINAL ASSEMBLY (100/120V)
640 DEVELOPING ASSEMBLY
940 PAPER PICK-UP PCB ASSEMBLY
280 FIXING FEEDER DRIVE ASSEMBLY
111 POWER CORD TERMINAL ASSEMBLY (220/240V)
120 RIGHT DOOR ASSEMBLY
100 EXTERNAL COVERS, PANELS, ETC
920 CONTROL PANEL CPU PCB ASSEMBLY
350 PAPER DELIVERY ASSEMBLY
102 INTERNAL COMPONENTS 1
107 MACHINE REAR PLATE
330 PAPER FEEDER ASSEMBLY
900 CONTROLLER BOX ASSEMBLY
460 SCANNER ASSEMBLY
810 FIXING ASSEMBLY
921 CONTROL PANEL INVERTER PCB ASSEMBLY
310 PAPER PICK-UP MOUNT ASSEMBLY 1
191 MASHINE EXHAUST FAN ASSEMBLY
105 INTERNAL COMPONENTS 4
351 LEFT VERTICAL PATH ASSEMBLY
104 INTERNAL COMPONENTS 3
930 DC CONTROLLER PCB ASSEMBLY
310 PAPER PICK-UP MOUNT ASSEMBLY 2
910 HV POWER SUPPLY PCB ASSEMBLY
300 CASSETTE
320 REGISTRATION FRONT GUIDE ASSEMBLY
190 DEVELOPING FAN ASSEMBLY
103 INTERNAL COMPONENTS 2
101 MACHINE FRONT PLATE
Детали 640 DEVELOPING ASSEMBLY
| Деталь: | ROWEL, 1 |
| Парткод: | FB5-4986-000 |
| Деталь: | HOLDER, ROWEL, 1 |
| Парткод: | FB5-5019-000 |
| Деталь: | SHAFT, ROWEL |
| Парткод: | FB5-5269-000 |
| Деталь: | ROWEL, 2 |
| Парткод: | FB5-5270-000 |
| Деталь: | ROWEL, 3 |
| Парткод: | FB5-5273-000 |
| Деталь: | ROWEL, 4 |
| Парткод: | FB5-5279-000 |
| Деталь: | SHEET, CONTAINER, LOWER |
| Парткод: | FF6-0160-000 |
| Деталь: | KNOB, CARTRIDGE |
| Парткод: | FA6-5618-000 |
| Деталь: | DRUM CARTRIDGE ASSEMBLY |
| Парткод: | NPN |
| Деталь: | KEY TOP, COUNTER |
| Парткод: | FB4-5005-000 |
| Деталь: | KEY TOP, START |
| Парткод: | FB5-2172-000 |
| Деталь: | KEY TOP, STOP |
| Парткод: | FB5-2173-000 |
| Деталь: | KEY TOP, RESET |
| Парткод: | FB5-3698-000 |
| Деталь: | KEY TOP, POWER SUPPLY |
| Парткод: | FB5-3699-000 |
| Деталь: | WINDOW, LAMP, 1 |
| Парткод: | FB5-5076-000 |
| Деталь: | WINDOW, LAMP, 2 |
| Парткод: | FB5-5077-000 |
| Деталь: | KEY TOP, NUMBERS |
| Парткод: | FF6-0206-000 |
| Деталь: | CABLE, FCC |
| Парткод: | FH2-6842-000 |
| Деталь: | ANALOG TOUCH PANEL UNIT |
| Парткод: | FH6-0834-000 |
| Деталь: | SCREW,M3X8 |
| Парткод: | XA9-0591-000 |
| Деталь: | CONTROL PANEL PCB ASSEMBLY |
| Парткод: | FG6-7021-000 |
| Деталь: | CABLE, CONTROL PANEL INVERTER |
| Парткод: | FG6-7022-000 |
| Деталь: | CABLE, CONTROL PANEL KEY, 1 |
| Парткод: | FG6-7068-000 |
| Деталь: | CABLE, CONTROL PANEL KEY, 2 |
| Парткод: | FG6-7069-000 |
| Деталь: | CABLE, COUNTER VR |
| Парткод: | FG6-7070-000 |
| Деталь: | CABLE, SWITCH |
| Парткод: | FG6-7071-000 |
| Деталь: | LCD CONTROL PANEL UNIT |
| Парткод: | FG6-9149-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB3-8320-000 |
| Деталь: | KNOB, CONTRAST |
| Парткод: | FB5-3718-000 |
| Деталь: | HOLDER, LED |
| Парткод: | FB5-2195-000 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-5754-000 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-5755-000 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-5756-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,W/WASHER,M3X6 |
| Парткод: | XB2-8300-607 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FG6-5753-000 |
| Деталь: | COVER, HEATER CONNECTOR |
| Парткод: | FB3-3192-030 |
| Деталь: | GUIDE, CARTRIDGE |
| Парткод: | FB5-5059-000 |
| Деталь: | HANDLE, PAPER DUST CLEANING |
| Парткод: | FB5-9252-000 |
| Деталь: | PIN, POSITIONING |
| Парткод: | FF6-0247-000 |
| Деталь: | PIN, POSITIONING |
| Парткод: | FF6-0111-000 |
| Деталь: | SCREW,RS,M4X10 |
| Парткод: | XA9-0721-000 |
| Деталь: | FOOT, RUBBER |
| Парткод: | XH9-0125-000 |
| Деталь: | ROD, TENSION |
| Парткод: | FB5-9249-000 |
| Деталь: | PLATE, PAPER DUST CLEANING |
| Парткод: | FF6-0092-000 |
| Деталь: | PAD UNIT, PAPER DUST CLEANING |
| Парткод: | FF6-0102-000 |
| Деталь: | CAM, PRESSURE RELEASE |
| Парткод: | FB6-2770-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1953-000 |
| Деталь: | GEAR, 22T |
| Парткод: | FS7-0707-000 |
| Деталь: | HEATER, CASSETTE |
| Парткод: | FH7-4576-000 |
| Деталь: | TIE, CABLE |
| Парткод: | WT2-5041-000 |
| Деталь: | PIN, POSITIONING |
| Парткод: | FF6-0243-000 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X6 |
| Парткод: | XB1-2400-606 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X4 |
| Парткод: | XB1-2400-409 |
| Деталь: | INTERNAL COMPONENTS 5 |
| Парткод: | NPN |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | FH6-1845-000 |
| Деталь: | BUSHING |
| Парткод: | FA9-2112-000 |
| Деталь: | SUPPORT, SLEEVE |
| Парткод: | FB3-2576-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB5-5036-000 |
| Деталь: | SHIELD, MOTOR |
| Парткод: | FB5-5038-000 |
| Деталь: | RING, E |
| Парткод: | FB5-5039-000 |
| Деталь: | CLUTCH, ELECTRO MAGNETIC |
| Парткод: | FH6-5007-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS5-2312-000 |
| Деталь: | PULLEY, 51T |
| Парткод: | FS5-3815-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-609 |
| Деталь: | SETSCERW,M3X4 |
| Парткод: | XB6-2300-409 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | MAIN DRIVE ASSEMBLY |
| Парткод: | FG6-5727-040 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1851-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-004 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-609 |
| Деталь: | DUPLEXING DRIVE ASSEMBLY |
| Парткод: | FG6-5651-000 |
| Деталь: | IC, EPM7032AETC44-4, ASIC |
| Парткод: | FH4-6208-000 |
| Деталь: | IC, MB87L1791, GATE ARRAY |
| Парткод: | FH4-6152-000 |
| Деталь: | IC, UPD65948GN-053-LMU |
| Парткод: | FH4-6072-000 |
| Деталь: | RESOLUTION CONV. PCB ASSEMBLY |
| Парткод: | FG6-6069-000 |
| Деталь: | RACK |
| Парткод: | FB1-8619-000 |
| Деталь: | PLATE, LOCK |
| Парткод: | FB1-8621-000 |
| Деталь: | GEAR, 18T |
| Парткод: | FB1-8625-000 |
| Деталь: | PLATE, PAPER END, FRONT |
| Парткод: | FB5-3577-000 |
| Деталь: | PLATE, PAPER END, REAR |
| Парткод: | FB5-3578-000 |
| Деталь: | SUPPORT, BELT |
| Парткод: | FB3-2836-000 |
| Деталь: | TRAY, MULTI FEED |
| Парткод: | FB4-3264-000 |
| Деталь: | TRAY, SLIDE |
| Парткод: | FB4-3265-000 |
| Деталь: | PANEL, MULTI FEEDER TRAY |
| Парткод: | FB5-4745-000 |
| Деталь: | PULLEY, IDLER |
| Парткод: | FS5-3177-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | BELT, TIMING |
| Парткод: | XF9-0393-000 |
| Деталь: | MULTI PAPER SIZE PCB ASSEMBLY |
| Парткод: | FG5-6289-000 |
| Деталь: | LABEL, SIZE |
| Парткод: | FS5-8612-000 |
| Деталь: | LABEL, SIZE |
| Парткод: | FS5-8613-000 |
| Деталь: | LABEL, SIZE |
| Парткод: | FS5-8614-000 |
| Деталь: | LABEL, SIZE |
| Парткод: | FS5-8615-000 |
| Деталь: | SCREW, M4X10 |
| Парткод: | XA9-0606-000 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X6 |
| Парткод: | XB4-7300-609 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-502 |
| Деталь: | MULTI FEEDER TRAY ASSEMBLY |
| Парткод: | FG6-5649-000 |
| Деталь: | MAGNET, CATCH |
| Парткод: | FB3-2997-000 |
| Деталь: | FLAG, DUPLEXING P. FEED SENSOR |
| Парткод: | FB6-2784-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB4-2935-000 |
| Деталь: | SPACER, GUIDE |
| Парткод: | FB4-2955-000 |
| Деталь: | ROLLER, DUPLEXING FEEDER |
| Парткод: | FB5-4747-000 |
| Деталь: | GUIDE, DUPLEXING FEEDER, UPPER |
| Парткод: | FB5-4748-000 |
| Деталь: | GUIDE, DUPLEXING FEEDER, LOWER |
| Парткод: | FB5-4749-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB5-4750-000 |
| Деталь: | SPACER |
| Парткод: | FB5-4754-000 |
| Деталь: | ROLLER, DUPLEXING |
| Парткод: | FB5-4773-000 |
| Деталь: | SCREW,RS STEPPED,M3 |
| Парткод: | FS5-9664-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | PULLEY, 26T/GEAR, 24T |
| Парткод: | FS7-0722-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FS7-0723-000 |
| Деталь: | BUSHING |
| Парткод: | XG9-0482-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD9-0103-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF2-3112-940 |
| Деталь: | CABLE, DUPLEXING FEEDER |
| Парткод: | FG3-1597-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-006 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-600 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-242 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | DUPLEXING FEEDER ASSEMBLY |
| Парткод: | FG6-5650-000 |
| Деталь: | BUSHING |
| Парткод: | FA9-2112-000 |
| Деталь: | ARM, TRIGGER |
| Парткод: | FB5-5045-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-5046-000 |
| Деталь: | CABLE, CLUTCH |
| Парткод: | FF3-4190-000 |
| Деталь: | SHAFT, CAM JOINT |
| Парткод: | FF6-0186-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1849-000 |
| Деталь: | CLUTCH, ELECTRO MAGNETIC |
| Парткод: | FH6-5006-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5051-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1943-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1947-000 |
| Деталь: | PULLEY, 38T/34T |
| Парткод: | FS5-3824-000 |
| Деталь: | GEAR, 36T |
| Парткод: | FS7-0725-000 |
| Деталь: | GEAR, 36T/18T |
| Парткод: | FS7-0726-000 |
| Деталь: | GEAR, 33T |
| Парткод: | FS7-0727-000 |
| Деталь: | GEAR, 25T/39T |
| Парткод: | FS7-0728-000 |
| Деталь: | GEAR, 36T/24T |
| Парткод: | FS7-0729-000 |
| Деталь: | GEAR, 39T/20T |
| Парткод: | FS7-0730-000 |
| Деталь: | GEAR, 49T |
| Парткод: | FS7-0731-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FS7-0737-000 |
| Деталь: | GEAR, 17T |
| Парткод: | FS7-0753-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | CABLE, REGISTRATION |
| Парткод: | FF3-4165-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-609 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2200-142 |
| Деталь: | PAPER PICK-UP DRIVE ASSEMBLY |
| Парткод: | FG6-5726-000 |
| Деталь: | HANDLE, RIGHT REAR |
| Парткод: | FB5-5193-000 |
| Деталь: | CORD, POWER |
| Парткод: | FF3-4192-000 |
| Деталь: | CORD, POWER |
| Парткод: | FF3-4193-000 |
| Деталь: | BREAKER, CIRCUIT |
| Парткод: | FH7-7528-000 |
| Деталь: | FUSE |
| Парткод: | VD7-0211-001 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FH2-5006-000 |
| Деталь: | POWER CORD TERMINAL ASSEMBLY |
| Парткод: | FG6-5777-000 |
| Деталь: | POWER CORD TERMINAL ASSEMBLY |
| Парткод: | FG6-5781-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X8 |
| Парткод: | XB1-2400-803 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X20 |
| Парткод: | XB1-2402-009 |
| Деталь: | WASHER,TOOTHED LOCK |
| Парткод: | XD1-4200-402 |
| Деталь: | SCREW,W/WASHER,M4X6 |
| Парткод: | XB2-7400-607 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB1-5816-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FB1-6710-000 |
| Деталь: | SEAL, FRONT |
| Парткод: | FB1-6718-000 |
| Деталь: | SEAL, REAR |
| Парткод: | FB1-6719-000 |
| Деталь: | CARTRIDGE LOCK, RIGHT |
| Парткод: | FB1-7218-000 |
| Деталь: | CARTRIDGE LOCK, LEFT |
| Парткод: | FB1-7219-000 |
| Деталь: | PLATE, POSITIONING |
| Парткод: | FB1-8130-000 |
| Деталь: | PLATE, TERMINAL, FRONT |
| Парткод: | FB3-2672-000 |
| Деталь: | ROD, STIRRING |
| Парткод: | FB3-2679-000 |
| Деталь: | SHAFT, AUXILIARY |
| Парткод: | FB3-2712-000 |
| Деталь: | SUPPORT, STIRRING, FRONT |
| Парткод: | FB4-3057-000 |
| Деталь: | SUPPORT, STIRRING, REAR |
| Парткод: | FB4-3058-000 |
| Деталь: | SHEET, HOLE BLANKING |
| Парткод: | FB4-3355-000 |
| Деталь: | PLATE, BIAS |
| Парткод: | FB5-4953-000 |
| Деталь: | COVER, SLIDE |
| Парткод: | FB5-4965-000 |
| Деталь: | COVER, DEVELOPING, FRONT |
| Парткод: | FB5-4966-000 |
| Деталь: | BLADE |
| Парткод: | FB5-4968-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FE5-4134-000 |
| Деталь: | CABLE, TONER SENSOR |
| Парткод: | FF3-4188-000 |
| Деталь: | HOLDER, SLEEVE, FRONT |
| Парткод: | FF5-4480-000 |
| Деталь: | HOLDER, SLEEVE, REAR |
| Парткод: | FF5-4481-000 |
| Деталь: | COVER, HOPPER, UPPER |
| Парткод: | FF6-0153-000 |
| Деталь: | COVER, HOPPER, LOWER |
| Парткод: | FF6-0154-000 |
| Деталь: | STIRRER, 3 |
| Парткод: | FF6-0155-000 |
| Деталь: | COVER, BUFFER |
| Парткод: | FF6-0156-000 |
| Деталь: | STIRRER, 2 |
| Парткод: | FF6-0157-000 |
| Деталь: | SENSOR, TONER |
| Парткод: | FH7-7422-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1594-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1212-000 |
| Деталь: | ROLLER, 1 |
| Парткод: | FS5-6448-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FS6-0552-000 |
| Деталь: | GEAR, 26T |
| Парткод: | FS6-0579-000 |
| Деталь: | GEAR, 14T |
| Парткод: | FS6-0592-000 |
| Деталь: | GEAR, 28T |
| Парткод: | FS7-0717-000 |
| Деталь: | GEAR, 15T/48T |
| Парткод: | FS7-0718-000 |
| Деталь: | GEAR, 17T/48T |
| Парткод: | FS7-0719-000 |
| Деталь: | GEAR, 15T/65T |
| Парткод: | FS7-0720-000 |
| Деталь: | GEAR, 40T |
| Парткод: | FS7-0721-000 |
| Деталь: | GEAR, 20T/48T |
| Парткод: | FS7-0754-000 |
| Деталь: | GEAR, 15T/43T |
| Парткод: | FS7-0755-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2405-000 |
| Деталь: | SEAL, OIL |
| Парткод: | X71-9310-000 |
| Деталь: | SCREW,M3X4 |
| Парткод: | XA9-0714-000 |
| Деталь: | DEVELOPING CYLINDER UNIT |
| Парткод: | FG9-3913-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0131-000 |
| Деталь: | SEAL, OIL |
| Парткод: | XG9-0111-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0218-000 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0262-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X8 |
| Парткод: | XB1-2300-805 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X8 |
| Парткод: | XB4-7300-809 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X16 |
| Парткод: | XB4-7301-609 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-802 |
| Деталь: | DEVELOPING ASSEMBLY |
| Парткод: | FG9-3917-000 |
| Деталь: | PAPER PICK-UP PCB ASSEMBLY |
| Парткод: | FG6-0455-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH9-0585-000 |
| Деталь: | FUSE, 125V, 2.5A |
| Парткод: | VD7-0792-501 |
| Деталь: | IC, MTD2003B-4102, DRIVER |
| Парткод: | FH4-6002-000 |
| Деталь: | LEVER, STOP |
| Парткод: | FB1-7099-020 |
| Деталь: | COVER, LEVER |
| Парткод: | FB1-7190-000 |
| Деталь: | CAM, PRESSURE |
| Парткод: | FB5-4821-000 |
| Деталь: | LOWER PLATE, FEEDER DRIVE |
| Парткод: | FF6-0141-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | FH6-1848-000 |
| Деталь: | SCREW,STEPPED,M4 |
| Парткод: | FS1-9005-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS5-2331-000 |
| Деталь: | GEAR, 21T/28T |
| Парткод: | FS7-0702-000 |
| Деталь: | GEAR, 39T |
| Парткод: | FS7-0703-000 |
| Деталь: | GEAR, 23T/70T |
| Парткод: | FS7-0704-000 |
| Деталь: | UPPER PLATE FEEDER DRIVE ASSY |
| Парткод: | FG9-3987-000 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-609 |
| Деталь: | SCREW,CT,M4X16 |
| Парткод: | XB5-2401-609 |
| Деталь: | SCREW,TP,M3X6 |
| Парткод: | XB6-7300-609 |
| Деталь: | FIXING FEEDER DRIVE ASSEMBLY |
| Парткод: | FG6-5703-000 |
| Деталь: | CORD, POWER SUPPLY |
| Парткод: | FH2-5761-020 |
| Деталь: | POWER CORD |
| Парткод: | FH2-6941-00G |
| Деталь: | HANDLE, RIGHT REAR |
| Парткод: | FB5-5193-000 |
| Деталь: | CABLE, AC SOCKET |
| Парткод: | FF3-4194-000 |
| Деталь: | BREAKER, CIRCUIT |
| Парткод: | FH7-7527-000 |
| Деталь: | FUSE, 1A, 250V |
| Парткод: | VD7-0641-001 |
| Деталь: | POWER CORD |
| Парткод: | FH2-5763-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X20 |
| Парткод: | XB1-2402-009 |
| Деталь: | SCREW,W/WASHER,M4X6 |
| Парткод: | XB2-7400-607 |
| Деталь: | POWER CORD TERMINAL ASSEMBLY |
| Парткод: | FG6-5782-000 |
| Деталь: | RING, RETAINING |
| Парткод: | FA4-1159-000 |
| Деталь: | WIRE |
| Парткод: | FB1-8439-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FB1-8581-000 |
| Деталь: | HANDLE, RIGHT DOOR |
| Парткод: | FB3-2812-000 |
| Деталь: | ARM, MULTI FEED, 1 |
| Парткод: | FB3-2815-000 |
| Деталь: | COVER, MULTI FEED ROLLER |
| Парткод: | FB6-2788-000 |
| Деталь: | BUSHING |
| Парткод: | FB3-2821-000 |
| Деталь: | FLAG, PAPER SENSOR, 2 |
| Парткод: | FB3-2833-000 |
| Деталь: | PLATE, GROUNDING, MULTIROLLER |
| Парткод: | FB3-2834-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB3-2835-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB4-3170-000 |
| Деталь: | HOOK, RIGHT DOOR |
| Парткод: | FB6-2785-000 |
| Деталь: | ARM, CAM FOLLOWER |
| Парткод: | FB6-2786-000 |
| Деталь: | DOOR, RIGHT |
| Парткод: | FB5-4733-000 |
| Деталь: | DOOR, RIGHT UPPER |
| Парткод: | FB5-4766-000 |
| Деталь: | FLAG, MULTI PAPER SENSOR |
| Парткод: | FB5-5145-000 |
| Деталь: | PANEL, RIGHT DOOR BLANKING |
| Парткод: | FB5-5194-000 |
| Деталь: | GUIDE, INNER |
| Парткод: | FB5-5195-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB5-5199-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FB5-5200-020 |
| Деталь: | ARM, MULTI FEED |
| Парткод: | FE5-4132-000 |
| Деталь: | GUIDE, MULTI FEED |
| Парткод: | FF6-0101-000 |
| Деталь: | BLOCK, ROLLER |
| Парткод: | FS5-1598-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1950-000 |
| Деталь: | GEAR, 19T |
| Парткод: | FS7-0761-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2337-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2790-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2791-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2406-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD9-0104-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0134-000 |
| Деталь: | BEARING, BALL, UGF106P12ZZD4ML |
| Парткод: | XG9-0407-000 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XA9-0605-000 |
| Деталь: | SHEET, MANUAL FEED PLATE |
| Парткод: | FB1-8584-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X8 |
| Парткод: | XB1-2400-809 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2160-162 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-602 |
| Деталь: | RIGHT DOOR ASSEMBLY |
| Парткод: | FG6-5648-000 |
| Деталь: | PANEL, RIGHT LOWER |
| Парткод: | FB5-4769-000 |
| Деталь: | PANEL, PRINTER, UPPER |
| Парткод: | FB5-5055-000 |
| Деталь: | PANEL, SUPPORT, LEFT |
| Парткод: | FB5-5058-000 |
| Деталь: | PANEL, INTERNAL, REAR |
| Парткод: | FB5-5063-000 |
| Деталь: | PANEL, LEFT SUPPORT, REAR |
| Парткод: | FB5-5182-000 |
| Деталь: | PANEL, PAPER DELIVERY |
| Парткод: | FB5-5186-030 |
| Деталь: | PIN, HINGE |
| Парткод: | FB3-2224-000 |
| Деталь: | LEFT PANEL, MIDDLE |
| Парткод: | FB5-5266-020 |
| Деталь: | LEFT PANEL, REAR |
| Парткод: | FB5-5267-000 |
| Деталь: | PLATE, BLANKING |
| Парткод: | FB5-4731-000 |
| Деталь: | RIGHT PANEL, FRONT |
| Парткод: | FB5-4741-030 |
| Деталь: | RIGHT PANEL, MIDDLE |
| Парткод: | FB5-4767-000 |
| Деталь: | LINK, TRAY |
| Парткод: | FB5-4772-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2404-000 |
| Деталь: | RIGHT PANEL, REAR |
| Парткод: | FB5-4768-000 |
| Деталь: | PANEL, FRONT |
| Парткод: | FG6-5736-000 |
| Деталь: | PLATE, SWITCH SHAFT PRESSURE |
| Парткод: | FB5-5053-000 |
| Деталь: | PLATE, SHUTTER LEVER PRESSURE |
| Парткод: | FB5-5067-000 |
| Деталь: | PLATE, INTERLOCK |
| Парткод: | FB5-5069-000 |
| Деталь: | PLATE, CATCH, LEFT |
| Парткод: | FB5-5070-000 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XA9-0605-000 |
| Деталь: | BRUSH, CLEANING |
| Парткод: | FB4-5380-000 |
| Деталь: | CASE, SERVICE |
| Парткод: | FB5-5052-000 |
| Деталь: | MIRROR CLEANING TOOL |
| Парткод: | FF6-0074-020 |
| Деталь: | COVER, BLANKING, REAR |
| Парткод: | FB1-7157-000 |
| Деталь: | PANEL, REAR |
| Парткод: | FB5-5061-000 |
| Деталь: | COVER, RUBBER |
| Парткод: | FB6-2852-000 |
| Деталь: | SCREW,STEPPED,RS,M4 |
| Парткод: | FS5-9661-000 |
| Деталь: | PANEL, WASTE TONER |
| Парткод: | FB5-5057-000 |
| Деталь: | SPACER, SCREW RETAINER |
| Парткод: | XD9-0206-000 |
| Деталь: | TABLE, DOCUMENT, UPPER |
| Парткод: | FB1-7737-000 |
| Деталь: | TABLE, DOCUMENT, LOWER |
| Парткод: | FB1-7738-000 |
| Деталь: | SUPPORT, COPY TRAY |
| Парткод: | FB5-9806-000 |
| Деталь: | SCREW, RS STEPPED, M4 |
| Парткод: | XA9-1301-000 |
| Деталь: | TRAY, DOCUMENT |
| Парткод: | FB4-5933-000 |
| Деталь: | TRAY, PAPER DELIVERY AUXILIARY |
| Парткод: | FB5-5143-000 |
| Деталь: | PANEL, PAPER DELIVERY |
| Парткод: | FB5-4859-000 |
| Деталь: | GUIDE, PAPER DELIVERY |
| Парткод: | FB5-4860-000 |
| Деталь: | LABEL, WARNING LASER |
| Парткод: | RS6-8382-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4433-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4434-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4435-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-4436-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5907-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5908-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5909-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5910-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5911-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5912-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5913-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5914-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5915-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5916-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5917-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5918-000 |
| Деталь: | EMBLEM |
| Парткод: | FB6-5927-000 |
| Деталь: | SCREW,W/WASHER,M4X8 |
| Парткод: | XA9-0266-000 |
| Деталь: | LABEL, |
| Парткод: | RS6-8382-000 |
| Деталь: | PLATE, BLANKING |
| Парткод: | FB5-5068-000 |
| Деталь: | COVER, PAPER PICK-UP, LOWER |
| Парткод: | FB3-2381-000 |
| Деталь: | PANEL, UPPER |
| Парткод: | FB5-5066-000 |
| Деталь: | COVER, CONNECTOR, 1 |
| Парткод: | FH2-5824-000 |
| Деталь: | LABEL |
| Парткод: | FB5-0332-000 |
| Деталь: | EXTERNAL COVERS, PANELS, ETC |
| Парткод: | NPN |
| Деталь: | CONTROL PANEL CPU PCB ASSEMBLY |
| Парткод: | FG3-1795-000 |
| Деталь: | IC, N010-0559-V123, MPU |
| Парткод: | FH4-1380-000 |
| Деталь: | LINK, PAPER FULL SENSOR |
| Парткод: | FB5-4853-000 |
| Деталь: | ARM, SENSOR |
| Парткод: | FB5-4854-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FF6-0132-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB5-4858-000 |
| Деталь: | RUBBER, NOISE PREVENTION |
| Парткод: | FB5-5150-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1943-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FS7-2390-000 |
| Деталь: | DELIVERY COLLAR UNIT |
| Парткод: | FF6-0345-000 |
| Деталь: | SCREW,P,M4X8 |
| Парткод: | XA9-0605-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | FH6-1850-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7557-000 |
| Деталь: | GEAR, 21T |
| Парткод: | FS7-0746-000 |
| Деталь: | GEAR, 17T/27T |
| Парткод: | FS7-0747-000 |
| Деталь: | CABLE, PAPER DELIVERY |
| Парткод: | FG3-1598-000 |
| Деталь: | ROLLER, PAPER DELIVERY |
| Парткод: | FB5-4855-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FS7-0745-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD9-0104-000 |
| Деталь: | ROLLER, VERTICAL PATH |
| Парткод: | FB5-4856-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1202-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FS7-0744-000 |
| Деталь: | PAD, NOISE PREVENTION |
| Парткод: | FB5-9787-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-004 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X8 |
| Парткод: | XB1-2300-805 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | PAPER DELIVERY ASSEMBLY |
| Парткод: | FG6-5691-000 |
| Деталь: | COVER, AUXILIARY |
| Парткод: | FB5-5144-000 |
| Деталь: | COVER, FIXING CONNECTOR |
| Парткод: | FB5-5155-000 |
| Деталь: | HANDLE, RIGHT FRONT |
| Парткод: | FB5-5185-000 |
| Деталь: | COVER, INTERNAL |
| Парткод: | FF6-0107-000 |
| Деталь: | GUIDE, PAPER DELIVERY |
| Парткод: | FF6-0138-000 |
| Деталь: | FEEDER ENGAGEMENT HANDLE UNIT |
| Парткод: | FG6-0561-000 |
| Деталь: | MOUNT, DOOR SWITCH |
| Парткод: | FB4-3061-000 |
| Деталь: | SWITCH, INTERLOCK |
| Парткод: | WC8-5178-000 |
| Деталь: | CABLE, DOOR SWITCH, AC |
| Парткод: | FG3-1602-000 |
| Деталь: | SHAFT, DOOR SWITCH |
| Парткод: | FB4-3062-000 |
| Деталь: | BLOCK, SWITCH PRESSURE |
| Парткод: | FB4-3063-000 |
| Деталь: | BLOCK, SHAFT PRESSURE |
| Парткод: | FB4-3064-000 |
| Деталь: | HOLDER, DOOR SWITCH, REAR |
| Парткод: | FB4-3065-000 |
| Деталь: | HOLDER, DOOR SWITCH, FRONT |
| Парткод: | FB4-3066-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2784-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2411-000 |
| Деталь: | FILTER, PRECONDITION. EXPOSURE |
| Парткод: | FB3-2765-000 |
| Деталь: | PRECONDITIONING LAMP PCB UNIT |
| Парткод: | FG5-6297-000 |
| Деталь: | MAGNET CATCH |
| Парткод: | XZ9-0527-000 |
| Деталь: | MAGNET CATCH |
| Парткод: | XZ9-0526-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | LABEL,WARNING,HIGH VOLTAGE |
| Парткод: | FB5-0333-000 |
| Деталь: | LABEL, TONER |
| Парткод: | FS6-8992-000 |
| Деталь: | LABEL, CAUTION LASER |
| Парткод: | FB5-0281-000 |
| Деталь: | DAMPER, PAPER FEED |
| Парткод: | FB5-4839-000 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | SCREW,W/WASHER,M3X8 |
| Парткод: | XB2-8300-807 |
| Деталь: | INTERNAL COMPONENTS 1 |
| Парткод: | NPN |
| Деталь: | FLANGE, BELT, 2 |
| Парткод: | FB5-5032-000 |
| Деталь: | COVER, PICK-UP DRIVE SHAFT |
| Парткод: | FB5-5048-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB5-5098-000 |
| Деталь: | COVER, CONNECTOR |
| Парткод: | FB5-5264-000 |
| Деталь: | JOINT, PIPE |
| Парткод: | FF6-0244-000 |
| Деталь: | COVER, CONNECTOR |
| Парткод: | FH2-6552-000 |
| Деталь: | SWITCHING REGULATOR PCB ASSY |
| Парткод: | FH3-2613-000 |
| Деталь: | SWITCHING REGULATOR PCB ASSY |
| Парткод: | FH3-2614-000 |
| Деталь: | SWITCHING REGULATOR PCB ASSY |
| Парткод: | FH3-2615-000 |
| Деталь: | SWITCHING REGULATOR PCB ASSY |
| Парткод: | FH3-2616-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2385-000 |
| Деталь: | CABLE, POWER SUPPLY LATTICE |
| Парткод: | FG3-1995-000 |
| Деталь: | THERMISTOR PCB ASSEMBLY |
| Парткод: | FG3-1608-000 |
| Деталь: | CABLE, THERMISTOR POWER SUPPLY |
| Парткод: | FG3-1616-000 |
| Деталь: | SUPPORT, CORD |
| Парткод: | FB3-2596-000 |
| Деталь: | CONNECTOR, HV TRANSFER |
| Парткод: | FB5-4826-000 |
| Деталь: | SPRING UNIT, CONTACT |
| Парткод: | FB5-4827-000 |
| Деталь: | SPRING UNIT, CONTACT |
| Парткод: | FB5-4828-000 |
| Деталь: | SPRING UNIT, CONTACT |
| Парткод: | FB5-4829-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | DRUM SENSOR UNIT |
| Парткод: | FG3-0133-000 |
| Деталь: | CABLE, TRANSFER GUIDE, HV |
| Парткод: | FG3-1624-000 |
| Деталь: | CABLE, TRANSFER, HV |
| Парткод: | FG3-1625-000 |
| Деталь: | CABLE, STATIC ELIMINATOR, HV |
| Парткод: | FG3-1626-000 |
| Деталь: | HDD, MK6017MAP |
| Парткод: | WM2-5160-000 |
| Деталь: | HDD, IC25N010ATDA04-0 |
| Парткод: | WM2-5166-000 |
| Деталь: | CENTRO PCB ASSEMBLY |
| Парткод: | FG3-1744-020 |
| Деталь: | LID, SLIDE |
| Парткод: | FB5-5014-000 |
| Деталь: | RAIL, WASTE TONER SENSOR |
| Парткод: | FF6-0166-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-004 |
| Деталь: | WASTE TONER SENSOR PCB ASSY |
| Парткод: | FM5-5153-000 |
| Деталь: | BOTTLE, WASTE TONER |
| Парткод: | FG6-5815-000 |
| Деталь: | LABEL,WARNING,HIGH VOLTAGE |
| Парткод: | FB5-0339-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,TP,M4X8 |
| Парткод: | XB6-7400-807 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-407 |
| Деталь: | SCREW,TP,M3X4 |
| Парткод: | XB6-7300-407 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | SCREW,W/WASHER,M4X6 |
| Парткод: | XB2-7400-607 |
| Деталь: | MACHINE REAR PLATE |
| Парткод: | NPN |
| Деталь: | GUIDE, PAPER FEEDER |
| Парткод: | FB5-4782-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4783-000 |
| Деталь: | ARM, TRANSFER |
| Парткод: | FB5-4785-000 |
| Деталь: | PIN, POSITIONING |
| Парткод: | FB5-4787-000 |
| Деталь: | TERMINAL PLATE, TRANSFER GUIDE |
| Парткод: | FB5-4788-000 |
| Деталь: | TERMINAL PLATE, TRANSFER |
| Парткод: | FB5-4789-000 |
| Деталь: | TERMINAL PLATE, ELIMINATOR |
| Парткод: | FB5-4790-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB5-4791-000 |
| Деталь: | ARM, SHUTTER |
| Парткод: | FB5-4793-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4794-000 |
| Деталь: | SHEET, GUIDE |
| Парткод: | FB5-4795-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4796-000 |
| Деталь: | HOOK, RIB STOP |
| Парткод: | FB5-4798-000 |
| Деталь: | SHAFT, LIFTER, REAR |
| Парткод: | FB5-4832-000 |
| Деталь: | SPACER, SCREW |
| Парткод: | FB5-4835-000 |
| Деталь: | VARISTOR UNIT |
| Парткод: | FF3-1173-000 |
| Деталь: | CABLE, TOP SENSOR |
| Парткод: | FF3-4179-000 |
| Деталь: | GUIDE, TRANSFER, LOWER |
| Парткод: | FF6-0105-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2382-000 |
| Деталь: | GUIDE, TOP SENSOR |
| Парткод: | FB5-4799-000 |
| Деталь: | LINK, TOP SENSOR |
| Парткод: | FB5-4800-000 |
| Деталь: | HOLDER, TOP SENSOR |
| Парткод: | FB5-4801-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4802-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7557-000 |
| Деталь: | BUSHING |
| Парткод: | FA1-0056-000 |
| Деталь: | ROLLER, PRE-TRANSFER, LOWER |
| Парткод: | FB5-4804-000 |
| Деталь: | ROLLER, PRE-TRANSFER, UPPER |
| Парткод: | FB5-4805-000 |
| Деталь: | KNOB, PRE-TRANSFER ROLLER |
| Парткод: | FB5-4808-000 |
| Деталь: | BRACKET, PRE-TRANSFER GUIDE |
| Парткод: | FB5-4813-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4833-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4834-000 |
| Деталь: | BUSHING, REGIST. ROLLER |
| Парткод: | FE5-4046-000 |
| Деталь: | GUIDE, TRANSFER, UPPER |
| Парткод: | FF6-0106-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS2-2783-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1944-000 |
| Деталь: | GEAR, 32T |
| Парткод: | FS7-0739-000 |
| Деталь: | GEAR, 26T |
| Парткод: | FS7-0740-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2383-000 |
| Деталь: | ROLLER, TRANSFER |
| Парткод: | FF6-0104-000 |
| Деталь: | ARM, TRANSFER, FRONT |
| Парткод: | FB5-4786-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FF5-7246-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | PULLEY, 24T |
| Парткод: | FS5-3820-000 |
| Деталь: | SHEET, TRANSFER |
| Парткод: | FB5-4811-000 |
| Деталь: | SHEET, TRANSFER AUXILIARY |
| Парткод: | FB5-4814-000 |
| Деталь: | SHEET, TRANSFER |
| Парткод: | FB5-4812-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M4X18 |
| Парткод: | XB1-2401-809 |
| Деталь: | SCREW,W/WASHER,M4X8 |
| Парткод: | XB2-8400-809 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-605 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M4X8 |
| Парткод: | XB4-7400-809 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-322 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD3-2160-102 |
| Деталь: | PAPER FEEDER ASSEMBLY |
| Парткод: | FG6-5670-000 |
| Деталь: | CABLE, CC-4 |
| Парткод: | FF3-4199-000 |
| Деталь: | RAIL, GUIDE |
| Парткод: | RB1-7067-000 |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-2232-060 |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-2492-000 |
| Деталь: | CENTRO PCB ASSEMBLY |
| Парткод: | FG3-1744-020 |
| Деталь: | CABLE, FLAT, HD |
| Парткод: | FF3-4191-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FG3-1994-000 |
| Деталь: | CORE, FERRITE |
| Парткод: | WE8-5925-000 |
| Деталь: | CABLE, POWER SUPPLY |
| Парткод: | FG3-2238-000 |
| Деталь: | DIFFERENTIAL PCB ASSEMBLY |
| Парткод: | FG6-5831-000 |
| Деталь: | DIMM, SMS-6486M-H, SD-RAM |
| Парткод: | WA7-2376-000 |
| Деталь: | DIMM,M366S1723DTS-C7A,SDRAM |
| Парткод: | WA7-2322-000 |
| Деталь: | DIMM, MT16LSDT3264AG-133E1 |
| Парткод: | WA7-2372-000 |
| Деталь: | BATTERY,LITHIUM,CR2477-HE4H,3V |
| Парткод: | WK1-5019-000 |
| Деталь: | ETHERNET BOARD PCB ASSEMBLY |
| Парткод: | FG6-5964-000 |
| Деталь: | RISER BOARD PCB ASSEMBLY |
| Парткод: | FG6-5795-000 |
| Деталь: | LIPS BOARD PCB ASSEMBLY |
| Парткод: | FG3-2959-000 |
| Деталь: | DIMM ASSY |
| Парткод: | FH5-3127-000 |
| Деталь: | PLATE, PCB FIXING |
| Парткод: | FB5-6612-000 |
| Деталь: | CD-ROM, USER SOFTWARE230V |
| Парткод: | FG3-2478-000 |
| Деталь: | CD-ROM, USER SOFTWARE |
| Парткод: | FG3-2772-000 |
| Деталь: | CD-ROM, USER SOFT WEAR US/UK |
| Парткод: | FH5-3378-000 |
| Деталь: | CD-ROM, N/W SCANGEAR |
| Парткод: | FG3-2484-000 |
| Деталь: | CD-ROM, N/W SCAN GEAR |
| Парткод: | FH5-3381-000 |
| Деталь: | CD-ROM, FAX DRIVER |
| Парткод: | FG3-3057-000 |
| Деталь: | SHORT CONNECTOR |
| Парткод: | FF3-4219-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-607 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M4X8 |
| Парткод: | XB4-7400-807 |
| Деталь: | CONTROLLER BOX ASSEMBLY |
| Парткод: | NPN |
| Деталь: | IC, M38871M2-010GP, MCU |
| Парткод: | FH4-6123-000 |
| Деталь: | IC, GATE ARRAY |
| Парткод: | FH4-6145-000 |
| Деталь: | IC, SLA902FM2J, GATE ARRAY |
| Парткод: | FH4-6085-000 |
| Деталь: | CABLE, LASER |
| Парткод: | FG3-1592-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | LABEL, WARNING LASER |
| Парткод: | RS6-8382-000 |
| Деталь: | SCANNER ASSEMBLY |
| Парткод: | FG6-5633-000 |
| Деталь: | GUIDE, INLET, UPPER |
| Парткод: | FB5-4923-000 |
| Деталь: | ROLLER, FIXING DELIVERY |
| Парткод: | FB5-4925-000 |
| Деталь: | GUIDE, FIXING DELIVERY, UPPER |
| Парткод: | FB5-4926-000 |
| Деталь: | COLLAR, FIXING DELIVERY |
| Парткод: | FB5-4927-000 |
| Деталь: | GUIDE, FIXING DELIVERY, LOWER |
| Парткод: | FB5-4928-000 |
| Деталь: | COVER, FILM SENSOR |
| Парткод: | FB5-4934-000 |
| Деталь: | MOUNT, FILM BIAS |
| Парткод: | FB5-4938-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB5-4940-000 |
| Деталь: | GUIDE, INLET |
| Парткод: | FB5-4941-000 |
| Деталь: | ROLLER, PRESSURE |
| Парткод: | FB5-4942-000 |
| Деталь: | RIB, FIXING GUIDE, LOWER |
| Парткод: | FB5-4943-000 |
| Деталь: | ELIMINATOR, STATIC CHARGE |
| Парткод: | FB5-5148-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | GEAR, 17T/19T |
| Парткод: | FS7-0708-000 |
| Деталь: | GEAR, 27T |
| Парткод: | FS7-0709-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2373-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2374-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2375-000 |
| Деталь: | RUBBER |
| Парткод: | RB2-1920-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | RB2-1929-000 |
| Деталь: | PIN |
| Парткод: | RB2-1930-000 |
| Деталь: | LEVER, SENSOR |
| Парткод: | FB6-2860-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | RB2-1947-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | RB2-4389-000 |
| Деталь: | RESISTOR, 68MOHM, 1/2W |
| Парткод: | RH5-3058-000 |
| Деталь: | BUSHING |
| Парткод: | RS1-1087-000 |
| Деталь: | BUSHING |
| Парткод: | RS5-1446-000 |
| Деталь: | GEAR, 15T |
| Парткод: | RS6-0354-000 |
| Деталь: | NUT, PUSH |
| Парткод: | XA9-0134-000 |
| Деталь: | SCREW,M3 |
| Парткод: | XA9-0702-000 |
| Деталь: | CABLE, FIXING, DC |
| Парткод: | FG3-1600-000 |
| Деталь: | CLEANING ROLLER ASSEMBLY |
| Парткод: | FG6-5709-000 |
| Деталь: | FIXING FILM SENSOR PCB ASSY |
| Парткод: | FG6-5710-000 |
| Деталь: | FIXING FILM ASSEMBLY |
| Парткод: | FG6-5712-000 |
| Деталь: | FIXING FILM ASSEMBLY |
| Парткод: | FG6-6039-000 |
| Деталь: | FIXING FILM ASSEMBLY |
| Парткод: | FG6-6041-000 |
| Деталь: | SHEET, FIXING |
| Парткод: | FB5-4929-000 |
| Деталь: | SHEET, FIXING, 2 |
| Парткод: | FB5-4948-000 |
| Деталь: | REINFORCEMENT, FIXING GUIDE |
| Парткод: | FB5-4944-000 |
| Деталь: | LABEL,WARNING,HIGH VOLTAGE |
| Парткод: | FB5-0339-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | PLATE, CLEANING ROLLER |
| Парткод: | FB5-4930-000 |
| Деталь: | ROLLER, FIXING HEATSINK |
| Парткод: | FB5-4931-000 |
| Деталь: | MOUNT, CLEANING ROLLER |
| Парткод: | FB5-4932-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1945-000 |
| Деталь: | LABEL, CAUTION |
| Парткод: | FS7-8267-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS6-2192-000 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-6038-000 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-6040-000 |
| Деталь: | FIXING ASSEMBLY |
| Парткод: | FG6-5702-000 |
| Деталь: | TRANSFORMER, INVERTER |
| Парткод: | FH3-0961-000 |
| Деталь: | FUSE, 60V, 2A |
| Парткод: | VD7-1622-001 |
| Деталь: | C. PANEL INVERTER PCB ASSEMBLY |
| Парткод: | FG6-7738-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-2776-000 |
| Деталь: | PLATE, LIFTER |
| Парткод: | FB6-2777-000 |
| Деталь: | GEAR, RATCHET |
| Парткод: | FB6-2778-000 |
| Деталь: | LEVER, LIFTER, UPPER |
| Парткод: | FB6-2779-000 |
| Деталь: | LEVER, LIFTER, LOWER |
| Парткод: | FB6-2780-000 |
| Деталь: | CLAW, LIFTER LOCK |
| Парткод: | FB6-2781-000 |
| Деталь: | FLAG, PAPER SENSOR, UPPER |
| Парткод: | FB6-2782-000 |
| Деталь: | FLAG, PAPER SENSOR, LOWER |
| Парткод: | FB6-2783-000 |
| Деталь: | GUIDE, LOWER CASSETTE |
| Парткод: | FB3-2894-020 |
| Деталь: | PLATE, BELT SUPPORT |
| Парткод: | FB3-2896-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2413-000 |
| Деталь: | GUIDE, UPPER CASSETTE |
| Парткод: | FB3-2897-020 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB3-2898-020 |
| Деталь: | MOUNT, SENSOR |
| Парткод: | FB4-2817-000 |
| Деталь: | FLAG, RETRY SENSOR |
| Парткод: | FB4-3343-020 |
| Деталь: | CAM, LIFT UP, UPPER |
| Парткод: | FB6-2787-020 |
| Деталь: | CAM, LIFT UP, LOWER |
| Парткод: | FB5-9802-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB4-5349-000 |
| Деталь: | CLAW, LIFTER ARM |
| Парткод: | FB6-2789-020 |
| Деталь: | ARM, LIFTER, UPPER |
| Парткод: | FB5-9794-000 |
| Деталь: | ARM, LIFTER, LOWER |
| Парткод: | FB6-2790-000 |
| Деталь: | LEVER, LOCK, UPPER |
| Парткод: | FB5-9795-000 |
| Деталь: | LEVER, PICK LOCK, LOWER |
| Парткод: | FB6-2792-000 |
| Деталь: | COVER, PAPER PICK-UP FRAME |
| Парткод: | FB5-4728-000 |
| Деталь: | ROLLER, PAPER FEED, UPPER |
| Парткод: | FB5-4779-000 |
| Деталь: | ROLLER, PAPER FEED, LOWER |
| Парткод: | FB5-4780-000 |
| Деталь: | CAM, PICK-UP ROLLER, UPPER |
| Парткод: | FB5-5286-000 |
| Деталь: | CAM, PICK-UP ROLLER, LOWER |
| Парткод: | FB5-5287-000 |
| Деталь: | CABLE, UPPER RETRY SENSOR |
| Парткод: | FF3-2974-000 |
| Деталь: | CABLE, LOWER RETRY SENSOR |
| Парткод: | FF3-2975-000 |
| Деталь: | CABLE, VERTICAL PATH CLUTCH |
| Парткод: | FF3-4175-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FF5-4552-020 |
| Деталь: | ROLLER, PAPER SEPARATION |
| Парткод: | FF5-4634-020 |
| Деталь: | ARM, TENSION |
| Парткод: | FF6-0100-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | FH6-1477-000 |
| Деталь: | CLUTCH, ELECTRO MAGNETIC |
| Парткод: | FH6-5005-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5020-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1589-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1946-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1948-000 |
| Деталь: | PULLEY, 32T/40T |
| Парткод: | FS5-3620-000 |
| Деталь: | PULLEY, 25T/GEAR, 28T |
| Парткод: | FS5-3830-000 |
| Деталь: | PULLEY, 24T |
| Парткод: | FS5-3833-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS6-0564-000 |
| Деталь: | GEAR, 42T |
| Парткод: | FS6-0565-000 |
| Деталь: | GEAR, 14T |
| Парткод: | FS7-0758-000 |
| Деталь: | GEAR, 35T/44T |
| Парткод: | FS7-0756-000 |
| Деталь: | SCREW,STEPPED,M3X2.2 |
| Парткод: | FS1-9010-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2414-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2328-020 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2330-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2331-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2900-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS7-0103-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FS7-0104-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS7-0757-000 |
| Деталь: | GEAR, 86T |
| Парткод: | FS7-0752-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2408-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2409-000 |
| Деталь: | DAMPER |
| Парткод: | RB1-6539-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | FB6-5091-000 |
| Деталь: | GEAR, 3T |
| Парткод: | RB1-6592-000 |
| Деталь: | BEARING, BALL, UGF106P12ZZD4ML |
| Парткод: | XG9-0407-000 |
| Деталь: | SCREW,M3X8 |
| Парткод: | XA9-0591-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD9-0104-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0131-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0137-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF2-1121-540 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0403-000 |
| Деталь: | ROLLER, VERTICAL PATH, 1 |
| Парткод: | FB5-4776-000 |
| Деталь: | CLUTCH, ONE-WAY |
| Парткод: | FB5-4777-000 |
| Деталь: | HOLDER, ROLLER, UPPER |
| Парткод: | FF6-0108-000 |
| Деталь: | HOLDER, ROLLER, LOWER |
| Парткод: | FF6-0109-000 |
| Деталь: | ARM, LIFTER SUPPORT |
| Парткод: | FB6-4577-000 |
| Деталь: | PLATE, NO4 |
| Парткод: | FA9-3948-000 |
| Деталь: | PLATE, NO2 |
| Парткод: | FA9-3949-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-215 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-800 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-802 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1200-122 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-402 |
| Деталь: | PAPER PICK-UP MOUNT ASSEMBLY |
| Парткод: | NPN |
| Деталь: | PLATE, TERMINAL |
| Парткод: | FB5-5257-000 |
| Деталь: | LINK, DRIVE |
| Парткод: | FB5-5258-000 |
| Деталь: | FAN |
| Парткод: | FH6-1852-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5048-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-002 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | CABLE, HV EXHAUST |
| Парткод: | FG3-1615-000 |
| Деталь: | LABEL,WARNING,HIGH VOLTAGE |
| Парткод: | FB5-0339-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M4X35 |
| Парткод: | XB4-7403-509 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1300-102 |
| Деталь: | MACHINE EXHAUST FAN ASSEMBLY |
| Парткод: | FG6-5814-050 |
| Деталь: | DUCT, LASER SCANNER |
| Парткод: | FB5-5159-000 |
| Деталь: | DUCT, CARTRIDGE |
| Парткод: | FB5-5173-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2380-000 |
| Деталь: | SCREW,STEPPED,M4 |
| Парткод: | FS5-9663-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2410-000 |
| Деталь: | SCREW,W/WASHER,M4X10 |
| Парткод: | XA9-1289-000 |
| Деталь: | LASER SHUTTER LEVER UNIT |
| Парткод: | FF6-0245-000 |
| Деталь: | SHIELD, LASER CABLE |
| Парткод: | FB5-4820-000 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | INTERNAL COMPONENTS 4 |
| Парткод: | NPN |
| Деталь: | WIRE, DELIVERY SUPPORT |
| Парткод: | FB1-6841-000 |
| Деталь: | PANEL, PAPER DELIVERY |
| Парткод: | FB5-4911-000 |
| Деталь: | GUIDE, PAPER DELIVERY |
| Парткод: | FB5-4912-000 |
| Деталь: | ROLLER, DELIVERY DUPLEXING |
| Парткод: | FB5-4919-000 |
| Деталь: | FAN |
| Парткод: | FH6-1854-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1202-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1943-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FS7-0701-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2372-000 |
| Деталь: | GEAR, 18T |
| Парткод: | RA9-1124-000 |
| Деталь: | GEAR, 19T |
| Парткод: | FB6-2767-000 |
| Деталь: | SHAFT, GEAR |
| Парткод: | RB1-6653-000 |
| Деталь: | LEVER, SWING |
| Парткод: | FB6-2768-000 |
| Деталь: | LEVER, DELIVERY COVER |
| Парткод: | FB6-2769-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RS5-2489-000 |
| Деталь: | CABLE, CURL CORRECT FAN |
| Парткод: | FG3-1599-000 |
| Деталь: | CAP, SPRING |
| Парткод: | FB4-3104-000 |
| Деталь: | DEFLECTOR, DELIVERY INLET |
| Парткод: | FB5-4914-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4915-000 |
| Деталь: | COLLAR, DUPLEXING INLET |
| Парткод: | FB5-5260-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-5261-000 |
| Деталь: | GUIDE, PAPER DELIVERY, LOWER |
| Парткод: | FF6-0139-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2398-000 |
| Деталь: | GUIDE, VERTICAL PATH |
| Парткод: | FB5-4916-000 |
| Деталь: | HOOK, PAPER DELIVERY ROLLER |
| Парткод: | FB5-4918-000 |
| Деталь: | ROLLER, FEED |
| Парткод: | FB5-4920-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | CORE, FERRITE |
| Парткод: | WE8-5857-000 |
| Деталь: | LEFT VERTICAL PATH ASSEMBLY |
| Парткод: | FG6-5698-000 |
| Деталь: | PLATE, STOP DEVELOPING |
| Парткод: | FB3-2206-000 |
| Деталь: | ARM, PRESSURE PLATE |
| Парткод: | FB5-4819-000 |
| Деталь: | HANDLE, PAPER FEEDER |
| Парткод: | FB4-2943-000 |
| Деталь: | SHAFT, HANDLE |
| Парткод: | FB4-2944-000 |
| Деталь: | DAMPER, PAPER FEED |
| Парткод: | FB5-4839-000 |
| Деталь: | PIN, HINGE, PAPER FEEDER |
| Парткод: | FB5-5160-000 |
| Деталь: | GUIDE, PAPER FEEDER HINGE |
| Парткод: | FB5-5192-000 |
| Деталь: | BUSHING |
| Парткод: | FS1-1189-000 |
| Деталь: | BUSHING |
| Парткод: | FS2-1431-000 |
| Деталь: | SCREW,STEPPED,M4 |
| Парткод: | FS5-9210-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2386-000 |
| Деталь: | PLATE, PRESSURE, BIG |
| Парткод: | FB5-4816-000 |
| Деталь: | PLATE, PRESSURE, SMALL |
| Парткод: | FB5-4817-000 |
| Деталь: | SCREW,TP,M4X8 |
| Парткод: | XA9-0700-000 |
| Деталь: | SPACER, DEVELOPING RAIL SLIDE |
| Парткод: | FB5-4976-000 |
| Деталь: | SHIELD, RAIL, UPPER |
| Парткод: | FB5-4979-000 |
| Деталь: | CABLE, TONNER SENSOR |
| Парткод: | FF3-1136-000 |
| Деталь: | MOUNT, ELECTRODE |
| Парткод: | FF5-1458-020 |
| Деталь: | CAM, PRESSURE APPLICATION |
| Парткод: | FB2-3900-030 |
| Деталь: | HANDLE, DEVELOPING PRESSURE |
| Парткод: | FB4-5382-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2387-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FB5-5265-000 |
| Деталь: | HOLDER, PAPER DUST |
| Парткод: | FB5-9567-000 |
| Деталь: | SHAFT, PRESSURE |
| Парткод: | FB5-4975-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,TP,M5X10 |
| Парткод: | XB6-7501-007 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | INTERNAL COMPONENTS 3 |
| Парткод: | NPN |
| Деталь: | DIMM ASSEMBLY |
| Парткод: | FG3-1620-100 |
| Деталь: | BATTERY, 3V, 550 MAH |
| Парткод: | WK1-0084-000 |
| Деталь: | DC CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-1613-090 |
| Деталь: | DC CONTROLLER PCB ASSEMBLY |
| Парткод: | FG3-1612-080 |
| Деталь: | FUSE, 72V, 2A |
| Парткод: | VD7-0602-001 |
| Деталь: | FUSE, 72V, 2.5A |
| Парткод: | VD7-0602-501 |
| Деталь: | IC, M38871M2-010GP, MCU |
| Парткод: | FH4-6123-000 |
| Деталь: | IC, MTD2003B-4101, DRIVER |
| Парткод: | FH4-6001-000 |
| Деталь: | IC, KS4H9U1219WEP, GATE ARRAY |
| Парткод: | FH4-6141-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FB6-2776-000 |
| Деталь: | PLATE, LIFTER |
| Парткод: | FB6-2777-000 |
| Деталь: | GEAR, RATCHET |
| Парткод: | FB6-2778-000 |
| Деталь: | LEVER, LIFTER, UPPER |
| Парткод: | FB6-2779-000 |
| Деталь: | LEVER, LIFTER, LOWER |
| Парткод: | FB6-2780-000 |
| Деталь: | CLAW, LIFTER LOCK |
| Парткод: | FB6-2781-000 |
| Деталь: | FLAG, PAPER SENSOR, UPPER |
| Парткод: | FB6-2782-000 |
| Деталь: | FLAG, PAPER SENSOR, LOWER |
| Парткод: | FB6-2783-000 |
| Деталь: | GUIDE, LOWER CASSETTE |
| Парткод: | FB3-2894-020 |
| Деталь: | PLATE, BELT SUPPORT |
| Парткод: | FB3-2896-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2413-000 |
| Деталь: | GUIDE, UPPER CASSETTE |
| Парткод: | FB3-2897-020 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB3-2898-020 |
| Деталь: | MOUNT, SENSOR |
| Парткод: | FB4-2817-000 |
| Деталь: | FLAG, RETRY SENSOR |
| Парткод: | FB4-3343-020 |
| Деталь: | CAM, LIFT UP, UPPER |
| Парткод: | FB6-2787-020 |
| Деталь: | CAM, LIFT UP, LOWER |
| Парткод: | FB5-9802-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB4-5349-000 |
| Деталь: | CLAW, LIFTER ARM |
| Парткод: | FB6-2789-020 |
| Деталь: | ARM, LIFTER, UPPER |
| Парткод: | FB5-9794-000 |
| Деталь: | ARM, LIFTER, LOWER |
| Парткод: | FB6-2790-000 |
| Деталь: | LEVER, LOCK, UPPER |
| Парткод: | FB5-9795-000 |
| Деталь: | LEVER, PICK LOCK, LOWER |
| Парткод: | FB6-2792-000 |
| Деталь: | COVER, PAPER PICK-UP FRAME |
| Парткод: | FB5-4728-000 |
| Деталь: | ROLLER, PAPER FEED, UPPER |
| Парткод: | FB5-4779-000 |
| Деталь: | ROLLER, PAPER FEED, LOWER |
| Парткод: | FB5-4780-000 |
| Деталь: | CAM, PICK-UP ROLLER, UPPER |
| Парткод: | FB5-5286-000 |
| Деталь: | CAM, PICK-UP ROLLER, LOWER |
| Парткод: | FB5-5287-000 |
| Деталь: | CABLE, UPPER RETRY SENSOR |
| Парткод: | FF3-2974-000 |
| Деталь: | CABLE, LOWER RETRY SENSOR |
| Парткод: | FF3-2975-000 |
| Деталь: | CABLE, VERTICAL PATH CLUTCH |
| Парткод: | FF3-4175-000 |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | FF5-4552-020 |
| Деталь: | ROLLER, PAPER SEPARATION |
| Парткод: | FF5-4634-020 |
| Деталь: | ARM, TENSION |
| Парткод: | FF6-0100-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | FH6-1477-000 |
| Деталь: | CLUTCH, ELECTRO MAGNETIC |
| Парткод: | FH6-5005-000 |
| Деталь: | SOLENOID |
| Парткод: | FH6-5020-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1589-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1946-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1948-000 |
| Деталь: | PULLEY, 32T/40T |
| Парткод: | FS5-3620-000 |
| Деталь: | PULLEY, 25T/GEAR, 28T |
| Парткод: | FS5-3830-000 |
| Деталь: | PULLEY, 24T |
| Парткод: | FS5-3833-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS6-0564-000 |
| Деталь: | GEAR, 42T |
| Парткод: | FS6-0565-000 |
| Деталь: | GEAR, 14T |
| Парткод: | FS7-0758-000 |
| Деталь: | GEAR, 35T/44T |
| Парткод: | FS7-0756-000 |
| Деталь: | SCREW,STEPPED,M3X2.2 |
| Парткод: | FS1-9010-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2414-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2328-020 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2330-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2331-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS6-2900-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS7-0103-000 |
| Деталь: | GEAR, 24T |
| Парткод: | FS7-0104-000 |
| Деталь: | GEAR, 35T |
| Парткод: | FS7-0757-000 |
| Деталь: | GEAR, 86T |
| Парткод: | FS7-0752-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2408-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2409-000 |
| Деталь: | DAMPER |
| Парткод: | RB1-6539-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | FB6-5091-000 |
| Деталь: | GEAR, 3T |
| Парткод: | RB1-6592-000 |
| Деталь: | BEARING, BALL, UGF106P12ZZD4ML |
| Парткод: | XG9-0407-000 |
| Деталь: | SCREW,M3X8 |
| Парткод: | XA9-0591-000 |
| Деталь: | PIN,DOWEL |
| Парткод: | XD9-0104-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0131-000 |
| Деталь: | RING,E |
| Парткод: | XD9-0137-000 |
| Деталь: | BELT, TIMING |
| Парткод: | XF2-1121-540 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0403-000 |
| Деталь: | ROLLER, VERTICAL PATH, 1 |
| Парткод: | FB5-4776-000 |
| Деталь: | CLUTCH, ONE-WAY |
| Парткод: | FB5-4777-000 |
| Деталь: | HOLDER, ROLLER, UPPER |
| Парткод: | FF6-0108-000 |
| Деталь: | HOLDER, ROLLER, LOWER |
| Парткод: | FF6-0109-000 |
| Деталь: | ARM, LIFTER SUPPORT |
| Парткод: | FB6-4577-000 |
| Деталь: | PLATE, NO4 |
| Парткод: | FA9-3948-000 |
| Деталь: | PLATE, NO2 |
| Парткод: | FA9-3949-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | SHIM |
| Парткод: | XD1-1106-215 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-800 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-802 |
| Деталь: | PIN,SPRING |
| Парткод: | XD3-1200-122 |
| Деталь: | RING,GRIP |
| Парткод: | XD2-2100-402 |
| Деталь: | PAPER PICK-UP MOUNT ASSEMBLY |
| Парткод: | NPN |
| Деталь: | HV POWER SUPPLY PCB ASSEMBLY |
| Парткод: | FG3-1604-000 |
| Деталь: | FUSE, 125V, 3.15A |
| Парткод: | VD7-0213-151 |
| Деталь: | FUSE, 250V, 1.6A |
| Парткод: | VD7-0641-601 |
| Деталь: | HV POWER SUPPLY PCB ASSEMBLY |
| Парткод: | FG3-1603-000 |
| Деталь: | CAM, SIZE SENSOR, 2 |
| Парткод: | FB3-2942-000 |
| Деталь: | CAM, SIZE SENSOR, 3 |
| Парткод: | FB3-2943-000 |
| Деталь: | KNOB, SIZE SENSOR |
| Парткод: | FB5-3811-000 |
| Деталь: | CAM, SIZE SENSOR, 1 |
| Парткод: | FB5-4735-000 |
| Деталь: | ARM, RELEASE |
| Парткод: | FB5-4737-000 |
| Деталь: | ARM, RELEASE |
| Парткод: | FB5-4738-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB5-4739-000 |
| Деталь: | HINGE, CAM |
| Парткод: | FB5-4740-020 |
| Деталь: | BUTTON, CASSETTE |
| Парткод: | FB5-4743-000 |
| Деталь: | PANEL, CASSETTE, FRONT |
| Парткод: | FF6-0094-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS7-2400-000 |
| Деталь: | SCREW,M3X8 |
| Парткод: | XA9-0591-000 |
| Деталь: | PLATE, PAPER LIFTING |
| Парткод: | FB3-2922-000 |
| Деталь: | PLATE, SIDE END |
| Парткод: | FB3-2926-000 |
| Деталь: | RACK, MANUAL |
| Парткод: | FB3-2927-000 |
| Деталь: | PLATE, STOP |
| Парткод: | FB3-2930-000 |
| Деталь: | CLAW, SIDE |
| Парткод: | FB3-2934-000 |
| Деталь: | BLOCK, SLIDER |
| Парткод: | FB3-2953-000 |
| Деталь: | GEAR, 20T |
| Парткод: | FB3-2955-000 |
| Деталь: | RING, GEAR STOP |
| Парткод: | FB3-2956-000 |
| Деталь: | PLATE,PAPER SIZE END |
| Парткод: | FB5-8353-000 |
| Деталь: | PLATE, SIDE END, REAR |
| Парткод: | FF5-4569-020 |
| Деталь: | BODY, CASSETTE |
| Парткод: | FF6-0098-000 |
| Деталь: | BODY, CASSETTE |
| Парткод: | FF6-0099-000 |
| Деталь: | PLATE, STOP, 1 |
| Парткод: | FA9-3313-000 |
| Деталь: | PLATE, STOP, 2 |
| Парткод: | FA9-3314-000 |
| Деталь: | PLATE, SIZE END, FRONT |
| Парткод: | FB3-2928-000 |
| Деталь: | KNOB, FRONT SIDE END PLATE, 1 |
| Парткод: | FB5-3812-000 |
| Деталь: | KNOB, FRONT SIDE END PLATE, 2 |
| Парткод: | FB5-3813-000 |
| Деталь: | BLOCK, SIDE, 2 |
| Парткод: | FF5-4491-000 |
| Деталь: | BLOCK, SIDE, 1 |
| Парткод: | FF5-4548-030 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS5-2650-000 |
| Деталь: | PLATE, CASSETTE PAPER SIZE |
| Парткод: | FB5-9250-000 |
| Деталь: | LABEL, PAPER SUPPLY |
| Парткод: | FS7-8071-000 |
| Деталь: | LABEL, CASSETTE PAPER SIZE |
| Парткод: | FS7-8072-000 |
| Деталь: | LABEL, PAPER HEIGHT |
| Парткод: | FS6-8116-000 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M4X10 |
| Парткод: | XB4-7401-009 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X4 |
| Парткод: | XB1-2300-409 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X8 |
| Парткод: | XB4-7300-809 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X6 |
| Парткод: | XB4-7300-609 |
| Деталь: | CASSETTE |
| Парткод: | NPN |
| Деталь: | PLATE, SENSOR, FRONT |
| Парткод: | FB3-2648-000 |
| Деталь: | PLATE, SENSOR, REAR |
| Парткод: | FB3-2649-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB3-2658-000 |
| Деталь: | CABLE, REGISTRATION FRONT |
| Парткод: | FG3-1596-000 |
| Деталь: | GUIDE, REGIST. FRONT, UPPER |
| Парткод: | FB5-4711-000 |
| Деталь: | FLAG, REGIST. FRONT SENSOR |
| Парткод: | FB5-4713-020 |
| Деталь: | ROLLER, REGISTRATION FRONT, 2 |
| Парткод: | FB5-4714-000 |
| Деталь: | FLAG, REGISTRATION FRONT, 2 |
| Парткод: | FB5-5146-000 |
| Деталь: | SCREW,RS,M4X16 |
| Парткод: | FB5-5288-000 |
| Деталь: | SHEET, REGISTRATION FRONT, 1 |
| Парткод: | FB5-4722-020 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1949-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | RUBBER, NOISE PREVENTION |
| Парткод: | FB5-5150-000 |
| Деталь: | SHEET, REGISTRATION FRONT, 2 |
| Парткод: | FB5-5281-000 |
| Деталь: | SHEET, REGISTRATION FRONT, 3 |
| Парткод: | FB5-5282-000 |
| Деталь: | SHEET, REGISTRATION FRONT, 4 |
| Парткод: | FB5-5283-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-6319-024 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-800 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | REGIST. FRONT GUIDE ASSEMBLY |
| Парткод: | NPN |
| Деталь: | CABLE, ENVIRONMENT SENSOR |
| Парткод: | FF3-4172-000 |
| Деталь: | FAN |
| Парткод: | FH6-1852-000 |
| Деталь: | HUMIDITY SENSOR UNIT |
| Парткод: | FH7-7559-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-003 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-004 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M3X8 |
| Парткод: | XB4-7300-809 |
| Деталь: | SCREW,TAPPING,TRUSS HEAD,M4X35 |
| Парткод: | XB4-7403-509 |
| Деталь: | DEVELOPING FAN ASSEMBLY |
| Парткод: | FG6-5638-000 |
| Деталь: | BUSHING |
| Парткод: | FA1-0056-000 |
| Деталь: | KNOB |
| Парткод: | FB1-7214-000 |
| Деталь: | PIN, POSITIONING |
| Парткод: | FB3-2214-000 |
| Деталь: | BLOCK, MULTI FEED TRAY, STOP |
| Парткод: | FB3-2829-000 |
| Деталь: | ROLLER, REGISTRATION, LOWER |
| Парткод: | FF6-0086-000 |
| Деталь: | ROLLER, REGISTRATION, UPPER |
| Парткод: | FF6-0097-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS2-2783-000 |
| Деталь: | BUSHING, REGISTRATION, UPPER |
| Парткод: | FS5-1261-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1944-000 |
| Деталь: | GEAR, 29T |
| Парткод: | FS7-0738-000 |
| Деталь: | BUSHING, LEFT VERTICAL PATH |
| Парткод: | FB5-5175-000 |
| Деталь: | ROLLER, BELT ADJUSTING |
| Парткод: | FB5-4726-000 |
| Деталь: | SPRING, LEAF, GROUNDING |
| Парткод: | FB5-4727-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | FB5-5289-000 |
| Деталь: | BUSHING |
| Парткод: | FS5-1589-000 |
| Деталь: | PULLEY, 40T/GEAR, 16T |
| Парткод: | FS5-3821-000 |
| Деталь: | PULLEY, 40T |
| Парткод: | FS5-3822-000 |
| Деталь: | PULLEY, 40T |
| Парткод: | FS5-3823-000 |
| Деталь: | PULLEY, 40T |
| Парткод: | FS5-3831-000 |
| Деталь: | GEAR, 16T |
| Парткод: | FS6-0572-000 |
| Деталь: | GEAR, 38T |
| Парткод: | FS7-0760-000 |
| Деталь: | SCREW,M3X8 |
| Парткод: | XA9-0591-000 |
| Деталь: | PAPER PICK-UP ASSEMBLY |
| Парткод: | FG6-5644-130 |
| Деталь: | BELT, TIMING |
| Парткод: | XF2-3110-840 |
| Деталь: | BELT, TIMING |
| Парткод: | XF2-3113-140 |
| Деталь: | BEARING, BALL |
| Парткод: | XG9-0250-000 |
| Деталь: | LINK, SIDE REGISTRATION |
| Парткод: | FB5-9801-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FB3-2996-000 |
| Деталь: | BLOCK, SIDE REGIST. SENSOR |
| Парткод: | FB5-4720-000 |
| Деталь: | CABLE, SIDE REGIST. SENSOR |
| Парткод: | FF3-4174-000 |
| Деталь: | MOTOR, STEPPING, DC24V |
| Парткод: | FH6-1253-000 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | FH7-7462-000 |
| Деталь: | GEAR, 56T/14T |
| Парткод: | FS7-0750-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB5-9789-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FB5-9809-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5565-000 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-402 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-502 |
| Деталь: | RING,E |
| Парткод: | XD2-1100-642 |
| Деталь: | SCREW,RS TOOTHED LOCK,M4X8 |
| Парткод: | XB3-7400-809 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XB3-6300-609 |
| Деталь: | SCREW,RS,M3X8 |
| Парткод: | XB3-6300-800 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X6 |
| Парткод: | XB1-2300-609 |
| Деталь: | INTERNAL COMPONENTS 2 |
| Парткод: | NPN |
| Деталь: | SCREW,RS,M4X10 |
| Парткод: | XA9-0721-000 |
| Деталь: | COVER, RIGHT RAIL |
| Парткод: | FB5-3928-000 |
| Деталь: | SCREW,RS,M3X6 |
| Парткод: | XA9-0626-000 |
| Деталь: | BLOCK, CASSETTE STOP |
| Парткод: | FB3-2937-000 |
| Деталь: | LEVER, CLICK |
| Парткод: | FB5-1471-000 |
| Деталь: | GUIDE, CASSETTE CLICK |
| Парткод: | FB5-4762-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2287-000 |
| Деталь: | HOLDER, PCB |
| Парткод: | FB3-2947-000 |
| Деталь: | COVER, SIZE SENSOR PCB |
| Парткод: | FF6-0112-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FF3-1171-000 |
| Деталь: | SCREW,STEPPED,M4 |
| Парткод: | FS5-9397-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FS6-2311-000 |
| Деталь: | UPPER CASSETTE SIZE PCB ASSY |
| Парткод: | FG3-1617-000 |
| Деталь: | LOWER CASSETTE SIZE PCB ASSY |
| Парткод: | FG3-1618-000 |
| Деталь: | RAIL, RIGHT, LOWER |
| Парткод: | FF6-0087-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FS7-2288-000 |
| Деталь: | RAIL, RIGHT, UPPER |
| Парткод: | FF6-0096-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-006 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-5057-007 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-800 |
| Деталь: | SCREW,RS,M4X8 |
| Парткод: | XB3-6400-805 |
| Деталь: | SCREW,MACH.,TRUSS HEAD,M3X10 |
| Парткод: | XB1-2301-009 |
| Деталь: | SCREW,TP,M4X6 |
| Парткод: | XB6-7400-609 |
| Деталь: | MACHINE FRONT PLATE |
| Парткод: | NPN |
Коды ошибок
E000-0000
E001-0000
E001-0001
E001-0002
E002-0000
E003-0000
E003-0001
E007-0000
E010-0000
E014-000
E019-0000
E032-0001
E051-0000
E064-0000
E100-0001
E100-0002
E100-0003
E110-0000
E202-0001
E202-0002
E204-0001
E220-0001
E225-0000
E225-0002
E240-0000
E243-0000
E248-0001
E248-0002
E248-0003
E261-0000
E302-0001
E302-0002
E315
E420-0001
E421-0001
E422-0001
E500-0000
E501-0001
E505-0001
E505-0002
E510-0001
E510-0002
E514-0000
E514-0001
E514-0002
E530-0000
E530-0001
E530-0002
E531-0000
E531-0001
E531-0002
E531-0003
E532-0001
E532-0002
E537-0000
E537-0001
E537-0002
E540-0001
E540-0002
E540-0003
E577-0000
E577-0001
E577-0002
E577-0003
E577-0004
E580-0000
E585-0000
E590-0001
E590-0002
E592-0001 ... E592-0005
E592-0006
E593-0001
E593-0002
E5F1-0001
E5F1-0002
E5F1-0003
E601-0000
E601-0001
E602-0001
E602-0002
E604-0000
E605-0001
E606-0001
E674-0000
E677-0001
E710-0001
E710-0002
E710-0003
E711-0001
E711-0002
E711-0003
E712-0001
E712-0002
E713-0000
E716-0000
E717-0001
E719-0000
E719-0001
E719-0002
E732-0001
E733-0001
E737-0000
E740-0001
E740-0002
E740-0003
E741-0000
E743-0000
E744-0000
E803-0000
E805-0001
E805-0002
E805-0003
E805-0004
E805-0005
E901-0000
Описание
| Error code: | E000-0000 |
| Description: | Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
| Causes: | The detection temperature of the main thermistor did not increase after start of the power distribution to the heater. |
| Remedy: | - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0000 |
| Description: | Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
| Causes: | The main thermistor detected a temperature of higher than 255 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0001 |
| Description: | Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control. |
| Causes: | The sub thermistor detected a temperature of higher than 290 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0002 |
| Description: | Abnormally high temperature rise of fixing unit (circuit trouble) When fixing sub-thermistor 1 has detected a high temperature (ASIC detection) |
| Causes: | The fixing film unit is faulty (i.e., the thermistor has a short circuit). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service move: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the connection of the connector in the thermistor wiring (wirepinching, disconnection). Replace the fixing unit. Replace the IH unit, halogen heater, fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E002-0000 |
| Description: | Low temperature during temperature control. The target temperature is not reached during temperature control. |
| Causes: | The fixing film unit is faulty (i.e., the main thermistor TH1 has poor contact, or the fixing heater is faulty). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>FCLEAR>ERR. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E003-0000 |
| Description: | Abnormally low temperature (detected by main thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
| Causes: | The main thermistor detected a temperature of lower than 120 degree C for more than 1 second when 20 seconds elapsed after start of the power distribution to the heater. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E003-0001 |
| Description: | Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
| Causes: | The sub thermistor detected a temperature of lower than 80 degree C for more than 2 seconds when 20 seconds elapsed after start of the power distribution to the heater. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E007-0000 |
| Description: | Fixing film sensor failure The fixing film sensor is faulty. |
| Causes: | The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR |
| Remedy: | - Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB. |
| Error code: | E010-0000 |
| Description: | Main motor failure The main motor is faulty. |
| Causes: | The main motor (M2) is faulty. the DC controller PCB is faulty. |
| Remedy: | - Check the connector of the main motor. - Replace the main motor. - Replace the DC controller PCB. |
| Error code: | E014-000 |
| Description: | After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec |
| Causes: | The fixing motor (M19) is faulty. The DC controller PCB is faulty. |
| Remedy: | 1. Connector Is the connector of the fixing motor connected? NO: Connect the connector. 2. Main power supply PCB Is the drive voltage (24 V) of the fixing motor supplied by the main power supply PCB? Main power supply PCB: between J202-3 (24VU1-S) and J202-4 (OVU1) NO: Replace the main power supply PCB. 3. Fixing motor (M19), DC controller PCB Press the Start key. Is the lock signal of the fixing motor present at the connector (J312) on the DC controller PCB? Lock signal: J312-B4 (FSRM_LOCK*) the DC controller PCB change from 0 to about 5 V? YES: Replace the fixing motor. NO: Replace the DC controller PCB. |
| Error code: | E019-0000 |
| Description: | Waste toner full detection The waste toner full state was detected. |
| Causes: | The waste toner case is full. The waste toner case full detection mechanism is soiled. The waste toner sensor is faulty. The DC controller PCB is faulty. Caution To clear the error, dispose of the waste toner, and turn off and then on the main power switch. |
| Remedy: | Replace the drum unit. |
| Error code: | E032-0001 |
| Description: | NE controller counter operation failure When the counter function of the NE controller does not work |
| Causes: | The DA unit is faulty. The main controller PCB is faulty. |
| Remedy: | Check the cable connections. |
| Error code: | E051-0000 |
| Description: | At start-up, home position is not detected when the horizontal registration assembly is moved 100 mm in the direction of home position |
| Causes: | The horizontal home position sensor is faulty. The horizontal registration motor is faulty. The DC controller PCB is faulty. |
| Remedy: | 1. Connector Are the connectors of the horizontal registration home position sensor and the horizontal registration motor connected? a. DC controller PCB (J304) <-> relay connector <-> horizontal registration home position sensor b. DC controller PCB (J304) <-> relay connector <-> horizontal registration motor NO: Connect the connectors. 2. Sensor lever (damage and interference), Sensor Is abnormal noise heard from the horizontal registration assembly in keeping with the motor rotation? YES: a. The horizontal registration assembly is out of place because of damage to the sensor lever. Replace the sensor lever. b. The horizontal registration assembly malfunctions because of the presence of foreign matter. Remove the foreign matter. c. The sensor is faulty and cannot detect home position. Replace the sensor. 3. Horizontal registration motor, DC controller PCB Is the horizontal registration motor control signal generated by the DC controller PCB? J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal YES: The horizontal registration motor is faulty. Replace the motor. NO: Replace the DC controller PCB. |
| Error code: | E064-0000 |
| Description: | The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage) |
| Causes: | The contact has poor connection. The wiring is faulty. The composite power supply PCB is faulty. The DC controller PCB is faulty. proce |
| Remedy: | 1. Contact Is any of the contacts of the primary charging roller, developing assembly, or transfer charging roller soiled? Or, is there poor contact? YES: Clean the contact, and set it once again. 2. Wiring Is the wiring between the contacts for the following normal: DC controller PCB (J301), composite power supply PCB (J136), primary charging roller, developing assembly, transfer charging roller? a. DC controller PCB (J301) <-> composite power supply PCB (J136) b. composite power supply PCB (J130-7) <-> primary charging roller contact c. composite power supply PCB (J130-1) <-> developing assembly contact d. composite power supply PCB (FT133) <-> transfer roller contact NO: Correct the connection. 3. Composite power supply PCB, DC controller PCB Try replacing the composite power supply PCB. Is the problem corrected? YES: Yes. NO: Replace the DC controller PCB. |
| Error code: | E100-0001 |
| Description: | Error detection on any of scanner motor, laser unit, and BD detection at scanner area. |
| Causes: | Magenta optical assembly failure |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Laser Scanner Unit. (2) Replace the DC Controller Board. |
| Error code: | E100-0002 |
| Description: | Optical assembly error (Laser) |
| Causes: | Cyan optical assembly failure |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E100-0003 |
| Description: | Optical assembly error (Laser) |
| Causes: | Black optical assembly failure |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E110-0000 |
| Description: | Optical assembly error (Scanner motor) |
| Causes: | Optical assembly error (Scanner motor initial operation failure) |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E202-0001 |
| Description: | Reader HP sensor fault |
| Causes: | Reader HP outward fault The CCD unit moves backward, but does not move to the home position. |
| Remedy: | - Replace reader HP sensor. - Replace reader motor sensor. - Replace reader unit. |
| Error code: | E202-0002 |
| Description: | Contact Sensor HP error, Failure in return |
| Causes: | Reader HP homeward fault - Replace reader unit. The CCD unit moves forward, but does not move to the home position. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor. (3) Replace the Contact Sensor. (4) Replace the Main Controller Board. |
| Error code: | E204-0001 |
| Description: | While an original is being read, the image leading edge signal does not arrive from the ADF |
| Causes: | The ADF controller PCB is faulty. The reader controller PCB is faulty. Caution When this code occurs, no code is indicated, but the keys are locked. The code may be checked in service mode: COPIER>DISPLAY>ERR. |
| Remedy: | 1. Read sensor (S2) Try replacing the read sensor of the ADF. Is the problem corrected? YES: End. 2. ADF controller PCB, Reader controller PCB Try replacing the ADF controller PCB. Is the problem corrected? YES: End. NO: Replace the reader controller PCB. |
| Error code: | E220-0001 |
| Description: | A fault is detected on the inverter PCB for the scanning lamp |
| Causes: | The inverter PCB is faulty. The reader controller PCB is faulty. |
| Remedy: | 1. Wiring Is the wiring from the scanning lamp to the reader controller PCB normal? NO: Connect the connector firmly, and correct or replace the wiring. 2. Inverter PCB, Reader controller PCB Try replacing the lamp inverter PCB. Is the problem corrected? YES: End. NO: Replace the reader controller PCB. |
| Error code: | E225-0000 |
| Description: | Error in light intensity of the lamp |
| Causes: | Decrease of light intensity of the lamp. |
| Remedy: | Replace reader unit. |
| Error code: | E225-0002 |
| Description: | The light intensity of the CIS is faulty. During DF stream reading, the sheet-to-sheet light intensity is faulty. |
| Causes: | The scanning lamp is faulty. The CCD PCB is faulty. The rear controller PCB is faulty. |
| Remedy: | Disconnect and then connect the flexible cable. Replace the following as necessary: flexible cable, CIS, reader controller PCB. |
| Error code: | E240-0000 |
| Description: | Error in communication between main controller and DC controller Serial communication error |
| Causes: | The main controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit. |
| Error code: | E243-0000 |
| Description: | Control panel unit error Communication between the main controller and the control panel unit is abnormal. |
| Causes: | The control panel CPU PCB is faulty. The main controller PCB is faulty. |
| Remedy: | Check on connection between the main controller PCB and the control panel unit |
| Error code: | E248-0001 |
| Description: | EEPROM access error |
| Causes: | Error at EEPROM power-on EEPROM data cannot be read at power-on. |
| Remedy: | Replace reader unit. |
| Error code: | E248-0002 |
| Description: | EEPROM access error |
| Causes: | Error in EEPROM writing EEPROM writing cannot be performed. |
| Remedy: | Replace reader unit. |
| Error code: | E248-0003 |
| Description: | EEPROM access error |
| Causes: | Error in EEPROM reading after writing EEPROM reading cannot be performed after writing is performed. |
| Remedy: | Replace reader unit. |
| Error code: | E261-0000 |
| Description: | Zero-cross signal error If failed to detect zero-cross signal cycle of the power supply when initializing. When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment. |
| Causes: | The wiring is faulty (short circuit, open circuit). The main power supply PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | - Replace the power supply PCB. - Replace the DC controller PCB. |
| Error code: | E302-0001 |
| Description: | Shading error |
| Causes: | When the light intensity is below the reference level at shading |
| Remedy: | 1. Disconnect and then connect the Flexible Cable. 2. Replace the Flexible Cable. 3. Replace the CIS Unit. 4. Replace the Main Controller PCB (PCB2). |
| Error code: | E302-0002 |
| Description: | Shading error |
| Causes: | Image sampling for shading was not completed. |
| Remedy: | 1. Turn OFF and then ON the main power. 2. Check the connection of the harness. 3. Replace the Main Controller PCB. 4. Replace the Reader Unit. |
| Error code: | E315 |
| Description: | Any of the following is true in the image processing by the main controller: The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault |
| Causes: | The image data is faulty. The main controller PCB is faulty. The HDD is faulty. |
| Remedy: | If this error occurs during normal copying or printing, the job in question (image data) is cleared when the main power switch is turned off and then on again; i.e., the machine will be reset. If this error occurs frequently, however, a fault on the main controller PCB is a possibility. Further, if this error occurs in a specific image within the MAIL BOX, damage in data may be assumed; be sure to delete the image from the MAIL BOX. |
| Error code: | E420-0001 |
| Description: | When the power switch of the host machine is turned on, the back-up data from the EEPROM cannot be read or the data that has been read has a fault |
| Causes: | The EEPROM is faulty. The ADF controller PCB is faulty. |
| Error code: | E421-0001 |
| Description: | The back-up data cannot be written to the EEPROM, or the data that has been written has a fault |
| Causes: | The EEPROM has a fault. The ADF controller PCB has a fault. |
| Error code: | E422-0001 |
| Description: | While the ADF is in standby, the communication with its host machine is disrupted for 5 sec or more; or, while the ADF is in operation, the communication with its host machine is disrupted for 0.5 sec or more |
| Causes: | The IPC communication is faulty. The communication line has an open circuit. The ADF controller PCB is faulty. |
| Error code: | E500-0000 |
| Description: | The communication between the copier and the finisher is disrupted and is not corrected for 5 sec or less |
| Causes: | The copier harness is faulty. (disconnected connector, open circuit) The finisher controller PCB or the copier’s DC controller PCB is faulty. |
| Error code: | E501-0001 |
| Description: | The communication between the finisher controller PCB and the puncher drive PCB is disrupted |
| Causes: | The finisher controller PCB is faulty. The puncher drive PCB is faulty. |
| Error code: | E505-0001 |
| Description: | Finisher backup memory error When the checksum value calculated by the CPU differs from the checksum values of the data held inside the RAM |
| Causes: | The backup RAM is faulty. |
| Remedy: | Replace the finisher controller PCB. |
| Error code: | E505-0002 |
| Description: | Finisher backup memory error When the verify processing is not completed even after 2000 ms have elapsed during data writing |
| Causes: | The EEPROM is faulty. The finisher controller PCB is faulty. The puncher driver PCB is faulty. |
| Remedy: | Replace the finisher controller PCB. |
| Error code: | E510-0001 |
| Description: | The feeding roller does not leave home position when the feed motor is driven for 2 sec |
| Causes: | The feed motor (M1) is faulty. The setting roller home position sensor is faulty. The finisher controller PCB is faulty. |
| Error code: | E510-0002 |
| Description: | The feeding roller does not return to home position when the feed motor is driven for 2 sec |
| Causes: | The feed motor (M1) is faulty. The setting roller home position sensor is faulty. The finisher controller PCB is faulty. |
| Error code: | E514-0000 |
| Description: | At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
| Causes: | The stack handling motor (M2) is faulty. The stack delivery lever home position sensor (S8) is faulty, the connector is disconnected, or an open circuit exits. The stack handling motor (M2) relay harness is faulty. The return roller is faulty |
| Error code: | E514-0001 |
| Description: | End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time. |
| Causes: | The stack delivery motor (M3) is faulty. The delivery belt home position motor (PI7) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39) |
| Error code: | E514-0002 |
| Description: | End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the end assist motor rotates for a specific period of time. |
| Causes: | The stack delivery motor (M3) is faulty. The delivery belt home position motor (PI7) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39) |
| Error code: | E530-0000 |
| Description: | The alignment motor (M4) is driven for a specific number of rotations, but the aligning plate home position sensor (S7) does not go ON. The alignment motor (M4) is driven for a specific number of rotations, but the aligning plate home position sensor (S7) does not go OFF |
| Causes: | The rear alignment motor (M4) is faulty. The rear aligning plate home position sensor (S7) is faulty. The rear alignment motor relay harness is faulty. The rear aligning plate is subjected to an excess load. |
| Error code: | E530-0001 |
| Description: | There is a fault in alignment. Finisher-N1/Saddle Finisher-N2 There is an excess load on the alignment motor (M3), aligning plate home position sensor (PI6), or aligning plate. The aligning plate does not leave the aligning plate home position sensor when the alignment motor has been driven for 2 sec. |
| Causes: | The alignment motor (M3) is faulty. The alignment plate home position sensor (PI6) is faulty. |
| Remedy: | Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33) |
| Error code: | E530-0002 |
| Description: | There is a fault in alignment. Finisher-N1/Saddle Finisher-N2 There is an excess load on the rear alignment motor (M3), rear aligning plate home position sensor (PI6), or rear aligning plate. The aligning plate does not return to its home position when the aligning plate motor has been driven for 2 sec. |
| Causes: | The alignment motor (M3) is faulty. The alignment plate home position sensor (PI6) is faulty. |
| Remedy: | Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33) |
| Error code: | E531-0000 |
| Description: | The stapling home position sensor (S16) does not go off 0.5 sec after the stapler motor is rotated CW. The stapling home position sensor (S16) dos not go ON with 0.5 sec after the stapler motor is rotated CW and, thereafter, the sensor does not go ON within 0.5 sec after the motor is rotated in reverse |
| Causes: | The stapler motor (M6) is faulty. The stapling home position sensor (S16) is faulty. The stapler harness is faulty. The finisher controller PCB is faulty. |
| Error code: | E531-0001 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position was not left when 400 ms have lapsed since start of staple operation. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E531-0002 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple home position could not be reached by performing reverse operation for 400 ms. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E531-0003 |
| Description: | The clock signal is disrupted for 1 sec or more while the stapler/folder motor is driven |
| Causes: | The stapler home position sensor (PI19) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI4) is faulty. The finisher controller PCB is faulty. |
| Error code: | E532-0001 |
| Description: | There is a fault in the shift of the stapler. Finisher-N1/Saddle Finisher-N2 The stapler shift motor (M4) or the stapler shift home position sensor (PI7) is faulty. There is a fault in the path of the stapler shift base. The stapler shift base does not leave the stapler shift home position sensor when the stapler shift motor has been driven for 4 sec. |
| Causes: | The stapler shift motor (M4) is faulty. The stapler shift home position sensor (PI7) is faulty. |
| Remedy: | Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35) |
| Error code: | E532-0002 |
| Description: | There is a fault in the shift of the stapler. Finisher-N1/Saddle Finisher-N2 The stapler shift motor (M4) or the stapler shift home position sensor (PI7) is faulty. There is a fault in the path of the stapler shift base. The stapler shift base does not return from the stapler shift home position sensor when the stapler shift motor has been driven for 4 sec. |
| Causes: | The stapler shift motor (M4) is faulty. The stapler shift home position sensor (PI7) is faulty. |
| Remedy: | Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35) |
| Error code: | E537-0000 |
| Description: | The aligning plate home position sensor (S6) does not go ON when the front alignment motor (M3) is driven for a specific number of rotations. The aligning plate home position sensor (S6) does not go OFF when the front alignment motor (M3) is driven for a specific number of rotations |
| Causes: | The front alignment motor (M3) is faulty. The front aligning plate home position sensor (S6) is faulty. The front alignment motor relay harness is faulty. The front aligning plate is subjected to an excess load. |
| Error code: | E537-0001 |
| Description: | Rear alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be OFF after the swing motor rotates for a specific period of time. |
| Causes: | The alignment motor (front; M4) is faulty. The aligning plate home position sensor (front; PI4) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34) |
| Error code: | E537-0002 |
| Description: | Rear alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the swing motor rotates for a specific period of time. |
| Causes: | The alignment motor (front; M4) is faulty. The aligning plate home position sensor (front; PI4) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34) |
| Error code: | E540-0001 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected. |
| Causes: | The tray lift motor (M5) is faulty. The tray lift motor clock sensor 1/2 (PI19/PI20) is faulty. The tray home position sensor (PI8) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E540-0002 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time. |
| Causes: | The tray paper limit detecting switch (MS4) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E540-0003 |
| Description: | - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was operated, but it did not reach the sensor within 300 ms. |
| Causes: | The tray lifter motor (M5) is faulty. The tray lifter motor clock sensor 1/2 (PI19/PI20) is faulty. |
| Remedy: | - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E577-0000 |
| Description: | The return roller does not reach home position when the delivery motor (Ml) has been driven as much as will move it to the return roller home position sensor (S3) |
| Causes: | The delivery motor (M1) or the finisher controller PCB is faulty. The return roller home position sensor (S3) is faulty, the harness connector is disconnected, or an open circuit exits. The delivery motor relay harness is faulty. The return roller is faulty. |
| Error code: | E577-0001 |
| Description: | Paddle error Finisher-P1 The HP sensor fails to be ON within 1500ms after the paper retaining paddle starts to move to its HP. |
| Causes: | The paddle home position sensor (PI2) is faulty. The stack ascent/descent home point sensor Pixx0 is faulty. The paddle motor (M2) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6) |
| Error code: | E577-0002 |
| Description: | Paddle error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the paper retaining paddle starts to move from its HP. |
| Causes: | The paddle home position sensor (PI2) is faulty. The stack ascent/descent home point sensor Pixx0 is faulty. The paddle motor (M2) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6) |
| Error code: | E577-0003 |
| Description: | The stack ascent/descent guide does not leave home position when the paddle motor is driven for 2 sec or more |
| Causes: | The paddle home position sensor (PI2) is faulty. The stack ascent/descent home point sensor Pixx0 is faulty. The paddle motor (M2) is faulty. The finisher controller PCB is faulty. |
| Error code: | E577-0004 |
| Description: | The stack ascent/descent guide does not return to home position when the paddle motor is driven for 2 sec or more |
| Causes: | The paddle home position sensor (PI2) is faulty. The stack ascent/descent home point sensor Pixx0 is faulty. The paddle motor (M2) is faulty. The finisher controller PCB is faulty. |
| Error code: | E580-0000 |
| Description: | The delivery tray upper limit sensor (S13) goes ON while the delivery tray ascent/descent motor (M5) is in operation. The clock signal of the delivery tray ascent/descent motor clock sensor (S9) is not detected 15 times or more within 0.8 sec while the delivery tray ascent/ descent motor (M5) is in operation. The delivery tray paper height sensor (S10) does not go ON 4 sec after the delivery tray ascent/descent motor (M5) starts to move up. The delivery tray paper height sensor (S10) does not go OFF 4 sec after the delivery tray ascent/descent motor (M5) starts to move down |
| Causes: | The delivery tray ascent/descent motor (M5) is faulty. The delivery tray paper height sensor (S10) is faulty, the harness is disconnected, or an open circuit exits. The delivery tray ascent/descent motor lock sensor (S9) is faulty, the connector is disconnected, or an open circuit exits. The delivery tray ascent/descent motor is subjected to an excess load. The finisher controller PCB is faulty. |
| Error code: | E585-0000 |
| Description: | At the start of the motor CCW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
| Causes: | The stack handling motor (M2) is faulty. The stack delivery lever home position sensor (S8) is faulty, the connector is disconnected, or an open circuit exits. The stack handling motor (M2) relay harness is faulty. The return roller is faulty. |
| Error code: | E590-0001 |
| Description: | Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms. |
| Causes: | The puncher home position sensor (PI1P) is faulty. The puncher motor (M1P) is faulty. The puncher motor clock sensor (PI3P) is faulty. The puncher driver PCB is faulty. |
| Remedy: | Replace the puncher HP sensor, Replace the puncher motor |
| Error code: | E590-0002 |
| Description: | Puncher motor error The puncher fails to detect the puncher HP sensor after the puncher motor stops during initial operation. |
| Causes: | The puncher home position sensor (PI1P) is faulty. The puncher motor (M1P) is faulty. The puncher motor clock sensor (PI3P) is faulty. The puncher driver PCB is faulty. |
| Remedy: | Replace the puncher HP sensor, Replace the puncher motor |
| Error code: | E592-0001 ... E592-0005 |
| Description: | In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or more even when the light-emitting voltage is set to 0 V. In the course of sensor output automatic adjustment, the light-emitting voltage is set to 4.4 V or more Horizontal registration sensor |
| Causes: | The horizontal registration sensor is faulty. The puncher waste sensor is faulty. The puncher driver PCB is faulty. |
| Error code: | E592-0006 |
| Description: | Puncher side registration sensor error Light receiving voltage at the time of non-light-emission is abnormal. |
| Causes: | The horizontal registration sensor is faulty. The puncher waste sensor is faulty. The puncher driver PCB is faulty. |
| Remedy: | Replace the side registration sensor 2 |
| Error code: | E593-0001 |
| Description: | Puncher shift motor error The HP sensor fails to be OFF. |
| Causes: | The horizontal registration home position sensor (PI2P) is faulty. The puncher shift motor (M2P) is faulty. The puncher drive PCB is faulty |
| Remedy: | Replace the HP sensor, Replace the puncher shift motor |
| Error code: | E593-0002 |
| Description: | Puncher shift motor error The HP sensor fails to be ON. |
| Causes: | The horizontal registration home position sensor (PI2P) is faulty. The puncher shift motor (M2P) is faulty. The puncher drive PCB is faulty |
| Remedy: | Replace the HP sensor, Replace the puncher shift motor |
| Error code: | E5F1-0001 |
| Description: | There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding motor (M2S) is faulty. The folding motor clock sensor (PI4S) is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F1-0002 |
| Description: | There is an error in saddle paper folding. The state of the paper folding home position sensor does not change when the paper folding motor has been driven for 3 sec. The paper folding motor (M2S) or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F1-0003 |
| Description: | The clock is disrupted for 1 sec or more while the stapler/folder motor is driven |
| Causes: | The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty. |
| Error code: | E601-0000 |
| Description: | Abnormality of image memory Communication error of the image memory (SDRAM) |
| Causes: | The wiring is faulty (short circuit, open circuit). The HDD is faulty. The DC controller PCB is faulty. The main controller PCB is faulty. |
| Remedy: | Replace the SDRAM |
| Error code: | E601-0001 |
| Description: | When an image is transferred between the main controller PCB and the DC controller PCB, the DC controller PCB detects a fault in the control information |
| Causes: | The wiring is faulty (short circuit, open circuit). The HDD is faulty. The DC controller PCB is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Wiring Are the connection and cable between the connector J122 on the DC controller PCB and the connector J1015 on the main controller PCB normal? NO: Correct the connection/cable. 2. DC controller PCB, Main controller PCB Try replacing the DC controller PCB. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E602-0001 |
| Description: | HDD error |
| Causes: | Lack of the HDD capacity The capacity of the HDD installed is smaller than that of the HDD used in the software. |
| Error code: | E602-0002 |
| Description: | HDD error |
| Causes: | Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged. |
| Remedy: | Burn the Bootable CD again. |
| Error code: | E604-0000 |
| Description: | Memory error |
| Causes: | Lack of memory capacity |
| Remedy: | Check the memory capacity inserted to each slot. |
| Error code: | E605-0001 |
| Description: | A fault is detected in the battery for the image memory |
| Causes: | The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty. |
| Error code: | E606-0001 |
| Description: | The hard disk is faulty. A HD mounting error is detected when the HD is booted from BOOT ROM. |
| Causes: | The HDD is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Wiring Are the connection and cable normal between the connector J1025 on the main controller PCB and the connector J2005 of the HDD? NO: Correct the connection and the cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD and downloading the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E674-0000 |
| Description: | The fax board is faulty. |
| Causes: | The wiring is faulty (short circuit, open circuit). The fax PCB is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Wiring Are the connection and the cable between the connector J 1005 on the main controller PCB and the connector J31 on the FAX PCB normal? NO: Correct the connection and the cable. 2. FAX PCB, Main controller PCB Try replacing the FAX PCB. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E677-0001 |
| Description: | DPRAM size error In communication for initialization, the DPRAM size returned by the PDL board to the host machine has an error. (The host machine is aware of the DPRAM size in advance; the DPRAM is a dual-port RAM used for communication between the host machine and the PDL board, and is mounted on the PDL board.) |
| Causes: | The connection between the host machine and the PDL board is faulty. The system software is faulty. The hard disk is faulty. The PDL board is faulty. The system controller PCB of the host machine is faulty. |
| Remedy: | 1. Connector Is the printer board (accessory) connected correctly? NO: Correct the connection. 2. Printer board, Main controller PCB Try replacing the printer board. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E710-0001 |
| Description: | IPC initializing error When the ready status fails to be established within 3 sec. after the IPC chip started up |
| Causes: | The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty. |
| Remedy: | Check the cable connections. |
| Error code: | E710-0002 |
| Description: | There is an error in the initialization of the IPC. The IPC (IC40) on the DC controller PCB cannot be initialized when the main power supply is turned on. |
| Causes: | The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty. |
| Remedy: | - Check the cable. - Replace the DC controller PCB. |
| Error code: | E710-0003 |
| Description: | There is an error in the initialization of the IPC. The IPC (IC1003) on the machine controller PCB cannot be initialized when the main power is turned on. |
| Causes: | The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty. |
| Remedy: | - Check the cable. - Replace the main controller PCB. |
| Error code: | E711-0001 |
| Description: | IPC communication error When error occurrence was set 4 or more times in the error register of the IPC chip within 1.5 sec. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | Check the cable connections. Replace the ADF controller PCB. Replace the reader controller PCB. |
| Error code: | E711-0002 |
| Description: | There is an IPC communication error. An error has been detected 4 times or more within 1.5 sec after the communication has been interrupted between the finisher and the printer, and the machine does not reset. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | Turn off the main power, and check the cable; then, turn on the main power. If the machine fails to reset, check the connector between the finisher and the copier for poor contact; as necessary, replace the finisher controller/DC controller. |
| Error code: | E711-0003 |
| Description: | There is an error in the IPC communication. Data has been written to the error register of the IPC (IC1003) on the main controller PCB 4 times or more within 2 sec. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | - Check the cable. - Replace the main controller PCB. |
| Error code: | E712-0001 |
| Description: | Communication error between the ADF and the reader Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more. |
| Causes: | The connect has poor connection. The main power supply PCB is faulty. The ADF controller PCB is faulty. The reader controller PCB is faulty. |
| Remedy: | Check on connection of the cable, Replace the ADF controller PCB, Replace the reader controller PCB |
| Error code: | E712-0002 |
| Description: | The transmission bit is not enabled 10 sec or more in the sync register of the communication IC (IPC) on e reader controller PCB |
| Causes: | The connect has poor connection. The main power supply PCB is faulty. The ADF controller PCB is faulty. The reader controller PCB is faulty. |
| Remedy: | 1. Connector Is the interface able between the ADF controller PCB and the reader controller PCB normal? NO: Correct the cable. 2. Main power supply PCB While the ADF is in operation, does the voltage between J203-2 (+) and J203-1 (-) on the main power supply PCB change from 0 to about 24 V? NO: Replace the main power supply PCB. 3. ADF controller PCB, Reader controller PCB Try replacing the ADF controller PCB. Is the problem corrected? YES: End. NO: Replace the rear controller PCB. |
| Error code: | E713-0000 |
| Description: | Communication error between the finisher and the printer Communication between the finisher and the copier stops. |
| Causes: | The connector has poor connection. The option power supply PCB is faulty. The finisher controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check on connection of the cable, Replace the finisher controller PCB, Replace the DC controller PCB |
| Error code: | E716-0000 |
| Description: | Erroneous communication with optional cassette Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication. |
| Causes: | The connector has poor connection. The main power supply PCB is faulty. The pedestal controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | - Check the connectors of the optional cassette PCB and DC controller PCB. - Replace the optional cassette PCB for normal connection. - Replace the DC controller PCB. |
| Error code: | E717-0001 |
| Description: | Error in communication with NE controller When the NE controller which was connected before the power was turned OFF could not be recognized when the power was turned back ON |
| Causes: | The wiring is faulty (short circuit, open circuit). The DA unit PCB is faulty. The main controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the cable connections. |
| Error code: | E719-0000 |
| Description: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Causes: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Remedy: | - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB. |
| Error code: | E719-0001 |
| Description: | Error in communication with coin vendor/card reader When the coin vendor which was connected before the power was turned OFF could not be recognized when the power was turned back ON |
| Causes: | The wiring is faulty (short circuit, open circuit). The Card Reader-C1 is faulty. The coin vendor is faulty. The main controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the cable connections. |
| Error code: | E719-0002 |
| Description: | Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Causes: | Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Remedy: | - Check the connection between the image processor PCB and serial PCB. - Check the connectors of the serial PCB and coin vendor for normal connection. - Replace the serial PCB. - Check the coin vendor. - Replace the image processor PCB. |
| Error code: | E732-0001 |
| Description: | Scanner communication error |
| Causes: | Scanner communication error |
| Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB. |
| Error code: | E733-0001 |
| Description: | Printer communication error (Invalid communication after communication is established, Parity error) |
| Remedy: | Turn on the power again. Replace the DC controller PCB. |
| Error code: | E737-0000 |
| Description: | During self diagnosis at power-on, the DRAM check finds a fault in the main controller PCB |
| Causes: | The connection of the IC socket is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Connection Is the DRAM fitted to the socket securely? NO: Fit the DRAM securely. 2. DRAM, Main controller PCB Try replacing the DRAM. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E740-0001 |
| Description: | At power-on, the LAN card has a fault |
| Causes: | The LAN card is faulty. The main controller PCB is faulty. |
| Remedy: | 1. Connector Is the connection between the LAN card and the main controller PCB normal? NO: Correct the connection. 2. LAN card, Main controller PCB Try replacing the LAN card. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E740-0002 |
| Description: | Error detection on either Network Board or Mac address |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of the network cable. (2) Replace the Main Controller Board. |
| Error code: | E740-0003 |
| Description: | Abnormality of the Ethernet board Incorrect network ID is detected at startup. |
| Causes: | The LAN card is faulty. The main controller PCB is faulty. |
| Remedy: | Replace the Ethernet board, Replace the main controller PCB (sub LAN-bar) |
| Error code: | E741-0000 |
| Description: | The PCI bus has a fault |
| Causes: | The PCI bus has poor connection. The main controller PCB is faulty. |
| Remedy: | Each PCI slot may be disabled in service mode to prevent the error: BOARD>PCI1-OFF through PCI3-OFF. 1. Board Is the connection between the relay board and the main controller PCB normal? NO: Correct the connection. 2. Relay board, Main Controller PCB Try replacing the relay board. Is the problem corrected? YES: End. NO: Replace the main controller PCB. |
| Error code: | E743-0000 |
| Description: | Error in main controller communication An error in reading of/writing to the Flash ROM in the Main Controller occurred. |
| Causes: | Software sequence error |
| Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
| Error code: | E744-0000 |
| Description: | The BootROM on the main controller PCB and the system software are for different models or are of different types |
| Causes: | The BootROM is not mounted correctly, or a fault occurred during downloading or when downloading the system software. |
| Remedy: | Downloading (system software) Check the types of the BootROM and the system software, and download system software of the correct type. |
| Error code: | E803-0000 |
| Description: | The 24V output from the composite main power supply PCB is absent for 1 sec or more |
| Causes: | The wiring is faulty (short circuit, open circuit). The composite power supply PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | 1. Connectors Are the connectors J204 on the main power supply PCB and the connector J300 on the DC controller PCB connected securely? NO: Connect the connectors securely. 2. Main power supply PCB Is 24 V supplied by the main power supply PCB (J204) to the DC controller PCB (J300)? (J204-5 <-> J300-5: OVU3, J204-6 <-> J300-6: OVU3, J204-7 <-> J300-7: 24VU3, J204-8 <-> J300-8: 24VU3) NO: Replace the main power supply PCB. YES: Replace the DC controller PCB. |
| Error code: | E805-0001 |
| Description: | Error in duplex cooling fan |
| Causes: | Fan 1 failure |
| Error code: | E805-0002 |
| Description: | Fan Motor 2 error |
| Causes: | The Sub Fan fails to rotate at the specified rotation speed. |
| Remedy: | 1. Check the connection of the Sub Fan. 2. Replace the Sub Fan. |
| Error code: | E805-0003 |
| Description: | Fan failure |
| Causes: | Controller fan failure detected The controller fan does not rotate because some kind of failure occurred in it. |
| Remedy: | Replace the controller fan. |
| Error code: | E805-0004 |
| Description: | Fan error Lock fails to be detected for 5sec continuously while the toner intake fan is driven. Disconnection of the fan connector. Lock signal fails to be sent due to a fan failure. |
| Causes: | The fixing fan has an error. The delivery fan has an error. The machine cooling fan has an error. The power supply cooling fan has an error. The decurling fan has an error. The kit drive cooling fan has an error. The transfer motor cooling fan has an error. |
| Remedy: | Check on connection of the toner intake fan, Replace the toner intake fan |
| Error code: | E805-0005 |
| Description: | Error in duplex cooling fan |
| Causes: | Duplex cooling fan can not rotate the specified number of rotations. Cause Failure in duplex cooling fan, failure in DC controller PCB |
| Remedy: | - Check the connectors of duplex cooling fan and DC controller PCB - Replace the duplex cooling fan |
| Error code: | E901-0000 |
| Description: | The motor ready signal does not arrive within 1.3 sec after the pedestal main motor drive signal is generated |
| Causes: | The connector has poor connector. The pedestal main motor is faulty. The main power supply PCB is faulty. The pedestal controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | 1. Connector Is the wiring between the pedestal controller PCB and the main power supply PCB and between the main power supply PCB and the DC controller PCB normal? NO: Correct the wiring. 2. Main power supply PCB Is the voltage between J206-2 (+) and J206-1 (-) on the main power supply PCB about 24 V? NO: Replace the main power supply PCB. 3. Pedestal main motor Try replacing the pedestal main motor. Is the problem corrected? YES: End. 4. Pedestal controller PCB, DC controller PCB Try replacing the pedestal controller PCB. Is the problem corrected? YES: End. NO: Replace the DC controller PCB. |
